• <button id="8qwe8"></button>
    <kbd id="8qwe8"></kbd>
  • <u id="8qwe8"></u>
  • <strong id="8qwe8"><button id="8qwe8"></button></strong>
  • 13918218772

    QQ:45837332

    yongkan2001

    網站首頁    FIBRO(德國)    德國FIBRO模具配件中國代理商
    驗證碼

    德國FIBRO模具配件中國代理商

    FIBRO-flyer-keilschieber-eco-line-de-gb-fibro-gmbh
    • 德國FIBRO模具配件中國代理商

       

       

      FIBRO-flyer-keilschieber-eco-line-de-gb-fibro-gmbhFIBRO-flyer-fibro-the-safer-choice-gb-fibro-gmbh

       

       

      常用型號檢索:

       


      2131.30.
      Eyebolt
      C25
      2131.32.
      Attachment
      point
      screwable
      profilift
      gamma ring
      nut
      C27
      2131.31.
      Attachment
      point
      screwable
      profilift
      gamma
      C26
      2131.42.
      Double vortex
      ring screw
      Mega DSS
      C37
      2131.50.
      Attachment
      point
      screwable
      profilift eta
      C39
      2131.43.
      Double vortex
      ring with
      internal
      thread
      C38
      2131.39.
      Double vortex
      ring with
      internal
      thread
      C34
      2131.41.
      Double vortex
      ring screw +
      centring
      device
      C36
      2131.40.
      Double vortex
      ring screw
      C35
      2131.36.
      Double vor-
      tice hook
      C31
      2131.38.
      Double vortex
      ring +
      centring
      device
      C33
      2131.37.
      Double vortex
      ring
      C32
      2131.33.
      Load block,
      turnable on
      all sides
      C28
      2131.35.
      Triple vortice
      ring
      C30
      2131.34.
      Attachment
      point
      screwable
      profilift delta
      C29
      New and improved products
      in the FIBRO Standard Parts
      catalogue 2017
      2133.11.
      062.36
      Lifting flange
      with bolt
      2133.11.
      00.15.062.36
      Lifting bolt
      C40
      2133.15.
      Lifting flange
      with bolt
      with safety
      ring, with
      feather key,
      to BMW
      C45
      2133.11.10.
      Lifting flange
      with bolt
      with safety
      ring, to AUDI
      C41
      2192.10.
      Hexagon
      socket head
      cap screw
      C60
      2446.11.55.
      Air pin, acc.
      to VW
      D264
      2446.10.55.
      Pressure bolt
      with base,
      acc. to VW
      D263
      244.10.
      Washer
      F81-82
      2716.
      Punch with
      tapered head,
      stepped,
      round, with
      ejector pin
      E35
      241.19.
      High perfor-
      mance com-
      pression
      spring, 3XLF
      F60
      241.13.
      High perfor-
      mance com-
      pression
      spring, XSF
      F28
      2206.
      Punch with
      tapered head,
      blanc
      E32
      2706.
      Punch with
      tapered head,
      blanc, with
      ejector pin
      E34
      2216.
      Punch with
      tapered head,
      stepped,
      round
      E33
      2443.14.55.
      Position
      monitor for
      boards
      D287
      2443.14.00.
      60.23.
      Cable
      D289
      2443.14.00.
      60.18.044
      Inductive
      proximity
      switch
      D288
      2452.10.
      Slide stop
      F90
      2452.10. .2
      Damping
      unit,
      TUBUS TA
      F97
      244.18.
      Spring and
      spacer unit
      F105
      244.16.
      Spring and
      spacer unit
      F104
      2488.13.
      00750.
      Gas spring
      HEAVy DUTy
      F215
      2470.20. .1
      Spring
      plunger, low
      maintenance,
      standard
      spring force
      F117
      2470.20. .2
      Spring
      plunger, low
      maintenance,
      high spring
      force
      F121
      2470.20. .3
      Spring
      plunger, low
      maintenance,
      medium
      spring force
      F119
      2488.13.
      01500.
      Gas spring
      HEAVy DUTy
      F219
      2497.00.20.
      Adapter base
      plate
      F267-271
      2488.13.
      20000.
      Gas spring
      HEAVy DUTy
      F229
      2478.25.
      00200.
      Lifter unit
      with pillar
      guidance
      F159
      2480.064.
      01000.
      Flange
      F218
      2480.064.
      00500.
      Flange
      F214
      2478.20.
      15.24.
      Holding
      sleeve for
      lifter units to
      BMW
      F154
      2478.25.
      00090.
      Lifter unit
      with pillar
      guidance
      F158
      2478.20.
      15.40.
      Universal
      lifter unit,
      acc. to BMW
      F156
      2497.12.
      Gas spring
      CX, COMPACT
      XTREME
      F267-271
      2480.009.
      Thrust plate
      F364
      2480.011.03.
      07500
      Flange plate
      F312-352
      2480.00.
      30.14
      Controll
      fitting
      F392
      2480.00.
      39.05.
      Multiple
      Controll
      fitting
      F393
      2199.40.1
      Pneumatic
      conveyor
      J31
      2016.4x.
      Stamping
      units
      K8
      (request your
      catalogue)
      2191.
      Sensors
      J42
      (request your
      catalogue)
      A
      B
      C
      D
      E
      F
      G
      H
      J
      K
      L
      Die Sets
      Cast iron, steel and aluminium die set press units
      Lamination die set units, tooling pallet die sets
      Precision Ground Plates and Flat Bars
      Steel and aluminium plates, flat and square tool steels
      Precision feeler gauges, foil shims
      Lifting and Clamping Devices
      Shanks, lifter studs, eyebolts
      Clamping claws, screws and bolts
      Guide elements
      Pillars, bushes, mounting flanges, ball cages, oilless guide elements
      Ground Precision Components
      Punches and matrixes, Pins, gauge pins
      Springs
      Compression springs, gas springs, elastomer springs
      Spring and spacer units
      Elastomer-Bars, -Sheets, -Sections
      FIBROFLEX® and FIBROELAST®-sheets and -profiles
      FIBRO Chemical Tooling Aids
      Tooling resin, metal adhesives, oils ang greases
      Peripheral Equipment
      for presses, tool manufacture, assembly aids
      Conveyor belts, pneumatic conveyors, electric conveyors
      Cam Units
      Flex cam, cam slide units, roller slide units
      Standard Parts for Mould Making
      Hassmersheim plant
      Standard Parts
      Today the Standard Parts Division operates from the Hass-
      mersheim and Weinsberg works, which manufacture a com-
      prehensive range of standard parts and maintain stocks ready
      for immediate despatch world-wide.
      The machine tool, mechanical engineering and systems
      engineering product ranges have been developed to meet the
      needs of customers.
      They include die sets, precision ground plates and flat bars,
      lifting and clamping devices, guide elements, oilless guide
      elements and precision components such as punches and
      matrixes, special steel compression springs, gas springs,
      forming materials, metal bonding agents, moulding resins,
      peripheral equipment for pressing and tool making, electronic
      thread molding units, tool slides with cam or roller slides and
      hydraulic cam systems.
      FIBRO has become renowned world-wide for its comprehen-
      sive range of products in stock and its readiness to deliver.
      FIBRO – an internationally successful company.
      As a market leader in Standard Parts and Rotary Indexing
      Tables, FIBRO provides products and solutions to ensure your
      production keeps moving.
      So what is the secret of the FIBRO success?
      Products developed in-house, tailor-made for the market with
      uncompromising quality.
      But good products are not enough on their own.
      FIBRO combines excellent products, the know-how and
      service competence of an internationally focused company,
      matched to the actual needs of customers - wherever they are.
      FIBRO – your production partner
      6
      Rotary Tables
      FIBRO – The worldwide pioneer in the field of rotary tables
      A comprehensive range of types:
      FIBROPLAN ® – NC rotary table with worm drive
      FIBRODYN ® – NC rotary table with direct torque drive
      FIBROMAX ® – Heavy-duty NC rotary table with Twin Drive
      FIBROTAKT ® – Rotary indexing table with Hirth face gear
      FIBROTOR ® – Electromechanical rotary indexing table for
      applications that do not involve machining
      Rotary tables for all applications – from flexible workpiece
      positioning through rotary and multiple-axis machining to
      assembly automation
      Used in all branches of industry – from the automobile industry
      through solar energy to machine tools
      A wide range of sizes – from micro-machining to processing of
      very large parts
      Customer-oriented design – from the standard modular table
      to customer-specific special solutions
      FIBRO is customer-focused – world-wide. A well-developed
      network of sales and service points and strategic partners
      ensure that help is always at hand. This ensures technical
      advance, world-wide experience in applications and rapid
      availability of products.
      Facts and figures on FIBRO:
      - founded 1958
      - approximately 770 staff
      - more than 70 representatives and service stations
      world-wide
      - branches in France, USA, India, Switzerland, Singapore,
      Korea and China
      - ISO 9001:2000 Quality Assurance and
      ISO 14001 environmental certification
      Manufacturing of precision parts
      Hassmersheim plant
      Standard Parts
      Today the Standard Parts Division operates from the Hass-
      mersheim and Weinsberg works, which manufacture a com-
      prehensive range of standard parts and maintain stocks ready
      for immediate despatch world-wide.
      The machine tool, mechanical engineering and systems
      engineering product ranges have been developed to meet the
      needs of customers.
      They include die sets, precision ground plates and flat bars,
      lifting and clamping devices, guide elements, oilless guide
      elements and precision components such as punches and
      matrixes, special steel compression springs, gas springs,
      forming materials, metal bonding agents, moulding resins,
      peripheral equipment for pressing and tool making, electronic
      thread molding units, tool slides with cam or roller slides and
      hydraulic cam systems.
      FIBRO has become renowned world-wide for its comprehen-
      sive range of products in stock and its readiness to deliver.
      FIBRO – an internationally successful company.
      As a market leader in Standard Parts and Rotary Indexing
      Tables, FIBRO provides products and solutions to ensure your
      production keeps moving.
      So what is the secret of the FIBRO success?
      Products developed in-house, tailor-made for the market with
      uncompromising quality.
      But good products are not enough on their own.
      FIBRO combines excellent products, the know-how and
      service competence of an internationally focused company,
      matched to the actual needs of customers - wherever they are.
      FIBRO – your production partner
      Rotary Tables
      FIBRO – The worldwide pioneer in the field of rotary tables
      A comprehensive range of types:
      FIBROPLAN ® – NC rotary table with worm drive
      FIBRODYN ® – NC rotary table with direct torque drive
      FIBROMAX ® – Heavy-duty NC rotary table with Twin Drive
      FIBROTAKT ® – Rotary indexing table with Hirth face gear
      FIBROTOR ® – Electromechanical rotary indexing table for
      applications that do not involve machining
      Rotary tables for all applications – from flexible workpiece
      positioning through rotary and multiple-axis machining to
      assembly automation
      Used in all branches of industry – from the automobile industry
      through solar energy to machine tools
      A wide range of sizes – from micro-machining to processing of
      very large parts
      Customer-oriented design – from the standard modular table
      to customer-specific special solutions
      FIBRO is customer-focused – world-wide. A well-developed
      network of sales and service points and strategic partners
      ensure that help is always at hand. This ensures technical
      advance, world-wide experience in applications and rapid
      availability of products.
      Facts and figures on FIBRO:
      - founded 1958
      - approximately 770 staff
      - more than 70 representatives and service stations
      world-wide
      - branches in France, USA, India, Switzerland, Singapore,
      Korea and China
      - ISO 9001:2000 Quality Assurance and
      ISO 14001 environmental certification
      Manufacturing of precision parts
      7
      DE
       Außendienst Andreas Otto
       Immenweg 3 · 16356 Ahrensfelde OT Eiche
       T +49 30 423 97 15 · M +49 170 739 00 64
       a.otto@fibro.de
      PLZ 10000-19000
       Walter Ruff GmbH
       Heerenholz 9 · 28307 Bremen
       T +49 421 43878 0 · F +49 421 43878 22
       mail@praeziruff.de · www.praeziruff.de
      PLZ 20000-28000, 49000
       Außendienst Jörg Dyck
       Walter Ruff GmbH
       Postfach 450118 · 28295 Bremen
       T +49 421 43878 0 · F +49 421 43878 22
       M +49 173 9252243 · mail@praeziruff.de
      PLZ 29000-31000, 37000-39000
       Außendienst Dirk Bechinka
       Neuer Kamp 74 · 32584 Löhne
       M +49 170 5760009 · d.bechinka@fibro.de
      PLZ 32000-34000, 48000, 49000
       Außendienst Ralf Feldmann
       Wiesenstraße 23b · 58339 Breckerfeld
       M +49 151 12590159 · r.feldmann@fibro.de
      PLZ 35000-36000, 57000, 60000, 61000, 65000
       Außendienst Lars Jahncke
       Locher Straße 44 · 42719 Solingen
       T +49 212 2543462 · F +49 212 2543390
       M +49 170 7637125 · l.jahncke@fibro.de
      PLZ 42000, 44000-46000, 58000-59000
       Außendienst Hartwig Hennemann
       Staubenthaler Höhe 79 · 42369 Wuppertal
       T +49 202 283 17 56 · F +49 202 759 55 80
       M +49 175 29 659 30
       h.hennemann@fibro.de
      PLZ 40000-41000, 42000, 47000, 50000-53000,
       Außendienst Oliver Koop
       Burgstraße 14 · 66780 Rehlingen-Siersburg
       T +49 6835 923 28 10 · F +49 6835 608 59 09
       M +49 175 438 53 81 · o.koop@fibro.de
      PLZ 54000-55000, 56000, 66000
       Außendienst Matthias Ehrenfried
       Steigerwaldstraße 25 · 74172 Neckarsulm
       T +49 7132 34 56 90 · F +49 7132 98 94 82
       M +49 171 864 95 52
       m.ehrenfried@fibro.de
      PLZ 71000, 74000, 75000, 97000
       Außendienst Manfred Wagner
       Breslauer Straße 57 · 74372 Sersheim
       T +49 7042 350 86 · F +49 7042 37 48 20
       M +49 170 563 52 30
       m.wagner@fibro.de
      PLZ 70000, 71000, 72000, 73000, 88000, 89000
       Außendienst Markus Rössl
       Johann-Strauß-Straße 16/1
       74906 Bad Rappenau
       T +49 7264 20 64 17 · F +49 7264 20 64 18
       M +49 160 97 25 23 93
       m.roessl@fibro.de
      PLZ 63000, 64000, 67000, 68000, 69000,
       76000, 77000
       Außendienst Matthias Jörg
       In der Krautbündt 44
       77656 Offenburg-Zunsweile
       M +49 151 21 28 25 00 · m.joerg@fibro.de
      PLZ 72000, 77000, 78000-79000, 88000
       Jugard + Künstner GmbH
       Landsberger Straße 289 · 80687 München
       T +49 89 546 15 60 · F +49 89 580 27 96
       muc@jugard-kuenstner.de
       www.jugard-kuenstner.de
      PLZ 80000-87000, 88000, 89000
       Jugard + Künstner GmbH
       Weidentalstraße 4 · 90518 Altdorf bei Nürnberg
       T +49 9187 936 69-0 · F +49 9187 936 69-90
       nbg@jugard-kuenstner.de
       www.jugard-kuenstner.de
      PLZ 90000-96000, 97000
       HELD Werkzeugmaschinen
       Präzisionswerkzeuge GmbH
       Sorge 34 · 07545 Gera
       T +49 365 824 91 0 · F +49 365 824 91 11
       info@held-wzm.de · www.held-wzm.de
      PLZ 01000-09000, 98000-99000
      AT Rath & Co. Ges. m.b.H.
       Teiritzstrasse 3 · 2100 Korneuburg
       T +43 2262 608 0 · F +43 2262 608 60
       office@rath-co.at · www.rath-co.at
      AU Bruderer Presses Australia Pty. Ltd.
       92 Trafalgar Street · Annandale, NSW 2038
       T +61 419 400 995 · F +61 296 864 809
       Brudsyd@tpgi.com.au
      BA Oro-Tech trgovina d.o.o.
       Ulica borcev 1/b · SI-2000 Maribor
       T +386 2 426 08 43 · F +386 2 426 08 44
       oro-tech.trgovina@siol.net
      BE Schiltz s.a.
       Rue Nestor Martin 315 · 1082 Bruxelles
       T +32 2 464 4830 · F +32 2 464 4839
       info@schiltz.be · www.schiltz-norms.be
      BG Bavaria 2002 EOOD
       Patriarh Evtimii 10
       5100 Gorna Orjachoviza
       T +359 618 64158 · F +359 618 64960
       bavaria2002@gorna.net
       www.bavaria2002.hit.bg
      BR Industécnica Equipamentos
       Industriais Ltda.
       Rua Jose Geraldo Alves Cursino, 414
       04773-120 São Paulo
       T +55 11 5548 4333 · F +55 11 5522 4400
       industecnica@fixo.com.br
       www.industecnica.com.br
      CA FIBRO Inc.
       139 Harrison Ave. · Rockford, IL 61104
       P. O. B. 5924 · Rockford, IL 61125
       T +1 815 229 1300 · F +1 815 229 1303
       info@fibroinc.com · www.fibro.com
      CH Außendienst David Lindauer
       Mühlegasse 18 · 6422 Steinen
       M +41 76 417 32 39
       d.lindauer@fibro.de · www.fibro.com
      CL Bermat S.A.
       Coyancura 2283, Of. 601
       Casilla 9781 · Santiago
       T +56 2 231 88 77 · F +56 2 231 42 94
       bermat@bermat.cl · www.bermat.cl
      CN FIBRO (Shanghai) Precision Products Co., Ltd.
       1 st Floor, Building 3, No. 253, Ai Du Road
       Pilot Free Trade Zone, Shanghai 200131
       T +86 21 6083 1596 · F +86 21 6083 1599
       info@fibro.cn · www.fibro.com
       Jilin Province Feibo Tooling Standard Parts Co., Ltd.
       Add: Room303, No. 5470, Xi’an Avenue,
       Luyuan District, Changchun City, Jilin Province
       T +86 431 8120 3792 · F +86 431 8120 3792
       feibomuju@sina.cn · www.fibro.com
       Shenzhen Poleda Investment Co.,Ltd.
       Add: 4/F, SED Technology Tower,
       No.1 Keji Road, Hi-tech Industrial Park,
       Nanshan District, Shenzhen
       T +86 755 2398 5026/2398 5029
       F +86 755 2398 5596
       anson@poleda.cn · www.fibro.com
      CY Militos Trading Ltd.
       P.O.B. 27297 · 1643 Nicosia
       T +357 22 75 12 56 · F +357 22 75 22 11
       militos@cytanet.com.cy
      VVB2-1 · 11/2016
      Vertretungen
      Representatives
      Représentations
      Rappresentantes
      Representaciones
      Przedstawicielstwa
      Zastoupení
      Mümessiller
      代表處
       info@fibro.de · www.fibro.com
       Geschäftsbereich Normalien
       Business Area Standard Parts
       Département Eléments normalisés
       Settore commerciale Normalizzati
       Sector Empresarial Elementos Normalizados
       Cz??ci znormalizowane
       Obchodní oddělení normovaných díl?
       ?? Alan? Standart Kal?p Elemanlar?
       標準件事業部
       Postfach 1120 · 74851 Hassmersheim
       August-Läpple-Weg · 74855 Hassmersheim
       T +49 6266 73-0*· F +49 6266 73-237
      8
      CZ Gore, s.r.o.
       Košínova 3090/29a · 61200 Brno - Kralovo Pole
       T +42 541 219 607 · F +42 541 219 606
       obchod@gore.cz · www.gore.cz
      DK EBI A/S
       Naverland 29 St. Th · 2600 Glostrup
       T +45 4497 8111 · F +45 4468 0626
       ebi@ebi.dk · www.ebi.dk
      DZ Pneumacoupe Blida Boufarik
       86 Bld. Menad Mohamed
       Boufarik, 09400 Blida
       T +213 347 5655 · F +213 347 5655
       pneumacoupe@yahoo.fr
      EE CLE Baltic Oû
       Sära street 10 · Peetri village
       Rae county · 75312 Estonia
       T +372 780 3530 · F +372 668 8679
       roland.rebane@clegroup.com ·
       www.clebaltic.com
      EG Smeco
       68, Abdel Rahman El Raffei St.
       11351-Heliopolis West, Cairo
       T +20 2 620 06 71 · F +20 2 620 06 74
       r.metwally@tedata.net.eg
      ES Daunert Máquinas-Herramientas, S. A.
       c/. Tirso de Molina s/n Esquina
       c/. Albert Einstein
       Polígono Industrial Almeda
       08940 Cornellá de Llobregat · Barcelona
       T +34 93 475 1480 · F +34 93 377 6464
       info@daunert.com · www.daunert.com
      FI CLE
       Trollbergintie 10 · 10650 Tammisaari
       T +358 2075 19-600 · F +358 2075 19-619
       info@cle.fi · www.cle.fi
      FR FIBRO France Sarl
       26, avenue de l’Europe · 67300 Schiltigheim
       T +33 3 90 20 40 40 · F +33 3 88 81 08 29
       info@fibro.fr · www.fibro.com
      GB Bruderer UK Ltd.
       Unit H, Cradock Road
       Luton · Bedfordshire LU4 0JF
       T +44 1582 563 400 · F +44 1582 493 993
       mail@bruderer.co.uk · www.bruderer-presses.com
      GR Konstantinos Koutseris & Co. - MEK
       Pyloy 100 · 10441 Athen
       T +30 210 5220557 · F +30 210 5221208
       info@mek.com.gr · www.mek.com.gr
      HK FIBRO (Shanghai) Precision Products Co., Ltd.
       1 st Floor, Building 3, No. 253, Ai Du Road
       Pilot Free Trade Zone, Shanghai 200131
       T +86 21 6083 1596 · F +86 21 6083 1599
       info@fibro.cn · www.fibro.com
      HR WML Robert Bednjanec
       Vlaska 76 · 10000 Zagreb
       T +385 984 16005
       robert.bednjanec@net.hr
      HU Rath & Co. Ges. m.b.H.
       Teiritzstraße 3 · AT-2100 Korneuburg
       T +43 2 262 608 0 · F +43 2 262 608 60
       office@rath-co.at · www.rath-co.at
      ID FIBRO Asia Pte. Ltd.
       9, Changi South Street 3, #07-04
       Singapore 486361
       T +65 65 43 99 63 · F +65 65 43 99 62
       info@fibro-asia.com · www.fibro.com
      IE Bruderer UK Ltd.
       Unit H, Cradock Road
       Luton · Bedfordshire LU4 0JF
       T +44 1582 563 400 · F +44 1582 493 993
       mail@bruderer.co.uk · www.bruderer-presses.com
      IL A. J. Englander 1980 Ltd.
       13 Harechev Street · Tel Aviv 67771
       T +972 3 537 36 36 · F +972 3 537 33 25
       info@englander.co.il · www.englander.co.il
      IN FIBRO INDIA PRECISION PRODUCTS PVT. LTD.
       Plot No: A-55, Phase II, Chakan MIDC
       Taluka Khed, Pune - 410 501
       T +91-2135 67 09 03 · M +91-98810 00273
       info@fibro-india.com · www.fibro.com
      IR Eximrad Co.
       268 Dr. Mofatah Ave. · Tehran 15848
       T +98 21 8882 12 3 · F +98 21 8830 9778
       eximrad@yahoo.com
      IT Millutensil S.R.L.
       Corso Buenos Aires, 92 · 20124 Milano
       T +39 02 2940 4390 · F +39 02 204 6677
       info@millutensil.com · www.millutensil.com
      KR FIBRO Korea Co. Ltd.
       203-603, Bucheon Technopark
       Ssangyong 3 · 397,
       Seokcheon-ro, Ojeong-gu, Bucheon-si, Gyeonggi-do
       T +82 32 624 0630 · F +82 32 624 0631
       fibro_korea@fibro.kr · www.fibro.com
      LI Außendienst David Lindauer
       Sportplatzweg 10 · 6440 Brunnen
       M +41 76 4173 239
       d.lindauer@fibro.de · www.fibro.com
      LT Cle Baltic Oû
       Pramones gatve 94-7 · 11115 Vilnius, Lithuania
       T +370 663 56309 · F +370 520 40914
       info@clebaltic.com · www.clebaltic.com
      LV Cle Baltic Oû
       Starta iela 6b · 1026 Riga, Latvia
       T +371 671 39991· F +371 671 39992
       info@clebaltic.com · www.clebaltic.com
      MA Chiba Industrie
       Lot 59 Zone Industrielle · Mohammedia
       T +212 523 31 40 16/17/19
       F +212 523 30 39 85
       h.hind@chibaindustrie.com
      MX FIBRO Inc.
       139 Harrison Ave. · Rockford, IL 61104
       P. O. B. 5924 · Rockford, IL 61125
       T +1 815 229 1300 · F +1 815 229 1303
       info@fibroinc.com · www.fibro.com
      MY FIBRO Asia Pte. Ltd.
       9, Changi South Street 3, #07-04
       Singapore 486361
       T +65 65 43 99 63 · F +65 65 43 99 62
       info@fibro-asia.com · www.fibro.com
      NL Jeveka B.V.
       Platinaweg 4 · 1362 JL Almere Poort
       T +31 36 303 2000
       info@jeveka.com · www.jeveka.com
      NZ APS Tooling Ltd.
       17A Spring Street · Onehunga, Auckland, 1061
       T +64 9 579 2208 · F +64 9 579 2207
       info@apstools.co.nz
      PE Ing. E. Brammertz S.c.r.l.
       Av. José Pardo 182 · OF. 905
       Apartado 0173 · Miraflores, Lima 18
       T +51 1 445 81 78 · F +51 1 445 19 31
       braming@terra.com.pe
      PL Przedstawiciel Piotr Kaszuba
       ul. Lwa To?stoja 14/5 · 56-400 Ole?nica
       T +48 71 398 53 08 · F +48 71 398 53 08
       M +48 609 987 285
       p.kaszuba@fibro.de · www.fibro.com
       Przedstawiciel Marcin Pi?tka
       Roczyny, ul. Bielska 8 · 34-120 Andrychow
       T +48 33 813 72 13 · M +48 605 987 284
       m.pietka@fibro.de · www.fibro.com
       Doradztwo Techniczne Micha? Gadomski
       Suchatowka 8 · 88-140 Gniewkowo
       M +48 609 987 247
       m.gadomski@fibro.de · www.fibro.com
      PT Ferrometal Lda.
       Estrada Manuel Correia Lopes
       Parque Industrial Progresso, Armazém 1 · Polima
       2785-001 S. Domingos de Rana
       T +351 214 447 160 · F +351 214 447 169
       ferrometal@ferrometal.pt
      RO Reprezentant Vânzari Daniel Andrei Sibisan
       Str. Zizinului nr. 8, ap. 21 · Brasov, 500414
       T +40 744 44 05 83 · F +40 368 78 00 08
       d.sibisan@fibro.de · www.fibro.com
      RS Andrija Tesic, Dipl. Ing.
       Partisanska 12/a-II · 11090 Beograd
       T +381 11 2338 362 · F +381 11 2338 362
       atesic@verat.net
      RU CL Engineering & Co. Ltd.
       ul. Sofyiskaya 66 · 192289 S. Petersburg
       T +7 812 575 1592 · F +7 812 324 7388
       info@cleru.ru · www.cleru.ru
       OOO VTF Instrumsnab
       ul. Topolinaya 9A · 445047 Togliatti
       T +7 8482681424 · F +7 8482681452
       office@instrumsnab.ru · www.instrumsnab.ru
      SA Al Rasha Est
       Old Makkah Road - Kilo 3 · Dar Al Oloum Street
       P. O. Box 130029 · Jeddah 21372
       T +966 12 645 85 41 · F +966 12 645 85 39
       fibro.sa@gmail.com · www.al-rasha.com
      SE Lideco AB
       Verkstadsvägen 4 · 51463 Dalstorp
       T +46 321 53 03 50 · F +46 321 603 77
       info@lideco.se · www.lideco.se
      SG FIBRO Asia Pte. Ltd.
       9, Changi South Street 3, #07-04
       Singapore 486361
       T +65 65 43 99 63 · F +65 65 43 99 62
       info@fibro-asia.com · www.fibro.com
      SI Oro-Tech trgovina d.o.o.
       Ulica borcev 1/b · SI-2000 Maribor
       T +386 2 426 08 43 · F +386 2 426 08 44
       oro-tech.trgovina@siol.net
      SK Technicky konzultant Vladimir Tanecká
       CSA 89/8 · 96223 Ocova
       M +421 905 32 94 56
       v.tanecka@fibro.de · www.fibro.com
      TH FIBRO Asia Pte. Ltd.
       9, Changi South Street 3, #07-04
       Singapore 486361
       T +65 65 43 99 63 · F +65 65 43 99 62
       info@fibro-asia.com · www.fibro.com
      TR Ender Kesici ve Teknik Takimlar Sanayi Ticaret A.S.
       Tersane Caddesi No. 105
       34420 Karaköy/Istanbul
       T +90 212 253 2600 · F +90 212 254 5791
       info@enderltd.com · www.enderltd.com
      TW SunNan Enterprises Co. Ltd.
       2F, No. 7, Alley 6, Lane 235 · Pao-Chiao Road
       Hsin-Tien City · Taipei
       T +886 22917 6454 · F +886 22911 0398
       sun-ss@umail.hinet.net
      US FIBRO Inc.
       139 Harrison Ave. · Rockford, IL 61104
       P. O. B. 5924 · Rockford, IL 61125
       T +1 815 229 1300 · F +1 815 229 1303
       info@fibroinc.com · www.fibro.com
      ZA Herrmann & Herrmann Pty. Ltd.
       24, Shaft Road · P. O. B. 13030
       Knights 1413
       T +27 11 828 01 00 · F +27 11 828 60 21
       hermstools@mweb.co.za · www.hermstools.com
      VVB2-2 · 11/2016
      DE
       Außendienst Andreas Otto
       Immenweg 3 · 16356 Ahrensfelde OT Eiche
       T +49 30 423 97 15 · M +49 170 739 00 64
       a.otto@fibro.de
      PLZ 10000-19000
       Walter Ruff GmbH
       Heerenholz 9 · 28307 Bremen
       T +49 421 43878 0 · F +49 421 43878 22
       mail@praeziruff.de · www.praeziruff.de
      PLZ 20000-28000, 49000
       Außendienst Jörg Dyck
       Walter Ruff GmbH
       Postfach 450118 · 28295 Bremen
       T +49 421 43878 0 · F +49 421 43878 22
       M +49 173 9252243 · mail@praeziruff.de
      PLZ 29000-31000, 37000-39000
       Außendienst Dirk Bechinka
       Neuer Kamp 74 · 32584 Löhne
       M +49 170 5760009 · d.bechinka@fibro.de
      PLZ 32000-34000, 48000, 49000
       Außendienst Ralf Feldmann
       Wiesenstraße 23b · 58339 Breckerfeld
       M +49 151 12590159 · r.feldmann@fibro.de
      PLZ 35000-36000, 57000, 60000, 61000, 65000
       Außendienst Lars Jahncke
       Locher Straße 44 · 42719 Solingen
       T +49 212 2543462 · F +49 212 2543390
       M +49 170 7637125 · l.jahncke@fibro.de
      PLZ 42000, 44000-46000, 58000-59000
       Außendienst Hartwig Hennemann
       Staubenthaler Höhe 79 · 42369 Wuppertal
       T +49 202 283 17 56 · F +49 202 759 55 80
       M +49 175 29 659 30
       h.hennemann@fibro.de
      PLZ 40000-41000, 42000, 47000, 50000-53000,
       Außendienst Oliver Koop
       Burgstraße 14 · 66780 Rehlingen-Siersburg
       T +49 6835 923 28 10 · F +49 6835 608 59 09
       M +49 175 438 53 81 · o.koop@fibro.de
      PLZ 54000-55000, 56000, 66000
       Außendienst Matthias Ehrenfried
       Steigerwaldstraße 25 · 74172 Neckarsulm
       T +49 7132 34 56 90 · F +49 7132 98 94 82
       M +49 171 864 95 52
       m.ehrenfried@fibro.de
      PLZ 71000, 74000, 75000, 97000
       Außendienst Manfred Wagner
       Breslauer Straße 57 · 74372 Sersheim
       T +49 7042 350 86 · F +49 7042 37 48 20
       M +49 170 563 52 30
       m.wagner@fibro.de
      PLZ 70000, 71000, 72000, 73000, 88000, 89000
       Außendienst Markus Rössl
       Johann-Strauß-Straße 16/1
       74906 Bad Rappenau
       T +49 7264 20 64 17 · F +49 7264 20 64 18
       M +49 160 97 25 23 93
       m.roessl@fibro.de
      PLZ 63000, 64000, 67000, 68000, 69000,
       76000, 77000
       Außendienst Matthias Jörg
       In der Krautbündt 44
       77656 Offenburg-Zunsweile
       M +49 151 21 28 25 00 · m.joerg@fibro.de
      PLZ 72000, 77000, 78000-79000, 88000
       Jugard + Künstner GmbH
       Landsberger Straße 289 · 80687 München
       T +49 89 546 15 60 · F +49 89 580 27 96
       muc@jugard-kuenstner.de
       www.jugard-kuenstner.de
      PLZ 80000-87000, 88000, 89000
       Jugard + Künstner GmbH
       Weidentalstraße 4 · 90518 Altdorf bei Nürnberg
       T +49 9187 936 69-0 · F +49 9187 936 69-90
       nbg@jugard-kuenstner.de
       www.jugard-kuenstner.de
      PLZ 90000-96000, 97000
       HELD Werkzeugmaschinen
       Präzisionswerkzeuge GmbH
       Sorge 34 · 07545 Gera
       T +49 365 824 91 0 · F +49 365 824 91 11
       info@held-wzm.de · www.held-wzm.de
      PLZ 01000-09000, 98000-99000
      AT Rath & Co. Ges. m.b.H.
       Teiritzstrasse 3 · 2100 Korneuburg
       T +43 2262 608 0 · F +43 2262 608 60
       office@rath-co.at · www.rath-co.at
      AU Bruderer Presses Australia Pty. Ltd.
       92 Trafalgar Street · Annandale, NSW 2038
       T +61 419 400 995 · F +61 296 864 809
       Brudsyd@tpgi.com.au
      BA Oro-Tech trgovina d.o.o.
       Ulica borcev 1/b · SI-2000 Maribor
       T +386 2 426 08 43 · F +386 2 426 08 44
       oro-tech.trgovina@siol.net
      BE Schiltz s.a.
       Rue Nestor Martin 315 · 1082 Bruxelles
       T +32 2 464 4830 · F +32 2 464 4839
       info@schiltz.be · www.schiltz-norms.be
      BG Bavaria 2002 EOOD
       Patriarh Evtimii 10
       5100 Gorna Orjachoviza
       T +359 618 64158 · F +359 618 64960
       bavaria2002@gorna.net
       www.bavaria2002.hit.bg
      BR Industécnica Equipamentos
       Industriais Ltda.
       Rua Jose Geraldo Alves Cursino, 414
       04773-120 São Paulo
       T +55 11 5548 4333 · F +55 11 5522 4400
       industecnica@fixo.com.br
       www.industecnica.com.br
      CA FIBRO Inc.
       139 Harrison Ave. · Rockford, IL 61104
       P. O. B. 5924 · Rockford, IL 61125
       T +1 815 229 1300 · F +1 815 229 1303
       info@fibroinc.com · www.fibro.com
      CH Außendienst David Lindauer
       Mühlegasse 18 · 6422 Steinen
       M +41 76 417 32 39
       d.lindauer@fibro.de · www.fibro.com
      CL Bermat S.A.
       Coyancura 2283, Of. 601
       Casilla 9781 · Santiago
       T +56 2 231 88 77 · F +56 2 231 42 94
       bermat@bermat.cl · www.bermat.cl
      CN FIBRO (Shanghai) Precision Products Co., Ltd.
       1 st Floor, Building 3, No. 253, Ai Du Road
       Pilot Free Trade Zone, Shanghai 200131
       T +86 21 6083 1596 · F +86 21 6083 1599
       info@fibro.cn · www.fibro.com
       Jilin Province Feibo Tooling Standard Parts Co., Ltd.
       Add: Room303, No. 5470, Xi’an Avenue,
       Luyuan District, Changchun City, Jilin Province
       T +86 431 8120 3792 · F +86 431 8120 3792
       feibomuju@sina.cn · www.fibro.com
       Shenzhen Poleda Investment Co.,Ltd.
       Add: 4/F, SED Technology Tower,
       No.1 Keji Road, Hi-tech Industrial Park,
       Nanshan District, Shenzhen
       T +86 755 2398 5026/2398 5029
       F +86 755 2398 5596
       anson@poleda.cn · www.fibro.com
      CY Militos Trading Ltd.
       P.O.B. 27297 · 1643 Nicosia
       T +357 22 75 12 56 · F +357 22 75 22 11
       militos@cytanet.com.cy
      VVB2-1 · 11/2016
      Vertretungen
      Representatives
      Représentations
      Rappresentantes
      Representaciones
      Przedstawicielstwa
      Zastoupení
      Mümessiller
      代表處
       info@fibro.de · www.fibro.com
       Geschäftsbereich Normalien
       Business Area Standard Parts
       Département Eléments normalisés
       Settore commerciale Normalizzati
       Sector Empresarial Elementos Normalizados
       Cz??ci znormalizowane
       Obchodní oddělení normovaných díl?
       ?? Alan? Standart Kal?p Elemanlar?
       標準件事業部
       Postfach 1120 · 74851 Hassmersheim
       August-Läpple-Weg · 74855 Hassmersheim
       T +49 6266 73-0*· F +49 6266 73-237
      CZ Gore, s.r.o.
       Košínova 3090/29a · 61200 Brno - Kralovo Pole
       T +42 541 219 607 · F +42 541 219 606
       obchod@gore.cz · www.gore.cz
      DK EBI A/S
       Naverland 29 St. Th · 2600 Glostrup
       T +45 4497 8111 · F +45 4468 0626
       ebi@ebi.dk · www.ebi.dk
      DZ Pneumacoupe Blida Boufarik
       86 Bld. Menad Mohamed
       Boufarik, 09400 Blida
       T +213 347 5655 · F +213 347 5655
       pneumacoupe@yahoo.fr
      EE CLE Baltic Oû
       Sära street 10 · Peetri village
       Rae county · 75312 Estonia
       T +372 780 3530 · F +372 668 8679
       roland.rebane@clegroup.com ·
       www.clebaltic.com
      EG Smeco
       68, Abdel Rahman El Raffei St.
       11351-Heliopolis West, Cairo
       T +20 2 620 06 71 · F +20 2 620 06 74
       r.metwally@tedata.net.eg
      ES Daunert Máquinas-Herramientas, S. A.
       c/. Tirso de Molina s/n Esquina
       c/. Albert Einstein
       Polígono Industrial Almeda
       08940 Cornellá de Llobregat · Barcelona
       T +34 93 475 1480 · F +34 93 377 6464
       info@daunert.com · www.daunert.com
      FI CLE
       Trollbergintie 10 · 10650 Tammisaari
       T +358 2075 19-600 · F +358 2075 19-619
       info@cle.fi · www.cle.fi
      FR FIBRO France Sarl
       26, avenue de l’Europe · 67300 Schiltigheim
       T +33 3 90 20 40 40 · F +33 3 88 81 08 29
       info@fibro.fr · www.fibro.com
      GB Bruderer UK Ltd.
       Unit H, Cradock Road
       Luton · Bedfordshire LU4 0JF
       T +44 1582 563 400 · F +44 1582 493 993
       mail@bruderer.co.uk · www.bruderer-presses.com
      GR Konstantinos Koutseris & Co. - MEK
       Pyloy 100 · 10441 Athen
       T +30 210 5220557 · F +30 210 5221208
       info@mek.com.gr · www.mek.com.gr
      HK FIBRO (Shanghai) Precision Products Co., Ltd.
       1 st Floor, Building 3, No. 253, Ai Du Road
       Pilot Free Trade Zone, Shanghai 200131
       T +86 21 6083 1596 · F +86 21 6083 1599
       info@fibro.cn · www.fibro.com
      HR WML Robert Bednjanec
       Vlaska 76 · 10000 Zagreb
       T +385 984 16005
       robert.bednjanec@net.hr
      HU Rath & Co. Ges. m.b.H.
       Teiritzstraße 3 · AT-2100 Korneuburg
       T +43 2 262 608 0 · F +43 2 262 608 60
       office@rath-co.at · www.rath-co.at
      ID FIBRO Asia Pte. Ltd.
       9, Changi South Street 3, #07-04
       Singapore 486361
       T +65 65 43 99 63 · F +65 65 43 99 62
       info@fibro-asia.com · www.fibro.com
      IE Bruderer UK Ltd.
       Unit H, Cradock Road
       Luton · Bedfordshire LU4 0JF
       T +44 1582 563 400 · F +44 1582 493 993
       mail@bruderer.co.uk · www.bruderer-presses.com
      IL A. J. Englander 1980 Ltd.
       13 Harechev Street · Tel Aviv 67771
       T +972 3 537 36 36 · F +972 3 537 33 25
       info@englander.co.il · www.englander.co.il
      IN FIBRO INDIA PRECISION PRODUCTS PVT. LTD.
       Plot No: A-55, Phase II, Chakan MIDC
       Taluka Khed, Pune - 410 501
       T +91-2135 67 09 03 · M +91-98810 00273
       info@fibro-india.com · www.fibro.com
      IR Eximrad Co.
       268 Dr. Mofatah Ave. · Tehran 15848
       T +98 21 8882 12 3 · F +98 21 8830 9778
       eximrad@yahoo.com
      IT Millutensil S.R.L.
       Corso Buenos Aires, 92 · 20124 Milano
       T +39 02 2940 4390 · F +39 02 204 6677
       info@millutensil.com · www.millutensil.com
      KR FIBRO Korea Co. Ltd.
       203-603, Bucheon Technopark
       Ssangyong 3 · 397,
       Seokcheon-ro, Ojeong-gu, Bucheon-si, Gyeonggi-do
       T +82 32 624 0630 · F +82 32 624 0631
       fibro_korea@fibro.kr · www.fibro.com
      LI Außendienst David Lindauer
       Sportplatzweg 10 · 6440 Brunnen
       M +41 76 4173 239
       d.lindauer@fibro.de · www.fibro.com
      LT Cle Baltic Oû
       Pramones gatve 94-7 · 11115 Vilnius, Lithuania
       T +370 663 56309 · F +370 520 40914
       info@clebaltic.com · www.clebaltic.com
      LV Cle Baltic Oû
       Starta iela 6b · 1026 Riga, Latvia
       T +371 671 39991· F +371 671 39992
       info@clebaltic.com · www.clebaltic.com
      MA Chiba Industrie
       Lot 59 Zone Industrielle · Mohammedia
       T +212 523 31 40 16/17/19
       F +212 523 30 39 85
       h.hind@chibaindustrie.com
      MX FIBRO Inc.
       139 Harrison Ave. · Rockford, IL 61104
       P. O. B. 5924 · Rockford, IL 61125
       T +1 815 229 1300 · F +1 815 229 1303
       info@fibroinc.com · www.fibro.com
      MY FIBRO Asia Pte. Ltd.
       9, Changi South Street 3, #07-04
       Singapore 486361
       T +65 65 43 99 63 · F +65 65 43 99 62
       info@fibro-asia.com · www.fibro.com
      NL Jeveka B.V.
       Platinaweg 4 · 1362 JL Almere Poort
       T +31 36 303 2000
       info@jeveka.com · www.jeveka.com
      NZ APS Tooling Ltd.
       17A Spring Street · Onehunga, Auckland, 1061
       T +64 9 579 2208 · F +64 9 579 2207
       info@apstools.co.nz
      PE Ing. E. Brammertz S.c.r.l.
       Av. José Pardo 182 · OF. 905
       Apartado 0173 · Miraflores, Lima 18
       T +51 1 445 81 78 · F +51 1 445 19 31
       braming@terra.com.pe
      PL Przedstawiciel Piotr Kaszuba
       ul. Lwa To?stoja 14/5 · 56-400 Ole?nica
       T +48 71 398 53 08 · F +48 71 398 53 08
       M +48 609 987 285
       p.kaszuba@fibro.de · www.fibro.com
       Przedstawiciel Marcin Pi?tka
       Roczyny, ul. Bielska 8 · 34-120 Andrychow
       T +48 33 813 72 13 · M +48 605 987 284
       m.pietka@fibro.de · www.fibro.com
       Doradztwo Techniczne Micha? Gadomski
       Suchatowka 8 · 88-140 Gniewkowo
       M +48 609 987 247
       m.gadomski@fibro.de · www.fibro.com
      PT Ferrometal Lda.
       Estrada Manuel Correia Lopes
       Parque Industrial Progresso, Armazém 1 · Polima
       2785-001 S. Domingos de Rana
       T +351 214 447 160 · F +351 214 447 169
       ferrometal@ferrometal.pt
      RO Reprezentant Vânzari Daniel Andrei Sibisan
       Str. Zizinului nr. 8, ap. 21 · Brasov, 500414
       T +40 744 44 05 83 · F +40 368 78 00 08
       d.sibisan@fibro.de · www.fibro.com
      RS Andrija Tesic, Dipl. Ing.
       Partisanska 12/a-II · 11090 Beograd
       T +381 11 2338 362 · F +381 11 2338 362
       atesic@verat.net
      RU CL Engineering & Co. Ltd.
       ul. Sofyiskaya 66 · 192289 S. Petersburg
       T +7 812 575 1592 · F +7 812 324 7388
       info@cleru.ru · www.cleru.ru
       OOO VTF Instrumsnab
       ul. Topolinaya 9A · 445047 Togliatti
       T +7 8482681424 · F +7 8482681452
       office@instrumsnab.ru · www.instrumsnab.ru
      SA Al Rasha Est
       Old Makkah Road - Kilo 3 · Dar Al Oloum Street
       P. O. Box 130029 · Jeddah 21372
       T +966 12 645 85 41 · F +966 12 645 85 39
       fibro.sa@gmail.com · www.al-rasha.com
      SE Lideco AB
       Verkstadsvägen 4 · 51463 Dalstorp
       T +46 321 53 03 50 · F +46 321 603 77
       info@lideco.se · www.lideco.se
      SG FIBRO Asia Pte. Ltd.
       9, Changi South Street 3, #07-04
       Singapore 486361
       T +65 65 43 99 63 · F +65 65 43 99 62
       info@fibro-asia.com · www.fibro.com
      SI Oro-Tech trgovina d.o.o.
       Ulica borcev 1/b · SI-2000 Maribor
       T +386 2 426 08 43 · F +386 2 426 08 44
       oro-tech.trgovina@siol.net
      SK Technicky konzultant Vladimir Tanecká
       CSA 89/8 · 96223 Ocova
       M +421 905 32 94 56
       v.tanecka@fibro.de · www.fibro.com
      TH FIBRO Asia Pte. Ltd.
       9, Changi South Street 3, #07-04
       Singapore 486361
       T +65 65 43 99 63 · F +65 65 43 99 62
       info@fibro-asia.com · www.fibro.com
      TR Ender Kesici ve Teknik Takimlar Sanayi Ticaret A.S.
       Tersane Caddesi No. 105
       34420 Karaköy/Istanbul
       T +90 212 253 2600 · F +90 212 254 5791
       info@enderltd.com · www.enderltd.com
      TW SunNan Enterprises Co. Ltd.
       2F, No. 7, Alley 6, Lane 235 · Pao-Chiao Road
       Hsin-Tien City · Taipei
       T +886 22917 6454 · F +886 22911 0398
       sun-ss@umail.hinet.net
      US FIBRO Inc.
       139 Harrison Ave. · Rockford, IL 61104
       P. O. B. 5924 · Rockford, IL 61125
       T +1 815 229 1300 · F +1 815 229 1303
       info@fibroinc.com · www.fibro.com
      ZA Herrmann & Herrmann Pty. Ltd.
       24, Shaft Road · P. O. B. 13030
       Knights 1413
       T +27 11 828 01 00 · F +27 11 828 60 21
       hermstools@mweb.co.za · www.hermstools.com
      VVB2-2 · 11/2016
      9
      Alphabetical content
      subject to alterations
      24°-cone-threaded joint F382, F384
      Accessories for punches E185
      Accessories for Retainers, triangular, for Ball-Lock
      Punches E178
      Accessories for retainers, triangular, for punches
      ISO 8020 E184
      ACCU-LOCK Fixture device for ball-lock punches,
      heavy duty E180
      ACCU-LOCK Fixture device for ball-lock punches,
      light duty E179
      Adjusting washer D256, F83, L11
      Adjusting washer, CNOMO D258, D260
      Air pin, according to VW standard D264
      Air springs to VW standard F355
      Aligning- and tryout press unit A59
      Aluminium plate ~ISO 6753-1 A39, B7
      Anaerobic metal adhesives for securing of screws and
      bearing bushes H10
      Angled guide gib, Bronze with solid lubricant
      D228, D230-
      D235
      Angled guide gib, Bronze with solid lubricant, CNOMO D229
      Anti-rotation elements
      E125, E127,
      E129, E131,
      E133, E137,
      E139, E141,
      E143, E145
      Assembling cone F405
      Assembly Arrangenment of Gas Springs in Servial
      Connection Compression Fitting F381
      Attachment point screwable profilift delta C29
      Attachment point screwable profilift gamma C26
      Attachment point screwable profilift gamma ring nut C27
      Attachment point weldable profilift eta C39
      Ball bearing guide, complete L29
      Ball bearing guides - Loading Diagram D290
      Ball bearing guides - Tables of dynamic load indexes D291
      Ball bearing insert with collar J10
      Ball bearing insert without collar J10
      Ball bearing rail J11
      Ball cage with assembly aid, Aluminium D105
      Ball cage with assembly aid, Brass D104
      Ball cage with circlip and fastening ring groove,
      Aluminium D107
      Ball cage with circlip and fastening ring groove, Brass D106
      Ball cage with circlip groove, Aluminium D103
      Ball cage with circlip groove, Brass D102
      Ball cage, plastic, for highest stroking speed D71
      Ball cage, small dimension D26
      Ball guide unit to Mercedes-Benz Standard D67
      Ball lock pilot pin, with parabolic tip, heavy duty E102
      Ball lock pilot pin, with parabolic tip, light duty E76
      Ball lock pilot pin, with tapered tip, heavy duty E101
      Ball lock pilot pin, with tapered tip, light duty E75
      Ball lock punch, blank, heavy duty E77
      Ball lock punch, blank, light duty E51
      Ball lock punch, blank, with ejector pin, heavy duty E83
      Ball lock punch, blank, with ejector pin, light duty E57
      Ball lock punch, punch larger than shaft, blank, heavy
      duty E89
      Ball lock punch, punch larger than shaft, blank, light duty E63
      Ball lock punch, punch larger than shaft, blank, with
      ejector pin, heavy duty E95
      Ball lock punch, punch larger than shaft, blank, with
      ejector pin, light duty E69
      Ball lock punch, punch larger than shaft, rectangle with
      radiussed corners, heavy duty E94
      Ball lock punch, punch larger than shaft, rectangle with
      radiussed corners, light duty E68
      Ball lock punch, punch larger than shaft, rectangle with
      radiussed corners, with ejector pin, heavy duty E100
      Ball lock punch, punch larger than shaft, rectangle with
      radiussed corners, with ejector pin, light duty E74
      Ball lock punch, punch larger than shaft, rectangular,
      heavy duty E92
      Ball lock punch, punch larger than shaft, rectangular,
      light duty E66
      Ball lock punch, punch larger than shaft, rectangular,
      with ejector pin, heavy duty E98
      Ball lock punch, punch larger than shaft, rectangular,
      with ejector pin, light duty E72
      Ball lock punch, punch larger than shaft, round,
      heavy duty E90
      Ball lock punch, punch larger than shaft, round,
      light duty E64
      Ball lock punch, punch larger than shaft, round, with
      ejector pin, heavy duty E96
      Ball lock punch, punch larger than shaft, round, with
      ejector pin, light duty E70
      Ball lock punch, punch larger than shaft, slot, heavy duty E93
      Ball lock punch, punch larger than shaft, slot, light duty E67
      Ball lock punch, punch larger than shaft, slot, with
      ejector pin, heavy duty E99
      Ball lock punch, punch larger than shaft, slot, with
      ejector pin, light duty E73
      Ball lock punch, punch larger than shaft, square,
      heavy duty E91
      Ball lock punch, punch larger than shaft, square,
      light duty E65
      Ball lock punch, punch larger than shaft, square, with
      ejector pin, heavy duty E97
      Ball lock punch, punch larger than shaft, square, with
      ejector pin, light duty E71
      Ball lock punch, stepped, rectangle with radiussed
      corners, heavy duty E82
      Ball lock punch, stepped, rectangle with radiussed
      corners, light duty E56
      Ball lock punch, stepped, rectangle with radiussed
      corners, with ejector pin, heavy duty E88
      Ball lock punch, stepped, rectangle with radiussed
      corners, with ejector pin, light duty E62
      Ball lock punch, stepped, rectangular, heavy duty E80
      Ball lock punch, stepped, rectangular, light duty E54
      Ball lock punch, stepped, rectangular, with ejector pin,
      heavy duty E86
      Ball lock punch, stepped, rectangular, with ejector pin,
      light duty E60
      Ball lock punch, stepped, round, heavy duty E78
      Ball lock punch, stepped, round, light duty E52
      Ball lock punch, stepped, round, with ejector pin,
      heavy duty E84
      Ball lock punch, stepped, round, with ejector pin,
      light duty E58
      Ball lock punch, stepped, slot, heavy duty E81
      Ball lock punch, stepped, slot, light duty E55
      Ball lock punch, stepped, slot, with ejector pin,
      heavy duty E87
      Ball lock punch, stepped, slot, with ejector pin, light duty E61
      Ball lock punch, stepped, square, heavy duty E79
      Ball lock punch, stepped, square, light duty E53
      Ball lock punch, stepped, square, with ejector pin,
      heavy duty E85
      Ball lock punch, stepped, square, with ejector pin,
      light duty E59
      Blanking and forming with FIBROFLEX®-Elastomers G27-G33
      Bolster insert plate A58
      Bolt guide L42
      Bolt-on die set shank, ~DIN ISO 10242-2 C11
      Bush for die lifting bolt C49
      Cable - straight D285, D289
      Cable, 90° connector D285, D289
      Cage retainer D269-D271
      Cam slide units KBV 1 K6
      Centering unit D255, L10
      10
      Alphabetical content
      subject to alterations
      Centering unit with adjusting washer D254
      Centring pin D261
      Centring pin to Mercedes-Benz standard D262
      Centring sleeve L13
      Centring unit, CNOMO D257, D259
      Centring unit, flat L10
      Circlip DIN 471 D113
      Clamp, forked shape, DIN 6315-B C52
      Clamp, goose neck shape, DIN 6316 C55
      Clamp, goose neck shape, with setscrew C55
      Clamp, straight, DIN 6314 C54
      Clamp, straight, with setscrew C54
      Clamping claw, goose-neck shape C52
      Clamping claw, infinitely variable C53
      Clamping flange with retaining ring, ~AFNOR D53
      Clamping tool set C68-C69
      Cleaner H11
      Compact gas spring F273-F291
      Compact Nitrogen Booster F400-F401
      Comparative graphs E15
      Composite plates F357
      Compression Fitting – Compound Threaded Joints F379-F380
      Compression Pad F108
      Concertina shroud for gas springs F366-F367
      Concertina shroud with spacer bush D265
      Concertina shroud with spacer tube D267
      Connecting hose with 24° cone F383
      Connector system 24° conus micro F385-F389
      Connector system micro F388
      Control fitting
      F391-F392,
      F394
      Control fitting for gas springs F391
      Controllable gas springs F354
      Conveyor belt, electrically controlled J22-J25
      Counter view, mechanical J16
      Coupling spigot A42
      Coupling spigot with flange C12
      Coupling spigot with thread C12
      Cyanoacrylate adhesive H12
      Cylinder pressure regulator F399
      Damper for lifting units to Mercedes-Benz F150
      Damper stopper F96
      Damper, heavy-duty F94
      Damper, light-duty F92-F93
      Damping unit SD F97
      Date stamp complete (short version), embossed letteringL59
      Date stamp complete, embossed lettering L58
      Deflection of pillars and bending equation D25
      Delimiting guide for conveyor belt J26
      Delimiting guide with loss prevention for conveyor belt J27
      Demountable guide pillar with centre fixing D72, D74
      Demountable guide pillar with centre fixing and ring nut D76
      Demountable guide pillar with conical centre fixing D77
      Demountable guide pillar, conical, with ball cage
      retainer, DIN 9825/ISO 9182-4/AFNOR D42
      Diaphragm pressure switch F395
      Die lifting bolt with safety ring and spring,
      CNOMO Standard C48
      Die lifting bolt with safety ring and spring,
      to VW standard C47
      Die lifting bolt with safety ring, for lifting flange 2133.12. C50
      Die lifting bolt with safety ring, VDI 3366 C46
      Die set
      A17-A18,
      A20-A21
      Die set ~DIN 9816 Shape D A13
      Die set ~DIN 9868/ISO 11415 A24-A31
      Die set DIN 9812 Shape C/CG A14
      Die set DIN 9812 Type D/DG A10
      Die set DIN 9814 Shape C/CG A15
      Die set DIN 9814 Type D/DG A11
      Die set DIN 9816 Shape D A12
      Die set DIN 9819 Shape C/CG A16
      Die set DIN 9822 Shape C A19
      Die set ECO-LINE A36-A37
      Die set press unit A40-A41
      Die set press units - Accessories A42
      Die set shank with collar C11
      Die set shank, straight C10
      Die set to customers’ specifications, Aluminium A32-A35
      Die set to customers’ specifications, Steel A32-A35
      Disc spring DIN 2093 F62
      Double vortex ring screw C35
      Double vortex ring screw Mega DSS C37
      Double vortex ring screw with centring C36
      Double vortice hook C31
      Double vortice ring C32
      Double vortice ring with central device C33
      Double vortice ring with internal thread C34, C38
      Dowel pin according to DIN EN ISO 8734 E203
      Dowel pin similar to DIN EN ISO 8734 E202
      Dowel pin with internal extracting thread, according to
      DIN EN ISO 8735 E197
      Dowel pin with internal extracting thread, similar to
      DIN EN ISO 8735 E196
      Drill bush with collar, DIN 172, Shape A E204
      Drill bush without collar, DIN 179, Shape A E205
      Dynamic stripping element (DAE) E166
      Dynamometer for gas springs F402-F403
      Ejector pin, hardened, DIN ISO 6751 L44-L45
      Ejector pin, hardened, round stepped, DIN ISO 8694 L48
      Ejector pin, hardened, similar to DIN 1530 Shape D L50-L51
      Ejector pin, nitrided, DIN ISO 6751 L46-L47
      Ejector pin, nitrided, round stepped, DIN ISO 8694 L49
      Ejector pin, nitrided, similar to DIN 1530 Shape D L52
      Ejector rod L12
      Ejector sleeve, hardened, DIN ISO 8405 L56
      Ejector sleeve, nitrided, DIN ISO 8405 L57
      Elastomer Stripper E190
      Electro-mechanical transporter -
      horizontal centre gear position, two slides, with profile
      and support J38
      Electro-mechanical transporter -
      horizontal gear position J35
      Electro-mechanical transporter -
      horizontal gear position, two slides, with profile and
      support J37
      Electro-mechanical transporter -
      horizontal gear position, with profile and support J36
      Electro-mechanical transporter -
      vertical centre gear position, two slides, with profile and
      support J38
      Electro-mechanical transporter -
      vertical gear position J35
      Electro-mechanical transporter -
      vertical gear position, two slides, with profile and
      support J37
      Electro-mechanical transporter -
      vertical gear position, with profile and support J36
      Electro-mechanical transporters -
      Angled mounting with adapter plate J41
      Electro-mechanical transporters -
      Distance J40
      Electro-mechanical transporters -
      Fastening element J39
      Electro-mechanical transporters -
      Fastening element with height adjustment system J39
      Electro-mechanical transporters -
      Quick clamp for guiding system J40
      Electronic thread moulding J7-J9
      FIBRO Compact Cam (FCC) Tool slides K7
      11
      Alphabetical content
      subject to alterations
      FIBROELAST® Tubular spring element 70 Shore A F72
      FIBROELAST®-Hollow round rod G20
      FIBROELAST®-Plate G18
      FIBROELAST®-Round rod G19
      FIBROFIX®-SECHS - Application examples H18-H19
      FIBROFIX®-SECHS - Application with the injection gun H17
      FIBROFLEX® - Blanking, forming and embossing tools -
      Application examples G23-G25
      FIBROFLEX® - Technical data G8-G9
      FIBROFLEX®-Elastomer spring for FIBROFLEX®-Spring
      system F64
      FIBROFLEX®-Hollow round rod G15
      FIBROFLEX®-Hollow Square rod G13
      FIBROFLEX®-Hollow triangular rod (60°) G17
      FIBROFLEX®-Plate G10
      FIBROFLEX®-Round rod G14
      FIBROFLEX®-Square rod G11
      FIBROFLEX®-Triangular rod (60°) G16
      FIBROFLEX®-Tubular spring element F87
      FIBROFLEX®-Tubular spring element 80 Shore A, to
      DIN ISO 10069-1 F66
      FIBROFLEX®-Tubular spring element 90 Shore A, to
      DIN ISO 10069-1 F68
      FIBROFLEX®-Tubular spring element 95 Shore A, to
      DIN ISO 10069-1 F70
      FIBROFLEX®-U-Profil rod G12
      FIBROLIT®-MK - Technical data H8
      FIBROLIT®-ZWO - Application examples H18-H19
      FIBROZIPP E198
      Filling and control fitting F399
      Filling hose F399
      Fine blanking die set A22
      Flanged guide bush "ECO-LINE", Bronze with solid
      lubricant rings, ISO 9448-4 D140-D142
      Flanged guide bush "ECO-LINE", bronzeplated,
      ISO 9448- 4 D137-D139
      Flanged guide bush for ball bearing, ISO 9448-5 D143-D145
      Flanged guide bush with ball cage retainer D110-D111
      Flanged guide bush, sintered ferrite carbonitrided with
      long-term lubrication, ISO 9448-4 D134-D136
      Flat ejector pin, hardened, similar to DIN ISO 8693 L54
      Flat ejector pin, nitrided, similar to DIN ISO 8693 L55
      Flat guide bar with two sliding surfaces, Bronze with
      solid lubricant D174
      Flat guide bar, Bronze with solid lubricant
      D171-D173,
      D175-D176
      Flat mushroom head screw with hexagon socket C65
      Flex cam K3
      Fluid Metal H12
      Foil shim B20
      Forming / Demoulding L41
      Gas spring (Spring plunger) MOULD LINE, with hexagon
      socket L72-L73
      Gas spring (Spring plunger), to WDX F179
      Gas spring (Spring plunger), with hexagon socket,
      VDI 3004 F176-F178
      Gas spring connection systems F368
      Gas spring CX, Compact Xtreme F266-F271
      Gas spring DS
      F315, F317-
      F323
      Gas spring HEAVy DUTy F213-F229
      Gas spring MOULD LINE L63, L74-L81
      Gas spring MOULD LINE - Description L64-L66
      Gas spring MOULD LINE - Installation instructions L67-L68
      Gas spring POWERLINE F239-F263
      Gas spring SPEED CONTROL, cushioned F303-F313
      Gas spring with external thread F328-F332
      Gas spring with hexagonal flange F336
      Gas spring with male fixing thread, POWERLINE F334-F335
      Gas spring with male fixing thread, small mounting
      height F333
      Gas spring with thread F327
      Gas spring with through bore passage F231-F237
      Gas spring, small dimension and low force F181-F193
      Gas spring, Standard F195-F211
      Gas spring, with low build height
      F293, F295-
      F301
      Gas springs - Accessories F359
      Gas springs - Application examples F409-F416
      Gas springs - Description F164-F167
      Gas springs - General overview F23
      Gas springs - Mounting Directions F168-F169
      Gas springs - Synopsis F172-F174
      Gas springs (Spring plungers) F175
      Gas springs for working temperatures up to 120 ° C F337
      Gas springs from FIBRO - The Safer Choice
      F170-F171,
      L70-L71
      Gas springs with fastening to Ford standard WDX F325
      Gauge pin DIN 2269 E206
      Gauge pin holder E208
      Gauge pin with handle E209
      Gauge pins - boxed set E209
      Guide D279
      Guide bar with four sliding surfaces, Bronze with solid
      lubricant D219
      Guide bar with one sliding surfaces, Bronze with solid
      lubricant D220
      Guide bar with three sliding surfaces, Bronze with solid
      lubricant D217, D221
      Guide bar with two sliding surfaces, Bronze with solid
      lubricant D218
      Guide bar with two sliding surfaces, Bronze with solid
      lubricant, CNOMO D216
      Guide bar with two sliding surfaces, Bronze with solid
      lubricant, VDI 3357 D215
      Guide bearing for ball bearing guide D87
      Guide bearing low build height, for ball bearing guide D93
      Guide bearing with headed guide bush with solid lubri-
      cant D94
      Guide bearing with screw holes, for ball bearing guide D90
      Guide bearing with screw holes, sintered guide D89
      Guide bearing with solid lubricant D84
      Guide bearing, low build height, sintered guide D92
      Guide bearing, sintered guide D86
      Guide bracket, Bronze with solid lubricant, VDI 3387 D223
      Guide bracket, Steel with solid lubricant, VDI 3387 D222
      Guide bush "ECO-LINE", Bronze with solid lubrication
      rings, ISO 9448-2 D98
      Guide bush "ECO-LINE", bronzeplated, ISO 9448-2 D97
      Guide bush for ball bearing, AFNOR D100
      Guide bush for ball bearing, for highest stroking speed D70
      Guide bush for ball bearing, ISO 9448-3 D70, D99
      Guide bush for ball bearing, small dimension D26
      Guide bush for ball bearing, with stroke limitation D101
      Guide bush for punch DIN 9845, Shape C E152
      Guide bush for punch ISO 8978 E153
      Guide bush for spring ram 2478.20. .1 F162
      Guide bush with collar, bronze coated, ~AFNOR D155
      Guide bush with collar, Bronze with solid lubricant
      D162-D165,
      L30-L33
      Guide bush with collar, Bronze with solid lubricant,
      CNOMO D169
      Guide bush with collar, Bronze with solid lubricant,
      DIN 9834/ISO 9448 D166
      Guide bush with collar, Bronze with solid lubricant,
      NAAMS D167-D168
      Guide bush with collar, Bronze, CNOMO D170
      Guide bush with collar, for ball bearing, ~AFNOR D154
      Guide bush, Bronze L36-L37
      12
      Alphabetical content
      subject to alterations
      Guide bush, Bronze with solid lubricant
      D160-D161,
      L34-L35
      Guide Bush, headed L27
      Guide bush, sintered ferrite carbonitrided with long-term
      lubrication, ISO 9448-2 D96
      Guide elements - Mounting guidelines, Dimension tablesD292-D298
      Guide elements - Pairing classification D22-D23
      Guide elements - Selection matrix D24
      Guide elements for mould making L9
      Guide pillar L14-L15
      Guide pillar "ECO-Line" endwise bolt-on type, ~DIN 9825/
      ~ISO 9182-2 D38
      Guide pillar "ECO-Line", ~DIN 9825/~ISO 9182-2 D36
      Guide pillar (Angle pin) L25
      Guide pillar DIN 9825/ISO 9182-2 D27
      Guide pillar endwise bolt-on type with ball cage,
      ~DIN 9825/~ISO 9182-2 D34
      Guide pillar endwise bolt-on type,
      ~DIN 9825/~ISO 9182- 2 D32
      Guide pillar for large tools, DIN 9833/ISO 9182-3 D47
      Guide pillar for lifting unit to Mercedes-Benz F148
      Guide pillar with 5° pilot taper, to VW-Standard D48
      Guide pillar with ball cage retainer D28
      Guide pillar with collar D69
      Guide pillar with collar "ECO-LINE" D68
      Guide pillar with collar and ball cage retainer D64
      Guide pillar with collar, screw clamp retention,
      DIN 9825/ ~ISO 9182-5 D62
      Guide pillar with collar, to WDX D60
      Guide pillar with flange L24
      Guide pillar with groove D59
      Guide pillar with groove, to CNOMO D58
      Guide pillar with groove, to VW D50
      Guide pillar with internal thread on both sides,
      ~DIN 9825/~ISO 9182-2 D29
      Guide pillar with internal thread on bottom, ~DIN 9825/
      ~ISO 9182-2 D30
      Guide pillar with internal thread on top, ~DIN 9825/
      ~ISO 9182-2 D31
      Guide pillar with pilot tapper and groove, to Mercedes-
      Benz Standard D56
      Guide pillar with pilot tapper, VDI 3356 D49
      Guide pillar with retaining ring groove, ~AFNOR D52
      Guide pillar with snap ring groove, to Mercedes-Benz
      Standard D54
      Guide pillar, conical, DIN 9825/ISO 9182-4/AFNOR D40
      Guide pillar, shouldered L16-L19
      Guide pin F78
      Guide sleeve L26
      Guide to Mercedes-Benz Standard - hardened D281
      Guide to Mercedes-Benz Standard - unhardened D280
      Guide unit with center fixing MILLION GUIDE D82
      Guide unit with collar MILLION GUIDE D80
      Guide with part position control and spring D282
      Guide with part position control, VDI D283
      Headed guide bush "ECO-LINE", Bronze with solid
      lubricant rings, ISO 9448-6 D126-D128
      Headed guide bush "ECO-LINE", bronzeplated, ISO 9448-6D123-D125
      Headed guide bush for ball bearing, ~AFNOR D150, D152
      Headed guide bush for ball bearing, ISO 9448-7 D129-D133
      Headed guide bush with ball cage retainer D108-D109
      Headed guide bush, bronze coated, ISO 9448-6 D115-D117
      Headed guide bush, sintered ferrite carbonitrided with
      long-term lubrication, ~AFNOR D146-D148
      Headed guide bush, sintered ferrite carbonitrided with
      long-term lubrication, ISO 9448-6 D118-D122
      Helical spring for ball cage retention D268
      Hexagon Nut DIN 6330 B C57
      Hexagon nut with collar, DIN 6331 C58
      Hexagon socket countersunk head cap screw, ISO 10642
      - Strength class 8.8 C64
      Hexagon socket head cap screw, DIN EN ISO 4762 -
      Strength class 12.9 C61
      Hexagon socket head cap screw, DIN EN ISO 4762 -
      Strength class 8.8 C60
      Hexagon socket head cap screw, with low profile head
      and key guide, DIN 6912 - Strength class 8.8 C62
      Hexagon socket head cap screw, with low profile head,
      DIN 7984 - Strength class 8.8 C63
      High performance compression spring DIN ISO 10243 F30-F59
      High performance compression spring, 3XLF, Colour
      "White" F60
      High performance compression spring, XSF, Colour
      "Violet" F28-F29
      High performance compression springs - Cyclic stress
      maxima/minima as applicable to extended/limited life F27
      High performance compression springs - Description F26
      High-Precision special parts to customer´s drawings E192-E193
      Hinge for spacer F113
      Hoisting snap link, omnidirectional C28
      Holding sleeve for lifter units to BMW standard F154
      Hose press, pneumatic F407
      Hose shears F407
      Inductive proximity switch D284, D288
      Injection gun for FIBROFIX®-SECHS H7
      Insert sleeve with thrust pin VDI 3374 Shape A E25
      Insert sleeve with thrust pin VDI 3374 Shape B E26
      Insertion tool F138
      Installation frame for counter view J17
      Instruction for hose assembly in the Minimess system F369
      LCF Gas Spring, damped
      F339-F342,
      F344-F353
      Leak Detector Spray FIBROLIT®-LSP H11
      Lifter pin for press tool strips D273
      Lifter rail for lifter units to BMW standard F154
      Lifter stud C17
      Lifter stud VDI 3366 C15
      Lifter stud with cable securing device C16
      Lifter stud with cable securing device, with welded disc C15
      Lifter unit with installation block to BMW standard F153
      Lifter unit with pillar guidance F158-F159
      Lifter, round with pilot pin hole to BMW standard F152
      Lifting eye bolt, high tensile C18, C25
      Lifting eye bolt, rotatable C19
      Lifting flange with bolt with safety ring C42-C43
      Lifting flange with bolt with safety ring, to AUDI C41
      Lifting flange with bolt with safety ring, to BMW C40
      Lifting flange with bolt with safety ring, with feather key,
      to BMW C45
      Lifting flange with bolt with safety ring, with feather key,
      to CNOMO Standard C44
      Lifting unit (not damped/damped) to Mercedes-Benz F147
      Liner bush for dowel pin, for bonding E200
      Liner bush for dowel pin, for push fit E201
      Locating bolt F76
      Locating bolt, threaded F76
      Locating guide bush, headed L28
      Locating guide pillar, shouldered L20-L23
      Locating plate for guide pillar, to VW D51
      Long-term lubrication for sintered metal plain bearings -
      Oil FIBROLIT®-OEL-LD H15
      Long-term lubrication for sintered metal plain bearings -
      Grease FIBROLIT®-FETT-LD H15
      Manifoldsystems F356
      Marking out blue FIBROLIT®-ARF H13
      Matrix with collar for dynamic stripper (DAE), blank E170
      Matrix with collar for dynamic stripper (DAE), round E172
      Matrix with collar, conical E159
      Matrix with collar, cylindrical E157
      Matrix with collar, DIN 9845 Shape B E155
      Matrix with shoulder, blank, ISO 8977 E135
      13
      Alphabetical content
      subject to alterations
      Matrix with shoulder, rectangle with radiussed corners,
      ISO 8977 E144
      Matrix with shoulder, rectangular, ISO 8977 E140
      Matrix with shoulder, round, ISO 8977 E136
      Matrix with shoulder, slot, ISO 8977 E142
      Matrix with shoulder, square, ISO 8977 E138
      Matrix without collar for dynamic stripper (DAE), blank E169
      Matrix without collar for dynamic stripper (DAE), round E171
      Matrix without collar, conical E158
      Matrix without collar, cylindrical E156
      Matrix without collar, DIN 9845 Shape A E154
      Matrix without shoulder, blank, Automotive Standard E146
      Matrix without shoulder, blank, ISO 8977 E123
      Matrix without shoulder, rectangle with radiused
      corners, Automotive Standard E151
      Matrix without shoulder, rectangle with radiussed
      corners, ISO 8977 E132
      Matrix without shoulder, rectangular, Automotive
      Standard E149
      Matrix without shoulder, rectangular, ISO 8977 E128
      Matrix without shoulder, round, Automotive Standard E147
      Matrix without shoulder, round, ISO 8977 E124
      Matrix without shoulder, slot, Automotive Standard E150
      Matrix without shoulder, slot, ISO 8977 E130
      Matrix without shoulder, square, Automotive Standard E148
      Matrix without shoulder, square, ISO 8977 E126
      Metal adhesive FIBROLIT®-MK H9
      Micro control fitting F390
      Minimess - Compound Threaded Joints F375-F378
      Minimess – Compound Threaded Joints F374
      Mounting arrangement for gas springs in the Minimess
      system F369-F373
      Multiple control fitting F393
      Notes on guide elements A7, D21
      Oil H14
      Oilless guide elements D157-D158
      Oilless guide elements - Mounting examples D250-D253
      O-ring, Viton L61
      Overrun Cam, Bronze with solid lubricant, VDI 3357 D227
      Overrun Cam, Steel hardened and gas nitrided, VDI 3357 D226
      Overrun Cam, Steel hardened, VDI 3357 D225
      Pallet carrier plate A58
      Penetration lubricant spray FIBROLIT®-RL H13
      Pillar wiper D272
      Pilot pin with parabolic tip, ISO 8020 E118
      Pilot pin with tapered tip, ISO 8020 E117
      Pilot unit to Mercedes-Benz Standard E119
      Piloted counterbore for tapered-head punch E31
      Pipe plug (for compresssion spring adjustement) F107
      Pneumatic conveyor J31
      Position monitor for boards D287
      Precision components - Description of materials E16-E17
      Precision feeler gauge B20
      Precision flat and square bar steel with machining
      allowance, DIN 59350 B9-B17, B19
      Precision flat and square bar steel, ~DIN 59350 B8
      Precision flat and square bar steel, DIN 59350 B18
      Press tool lubricant FIBROLIT® H16
      Pressure bolt with base, according to VW D263
      Pressure plate E184
      Pressure plate, shock absorbing F363
      Pressure reservoir F360-F362
      Prismatic guide, Bronze with solid lubricant D239-D240
      Prismatic guide, Steel D242
      Prismatic guide, Steel, NAAMS D237
      Prismatic guide, Steel, VDI 3357 D238
      Progression lamination die set unit A47-A52
      Punch DIN 9844, Shape A E37
      Punch DIN 9844, Shape B E38
      Punch DIN 9861 Shape C E21
      Punch DIN 9861 Shape CA E20
      Punch DIN 9861 Shape D / ISO 6752 E19
      Punch DIN 9861 Shape DA E18
      Punch similar DIN 9844, Shape A E45
      Punch similar DIN 9844, Shape B E46
      Punch similar DIN 9861, Shape C E48
      Punch similar DIN 9861, Shape D E47
      Punch similar to DIN 9861 Shape C E23
      Punch similar to DIN 9861 Shape CA E22
      Punch similar to VDI 3374 E39
      Punch VDI 3374 E24
      Punch with ejector pin E40
      Punch with ejector pin, stepped, long point E42
      Punch with ejector pin, stepped, short point E41
      Punch with head, square / rectangular, Shape B E195
      Punch with tapered head 30°, Shape C E28
      Punch with tapered head 30°, Shape D E27
      Punch with tapered head, blank E32
      Punch with tapered head, blank, with ejector pin E34
      Punch with tapered head, Shape D E30
      Punch with tapered head, stepped, round E33
      Punch with tapered head, stepped, round,
      with ejector pin E35
      Punch without head, square / rectangular, Shape A E194
      Punch, blank, ISO 8020 E105
      Punch, blank, with ejector pin, ISO 8020 E111
      Punch, stepped, rectangle with radiused corners,
      ISO 8020 E110
      Punch, stepped, rectangle with radiussed corners,
      with ejector pin, ISO 8020 E116
      Punch, stepped, rectangular, ISO 8020 E108
      Punch, stepped, rectangular, with ejector pin, ISO 8020 E114
      Punch, stepped, round, ISO 8020 E106
      Punch, stepped, round, with ejector pin, ISO 8020 E112
      Punch, stepped, slot, ISO 8020 E109
      Punch, stepped, slot, with ejector pin, ISO 8020 E115
      Punch, stepped, square, ISO 8020 E107
      Punch, stepped, square, with ejector pin, ISO 8020 E113
      Punches - Mounting guidelines E36
      Punching and embossing unit with matrix for punched
      holes and self tapping screws E210
      Quill holder for core tempering L60
      Rectangular guide, Steel with Rollers L39
      Rectangular Guide, Steel with solid lubricant L38
      Release agent H14
      Release agent FIBROLIT®-TW H14
      Representatives 8-9
      Retaining bolt F86
      Retaining bush for guide pillar conical 2020.64. D78
      Retaining bush for guide pillar conical 2021.50.,
      DIN 9825/ISO 9182-4 D45
      Retaining bush for guide pillar conical 2021.50.,~ AFNOR D46
      Retaining disc with countersunk head cap screw,
      DIN 9825/ISO 9182-4 D44
      Retaining disc with screw D66
      Retaining disc with socket cap screw, ~ AFNOR D44
      Retaining plate, Bronze with solid lubricant D180
      Retaining plate, Bronze with solid lubricant, CNOMO D183
      Retaining plate, Bronze with solid lubricant, VDI 3357 D177
      Retaining plate, Steel with solid lubricant, NAAMS D181
      Retaining plate, Steel with solid lubricant, VDI 3357 D179
      Retaining plate, Steel, CNOMO D182
      Retaining plate, Steel, VDI 3357 D178
      Retaining washer L11
      Retention bearing D85
      Retention bearing for guide pillars for large tools D95
      Retention bearing with screw holes D88
      Retention bearing, low build height D91
      14
      Alphabetical content
      subject to alterations
      Ring block with position lock C24
      Roller cage with assembly aid, Brass D114
      Roller cage with circlip groove, Brass D112
      Roller insert with collar J12
      Roller insert without collar J12
      Roller rail J13
      Roller slide units K5
      Rotary safety eyebolt, heavy duty, with ball bearing C21
      Rotary safety eyebolt, light duty, with ball bearing C20
      Round wire compression spring F61
      Screw clamp with screw D274-D275
      Screw clamp with screw, CNOMO D276
      Screw clamp with screw, GM Standard D275
      Screw clamp with screw, NAAMS D275
      Screw for T-slot, DIN 787 C59
      Screw plug C66
      Screw-in lifter stud VDI 3366 C13
      Screw-in lifter stud with cable securing device C14
      Securing flange with screws, CNOMO D276
      Selection table multiple layering F95
      Sensors for stamping and forming technology J42
      Service station, mobile, for gas springs F406
      Set screw C57
      Setting-up bumper, round F109
      Setting-up bumper, square F110
      Shedder insert F108
      Shock absorbing washer F85, G21
      Shoulder screw F106
      Silicon oil H14
      Single-sided prismatic guide, Bronze with solid lubricant D244, D248
      Single-sided prismatic guide, Bronze with solid lubricant,
      CNOMO D246
      Single-sided prismatic sliding block, Steel D245, D249
      Single-sided prismatic sliding block, Steel, CNOMO D247
      Sleeve for lifting unit to Mercedes-Benz F149
      Slide centre guide, Bronze with solid lubricant D224
      Slide stop F88, F90
      Sliding block, Bronze with solid lubricant D243
      Sliding block, Bronze with solid lubricant, NAAMS D237
      Sliding block, Bronze with solid lubricant, VDI 3357 D238
      Sliding block, Steel D239-D240
      Sliding pad, Bronze with oil groove, CNOMO D210
      Sliding pad, Bronze with solid lubricant
      D194-D196,
      D198
      Sliding pad, Bronze with solid lubricant, AFNOR/
      ISO 9183- 2 D204
      Sliding pad, Bronze with solid lubricant, CNOMO D197
      Sliding pad, Bronze with solid lubricant, ISO 9183-1 D192
      Sliding pad, Bronze with solid lubricant, NAAMS D202
      Sliding pad, Bronze with solid lubricant, VDI 3357
      D186, D211,
      D214
      Sliding pad, small dimension, Bronze with solid lubricant D184
      Sliding pad, Special cast iron (GG25) with solid lubricant,
      AFNOR/ISO 9183-2 D206
      Sliding pad, Steel with oil groove, CNOMO D208
      Sliding pad, Steel with sinterlayer, VDI 3357 D190
      Sliding pad, Steel with solid lubricant D201
      Sliding pad, Steel, CNOMO D200
      Sliding pad, Steel, NAAMS D203
      Sliding pad, Steel, VDI 3357 D188, D212
      Slotted nut D156
      Slotted nut DIN 1804 D79
      Snap ring D57
      Spacer bush D266
      Spacer for die release F111
      Spacer plate toothed, with adjusting plate D278
      Spacer plug F83
      Spacer sleeve F82
      Spacer sleeve for lifting units to Mercedes-Benz F151
      Spacer tube D266, F80
      Spacer with spring for die release F112
      Special die set to customer's specifications A43-A46
      Spigot holder A42, C13
      Spring and spacer unit F104
      Spring- and spacer unit F100-F101
      Spring- and spacer unit, low installation space F102
      Spring and spacer unit, with hexagon socket countersunk
      head cap screw F105
      Spring mounted roller to VW Standard J14-J15
      Spring plunger, increased spring force, VDI 3004,
      Colour marking: red F120
      Spring plunger, low maintenance, increased spring force,
      VDI 3004, Colour marking: red F121
      Spring plunger, low maintenance, medium spring force,
      VDI 3004, Colour marking: white F119
      Spring plunger, low maintenance, standard spring force,
      VDI 3004, Colour marking: yellow F117
      Spring plunger, medium spring force, VDI 3004,
      Colour marking: white F118
      Spring plunger, standard spring force, VDI 3004,
      Colour marking: yellow F116
      Spring plunger, with spring loaded ball, straight version F135
      Spring plunger, with spring loaded ball, straight version,
      with collar F136-F137
      Spring plunger, with spring loaded ball, with hexagon
      socket, increased spring force F125
      Spring plunger, with spring loaded ball, with hexagon
      socket, standard spring force F124
      Spring plunger, with spring loaded ball, with slot,
      increased spring force F123
      Spring plunger, with spring loaded ball, with slot,
      standard spring force F122, F126
      Spring plunger, with spring loaded pin and seal, with
      hexagon socket, increased spring force F131
      Spring plunger, with spring loaded pin and seal, with
      hexagon socket, standard spring force F130
      Spring plunger, with spring loaded pin, straight version,
      with collar F135
      Spring plunger, with spring loaded pin, with hexagon
      socket, increased spring force F132
      Spring plunger, with spring loaded pin, with hexagon
      socket, standard spring force F129
      Spring plunger, with spring loaded pin, with slot,
      increased spring force F131, F134
      Spring plunger, with spring loaded pin, with slot,
      standard spring force
      F127-F128,
      F133
      Spring plungers F115
      Spring ram with gas spring F160
      Spring ram with gas spring to VW standard F161
      Spring unit for elastomer spring F98
      Spring unit for helical spring F99
      Stacking washer DIN ISO 10069-2 F77
      Stand for conveyor belt J28
      Standard cam slide units K4
      Standardised special shapes E161-E165
      Steel plate ISO 6753-1 A38, B6
      Stepped Block DIN 6318 C56
      Stock lifter F142-F143
      Stock lifter with attachment lug F144
      Stop buffer F89
      Stripper F145
      Stripper for blanking dies F114
      Stripping unit - Mounting plate E188
      Stripping unit - Pressure plate E187
      Stripping unit for punches E186
      Stripping unit, flanged mounting F141
      Stripping unit, wall and bottom mounting F140
      Support, adjustable C56
      T-Guide bar, Bronze with solid lubricant D236
      Thinning agent for FIBROLIT®-ZWO H9
      15
      Alphabetical content
      subject to alterations
      Thinning agent for FIBROLIT®-ZWO - Technical data H8
      Threaded die set shank DIN ISO 10242-1 C10
      Threaded disc for compression springs F84
      Threaded disc for elastomer springs F84
      Thrust Pad F364
      Thrust pad driver F138
      Thrust plate F364-F365
      Thrust plate to Renault standard F365
      Thrust washer F77, F86
      Thrust washer, Bronze with solid lubricant D159
      Tooling pallet die set A53-A57
      Tooling pallet die set - Accessories A58
      Tooling resin FIBROFIX®-SECHS H7
      Tooling resin FIBROFIX®-SECHS - Technical data H6
      Tooling resin FIBROLIT®-ZWO H7
      Tooling resin FIBROLIT®-ZWO - Technical data H6
      Toolkit for assembling gas springs F404
      Triangle retainer for ball-lock punches, heavy duty E175, E177
      Triangle retainer for ball-lock punches, light duty E174, E176
      Triangle retainer, for punches ISO 8020 with
      anti- rotation element E183
      Triangle retainer, for punches ISO 8020 without
      anti- rotation element E182
      Triple vortice ring C30
      Trust washer for compression springs F79
      Trust washer for elastomer springs F78
      Tubular Spring Element, Rubber 70 Shore A F74
      Universal lifter unit according to BMW standard F155
      Universal lifter unit, according to BMW standard F156
      Universal rotary safety eyebolt with eye hook C23
      Universal rotary safety eyebolt with oval ring C22
      Washer E191, F81-F82
      Washer DIN 6340 C58
      Wireless Pressure Monitoring - wireless monitoring of
      gas springs F396-F398
      Wooden box E208
      16
      Numerical content
      subject to alterations
      201.01. A10
      201.03. A11
      201.05. A12
      201.07. A13
      201.11. A14
      201.13. A15
      201.145. A41
      201.21. A16
      201.23. A17
      201.26. A18
      201.31. A19
      201.33. A20
      201.36. A21
      201.39. A22
      201.45. A32
      201.46. A33
      201.47. A34
      201.49. A35
      201.50. A47-A52
      201.65. A32
      201.66. A33
      201.67. A34
      201.69. A35
      201.95. A53-A57
      201.96. A58
      201.97. A58
      201.98. A59
      2010. A24-A31
      2010.55. A36-A37
      2010.57. A36-A37
      2010.59. A36-A37
      2011.45. A40
      2016. K4
      2016.23. K6
      2016.25. K7
      2016.4x. K8
      2017. K5
      2018. K3
      2018.00.60.08.030 D284
      2018.00.60.23.01.5 D285
      2018.00.60.23.02.5 D285
      202.17. D28
      202.19. D27
      202.21. D32
      202.22. D29
      202.23. D30
      202.24. D31
      202.29. D36
      202.31. D38
      202.53. D44
      202.55. D34
      202.60 D76
      202.61. D69
      202.91. D269
      202.92.1. D270
      202.93. D271
      2020.62. D74
      2020.63. D72
      2020.64. D77
      2021.29. D68
      2021.39. D45
      2021.43. D66
      2021.44. D64
      2021.46. D62
      2021.50. D40
      2021.53. D44
      2021.58. D42
      2021.64. D78
      2022.12. D56
      2022.13. D48
      2022.15. D49
      2022.16. D54
      2022.16.45. D58
      2022.16.48. D59
      2022.17. D50
      2022.19. D47
      2022.25. D52
      2022.29. D60
      2022.40.1. D51
      2024.94. D80
      2024.96. D82
      2025.94. D67
      2031.01. D85
      2031.02. D88
      2031.04. D91
      2031.31. D86
      2031.34. D89
      2031.38. D92
      2031.41. D87
      2031.42. D90
      2031.44. D93
      2031.70. D84
      2032.02. D95
      2032.70. D94
      2051.32. D96
      2051.72. D98
      2051.92. D97
      2052.70. D160-D161
      2052.71. F162
      2053.70. D159
      206.41. D71
      206.49. D100
      206.51. D26
      206.54. D26
      206.71. D102
      206.72. D113
      206.73. D104
      206.75. D106
      206.91. D265
      206.92. D267
      206.93. D266
      206.94. D266
      206.95./2061.95. D272
      2060.61. D103
      2060.63. D105
      2060.65. D107
      2061.44. D70, D99
      2061.47. D101
      2061.48. D57
      2061.82. D112
      2061.84. D114
      2062.44.012. D70
      207.45 D274
      207.48. D156
      2071.45 D274
      2072.45. D274
      2072.46 D275
      2072.46.30. D275
      2072.47 D275
      2072.48.45. D276
      2073.45. D276
      2073.46. D53
      2073.48. D79
      2081.31. D118
      2081.32. D119
      2081.33. D120
      2081.34. D121
      2081.35. D122
      2081.44. D129
      2081.45. D130
      2081.46. D131
      2081.47. D132
      2081.49. D133
      2081.67. D108
      2081.68. D109
      2081.71. D126
      2081.74. D127
      2081.75. D128
      2081.81. D115
      2081.84. D116
      2081.85. D117
      2081.91. D123
      2081.94. D124
      2081.95. D125
      2082.70. D166
      2082.71. D167
      2085.70. D162
      2085.71. D163
      2085.72. D165
      2086.70. D164
      2086.71. D168
      2087.70. L31
      2087.71. L32
      2087.72. L30
      2087.73. L33
      2091.31. D134
      2091.32. D135
      2091.34. D136
      2091.44. D143
      2091.45. D144
      2091.46. D145
      2091.67. D110
      2091.68. D111
      2091.71. D140
      2091.72. D141
      2091.74. D142
      2091.91. D137
      2091.92. D138
      2091.94. D139
      210.31. D146
      210.34. D147
      210.35. D148
      210.39. D46
      210.44. D150
      210.45. D154
      210.46. D152
      210.85. D155
      2102.70. D169
      2102.71. D170
      211.11. C10
      211.12. C10
      211.13. C11
      211.14. C11
      212.11. A42, C12
      212.15. A42, C12
      212.16. C13
      212.16.1. A42
      213.12. C13
      213.13. C17
      2130.03. C14
      2130.11. C15
      2130.12. C15
      2130.13. C16
      2131.10. C18
      2131.11. C19
      2131.20. C20
      2131.21. C21
      2131.22. C24
      2131.23. C23
      2131.25. C22
      2131.30. C25
      2131.31. C26
      2131.32. C27
      2131.33. C28
      2131.34. C29
      2131.35. C30
      2131.36. C31
      2131.37. C32
      2131.38. C33
      2131.39. C34
      2131.42. C37
      2131.43. C38
      2131.50. C39
      2132.10. C46
      2132.10.03. .1 C49
      2132.10.55. C47
      2132.11. C48
      2133.11. C40
      2133.11.10. C41
      2133.12. C42-C43
      2133.12. .1 C50
      2133.13. C44
      2133.15. C45
      2134.41. C36
      2140.01.01. C68
      2140.01.02. C69
      2140.02. C57
      2140.10. C54
      2140.11. C55
      2140.13. C53
      2140.14. C53
      2140.15. C52
      2140.16. C54
      2140.17. C52
      2140.18. C55
      2140.19. C56
      2140.20. C56
      2140.30. C59
      2140.32. C57
      2140.33. C58
      2140.34. C58
      2191. J42
      2192.10. C60
      2192.12. C61
      2192.20. C62
      2192.30. C64
      2192.40. C63
      2192.61. C65
      2192.90. C66
      2195.114. J26
      2195.115. J26
      2195.116. J26
      2195.117. J26
      2195.120./121. J28
      2195.130./131. J28
      2195.140./141. J28
      2195.150./151. J28
      2195.218. J27
      2195.219. J27
      2195.220. J27
      2195.221. J27
      2195.301. J22
      17
      Numerical content
      subject to alterations
      2195.302. J23
      2195.401. J24
      2195.402. J25
      2198.32. J10
      2198.33. J10
      2198.34. J12
      2198.35. J12
      2198.42. J11
      2198.44. J13
      2198.50.55. J14-J15
      2199.03/10/40.1/70 J31
      220. E37
      2201. E105
      2202. E51
      2203. E77
      2204. E63
      2205. E89
      2206. E32
      221. E38
      2211. E106
      2212. E52
      2213. E78
      2214. E64
      2215. E90
      2216. E33
      222. E18
      2221. E107
      2222. E53
      2223. E79
      2224. E65
      2225. E91
      223. E19
      2231. E108
      2232. E54
      2233. E80
      2234. E66
      2235. E92
      224. E20
      2241. E109
      2242. E55
      2243. E81
      2244. E67
      2245. E93
      225. E21
      2251. E110
      2252. E56
      2253. E82
      2254. E68
      2255. E94
      2261. E117
      2262. E75
      2263. E101
      2271. E118
      2272. E76
      2273. E102
      2276. E119
      2280.01. L58
      2280.02. L59
      2281. E27
      2282.01. E210
      2284.00. E31
      2284.3. E30
      2291. E28
      2299.001. J35
      2299.002. J35
      2299.011. J36
      2299.012. J36
      2299.121. J37
      2299.122. J37
      2299.221. J38
      2299.222. J38
      2299.510 J39
      2299.511 J39
      2299.520 J40
      2299.530 J41
      2299.540 J40
      2299.541 J40
      230. E194
      231. E195
      232. E24
      233. E25
      234. E26
      235.1. E202
      2351.1. E203
      236.001. E198
      236.1. E196
      2361.1. E197
      237.1. L44-L45
      237.8. L46-L47
      238.1. L48
      238.8. L49
      239.1. L50-L51
      239.8. L52
      2398. J7-J9
      240.1./2. E206
      240.11. E209
      240.22. E209
      240.31. E209
      240.32. E209
      240.45. E208
      240.91. E208
      240.92. E208
      241.00.1. F107
      241.02. F61
      241.13. F28-F29
      241.14.10. F30
      241.14.13. F32
      241.14.16. F34
      241.14.20. F38
      241.14.25. F42
      241.14.32. F46
      241.14.40. F50
      241.14.50. F54
      241.14.63. F58
      241.15.10. F30
      241.15.13. F32
      241.15.16. F35
      241.15.20. F39
      241.15.25. F43
      241.15.32. F47
      241.15.40. F51
      241.15.50. F55
      241.15.63. F59
      241.16.10. F31
      241.16.13. F33
      241.16.16. F36
      241.16.20. F40
      241.16.25. F44
      241.16.32. F48
      241.16.40. F52
      241.16.50. F56
      241.17.10. F31
      241.17.13. F33
      241.17.16. F37
      241.17.20. F41
      241.17.25. F45
      241.17.32. F49
      241.17.40. F53
      241.17.50. F57
      241.18. D268
      241.19. F60
      242.01. F62
      243.7. E190
      243.7. .1 E191
      2431.40. C35
      2431.7. E186
      244.00.2. D273
      244.1. F64
      244.10. F82
      244.10.15. F81
      244.11. F82
      244.12. F83
      244.13. F83
      244.14.0. F98
      244.15.0. F99
      244.16. F104
      244.17. F106
      244.18. F105
      244.20./25./32./40. F100-F101
      244.20./25./32./
      40.3. F102
      244.4. F77
      244.5. F78
      244.6. F78
      244.7. F79
      244.9. F80
      2441.11. D255
      2441.11.0. D254
      2441.11.3. D256
      2441.13. D259
      2441.13.3. D260
      2441.13.3.45. D258
      2441.13.45. D257
      2441.14. F84
      2441.14.1. F98
      2441.15. F84
      2441.15.1. F99
      2441.16. F86
      2441.18. F86
      2441.3. F77
      2441.5. F76
      2441.6. F76
      2442.12. L10
      2442.12.3. L11
      2442.12.4. L11
      2442.13. L10
      2443.10. D279
      2443.10.20. D280
      2443.10.20. .1 D281
      2443.12. D282
      2443.13. D283
      2443.14.00.60.18.04 4 D288
      2443.14.00.60.23.01. 5 D289
      2443.14.00.60.23.02. 5 D289
      2443.14.55. D287
      2444.12 / 2444.13 D278
      2445.10. D261
      2445.11. D262
      2446.10.55. D263
      2446.11.55. D264
      2450. F85, G21
      2450.10A. F92
      2450.11B. F93
      2450.20□. F94-F95
      2451.10D. F96
      2451.6. F88
      2451.6. .2 F89
      2452.10. F90
      2452.10. .2 F97
      246.5. F66
      246.6. F68, F87
      246.7. F70
      2461.2. F74
      2461.4. F72
      247.6. F108
      2470.10. .1 F116
      2470.10. .2 F120
      2470.10. .3 F118
      2470.10.11 F138
      2470.12.010.017 F138
      2470.20. .1 F117
      2470.20. .2 F121
      2470.20. .3 F119
      2471.01. F122
      2471.02. F123
      2471.03. F124
      2471.04. F125
      2471.05. F126
      2471.31. F122
      2471.32. F123
      2471.33. F124
      2471.34. F125
      2471.35. F126
      2471.6. F108
      2472.01. F127
      2472.02. F131
      2472.03. F129
      2472.04. F132
      2472.05. F133
      2472.06. F134
      2472.07. F130
      2472.08. F131
      2472.11. F138
      2472.21. F128
      2472.22. F128
      2472.31. F127
      2472.33. F129
      2472.34. F132
      2472.35. F133
      2472.36. F134
      2472.37. F130
      2473.01. F135
      2473.02. F135
      2475.01. F136
      2475.02. F136
      2475.03. F137
      2475.04. F137
      2477. .1.01 F140
      2477. .1.02 F141
      2478. F160
      2478.10. F142
      2478.20. .1 F161
      2478.20.15.10 F152
      2478.20.15.20. F153
      2478.20.15.23. F154
      2478.20.15.24. F154
      2478.20.15.30. F155
      2478.20.15.40. F156
      2478.20.20. F147
      2478.20.20.1. F148
      2478.20.20.2. F149
      18
      Numerical content
      subject to alterations
      2478.20.20.3 F150
      2478.20.20.4 F151
      2478.25.00090. F158
      2478.25.00200. F159
      2478.30. .1 F143
      2478.30. .2 F144
      2478.30. .3 F145
      2479.030. F176
      2479.031. F177
      2479.032. F178
      2479.034. F179
      2480.00.10. F379-F380
      2480.00.22. F388
      2480.00.23. F374
      2480.00.24. F375-F378
      2480.00.25. F383
      2480.00.26. F382, F384
      2480.00.27. F386
      2480.00.27.01. F385
      2480.00.28. F387-F389
      2480.00.30. F391
      2480.00.30.13 F392
      2480.00.30.14 F392
      2480.00.31. F391
      2480.00.31.02 F399
      2480.00.31.11 F394
      2480.00.32.07 F399
      2480.00.32.21 F399
      2480.00.32.71. F400-F401
      2480.00.34. F390
      2480.00.35. F402
      2480.00.35.04 F403
      2480.00.39.05. F393
      2480.00.45. F395
      2480.00.50.04 F405
      2480.00.50.11 F404
      2480.00.50.20. F406
      2480.00.54.03 F407
      2480.00.54.10 F407
      2480.00.70. F360-F362
      2480.00.90. F396-F398
      2480.004. F364
      2480.009. F364
      2480.015. F363
      2480.018. F364
      2480.019. F365
      2480.019.45. F365
      2480.080. F366-F367
      2480.12.01500. F202-F203
      2480.12.10000. F210-F211
      2480.13.00250. F196-F197
      2480.13.00500. F198-F199
      2480.13.00750. F200-F201
      2480.13.03000. F204-F205
      2480.13.05000. F206-F207
      2480.13.07500. F208-F209
      2480.21. F188-F189
      2480.22. .1 F190-F191
      2480.23. F192-F193
      2480.32. F328-F329
      2480.32.00250. F330-F331
      2480.33. F336
      2480.82.00250. F332-F333
      2482.72. F182-F183
      2482.73. .1 F184-F185
      2482.74. .2 F186-F187
      2484.12.01500. F346-F347
      2484.13.00750. F344-F345
      2484.13.03000. F348-F349
      2484.13.05000. F350-F351
      2484.13.07500. F352-F353
      2485.12.00500. F296-F297
      2485.12.00750. F298-F299
      2485.12.01500. F300-F301
      2486.12.00750. F306-F307
      2486.12.01500. F308-F309
      2486.12.03000. F310-F311
      2486.12.05000. F312-F313
      2486.22.03000. F318-F319
      2486.22.05000. F320-F321
      2486.22.07500. F322-F323
      2487.12.00170. F240-F241
      2487.12.00320. F242-F243
      2487.12.00350. F244-F245
      2487.12.00500. F246-F247
      2487.12.00750. .1 F248-F249
      2487.12.01000. .1 F250-F251
      2487.12.01500. F252-F253
      2487.12.02400. F254-F255
      2487.12.04200. F256-F257
      2487.12.06600. F258-F259
      2487.12.09500. F260-F261
      2487.12.20000. F262-F263
      2487.82.01000. F335
      2488.13.00750. F214-F215
      2488.13.01000. F216-F217
      2488.13.01500. F218-F219
      2488.13.02400. F220-F221
      2488.13.04200. F222-F223
      2488.13.06600. F224-F225
      2488.13.09500. F226-F227
      2488.13.20000. F228-F229
      2489. F354
      2490.14.00420. F274-F275
      2490.14.00750. F276-F277
      2490.14.01000. F278-F279
      2490.14.01800. F280-F281
      2490.14.03000. F282-F283
      2490.14.04700. F284-F285
      2490.14.07500. F286-F287
      2490.14.11800. F288-F289
      2490.14.18300. F290-F291
      2491. F355
      2494. F357
      2495. F356
      2496.12.00270. F232-F233
      2496.12.00490. F234-F235
      2496.12.01060. F236-F237
      2497.12.00500. F266-F267
      2497.12.01000. F268-F269
      2497.12.01900. F270-F271
      250. G12
      251. G10
      2511.3. G18
      252. G11
      252.7. F110
      253. G14
      2531.4. G19
      2531.7. F109
      2532.2. F114
      2533.00.01. F113
      2533.10. F111
      2533.20. F112
      254. G15
      2541.4. G20
      255. G13
      256. G16
      257. G17
      260. E154
      2601. E158
      2602. E156
      2605. E146
      2606. E123
      2607. E135
      261. E155
      2611. E159
      2612. E157
      2615. E147
      2616. E124
      2617. E136
      2618. E166
      2618.06. E169
      2618.07. E170
      2618.16. E171
      2618.17. E172
      262. E152
      2621. E153
      2625. E148
      2626. E126
      2627. E138
      263.1. L54
      263.8. L55
      2635. E149
      2636. E128
      2637. E140
      264.1. L56
      264.8. L57
      2645. E150
      2646. E130
      2647. E142
      265.1. E200
      2650.1. E201
      2655. E151
      2656. E132
      2657. E144
      266. E39
      2664.02. E182
      2664.04. E183
      2664.05. E174
      2664.06. E175
      2664.07. E176
      2664.10. E177
      2665.01. E184
      2667.1. E187
      2667.2. E188
      2668.2. E179
      2668.3. E180
      267. E40
      268. E41
      269. E42
      270. E45
      2701. E111
      2702. E57
      2703. E83
      2704. E69
      2705. E95
      2706. E34
      271. E46
      2711. E112
      2712. E58
      2713. E84
      2714. E70
      2715. E96
      2716. E35
      272. E47
      2721. E113
      2722. E59
      2723. E85
      2724. E71
      2725. E97
      273. E48
      2731. E114
      2732. E60
      2733. E86
      2734. E72
      2735. E98
      274. E22
      2741. E115
      2742. E61
      2743. E87
      2744. E73
      2745. E99
      275. E23
      2751. E116
      2752. E62
      2753. E88
      2754. E74
      2755. E100
      276. E204
      277. E205
      280.02 H7
      280.05 H7
      280.08 H7
      280.09 H7
      280.131 H13
      280.15 H13
      280.20 H11
      280.23 H13
      280.24 H9
      280.27 H14
      280.34 H15
      280.35 H15
      280.36.006 H16
      280.8001 H14
      280.8021 H14
      280.822405 H14
      281.01 H9
      281.147 H12
      281.243 H10
      281.270 H10
      281.401 H12
      281.454 H12
      281.648 H10
      281.706 H11
      2900. A38, B6
      2910. A39, B7
      2922.1730. B8
      2922.2842. B18
      2923.0570. B9
      2923.2099. B10
      2923.2162. B11
      2923.2312. B12
      2923.2343. B13
      2923.2363. B14
      2923.2379. B15
      2923.2436. B16
      2923.2767. B17
      2923.2842. B19
      2925. B20
      2960.30. D190
      2960.44.45. D208
      2960.54.45. D210
      19
      Numerical content
      subject to alterations
      2960.70. D192
      2960.71. D186
      2960.72. D184
      2960.73. D222
      2960.74. D204
      2960.75. D206
      2960.76. D196
      2960.79. D202
      2960.80. D203
      2960.81. D211
      2960.85. D194
      2960.86. D195
      2960.87. D188
      2960.88. D212
      2960.89. D223
      2960.90. D225
      2960.91. D226
      2960.92. D227
      2960.93. D214
      2961.70. D175
      2961.71. D171
      2961.73. D174
      2961.74. D177
      2961.75. D176
      2961.76. D172
      2961.77. D173
      2961.78. D180
      2961.79. D178
      2961.79.45. D182
      2961.81. D179
      2961.81.45. D183
      2961.82. D181
      2962.70. D228
      2962.70.45. D229
      2962.71. D230
      2962.72. D231
      2962.73. D232
      2962.74. D219
      2962.75. D215
      2962.75.45. D216
      2962.76. D217
      2962.77. D218
      2962.78. D198
      2962.78.45. D197
      2962.79. D220
      2962.80. D221
      2962.81. D233
      2962.82. D234
      2962.83. D235
      2962.84.45. D200
      2962.85. D201
      2963.70. D239
      2963.71. D239
      2963.72. D240
      2963.73. D240
      2963.80. D243
      2963.81. D242
      2963.82. D237
      2963.83. D237
      2963.84. D238
      2963.85. D238
      2964.77. D236
      2964.78. D236
      2965.80. D248
      2965.80.45. D246
      2965.81. D244
      2965.82. D249
      2965.82.45. D247
      2965.83. D245
      2966.72. D224
      2967.10. L42
      3100.04. L13
      3100.09. L26
      3110.11. L25
      3111.10. L15
      3111.20. L16-L19
      3111.21. L20-L23
      3111.31. L24
      3120.40. L27
      3120.42. L28
      3120.65. L29
      3120.70. L34-L35
      3120.71. L36-L37
      3131.40. L38
      3131.80. L39
      3202.12. L14
      3202.13. L14
      3300.10. L12
      3479.030. L72
      3479.032. L73
      3487.12.00300. L74-L75
      3487.12.00500. L76-L77
      3487.12.00750. L78-L79
      3487.12.01000. L80-L81
      3710.00.12.01 J17
      3710.12.01 J16
      3800.01.01.01. L61
      3820.10. L60
      20
      2000.500.008 GB 07/2002
      Experience and expertise
      you can rely on
      FIBRO Quality Assurance
      2000.500.008 GB 07/2002
      Experience and expertise
      you can rely on
      FIBRO Quality Assurance
      21
      FIBRO is renowned for its quality world-wide. This high quality is achieved
      through our dedication and commitment to Quality Assurance.
      FIBRO testing starts on the raw material and continues right through
      production to the completed product. The test facilities themselves are
      also subject to stringent continuous testing. Only by setting itself such
      stringent standards can a company support its customers long term in
      safety, cost-effectiveness and quality.
      Tests during production
      Precision shape and contour testing equipment is used directly in
      production. This ensures early confirmation of the quality of the product.
      The shape testing equipment tests for qualities such as roundness,
      concentricity, straightness and rectangularity.
      FIBRO state of the art technology provides 3D visualisation of
      concentricity, coaxiality and cylindricity.
      Materials testing - raw materials to
      specification
      The FIBRO laboratories carry out microscopic investigation of the raw
      materials, including enlargement to 2,500 times natural size.
      Spectral analysis determines whether the material is correct in terms of
      chemical composition.
      Hardening – hardness testing
      All the process parameters in the hardening process in our own hardening
      shop are recorded and documented.
      Hardness testing is used to monitor the results of the hardening process
      on every batch.
      Final tests
      For precision at micro level if certain basic requirements have to be met.
      It goes without saying that the temperature of the measuring room at
      FIBRO is kept at 20ºC. Here the fine precision FIBRO products are
      measured after production before being released to the customer.
      FIBRO GmbH · Standard Parts Division
      Postfach 1120 · D-74851 Hassmersheim
      T +49 6266-73-0* · F +49 6266-73-237
      e-mail: info@fibro.de · www.fibro.com
      Experience and expertise
      you can rely on
      FIBRO Quality Assurance
      22
      FIBRO is renowned for its quality world-wide. This high quality is achieved
      through our dedication and commitment to Quality Assurance.
      FIBRO testing starts on the raw material and continues right through
      production to the completed product. The test facilities themselves are
      also subject to stringent continuous testing. Only by setting itself such
      stringent standards can a company support its customers long term in
      safety, cost-effectiveness and quality.
      Tests during production
      Precision shape and contour testing equipment is used directly in
      production. This ensures early confirmation of the quality of the product.
      The shape testing equipment tests for qualities such as roundness,
      concentricity, straightness and rectangularity.
      FIBRO state of the art technology provides 3D visualisation of
      concentricity, coaxiality and cylindricity.
      Materials testing - raw materials to
      specification
      The FIBRO laboratories carry out microscopic investigation of the raw
      materials, including enlargement to 2,500 times natural size.
      Spectral analysis determines whether the material is correct in terms of
      chemical composition.
      Hardening – hardness testing
      All the process parameters in the hardening process in our own hardening
      shop are recorded and documented.
      Hardness testing is used to monitor the results of the hardening process
      on every batch.
      Final tests
      For precision at micro level if certain basic requirements have to be met.
      It goes without saying that the temperature of the measuring room at
      FIBRO is kept at 20ºC. Here the fine precision FIBRO products are
      measured after production before being released to the customer.
      FIBRO GmbH · Standard Parts Division
      Postfach 1120 · D-74851 Hassmersheim
      T +49 6266-73-0* · F +49 6266-73-237
      e-mail: info@fibro.de · www.fibro.com
      Experience and expertise
      you can rely on
      FIBRO Quality Assurance
      A
      B
      C
      D
      E
      F
      G
      H
      J
      K
      L
      Die Sets
      Precision Ground Plates and Flat Bars
      Lifting and Clamping Devices
      Guide elements
      Ground Precision Components
      Springs
      Elastomer-Bars, -Sheets, -Sections
      FIBRO Chemical Tooling Aids
      Peripheral Equipment
      Cam Units
      Standard Parts for Mould Making
      Die Sets
      Cast iron, steel and aluminium die set press units
      Lamination die set units, tooling pallet die sets
      Cast Iron-,
      All-Steel- and
      Aluminium
      Die Sets
      A2 subject to alterations
      Cast Iron-, All-Steel- and Aluminium
      Die Sets and Plates
      Remarks and Guide Lines
      Execution
      Contour faces of FIBRO Steel Die Sets are fully machined.
      Contour faces of Aluminium Die Sets are sawn, as are those
      of Aluminium Plates. However, these contour faces can also
      be machined on request. To all die set plates, a general
      thickness tolerance of ± 2 mm applies.
      Guide Elements
      Guide pillars DIN 9825/ISO 9182 (209.19.) and headed
      guide bushes DIN 9831/ISO 9448 (2081.) are normal
      equipment on all-steel die sets.
      Detailed information under Guide Elements.
      Lifting Aids on Die Sets
      Plate sizes with edges a1+b1 ^ 1000 mm, and die sets
      weighting more than 100 kg, are fitted with threaded holes
      for two lifter eyebolts per plate. Eyebolts etc. are supplied
      against special order.
      Special Die Sets and Plates to
      Customers’ Drawings
      Die sets and plates up to size 22003 1100 mm (external
      dims.) will be made to customer’s drawings, with any
      special features and highest precision.
      Special Machining Features
      Wherever possible, all larger apertures or holes should be
      done by FIBRO before final machining of die sets, for their
      application at the customer’s works must result in die set
      distortion and impairment of accuracy.
      Enquiry Forms for Special Die Sets
      Special pre-printed forms for enquiries and ordering are
      available on request. All the customer has to do is the
      filling-in of dimensions and the specifying of guide ele-
      ments or special machining features where applicable.
      Cast Iron-,
      All-Steel- and
      Aluminium
      Die Sets
      subject to alterations
      Cast Iron-, All-Steel- and Aluminium
      Die Sets and Plates
      Remarks and Guide Lines
      Execution
      Contour faces of FIBRO Steel Die Sets are fully machined.
      Contour faces of Aluminium Die Sets are sawn, as are those
      of Aluminium Plates. However, these contour faces can also
      be machined on request. To all die set plates, a general
      thickness tolerance of ± 2 mm applies.
      Guide Elements
      Guide pillars DIN 9825/ISO 9182 (209.19.) and headed
      guide bushes DIN 9831/ISO 9448 (2081.) are normal
      equipment on all-steel die sets.
      Detailed information under Guide Elements.
      Lifting Aids on Die Sets
      Plate sizes with edges a1+b1 ^ 1000 mm, and die sets
      weighting more than 100 kg, are fitted with threaded holes
      for two lifter eyebolts per plate. Eyebolts etc. are supplied
      against special order.
      Special Die Sets and Plates to
      Customers’ Drawings
      Die sets and plates up to size 22003 1100 mm (external
      dims.) will be made to customer’s drawings, with any
      special features and highest precision.
      Special Machining Features
      Wherever possible, all larger apertures or holes should be
      done by FIBRO before final machining of die sets, for their
      application at the customer’s works must result in die set
      distortion and impairment of accuracy.
      Enquiry Forms for Special Die Sets
      Special pre-printed forms for enquiries and ordering are
      available on request. All the customer has to do is the
      filling-in of dimensions and the specifying of guide ele-
      ments or special machining features where applicable.
      A3
      Contents
      subject to alterations
      Notes on guide elements
      201.01.
      Die set DIN 9812 Type D/DG
      201.03.
      Die set DIN 9814 Type D/DG
      201.05.
      Die set DIN 9816 Shape D
      201.07.
      Die set ~DIN 9816 Shape D
      201.11.
      Die set DIN 9812 Shape C/CG
      201.13.
      Die set DIN 9814 Shape C/CG
      201.21.
      Die set DIN 9819 Shape C/CG
      201.23.
      Die set
      201.26.
      Die set
      201.31.
      Die set DIN 9822 Shape C
      201.33.
      Die set
      201.36.
      Die set
      201.39.
      Fine blanking die set
      2010.
      Die set ~DIN 9868/ISO 11415
      201.45.
      Die set to customers’ specifications,
      Steel
      A4
      A7
      A10
      A11
      A12
      A13
      A14
      A15
      A16
      A17
      A18
      A19
      A20
      A21
      A22
      A24-31
      A32
      Contents
      subject to alterations
      201.65.
      Die set to customers’ specifications,
      Aluminium
      201.46.
      Die set to customers’ specifications,
      Steel
      201.66.
      Die set to customers’ specifications,
      Aluminium
      201.47.
      Die set to customers’ specifications,
      Steel
      201.67.
      Die set to customers’ specifications,
      Aluminium
      201.49.
      Die set to customers’ specifications,
      Steel
      201.69.
      Die set to customers’ specifications,
      Aluminium
      2010.55.
      Die set ECO-LINE
      2010.57.
      Die set ECO-LINE
      2010.59.
      Die set ECO-LINE
      2900.
      Steel plate ISO 6753-1
      2910.
      Aluminium plate ~ISO 6753-1
      2011.45.
      Die set press unit
      201.145.
      Die set press unit
      Die set press units - Accessories
      212.16.1.
      Spigot holder
      A5
      A32
      A33
      A33
      A34
      A34
      A35
      A35
      A36-37
      A36-37
      A36-37
      A38
      A39
      A40
      A41
      A42
      A42
      Contents
      subject to alterations
      212.11.
      Coupling spigot
      212.15.
      Coupling spigot
      Special die set to customer's specifi-
      cations
      201.50.
      Progression lamination die set unit
      201.95.
      Tooling pallet die set
      Tooling pallet die set - Accessories
      201.96.
      Pallet carrier plate
      201.97.
      Bolster insert plate
      201.98.
      Aligning- and tryout press unit
      A6
      A42
      A42
      A43-46
      A47-52
      A53-57
      A58
      A58
      A58
      A59
      subject to alterations
      Notes on Guide Elements
      FIBRO Precision Sliding Guides –
      Carbonitrided Sintered Ferrite Bushes
      These guides employ bushes made from sintered ferrite of high purity with carbonitrided surface.
      Bearing surfaces are fine-ground.
      The sintered ferrite has a porosity content of 18-20 % by volume, vacuum filled with special lubricant
      FIBROLIT LD. As additional long term lubrication it is recommended to fill up the grove in the bushing
      with FIBROLIT LD 280.34, see chapter H. Even under arduous running conditions, this material can be
      relied upon for good protection against oil film rupture.
      Under no circumstances must molybdenum disulfite be added to the lubricant.
      For bearing clearance ranges, see chapter D.
      FIBRO High Precision Ball Bearing Guides
      Careful manufacture at narrowest tolerances, and exactly the right amount of preloading* result in a
      play-free guide element of exceptional performance potential.
      Our superfinished running surfaces further enhance the advantages of ball bearing guides.
      Toolmakers favour ball bearing buides because of their free movement on the bench.
      FIBRO ball bearing guides can be equipped with a choice of brass or aluminium ball cages, which have
      proved to be very successful in practice due to their ball density and stability
      Ball bearing guides with their point contact of the balls remain somewhat sensitive to shock and sus-
      tained radial loads. To some extent, generous dimensioning of pillar diameters helps to compensate
      for this inherent disadvantage.
      * Average preloading:
      4 µm on pillars from 8 to 12 mm diameter
      7– 9 µm on pillars from 15 to 16 mm diameter
      9–11 µm on pillars from 18 to 42 mm diameter
      11–13 µm on pillars from 50 to 80 mm diameter
      FIBRO Precision Roller Guides
      The profile roller cages are in linear contact with the guide bushing and guide pillar. This feature offers
      much greater capacity for radial loads in the individual roller than an identical size of ball bearing.
      The caulking of the roller bearing arrangement is implemented with the same FIBRO-specific solution
      as that used in ball cages.
      The profile rollers are arranged in a spiral formation in an axial direction. This gives each profile roller
      its own path. The roller cages are designed with a recess for a circlip conforming to DIN 471.
      The much larger contact area with the ball bearing guide permits a significant reduction in preload
      values.
      The following preload values apply to FIBRO Roller Guides:
      For static loads/low velocities,
      pillar diameters
      For Dynamic Loads/High Veloci-
      ties, pillar diameters
      up to Ø 25 = 2,5 µm up to Ø 25 = 1,5 µm
      Ø 30/32 = 3,5 µm Ø 30/32 = 2,5 µm
      Ø 40-50 = 3,5 µm Ø 40-50 = 2,5 µm
      Ø 63 = 4 µm Ø 63 = 3 µm
      FIBRO Precision Sliding Guides, bronze-coated
      consists of a steel body with bronze-coated running surface with helical oil groove and a grease nipple
      for lubrication.
      The steel body guarantees excellent resistance to breaking, even when subject to high loading
      at the edges.
      Use only pairing class
      guide pillar red = .30
      guide bush yellow = .10
      subject to alterations
      Notes on Guide Elements
      FIBRO Precision Sliding Guides –
      Carbonitrided Sintered Ferrite Bushes
      These guides employ bushes made from sintered ferrite of high purity with carbonitrided surface.
      Bearing surfaces are fine-ground.
      The sintered ferrite has a porosity content of 18-20 % by volume, vacuum filled with special lubricant
      FIBROLIT LD. As additional long term lubrication it is recommended to fill up the grove in the bushing
      with FIBROLIT LD 280.34, see chapter H. Even under arduous running conditions, this material can be
      relied upon for good protection against oil film rupture.
      Under no circumstances must molybdenum disulfite be added to the lubricant.
      For bearing clearance ranges, see chapter D.
      FIBRO High Precision Ball Bearing Guides
      Careful manufacture at narrowest tolerances, and exactly the right amount of preloading* result in a
      play-free guide element of exceptional performance potential.
      Our superfinished running surfaces further enhance the advantages of ball bearing guides.
      Toolmakers favour ball bearing buides because of their free movement on the bench.
      FIBRO ball bearing guides can be equipped with a choice of brass or aluminium ball cages, which have
      proved to be very successful in practice due to their ball density and stability
      Ball bearing guides with their point contact of the balls remain somewhat sensitive to shock and sus-
      tained radial loads. To some extent, generous dimensioning of pillar diameters helps to compensate
      for this inherent disadvantage.
      * Average preloading:
      4 µm on pillars from 8 to 12 mm diameter
      7– 9 µm on pillars from 15 to 16 mm diameter
      9–11 µm on pillars from 18 to 42 mm diameter
      11–13 µm on pillars from 50 to 80 mm diameter
      FIBRO Precision Roller Guides
      The profile roller cages are in linear contact with the guide bushing and guide pillar. This feature offers
      much greater capacity for radial loads in the individual roller than an identical size of ball bearing.
      The caulking of the roller bearing arrangement is implemented with the same FIBRO-specific solution
      as that used in ball cages.
      The profile rollers are arranged in a spiral formation in an axial direction. This gives each profile roller
      its own path. The roller cages are designed with a recess for a circlip conforming to DIN 471.
      The much larger contact area with the ball bearing guide permits a significant reduction in preload
      values.
      The following preload values apply to FIBRO Roller Guides:
      For static loads/low velocities,
      pillar diameters
      For Dynamic Loads/High Veloci-
      ties, pillar diameters
      up to Ø 25 = 2,5 µm up to Ø 25 = 1,5 µm
      Ø 30/32 = 3,5 µm Ø 30/32 = 2,5 µm
      Ø 40-50 = 3,5 µm Ø 40-50 = 2,5 µm
      Ø 63 = 4 µm Ø 63 = 3 µm
      FIBRO Precision Sliding Guides, bronze-coated
      consists of a steel body with bronze-coated running surface with helical oil groove and a grease nipple
      for lubrication.
      The steel body guarantees excellent resistance to breaking, even when subject to high loading
      at the edges.
      Use only pairing class
      guide pillar red = .30
      guide bush yellow = .10
      A7
      Cast Iron Die Sets
      Cast Iron Die Sets
      A9
      subject to alterations
      Die set DIN 9812 Type D/DG
      Guide Elements
      M
      Sintered Ferrite
      Guide Bushes
      .030
      Ball Bearing
      Guides
      .040
      Order No (part II)
      Available without or
      with shank thread
      in top bolster
      .031
      M
      .041
      b 2 c 7
      c 1 c 3
      d 3
      e
      a 2
      d 1
      f
      d 2
      c 2
      l
      r
      Section A - A
      Section B - B
      A A
      B B
      201.01.
      A10
      Order No part 1*
      Work area
      d 1 a 2 b 2 c 1 c 2 c 3 c 7 d 2 d 3 e f l r M
      201.01.063. 63 182 100 40 25 60 20 16 15 106 73 140 20 16x1,5
      201.01.080. 80 236 120 50 30 80 30 20 19 140 90 160 28 20x1,5
      201.01.100. 100 275 140 50 30 80 30 25 24 165 110 160 35 20x1,5
      201.01.125. 125 300 165 50 30 80 30 25 24 190 139 160 35 20x1,5
      201.01.160. 160 360 200 56 40 90 30 32 30 240 174 180 40 24x1,5
      201.01.180. 180 380 220 56 40 90 30 32 30 260 194 180 40 24x1,5
      201.01.200. 200 400 240 56 40 90 30 32 30 280 218 180 40 24x1,5
      201.01.250. 250 496 300 56 50 100 30 40 38 350 268 200 48 30x2
      201.01.315. 315 563 365 63 50 100 30 40 38 417 333 224 48 30x2
      *Order No Part 2 = complete guide type
      Ordering Code (example):
      Die set DIN 9812 Type D/DG =201.01.
      Work area D1 63 mm = 63.
      Type of guides FA Sintered ferrite = 3
      Shank thread ZG without = 0
      Order No =201.01. 63. 30
      201.01. Die set DIN 9812 Type D/DG
      subject to alterations
      B
      A
      B
      45°
      c 8
      c 4
      l
      c 1 c 3
      c 2 b 2
      a 2
      d 1
      e
      f
      d 3 d 2
      c 7
      Section A - A
      Section B - B
      A
      r
      201.03.
      Die set DIN 9814 Type D/DG
      Guide Elements
      Sintered Ferrite
      Guide Bushes
      Ball Bearing
      Guides
      Order No (part II)
      Available without or
      with shank thread
      in top bolster
      M
      .034 .054
      .035
      M
      .055
      Stripper Steel Steel
      A11
      Order No part 1*
      Work area
      d 1 a 2 b 2 c 1 c 2 c 3
      c 4 c 7 c 8 d 2 d 3 e f l r M
      201.03.100. 100 275 140 50 30 50 22 30 18 25 24 165 119 160 35 20x1.5
      201.03.125. 125 300 165 50 30 50 22 30 18 25 24 190 144 160 35 20x1.5
      201.03.160. 160 360 200 56 40 60 27 30 18 32 30 240 184 180 40 24x1.5
      *Order No Part 2 = complete guide type
      Ordering Code (example):
      Die set DIN 9814 Type D/DG =201.03.
      Work area D1 100 mm = 100.
      Type of guides FA Sintered ferrite = 03
      Shank thread ZG without = 4
      Order No =201.03. 100. 034
      201.03. Die set DIN 9814 Type D/DG
      subject to alterations
      Die set DIN 9816 Shape D
      Guide Elements
      Sintered Ferrite
      Guide Bushes
      Ball Bearing
      Guides
      .030 .040
      Order No (part II)
      Without shank thread
      in top bolster
      b 2 c 7
      c 1 c 2
      d
      e
      a 2
      d 1
      d 2
      l
      r
      Section A - A
      Section B - B
      A A
      B B
      d 3
      201.05.
      A12
      Order No part 1*
      Work area
      d 1 a 2 b 2 c 1 c 2 c 7 d 2 d 3 e l r
      201.05.063. 63 182 100 40 65 20 16 15 106 140 20
      201.05.080. 80 236 120 50 70 30 20 19 140 160 28
      201.05.100. 100 275 140 50 75 30 25 24 165 180 35
      201.05.125. 125 300 165 50 80 30 25 24 190 180 35
      201.05.160. 160 360 200 56 90 30 32 30 240 224 40
      201.05.200. 200 400 240 56 100 30 32 30 280 224 40
      *Order No Part 2 = complete guide type
      Ordering Code (example):
      Die set DIN 9816 Shape D =201.05.
      Work area D1 63 mm = 063.
      Type of guides FA Sintered ferrite = 030
      Order No =201.05. 063. 030
      201.05. Die set DIN 9816 Shape D
      subject to alterations
      b 2
      b 1 20
      c 1 c 2
      d 3
      d 1
      a 2
      e
      B
      A
      B
      A
      d 2
      l
      r
      Section A - A
      Section B - B
      201.07.
      Die set ~DIN 9816 Shape D
      Guide Elements
      Sintered Ferrite
      Guide Bushes
      A13
      Order No
      Work area
      d 1 a 2 b 1 b 2 c 1 c 2 d 2 d 3 e l r
      201.07.040.030 40 112 45 55 36 40 16 15 66 100 13
      201.07.063.030 63 142 68 78 40 55 16 15 90 125 14
      201.07. Die set ~DIN 9816 Shape D
      subject to alterations
      Die set DIN 9812 Shape C/CG
      Guide Elements
      M
      Sintered Ferrite
      Guide Bushes
      .030
      Ball Bearing
      Guides
      .040
      Order No (part II)
      Available without or
      with shank thread
      in top bolster
      .031
      M
      .041
      30
      c 1 c 3
      c 2
      b 2
      d 3
      a 2
      a 1
      f
      e
      B
      A
      B
      A
      d 2
      l
      b 1
      r
      Section A - A
      Section B - B
      201.11.
      A14
      Order No part 1*
      Work area
      a 1 x b 1 a 2 b 2 c 1 c 2 c 3 d 2 d 3 e f l r M
      201.11.070.050. 70 x 50 170 70 40 22 50 20 19 110 73 140 20 20x1.5
      201.11.080.063. 80 x 63 235 103 50 30 80 20 19 140 90 160 27 20x1.5
      201.11.100.063. 100 x 63 253 103 50 30 80 20 19 158 110 160 27 20x1.5
      201.11.100.080. 100 x 80 265 120 50 30 80 25 24 165 110 160 30 20x1.5
      201.11.125.080. 125 x 80 290 120 50 30 80 25 24 190 139 160 30 20x1.5
      201.11.160.080. 160 x 80 325 120 50 30 80 25 24 225 174 160 30 20x1.5
      201.11.200.080. 200 x 80 365 120 50 30 80 25 24 265 218 160 30 20x1.5
      201.11.125.100. 125 x 100 290 140 50 40 90 25 24 190 139 160 30 24x1.5
      201.11.160.100. 160 x 100 325 140 50 40 90 25 24 225 174 160 30 24x1.5
      201.11.200.100. 200 x 100 395 140 56 40 90 32 30 280 218 180 37 24x1.5
      201.11.160.125. 160 x 125 355 165 56 40 90 32 30 240 174 180 37 24x1.5
      201.11.200.125. 200 x 125 395 165 56 40 90 32 30 280 218 180 37 24x1.5
      201.11.250.125. 250 x 125 445 165 56 40 90 32 30 330 268 180 37 24x1.5
      201.11.315.125. 315 x 125 510 165 56 40 90 32 30 395 333 180 37 24x1.5
      201.11.200.160. 200 x 160 395 200 56 50 100 32 30 280 218 200 37 30x2
      201.11.250.160. 250 x 160 445 200 56 50 100 32 30 330 268 200 37 30x2
      201.11.250.200. 250 x 200 496 250 63 50 100 40 38 350 268 224 48 30x2
      201.11.315.200. 315 x 200 563 250 63 50 100 40 38 417 333 224 48 30x2
      201.11.315.250. 315 x 250 563 300 63 50 100 40 38 417 333 224 48 30x2
      *Order No Part 2 = complete guide type
      201.11. Die set DIN 9812 Shape C/CG
      subject to alterations
      45°
      c 4
      c 3
      30
      c 1
      c 2
      b 2
      d 3
      a 2
      a 1
      f
      e
      d 2
      b 1
      r
      Section A - A
      Section B - B
      B
      A
      B
      A
      l
      c 8
      201.13.
      Die set DIN 9814 Shape C/CG
      Guide Elements
      Sintered Ferrite
      Guide Bushes
      Ball Bearing
      Guides
      Order No (part II)
      Available without or
      with shank thread
      in top bolster
      M
      .034 .054
      .035
      M
      .055
      Stripper Steel Steel
      A15
      Order No part 1*
      Work area
      a 1 x b 1 a 2 b 2 c 1 c 2 c 3 c 4 c 8 d 2 d 3 e l r M
      201.13.080.063. 80 x 63 235 103 50 30 50 18 14 20 19 140 160 27 20x1.5
      201.13.100.080. 100 x 80 265 120 50 30 50 22 18 25 24 165 160 30 20x1.5
      201.13.125.100. 125 x 100 290 140 50 40 60 22 18 25 24 190 160 30 24x1.5
      201.13.160.125. 160 x 125 355 165 56 40 60 27 18 32 30 240 180 37 24x1.5
      201.13.200.160. 200 x 160 395 200 56 50 70 27 18 32 30 280 200 37 30x2
      *Order No Part 2 = complete guide type
      Ordering Code (example):
      Die set DIN 9814 Shape C/CG =201.13.
      Working area length A1 80 mm = 080.
      Working area width B1 63 mm = 063.
      Type of guides FA Sintered ferrite = 03
      Shank thread ZG without = 4
      Order No =201.13.080. 063. 034
      201.13. Die set DIN 9814 Shape C/CG
      subject to alterations
      Die set DIN 9819 Shape C/CG
      Guide Elements
      M
      Sintered Ferrite
      Guide Bushes
      .030
      Ball Bearing
      Guides
      .040
      Order No (part II)
      Available without or
      with shank thread
      in top bolster
      .031
      M
      .041
      c 2
      c 3
      e
      e 2
      f
      l
      b 2
      30
      c 1
      d 3
      a 1
      e
      A
      B
      A
      B
      a 2
      d 2
      r
      b 1
      1
      Section B - B
      Section A - A
      201.21.
      A16
      Order No part 1*
      Work area
      a 1 x b 1 a 2 b 2 c 1 c 2 c 3 d 2 d 3 e e 1 e 2 f l r M
      201.21.080.063. 80 x 63 120 103 50 30 80 20 19 80 145 121 73 160 27 20x1.5
      201.21.100.063. 100 x 63 140 103 50 30 80 20 19 100 157 121 73 160 27 20x1.5
      201.21.100.080. 100 x 80 140 120 50 30 80 25 24 100 175 144 90 160 30 20x1.5
      201.21.125.080. 125 x 80 165 120 50 30 80 25 24 125 191 144 90 160 30 20x1.5
      201.21.125.100. 125 x 100 165 140 50 40 90 25 24 125 206 164 110 160 30 24x1.5
      201.21.160.100. 160 x 100 200 140 50 40 90 25 24 160 229 164 110 160 30 24x1.5
      201.21.200.100. 200 x 100 240 140 56 40 90 32 30 200 268 179 110 180 37 24x1.5
      201.21.160.125. 160 x 125 200 165 56 40 90 32 30 160 259 204 139 180 37 24x1.5
      201.21.200.125. 200 x 125 240 165 56 40 90 32 30 200 286 204 139 180 37 24x1.5
      201.21.250.125. 250 x 125 290 165 56 40 90 32 30 250 323 204 139 180 37 24x1.5
      201.21.315.125. 315 x 125 355 165 56 40 90 32 30 315 375 204 139 180 37 24x1.5
      201.21.200.160. 200 x 160 240 200 56 50 100 32 30 200 312 240 174 200 37 30x2
      201.21.250.160. 250 x 160 290 200 56 50 100 32 30 250 346 240 174 200 37 30x2
      201.21.250.200. 250 x 200 300 250 63 50 100 40 38 250 392 302 218 224 48 30x2
      201.21.315.200. 315 x 200 365 250 63 50 100 40 38 315 436 302 218 224 48 30x2
      201.21.315.250. 315 x 250 365 300 63 50 100 40 38 315 472 352 268 224 48 30x2
      *Order No Part 2 = complete guide type
      201.21. Die set DIN 9819 Shape C/CG
      subject to alterations
      e
      e 2
      f
      l
      c 8
      c 4
      b 2
      30 2 c
      3
      c c 1
      d 3
      a 1
      e
      A
      B
      A
      B
      a 2
      d 2
      r
      b 1
      1
      Section B - B
      Section A - A
      201.23.
      Die set
      Guide Elements
      Sintered Ferrite
      Guide Bushes
      Ball Bearing
      Guides
      Order No (part II)
      Available without or
      with shank thread
      in top bolster
      M
      .034 .054
      .035
      M
      .055
      Stripper Steel Steel
      A17
      Order No part 1*
      Work area
      a 1 x b 1 a 2 b 2 c 1 c 2 c 3 c 4 c 8 d 2 d 3 e e 1 e 2 f l r M
      201.23.100.080. 100 x 80 140 120 50 30 50 22 15 25 24 100 175 144 98 160 30 20x1.5
      201.23.125.100. 125 x 100 165 140 50 40 60 22 15 25 24 125 206 164 118 160 30 24x1.5
      201.23.160.100. 160 x 100 200 140 50 40 60 22 15 25 24 160 229 164 118 160 30 24x1.5
      201.23.160.125. 160 x 125 200 165 56 40 60 27 15 32 30 160 259 204 148 180 37 24x1.5
      201.23.200.125. 200 x 125 240 165 56 40 60 27 15 32 30 200 286 204 148 180 37 24x1.5
      201.23.250.160. 250 x 160 290 200 56 50 70 27 15 32 30 250 346 240 184 200 37 30x2
      *Order No Part 2 = complete guide type
      Ordering Code (example):
      Die set =201.23.
      Working area length A1 100 mm = 100.
      Working area width B1 80 mm = 080.
      Type of guides FA Sintered ferrite = 03
      Shank thread ZG without = 4
      Order No =201.23. 100. 080. 034
      201.23. Die set
      subject to alterations
      Die set
      Guide Elements
      M
      Sintered Ferrite
      Guide Bushes
      .030
      Ball Bearing
      Guides
      .040
      Order No (part II)
      Available without or
      with shank thread
      in top bolster
      .031
      M
      .041
      e 1
      l
      30
      c 1
      3
      c
      2
      c b
      e
      a 1
      a 2
      d 3 d 2
      b 2
      1
      A
      B
      A
      B
      e 2
      f
      Section B - B
      Section A - A
      r
      201.26.
      A18
      Order No part 1*
      Work area
      a 1 x b 1 a 2 b 2 c 1 c 2 c 3 d 2 d 3 e e 1 e 2 f l r M
      201.26.125.100. 125 x 100 165 140 50 40 90 25 24 125 206 164 110 160 30 24x1.5
      201.26.160.100. 160 x 100 200 140 50 40 90 25 24 160 229 164 110 160 30 24x1.5
      201.26.160.125. 160 x 125 200 165 56 40 90 32 30 160 259 204 139 180 37 24x1.5
      201.26.200.125. 200 x 125 240 165 56 40 90 32 30 200 286 204 139 180 37 24x1.5
      201.26.200.160. 200 x 160 240 200 56 50 100 32 30 200 312 240 174 200 37 30x2
      *Order No Part 2 = complete guide type
      Ordering Code (example):
      Die set =201.26.
      Working area length A1 125 mm = 125.
      Working area width B1 100 mm = 100.
      Type of guides FA Sintered ferrite = 03
      Shank thread ZG without = 0
      Order No =201.26. 125.100. 030
      201.26. Die set
      subject to alterations
      l
      f
      3
      e
      b 1
      b 2
      30
      c 3
      a 2
      a 1
      A
      B
      A
      B
      r
      d 2 d 2
      c 1
      c 2
      Section A - A
      Section B - B
      201.31.
      e 1
      Die set DIN 9822 Shape C
      Guide Elements
      Sintered Ferrite
      Guide Bushes
      Ball Bearing
      Guides
      .030 .040
      Order No (part II)
      Without shank thread
      in top bolster
      A19
      Order No part 1*
      Work area
      a 1 x b 1 a 2 b 2 c 1 c 2 c 3 d 2 e 1 e 3 f l r
      201.31.063.050. 63 x 50 95 84 40 25 50 20 72 77 55 140 22
      201.31.080.063. 80 x 63 125 105 45 30 60 20 80 92 68 160 27
      201.31.100.063. 100 x 63 145 105 45 30 60 20 100 92 68 160 27
      201.31.100.080. 100 x 80 145 130 50 30 70 25 100 112 87 160 30
      201.31.125.080. 125 x 80 170 130 50 30 70 25 125 112 87 160 30
      201.31.160.080. 160 x 80 205 130 50 30 70 25 160 112 87 160 30
      201.31.125.100. 125 x 100 170 150 56 40 90 32 125 140 107 180 37
      201.31.160.100. 160 x 100 205 150 56 40 90 32 160 140 107 180 37
      201.31.200.100. 200 x 100 245 150 56 40 90 32 200 140 107 180 37
      201.31.160.125. 160 x 125 215 180 56 40 90 32 160 165 132 180 37
      201.31.200.125. 200 x 125 255 180 56 40 90 32 200 165 132 180 37
      201.31.250.125. 250 x 125 305 180 56 40 90 32 250 165 132 180 37
      201.31.200.160. 200 x 160 255 225 63 50 120 40 200 210 167 224 48
      201.31.250.160. 250 x 160 305 225 63 50 120 40 250 210 167 224 48
      201.31.250.200. 250 x 200 305 270 63 50 120 50 250 260 207 224 56
      201.31.315.250. 315 x 250 370 320 63 50 120 50 315 310 257 224 56
      *Order No Part 2 = complete guide type
      201.31. Die set DIN 9822 Shape C
      subject to alterations
      Die set
      Guide Elements
      Sintered Ferrite
      Guide Bushes
      Ball Bearing
      Guides
      .030 .040
      Order No (part II)
      Without shank thread
      in top bolster
      3
      c
      2
      c
      4
      c
      c 1
      20
      e 3
      b 2
      e 4
      b 1 f
      a 1
      a 2
      e
      d 2 d 2
      r
      e 4
      l
      Section B - B
      Section A - A
      A
      B
      A
      B
      201.33.
      A20
      Order No part 1*
      Work area
      a 1 x b 1 a 2 b 2 c 1 c 2 c 3 c 4 d 2 e e 3 e 4 f l r
      201.33.063.050. 63 x 50 116 110 25 25 40 45 16 72 88 74 57 125 22
      201.33.080.060. 80 x 60 116 117 25 25 40 45 20 72 95 81 62 160 22
      *Order No Part 2 = complete guide type
      Ordering Code (example):
      Die set =201.33.
      Working area length A1 63 mm = 063.
      Working area width B1 50 mm = 050.
      Type of guides FA Sintered ferrite = 030
      Order No =201.33. 063. 050. 030
      201.33. Die set
      subject to alterations
      c 2
      c 3
      c 7
      c 1
      d 1
      e 2
      e
      3
      b
      l
      2
      b
      3
      e
      d 2 d 2
      a 2
      r
      Section B - B
      Section A - A
      A
      B
      A
      B
      201.36.
      Die set
      Guide Elements
      Sintered Ferrite
      Guide Bushes
      Ball Bearing
      Guides
      .030 .040
      Order No (part II)
      Without shank thread
      in top bolster
      A21
      Order No part 1*
      Work area
      d 1 a 2 b 2 b 3 c 1 c 2 c 3 c 7 d 2 e e 2 e 3 l r
      201.36.050. 50 80 80 65 40 30 50 25 20 66 33 73 125 20
      201.36.063. 63 94 94 78 45 30 60 25 20 82 41 88 125 25
      201.36.080. 80 110 110 95 50 30 70 30 25 105 52 107 160 30
      201.36.100. 100 140 140 120 50 30 70 30 25 125 57 127 160 30
      201.36.125. 125 166 166 145 56 40 90 30 32 157 73 156 180 38
      201.36.160. 160 200 200 180 63 50 120 30 40 200 85 185 224 48
      201.36.180. 180 220 220 200 63 50 120 30 40 224 90 200 224 48
      201.36.200. 200 250 250 225 63 50 120 30 50 250 95 220 224 56
      201.36.250. 250 300 300 275 63 50 120 30 50 300 120 270 224 56
      *Order No Part 2 = complete guide type
      Ordering Code (example):
      Die set =201.36.
      Work area D1 50 mm = 050.
      Type of guides FA Sintered ferrite = 030
      Order No =201.36. 050. 030
      201.36. Die set
      subject to alterations
      Fine blanking die set
      Guide Elements
      Ball Bearing
      Guides
      c 7 c 7
      b 1 b 1
      b 2
      g
      e
      a 2
      l
      d 3 d 2
      d 1
      c 1 c 1
      Section A - A
      Section B - B
      A
      B
      A
      B
      Faces front and rear fine machined after assembly – their perfect
      alignment permits use as datum reference.
      201.39.
      1
      r
      2
      r
      A22
      Order No
      Work area
      d 1 a 2 b 1 b 2 c 1 c 7 d 2 d 3 G e l r 1 r 2
      201.39.100.040 100 220 50 85 75 22 25 24 60 140 140 27 6
      201.39.125.040 125 245 62 100 75 25 25 24 80 165 140 27 6
      201.39.160.040 160 290 80 140 75 25 32 30 80 200 140 35 6
      201.39.200.040 200 340 100 160 80 30 40 38 90 250 160 45 8
      201.39.250.040 250 400 125 200 85 32 40 38 100 300 180 50 10
      201.39. Fine blanking die set
      All-Steel- and
      Aluminium
      Die Sets
      All-Steel- and
      Aluminium
      Die Sets
      A23
      2010.?5.
      2010.?6.
      2010.?7.
      2010.?9.
      l
      3 e
      a 4
      e 2
      b 1
      e 2
      3
      b 1
      1
      b
      1
      c c 2
      c 4
      d 1
      d 1
      e 1
      a 2
      a 1
      e 4
      a 2
      a 1
      e 1
      a 2
      a 1
      e 1
      d 2
      d 2
      D
      e 2
      a 3
      a
      d 2 d 2
      d 2 d 2
      b 1
      d 2
      a 1
      e 1
      d 2
      subject to alterations
      Standard Guide Systems
      202.19.
      Headed Sintered
      Ferrite Bushes,
      carbonitrided = .834.
      Headed Ball
      Bearing Bushes = .862.
      202.19.
      2081.3?. 2081.4?.
      206.71.
      Description:
      FIBRO Die Sets offer the choice between sintered ferrite sliding guides and
      those of the ball bearing type to DIN-ISO. Both come with headed guide
      bushes. These are seated in push-fit bolster bores and retained there by
      screw clamps.
      Execution:
      Steel: External contours milled, thickness surfaces ground
      a 1 or b 1 %630 = +0,2/+0,4
      a 1 or b 1 .630 = +0,2/+0,6
      Aluminium: External contours sawed, thickness surfaces ground
      a 1 or b 1 = +1/+4
      Advisory: Ordering Code:
      Hole pattern for the screw clamps depends on positioning of working
      surface, determined by last part of the Order No,
      for example: 2010.49.2520.4.862 .1 lengthwise
       .2 across
      Note:
      On request, Standard Die Sets can also be fitted with any other FIBRO
      Guide Elements (see die sets to customers’ drawings ).
      FIBRO will furthermore supply die sets with special machining features .
      Die set without stripper ~DIN 9868/ISO 11415
      A24
      2010. □ 5.
      2010. □ 6.
      2010. □ 7.
      2010. □ 9.
      a 1 ⊗ b 1
      a 2  ⊗ b 1
      a 1  ⊗ a 3
      a 1  ⊗ a 4 c 1 ± 2 c 2 ± 2 c 4 S c 4 K d 1 /d 2 ⊗ l D e 1 e 2 e 3 e 4
      2010. .1608. 1. . 160 ⊗ 80 60 ⊗ 80 – – 32 32 20 36 19/20 ⊗ 160 39 100 – – –
      2010. .1610. 1. . 160 ⊗ 100 60 ⊗ 100 – 160 ⊗ 50 32 32 20 36 19/20 ⊗ 160 39 100 – 70 –
      2010. .1612. 1. . 160 ⊗ 125 60 ⊗ 125 – 160 ⊗ 75 32 32 20 36 19/20 ⊗ 160 39 100 – 95 –
      2010. .1616. 1. . 160 ⊗ 160 60 ⊗ 160 160 ⊗ 60 160 ⊗ 110 32 32 20 36 19/20 ⊗ 160 39 100 100 130 103
      2010. .2010. 1. . 200 ⊗ 100 70 ⊗ 100 – – 40 40 36 56 24/25 ⊗ 180 46 120 – – –
      2010. .2010. 2. . 200 ⊗ 100 70 ⊗ 100 – – 40 32 36 56 24/25 ⊗ 180 46 120 – – –
      2010. .2010. 3. . 200 ⊗ 100 70 ⊗ 100 – – 32 40 36 56 24/25 ⊗ 180 46 120 – – –
      2010. .2010. 4. . 200 ⊗ 100 70 ⊗ 100 – – 32 32 36 56 24/25 ⊗ 180 46 120 – – –
      2010. .2012. 1. . 200 ⊗ 125 70 ⊗ 125 – 200 ⊗ 60 40 40 36 56 24/25 ⊗ 180 46 120 – 85 –
      2010. .2012. 2. . 200 ⊗ 125 70 ⊗ 125 – 200 ⊗ 60 40 32 36 56 24/25 ⊗ 180 46 120 – 85 –
      2010. .2012. 3. . 200 ⊗ 125 70 ⊗ 125 – 200 ⊗ 60 32 40 36 56 24/25 ⊗ 180 46 120 – 85 –
      2010. .2012. 4. . 200 ⊗ 125 70 ⊗ 125 – 200 ⊗ 60 32 32 36 56 24/25 ⊗ 180 46 120 – 85 –
      2010. .2016. 1. . 200 ⊗ 160 70 ⊗ 160 – 200 ⊗ 95 40 40 36 56 24/25 ⊗ 180 46 120 – 120 –
      2010. .2016. 2. . 200 ⊗ 160 70 ⊗ 160 – 200 ⊗ 95 40 32 36 56 24/25 ⊗ 180 46 120 – 120 –
      2010. .2016. 3. . 200 ⊗ 160 70 ⊗ 160 – 200 ⊗ 95 32 40 36 56 24/25 ⊗ 180 46 120 – 120 –
      2010. .2016. 4. . 200 ⊗ 160 70 ⊗ 160 – 200 ⊗ 95 32 32 36 56 24/25 ⊗ 180 46 120 – 120 –
      2010. .2020. 1. . 200 ⊗ 200 70 ⊗ 200 200 ⊗ 70 200 ⊗ 135 40 40 36 56 24/25 ⊗ 180 46 120 120 160 123
      2010. .2020. 2. . 200 ⊗ 200 70 ⊗ 200 200 ⊗ 70 200 ⊗ 135 40 32 36 56 24/25 ⊗ 180 46 120 120 160 123
      2010. .2020. 3. . 200 ⊗ 200 70 ⊗ 200 200 ⊗ 70 200 ⊗ 135 32 40 36 56 24/25 ⊗ 180 46 120 120 160 123
      2010. .2020. 4. . 200 ⊗ 200 70 ⊗ 200 200 ⊗ 70 200 ⊗ 135 32 32 36 56 24/25 ⊗ 180 46 120 120 160 123
      2010. .2512. 1. . 250 ⊗ 125 120 ⊗ 125 – 250 ⊗ 60 40 40 36 56 24/25 ⊗ 180 46 170 – 85 –
      2010. .2512. 2. . 250 ⊗ 125 120 ⊗ 125 – 250 ⊗ 60 40 32 36 56 24/25 ⊗ 180 46 170 – 85 –
      2010. .2512. 3. . 250 ⊗ 125 120 ⊗ 125 – 250 ⊗ 60 32 40 36 56 24/25 ⊗ 180 46 170 – 85 –
      2010. .2512. 4. . 250 ⊗ 125 120 ⊗ 125 – 250 ⊗ 60 32 32 36 56 24/25 ⊗ 180 46 170 – 85 –
      2010. .2516. 1. . 250 ⊗ 160 120 ⊗ 160 – 250 ⊗ 95 40 40 36 56 24/25 ⊗ 180 46 170 – 120 –
      2010. .2516. 2. . 250 ⊗ 160 120 ⊗ 160 – 250 ⊗ 95 40 32 36 56 24/25 ⊗ 180 46 170 – 120 –
      2010. .2516. 3. . 250 ⊗ 160 120 ⊗ 160 – 250 ⊗ 95 32 40 36 56 24/25 ⊗ 180 46 170 – 120 –
      2010. .2516. 4. . 250 ⊗ 160 120 ⊗ 160 – 250 ⊗ 95 32 32 36 56 24/25 ⊗ 180 46 170 – 120 –
      2010. .2520. 1. . 250 ⊗ 200 120 ⊗ 200 250 ⊗ 70 250 ⊗ 135 40 40 36 56 24/25 ⊗ 180 46 170 120 160 173
      2010. .2520. 2. . 250 ⊗ 200 120 ⊗ 200 250 ⊗ 70 250 ⊗ 135 40 32 36 56 24/25 ⊗ 180 46 170 120 160 173
      2010. .2520. 3. . 250 ⊗ 200 120 ⊗ 200 250 ⊗ 70 250 ⊗ 135 32 40 36 56 24/25 ⊗ 180 46 170 120 160 173
      2010. .2520. 4. . 250 ⊗ 200 120 ⊗ 200 250 ⊗ 70 250 ⊗ 135 32 32 36 56 24/25 ⊗ 180 46 170 120 160 173
      2010. .2525. 1. . 250 ⊗ 250 120 ⊗ 250 250 ⊗ 120 250 ⊗ 185 40 40 36 56 24/25 ⊗ 180 46 170 170 210 173
      2010. .2525. 2. . 250 ⊗ 250 120 ⊗ 250 250 ⊗ 120 250 ⊗ 185 40 32 36 56 24/25 ⊗ 180 46 170 170 210 173
      2010. .2525. 3. . 250 ⊗ 250 120 ⊗ 250 250 ⊗ 120 250 ⊗ 185 32 40 36 56 24/25 ⊗ 180 46 170 170 210 173
      2010. .2525. 4. . 250 ⊗ 250 120 ⊗ 250 250 ⊗ 120 250 ⊗ 185 32 32 36 56 24/25 ⊗ 180 46 170 170 210 173
      2010. .3116. 1. . 315 ⊗ 160 165 ⊗ 160 – 315 ⊗ 85 50 50 45 63 30/32 ⊗ 200 53 225 – 115 –
      2010. .3116. 2. . 315 ⊗ 160 165 ⊗ 160 – 315 ⊗ 85 50 40 45 63 30/32 ⊗ 200 53 225 – 115 –
      2010. .3116. 3. . 315 ⊗ 160 165 ⊗ 160 – 315 ⊗ 85 40 50 45 63 30/32 ⊗ 200 53 225 – 115 –
      2010. .3116. 4. . 315 ⊗ 160 165 ⊗ 160 – 315 ⊗ 85 40 40 45 63 30/32 ⊗ 200 53 225 – 115 –
      2010. .3120. 1. . 315 ⊗ 200 165 ⊗ 200 315 ⊗ 50 315 ⊗ 125 50 50 45 63 30/32 ⊗ 200 53 225 110 155 228
      2010. .3120. 2. . 315 ⊗ 200 165 ⊗ 200 315 ⊗ 50 315 ⊗ 125 50 40 45 63 30/32 ⊗ 200 53 225 110 155 228
      2010. .3120. 3. . 315 ⊗ 200 165 ⊗ 200 315 ⊗ 50 315 ⊗ 125 40 50 45 63 30/32 ⊗ 200 53 225 110 155 228
      2010. .3120. 4. . 315 ⊗ 200 165 ⊗ 200 315 ⊗ 50 315 ⊗ 125 40 40 45 63 30/32 ⊗ 200 53 225 110 155 228
      2010. .3125. 1. . 315 ⊗ 250 165 ⊗ 250 315 ⊗ 100 315 ⊗ 175 50 50 45 63 30/32 ⊗ 200 53 225 160 205 228
      2010. .3125. 2. . 315 ⊗ 250 165 ⊗ 250 315 ⊗ 100 315 ⊗ 175 50 40 45 63 30/32 ⊗ 200 53 225 160 205 228
      2010. .3125. 3. . 315 ⊗ 250 165 ⊗ 250 315 ⊗ 100 315 ⊗ 175 40 50 45 63 30/32 ⊗ 200 53 225 160 205 228
      2010. .3125. 4. . 315 ⊗ 250 165 ⊗ 250 315 ⊗ 100 315 ⊗ 175 40 40 45 63 30/32 ⊗ 200 53 225 160 205 228
      2010. .3131. 1. . 315 ⊗ 315 165 ⊗ 315 315 ⊗ 165 315 ⊗ 240 50 50 45 63 30/32 ⊗ 200 53 225 225 270 228
      2010. .3131. 2. . 315 ⊗ 315 165 ⊗ 315 315 ⊗ 165 315 ⊗ 240 50 40 45 63 30/32 ⊗ 200 53 225 225 270 228
      2010. .3131. 3. . 315 ⊗ 315 165 ⊗ 315 315 ⊗ 165 315 ⊗ 240 40 50 45 63 30/32 ⊗ 200 53 225 225 270 228
      2010. .3131. 4. . 315 ⊗ 315 165 ⊗ 315 315 ⊗ 165 315 ⊗ 240 40 40 45 63 30/32 ⊗ 200 53 225 225 270 228
      2010. .4020. 1. . 400 ⊗ 200 250 ⊗ 200 400 ⊗ 50 400 ⊗ 125 50 50 45 63 30/32 ⊗ 200 53 310 110 155 313
      2010. .4020. 2. . 400 ⊗ 200 250 ⊗ 200 400 ⊗ 50 400 ⊗ 125 50 40 45 63 30/32 ⊗ 200 53 310 110 155 313
      2010. .4020. 3. . 400 ⊗ 200 250 ⊗ 200 400 ⊗ 50 400 ⊗ 125 40 50 45 63 30/32 ⊗ 200 53 310 110 155 313
      2010. .4020. 4. . 400 ⊗ 200 250 ⊗ 200 400 ⊗ 50 400 ⊗ 125 40 40 45 63 30/32 ⊗ 200 53 310 110 155 313
      2010. .4025. 1. . 400 ⊗ 250 250 ⊗ 250 400 ⊗ 100 400 ⊗ 175 50 50 45 63 30/32 ⊗ 200 53 310 160 205 313
      2010. .4025. 2. . 400 ⊗ 250 250 ⊗ 250 400 ⊗ 100 400 ⊗ 175 50 40 45 63 30/32 ⊗ 200 53 310 160 205 313
      2010. .4025. 3. . 400 ⊗ 250 250 ⊗ 250 400 ⊗ 100 400 ⊗ 175 40 50 45 63 30/32 ⊗ 200 53 310 160 205 313
      2010. .4025. 4. . 400 ⊗ 250 250 ⊗ 250 400 ⊗ 100 400 ⊗ 175 40 40 45 63 30/32 ⊗ 200 53 310 160 205 313
      2010. .4031. 1. . 400 u 315 250 u 315 400 u 165 400 u 240 50 50 45 63 30/32 u 200 53 310 225 270 313
      2010. .4031. 2. . 400 u 315 250 u 315 400 u 165 400 u 240 50 40 45 63 30/32 u 200 53 310 225 270 313
      2010 . 4 5 . 4025 . 1 . 862 . 2
      subject to alterations
      Die set without stripper ~DIN 9868/ISO 11415
      Type
      2010. □□ . Ordering Code (principle):
      Position of work area: 2
      Guide system: Headed ball bearing
      bushes
      Thickness combinations P:
      c 1 - c 2
      External dimensions: a 1 = 400 u b 1 = 250
      Type:
      Position of guide elements
      Material:
      4 = Steel, 6 = Aluminium
      Standard Die sets
      Order No.
      external
      dimensions
      work area
      across
      work area
      lengthwise
      work area
      lengthwise
      2010.?5.
      2010.?6.
      2010.?7.
      2010.?9.
      l
      3 e
      a 4
      e 2
      b 1
      e 2
      3
      b 1
      1
      b
      1
      c c 2
      c 4
      d 1
      d 1
      e 1
      a 2
      a 1
      e 4
      a 2
      a 1
      e 1
      a 2
      a 1
      e 1
      d 2
      d 2
      D
      e 2
      a 3
      a
      d 2 d 2
      d 2 d 2
      b 1
      d 2
      a 1
      e 1
      d 2
      subject to alterations
      Standard Guide Systems
      202.19.
      Headed Sintered
      Ferrite Bushes,
      carbonitrided = .834.
      Headed Ball
      Bearing Bushes = .862.
      202.19.
      2081.3?. 2081.4?.
      206.71.
      Description:
      FIBRO Die Sets offer the choice between sintered ferrite sliding guides and
      those of the ball bearing type to DIN-ISO. Both come with headed guide
      bushes. These are seated in push-fit bolster bores and retained there by
      screw clamps.
      Execution:
      Steel: External contours milled, thickness surfaces ground
      a 1 or b 1 %630 = +0,2/+0,4
      a 1 or b 1 .630 = +0,2/+0,6
      Aluminium: External contours sawed, thickness surfaces ground
      a 1 or b 1 = +1/+4
      Advisory: Ordering Code:
      Hole pattern for the screw clamps depends on positioning of working
      surface, determined by last part of the Order No,
      for example: 2010.49.2520.4.862 .1 lengthwise
       .2 across
      Note:
      On request, Standard Die Sets can also be fitted with any other FIBRO
      Guide Elements (see die sets to customers’ drawings ).
      FIBRO will furthermore supply die sets with special machining features .
      Die set without stripper ~DIN 9868/ISO 11415
      2010. □ 5.
      2010. □ 6.
      2010. □ 7.
      2010. □ 9.
      a 1 ⊗ b 1
      a 2  ⊗ b 1
      a 1  ⊗ a 3
      a 1  ⊗ a 4 c 1 ± 2 c 2 ± 2 c 4 S c 4 K d 1 /d 2 ⊗ l D e 1 e 2 e 3 e 4
      2010. .1608. 1. . 160 ⊗ 80 60 ⊗ 80 – – 32 32 20 36 19/20 ⊗ 160 39 100 – – –
      2010. .1610. 1. . 160 ⊗ 100 60 ⊗ 100 – 160 ⊗ 50 32 32 20 36 19/20 ⊗ 160 39 100 – 70 –
      2010. .1612. 1. . 160 ⊗ 125 60 ⊗ 125 – 160 ⊗ 75 32 32 20 36 19/20 ⊗ 160 39 100 – 95 –
      2010. .1616. 1. . 160 ⊗ 160 60 ⊗ 160 160 ⊗ 60 160 ⊗ 110 32 32 20 36 19/20 ⊗ 160 39 100 100 130 103
      2010. .2010. 1. . 200 ⊗ 100 70 ⊗ 100 – – 40 40 36 56 24/25 ⊗ 180 46 120 – – –
      2010. .2010. 2. . 200 ⊗ 100 70 ⊗ 100 – – 40 32 36 56 24/25 ⊗ 180 46 120 – – –
      2010. .2010. 3. . 200 ⊗ 100 70 ⊗ 100 – – 32 40 36 56 24/25 ⊗ 180 46 120 – – –
      2010. .2010. 4. . 200 ⊗ 100 70 ⊗ 100 – – 32 32 36 56 24/25 ⊗ 180 46 120 – – –
      2010. .2012. 1. . 200 ⊗ 125 70 ⊗ 125 – 200 ⊗ 60 40 40 36 56 24/25 ⊗ 180 46 120 – 85 –
      2010. .2012. 2. . 200 ⊗ 125 70 ⊗ 125 – 200 ⊗ 60 40 32 36 56 24/25 ⊗ 180 46 120 – 85 –
      2010. .2012. 3. . 200 ⊗ 125 70 ⊗ 125 – 200 ⊗ 60 32 40 36 56 24/25 ⊗ 180 46 120 – 85 –
      2010. .2012. 4. . 200 ⊗ 125 70 ⊗ 125 – 200 ⊗ 60 32 32 36 56 24/25 ⊗ 180 46 120 – 85 –
      2010. .2016. 1. . 200 ⊗ 160 70 ⊗ 160 – 200 ⊗ 95 40 40 36 56 24/25 ⊗ 180 46 120 – 120 –
      2010. .2016. 2. . 200 ⊗ 160 70 ⊗ 160 – 200 ⊗ 95 40 32 36 56 24/25 ⊗ 180 46 120 – 120 –
      2010. .2016. 3. . 200 ⊗ 160 70 ⊗ 160 – 200 ⊗ 95 32 40 36 56 24/25 ⊗ 180 46 120 – 120 –
      2010. .2016. 4. . 200 ⊗ 160 70 ⊗ 160 – 200 ⊗ 95 32 32 36 56 24/25 ⊗ 180 46 120 – 120 –
      2010. .2020. 1. . 200 ⊗ 200 70 ⊗ 200 200 ⊗ 70 200 ⊗ 135 40 40 36 56 24/25 ⊗ 180 46 120 120 160 123
      2010. .2020. 2. . 200 ⊗ 200 70 ⊗ 200 200 ⊗ 70 200 ⊗ 135 40 32 36 56 24/25 ⊗ 180 46 120 120 160 123
      2010. .2020. 3. . 200 ⊗ 200 70 ⊗ 200 200 ⊗ 70 200 ⊗ 135 32 40 36 56 24/25 ⊗ 180 46 120 120 160 123
      2010. .2020. 4. . 200 ⊗ 200 70 ⊗ 200 200 ⊗ 70 200 ⊗ 135 32 32 36 56 24/25 ⊗ 180 46 120 120 160 123
      2010. .2512. 1. . 250 ⊗ 125 120 ⊗ 125 – 250 ⊗ 60 40 40 36 56 24/25 ⊗ 180 46 170 – 85 –
      2010. .2512. 2. . 250 ⊗ 125 120 ⊗ 125 – 250 ⊗ 60 40 32 36 56 24/25 ⊗ 180 46 170 – 85 –
      2010. .2512. 3. . 250 ⊗ 125 120 ⊗ 125 – 250 ⊗ 60 32 40 36 56 24/25 ⊗ 180 46 170 – 85 –
      2010. .2512. 4. . 250 ⊗ 125 120 ⊗ 125 – 250 ⊗ 60 32 32 36 56 24/25 ⊗ 180 46 170 – 85 –
      2010. .2516. 1. . 250 ⊗ 160 120 ⊗ 160 – 250 ⊗ 95 40 40 36 56 24/25 ⊗ 180 46 170 – 120 –
      2010. .2516. 2. . 250 ⊗ 160 120 ⊗ 160 – 250 ⊗ 95 40 32 36 56 24/25 ⊗ 180 46 170 – 120 –
      2010. .2516. 3. . 250 ⊗ 160 120 ⊗ 160 – 250 ⊗ 95 32 40 36 56 24/25 ⊗ 180 46 170 – 120 –
      2010. .2516. 4. . 250 ⊗ 160 120 ⊗ 160 – 250 ⊗ 95 32 32 36 56 24/25 ⊗ 180 46 170 – 120 –
      2010. .2520. 1. . 250 ⊗ 200 120 ⊗ 200 250 ⊗ 70 250 ⊗ 135 40 40 36 56 24/25 ⊗ 180 46 170 120 160 173
      2010. .2520. 2. . 250 ⊗ 200 120 ⊗ 200 250 ⊗ 70 250 ⊗ 135 40 32 36 56 24/25 ⊗ 180 46 170 120 160 173
      2010. .2520. 3. . 250 ⊗ 200 120 ⊗ 200 250 ⊗ 70 250 ⊗ 135 32 40 36 56 24/25 ⊗ 180 46 170 120 160 173
      2010. .2520. 4. . 250 ⊗ 200 120 ⊗ 200 250 ⊗ 70 250 ⊗ 135 32 32 36 56 24/25 ⊗ 180 46 170 120 160 173
      2010. .2525. 1. . 250 ⊗ 250 120 ⊗ 250 250 ⊗ 120 250 ⊗ 185 40 40 36 56 24/25 ⊗ 180 46 170 170 210 173
      2010. .2525. 2. . 250 ⊗ 250 120 ⊗ 250 250 ⊗ 120 250 ⊗ 185 40 32 36 56 24/25 ⊗ 180 46 170 170 210 173
      2010. .2525. 3. . 250 ⊗ 250 120 ⊗ 250 250 ⊗ 120 250 ⊗ 185 32 40 36 56 24/25 ⊗ 180 46 170 170 210 173
      2010. .2525. 4. . 250 ⊗ 250 120 ⊗ 250 250 ⊗ 120 250 ⊗ 185 32 32 36 56 24/25 ⊗ 180 46 170 170 210 173
      2010. .3116. 1. . 315 ⊗ 160 165 ⊗ 160 – 315 ⊗ 85 50 50 45 63 30/32 ⊗ 200 53 225 – 115 –
      2010. .3116. 2. . 315 ⊗ 160 165 ⊗ 160 – 315 ⊗ 85 50 40 45 63 30/32 ⊗ 200 53 225 – 115 –
      2010. .3116. 3. . 315 ⊗ 160 165 ⊗ 160 – 315 ⊗ 85 40 50 45 63 30/32 ⊗ 200 53 225 – 115 –
      2010. .3116. 4. . 315 ⊗ 160 165 ⊗ 160 – 315 ⊗ 85 40 40 45 63 30/32 ⊗ 200 53 225 – 115 –
      2010. .3120. 1. . 315 ⊗ 200 165 ⊗ 200 315 ⊗ 50 315 ⊗ 125 50 50 45 63 30/32 ⊗ 200 53 225 110 155 228
      2010. .3120. 2. . 315 ⊗ 200 165 ⊗ 200 315 ⊗ 50 315 ⊗ 125 50 40 45 63 30/32 ⊗ 200 53 225 110 155 228
      2010. .3120. 3. . 315 ⊗ 200 165 ⊗ 200 315 ⊗ 50 315 ⊗ 125 40 50 45 63 30/32 ⊗ 200 53 225 110 155 228
      2010. .3120. 4. . 315 ⊗ 200 165 ⊗ 200 315 ⊗ 50 315 ⊗ 125 40 40 45 63 30/32 ⊗ 200 53 225 110 155 228
      2010. .3125. 1. . 315 ⊗ 250 165 ⊗ 250 315 ⊗ 100 315 ⊗ 175 50 50 45 63 30/32 ⊗ 200 53 225 160 205 228
      2010. .3125. 2. . 315 ⊗ 250 165 ⊗ 250 315 ⊗ 100 315 ⊗ 175 50 40 45 63 30/32 ⊗ 200 53 225 160 205 228
      2010. .3125. 3. . 315 ⊗ 250 165 ⊗ 250 315 ⊗ 100 315 ⊗ 175 40 50 45 63 30/32 ⊗ 200 53 225 160 205 228
      2010. .3125. 4. . 315 ⊗ 250 165 ⊗ 250 315 ⊗ 100 315 ⊗ 175 40 40 45 63 30/32 ⊗ 200 53 225 160 205 228
      2010. .3131. 1. . 315 ⊗ 315 165 ⊗ 315 315 ⊗ 165 315 ⊗ 240 50 50 45 63 30/32 ⊗ 200 53 225 225 270 228
      2010. .3131. 2. . 315 ⊗ 315 165 ⊗ 315 315 ⊗ 165 315 ⊗ 240 50 40 45 63 30/32 ⊗ 200 53 225 225 270 228
      2010. .3131. 3. . 315 ⊗ 315 165 ⊗ 315 315 ⊗ 165 315 ⊗ 240 40 50 45 63 30/32 ⊗ 200 53 225 225 270 228
      2010. .3131. 4. . 315 ⊗ 315 165 ⊗ 315 315 ⊗ 165 315 ⊗ 240 40 40 45 63 30/32 ⊗ 200 53 225 225 270 228
      2010. .4020. 1. . 400 ⊗ 200 250 ⊗ 200 400 ⊗ 50 400 ⊗ 125 50 50 45 63 30/32 ⊗ 200 53 310 110 155 313
      2010. .4020. 2. . 400 ⊗ 200 250 ⊗ 200 400 ⊗ 50 400 ⊗ 125 50 40 45 63 30/32 ⊗ 200 53 310 110 155 313
      2010. .4020. 3. . 400 ⊗ 200 250 ⊗ 200 400 ⊗ 50 400 ⊗ 125 40 50 45 63 30/32 ⊗ 200 53 310 110 155 313
      2010. .4020. 4. . 400 ⊗ 200 250 ⊗ 200 400 ⊗ 50 400 ⊗ 125 40 40 45 63 30/32 ⊗ 200 53 310 110 155 313
      2010. .4025. 1. . 400 ⊗ 250 250 ⊗ 250 400 ⊗ 100 400 ⊗ 175 50 50 45 63 30/32 ⊗ 200 53 310 160 205 313
      2010. .4025. 2. . 400 ⊗ 250 250 ⊗ 250 400 ⊗ 100 400 ⊗ 175 50 40 45 63 30/32 ⊗ 200 53 310 160 205 313
      2010. .4025. 3. . 400 ⊗ 250 250 ⊗ 250 400 ⊗ 100 400 ⊗ 175 40 50 45 63 30/32 ⊗ 200 53 310 160 205 313
      2010. .4025. 4. . 400 ⊗ 250 250 ⊗ 250 400 ⊗ 100 400 ⊗ 175 40 40 45 63 30/32 ⊗ 200 53 310 160 205 313
      2010. .4031. 1. . 400 u 315 250 u 315 400 u 165 400 u 240 50 50 45 63 30/32 u 200 53 310 225 270 313
      2010. .4031. 2. . 400 u 315 250 u 315 400 u 165 400 u 240 50 40 45 63 30/32 u 200 53 310 225 270 313
      2010 . 4 5 . 4025 . 1 . 862 . 2
      subject to alterations
      Die set without stripper ~DIN 9868/ISO 11415
      Type
      2010. □□ . Ordering Code (principle):
      Position of work area: 2
      Guide system: Headed ball bearing
      bushes
      Thickness combinations P:
      c 1 - c 2
      External dimensions: a 1 = 400 u b 1 = 250
      Type:
      Position of guide elements
      Material:
      4 = Steel, 6 = Aluminium
      Standard Die sets
      Order No.
      external
      dimensions
      work area
      across
      work area
      lengthwise
      work area
      lengthwise
      A25
      2010.?5.
      2010.?6.
      2010.?7.
      2010.?9.
      l
      3 e
      a 4
      e 2
      b 1
      e 2
      3
      b 1
      1
      b
      1
      c c 2
      c 4
      d 1
      d 1
      e 1
      a 2
      a 1
      e 4
      a 2
      a 1
      e 1
      a 2
      a 1
      e 1
      d 2
      d 2
      D
      e 2
      a 3
      a
      d 2 d 2
      d 2 d 2
      b 1
      d 2
      a 1
      e 1
      d 2
      subject to alterations
      Standard Guide Systems
      202.19.
      Headed Sintered
      Ferrite Bushes,
      carbonitrided = .834.
      Headed Ball
      Bearing Bushes = .862.
      202.19.
      2081.3?. 2081.4?.
      206.71.
      Description:
      FIBRO Die Sets offer the choice between sintered ferrite sliding guides and
      those of the ball bearing type to DIN-ISO. Both come with headed guide
      bushes. These are seated in push-fit bolster bores and retained there by
      screw clamps.
      Execution:
      Steel: External contours milled, thickness surfaces ground
      a 1 or b 1 %630 = +0,2/+0,4
      a 1 or b 1 .630 = +0,2/+0,6
      Aluminium: External contours sawed, thickness surfaces ground
      a 1 or b 1 = +1/+4
      Advisory: Ordering Code:
      Hole pattern for the screw clamps depends on positioning of working
      surface, determined by last part of the Order No,
      for example: 2010.49.2520.4.862 .1 lengthwise
       .2 across
      Note:
      On request, Standard Die Sets can also be fitted with any other FIBRO
      Guide Elements (see die sets to customers’ drawings ).
      FIBRO will furthermore supply die sets with special machining features .
      Die set without stripper ~DIN 9868/ISO 11415
      A26
      2010. □ 5.
      2010. □ 6.
      2010. □ 7.
      2010. □ 9.
      2010 . 4 5 . 4025 . 1 . 862 . 2
      a 1 ⊗ b 1 a 2  ⊗ b 1 a 1  ⊗ a 3 a 1  ⊗ a 4 c 1 ± 2 c 2 ± 2 c 4 S c 4 K d 1 /d 2 ⊗ l D e 1 e 2 e 3 e 4
      2010. .4031. 3. . 400 u 315 250 u 315 400 u 165 400 u 240 40 50 45 63 30/32 u 200 53 310 225 270 313
      2010. .4031. 4. . 400 u 315 250 u 315 400 u 165 400 u 240 40 40 45 63 30/32 u 200 53 310 225 270 313
      2010. .4040. 1. . 400 u 400 250 u 400 400 u 250 400 u 325 50 50 45 63 30/32 u 200 53 310 310 355 313
      2010. .4040. 2. . 400 u 400 250 u 400 400 u 250 400 u 325 50 40 45 63 30/32 u 200 53 310 310 355 313
      2010. .4040. 3. . 400 u 400 250 u 400 400 u 250 400 u 325 40 50 45 63 30/32 u 200 53 310 310 355 313
      2010. .4040. 4. . 400 u 400 250 u 400 400 u 250 400 u 325 40 40 45 63 30/32 u 200 53 310 310 355 313
      2010. .5025. 1. . 500 u 250 330 u 250 500 u 80 500 u 165 50 50 45 71 38/40 u 200 63 400 150 200 403
      2010. .5025. 2. . 500 u 250 330 u 250 500 u 80 500 u 165 50 40 45 71 38/40 u 200 63 400 150 200 403
      2010. .5025. 3. . 500 u 250 330 u 250 500 u 80 500 u 165 40 50 45 71 38/40 u 200 63 400 150 200 403
      2010. .5025. 4. . 500 u 250 330 u 250 500 u 80 500 u 165 40 40 45 71 38/40 u 200 63 400 150 200 403
      2010. .5031. 1. . 500 u 315 330 u 315 500 u 145 500 u 230 50 50 45 71 38/40 u 200 63 400 215 265 403
      2010. .5031. 2. . 500 u 315 330 u 315 500 u 145 500 u 230 50 40 45 71 38/40 u 200 63 400 215 265 403
      2010. .5031. 3. . 500 u 315 330 u 315 500 u 145 500 u 230 40 50 45 71 38/40 u 200 63 400 215 265 403
      2010. .5031. 4. . 500 u 315 330 u 315 500 u 145 500 u 230 40 40 45 71 38/40 u 200 63 400 215 265 403
      2010. .5040. 1. . 500 u 400 330 u 400 500 u 230 500 u 315 50 50 45 71 38/40 u 200 63 400 300 350 403
      2010. .5040. 2. . 500 u 400 330 u 400 500 u 230 500 u 315 50 40 45 71 38/40 u 200 63 400 300 350 403
      2010. .5040. 3. . 500 u 400 330 u 400 500 u 230 500 u 315 40 50 45 71 38/40 u 200 63 400 300 350 403
      2010. .5040. 4. . 500 u 400 330 u 400 500 u 230 500 u 315 40 40 45 71 38/40 u 200 63 400 300 350 403
      2010. .5050. 1. . 500 u 500 330 u 500 500 u 330 500 u 415 50 50 45 71 38/40 u 200 63 400 400 450 403
      2010. .5050. 2. . 500 u 500 330 u 500 500 u 330 500 u 415 50 40 45 71 38/40 u 200 63 400 400 450 403
      2010. .5050. 3. . 500 u 500 330 u 500 500 u 330 500 u 415 40 50 45 71 38/40 u 200 63 400 400 450 403
      2010. .5050. 4. . 500 u 500 330 u 500 500 u 330 500 u 415 40 40 45 71 38/40 u 200 63 400 400 450 403
      2010. .6331. 1. . 630 u 315 430 u 315 630 u 115 630 u 215 63 63 50 80 48/50 u 250 77 510 195 255 513
      2010. .6331. 2. . 630 u 315 430 u 315 630 u 115 630 u 215 63 50 50 80 48/50 u 250 77 510 195 255 513
      2010. .6331. 3. . 630 u 315 430 u 315 630 u 115 630 u 215 50 63 50 80 48/50 u 224 77 510 195 255 513
      2010. .6331. 4. . 630 u 315 430 u 315 630 u 115 630 u 215 50 50 50 80 48/50 u 224 77 510 195 255 513
      2010. .6340. 1. . 630 u 400 430 u 400 630 u 200 630 u 300 63 63 50 80 48/50 u 250 77 510 280 340 513
      2010. .6340. 2. . 630 u 400 430 u 400 630 u 200 630 u 300 63 50 50 80 48/50 u 250 77 510 280 340 513
      2010. .6340. 3. . 630 u 400 430 u 400 630 u 200 630 u 300 50 63 50 80 48/50 u 224 77 510 280 340 513
      2010. .6340. 4. . 630 u 400 430 u 400 630 u 200 630 u 300 50 50 50 80 48/50 u 224 77 510 280 340 513
      2010. .6350. 1. . 630 u 500 430 u 500 630 u 300 630 u 400 63 63 50 80 48/50 u 250 77 510 380 440 513
      2010. .6350. 2. . 630 u 500 430 u 500 630 u 300 630 u 400 63 50 50 80 48/50 u 250 77 510 380 440 513
      2010. .6350. 3. . 630 u 500 430 u 500 630 u 300 630 u 400 50 63 50 80 48/50 u 224 77 510 380 440 513
      2010. .6350. 4. . 630 u 500 430 u 500 630 u 300 630 u 400 50 50 50 80 48/50 u 224 77 510 380 440 513
      2010. .6363. 1. . 630 u 630 430 u 630 630 u 430 630 u 530 63 63 50 80 48/50 u 250 77 510 510 570 513
      2010. .6363. 2. . 630 u 630 430 u 630 630 u 430 630 u 530 63 50 50 80 48/50 u 250 77 510 510 570 513
      2010. .6363. 3. . 630 u 630 430 u 630 630 u 430 630 u 530 50 63 50 80 48/50 u 224 77 510 510 570 513
      2010. .6363. 4. . 630 u 630 430 u 630 630 u 430 630 u 530 50 50 50 80 48/50 u 224 77 510 510 570 513
      2010. .7140. 1. . 710 u 400 510 u 400 710 u 200 710 u 300 63 63 50 80 48/50 u 250 77 590 280 340 593
      2010. .7140. 2. . 710 u 400 510 u 400 710 u 200 710 u 300 63 50 50 80 48/50 u 250 77 590 280 340 593
      2010. .7140. 3. . 710 u 400 510 u 400 710 u 200 710 u 300 50 63 50 80 48/50 u 224 77 590 280 340 593
      2010. .7140. 4. . 710 u 400 510 u 400 710 u 200 710 u 300 50 50 50 80 48/50 u 224 77 590 280 340 593
      2010. .7150. 1. . 710 u 500 510 u 500 710 u 300 710 u 400 63 63 50 80 48/50 u 250 77 590 380 440 593
      2010. .7150. 2. . 710 u 500 510 u 500 710 u 300 710 u 400 63 50 50 80 48/50 u 250 77 590 380 440 593
      2010. .7150. 3. . 710 u 500 510 u 500 710 u 300 710 u 400 50 63 50 80 48/50 u 224 77 590 380 440 593
      2010. .7150. 4. . 710 u 500 510 u 500 710 u 300 710 u 400 50 50 50 80 48/50 u 224 77 590 380 440 593
      2010. .7163. 1. . 710 u 630 510 u 630 710 u 430 710 u 530 63 63 50 80 48/50 u 250 77 590 510 570 593
      2010. .7163. 2. . 710 u 630 510 u 630 710 u 430 710 u 530 63 50 50 80 48/50 u 250 77 590 510 570 593
      2010. .7163. 3. . 710 u 630 510 u 630 710 u 430 710 u 530 50 63 50 80 48/50 u 224 77 590 510 570 593
      2010. .7163. 4. . 710 u 630 510 u 630 710 u 430 710 u 530 50 50 50 80 48/50 u 224 77 590 510 570 593
      2010. .8040. 1. . 800 u 400 600 u 400 800 u 200 800 u 300 63 63 50 80 48/50 u 250 77 680 280 340 683
      2010. .8040. 2. . 800 u 400 600 u 400 800 u 200 800 u 300 63 50 50 80 48/50 u 250 77 680 280 340 683
      2010. .8040. 3. . 800 u 400 600 u 400 800 u 200 800 u 300 50 63 50 80 48/50 u 224 77 680 280 340 683
      2010. .8040. 4. . 800 u 400 600 u 400 800 u 200 800 u 300 50 50 50 80 48/50 u 224 77 680 280 340 683
      2010. .8050. 1. . 800 u 500 600 u 500 800 u 300 800 u 400 63 63 50 80 48/50 u 250 77 680 380 440 683
      2010. .8050. 2. . 800 u 500 600 u 500 800 u 300 800 u 400 63 50 50 80 48/50 u 250 77 680 380 440 683
      2010. .8050. 3. . 800 u 500 600 u 500 800 u 300 800 u 400 50 63 50 80 48/50 u 224 77 680 380 440 683
      2010. .8050. 4. . 800 u 500 600 u 500 800 u 300 800 u 400 50 50 50 80 48/50 u 224 77 680 380 440 683
      2010. .8063. 1. . 800 u 630 600 u 630 800 u 430 800 u 530 63 63 50 80 48/50 u 250 77 680 510 570 683
      2010. .8063. 2. . 800 u 630 600 u 630 800 u 430 800 u 530 63 50 50 80 48/50 u 250 77 680 510 570 683
      2010. .8063. 3. . 800 u 630 600 u 630 800 u 430 800 u 530 50 63 50 80 48/50 u 224 77 680 510 570 683
      2010. .8063. 4. . 800 u 630 600 u 630 800 u 430 800 u 530 50 50 50 80 48/50 u 224 77 680 510 570 683
      subject to alterations
      Die set without stripper ~DIN 9868/ISO 11415
      Type
      2010. □□ . Ordering Code (principle):
      Position of work area: 2
      Guide system: Headed ball bearing
      bushes
      Thickness combinations P:
      c 1 - c 2
      External dimensions: a 1 = 400 u b 1 = 250
      Type:
      Position of guide elements
      Material:
      4 = Steel, 6 = Aluminium
      Standard Die sets
      Order No.
      external
      dimensions
      work area
      across
      work area
      lengthwise
      work area
      lengthwise
      2010.?5.
      2010.?6.
      2010.?7.
      2010.?9.
      l
      3 e
      a 4
      e 2
      b 1
      e 2
      3
      b 1
      1
      b
      1
      c c 2
      c 4
      d 1
      d 1
      e 1
      a 2
      a 1
      e 4
      a 2
      a 1
      e 1
      a 2
      a 1
      e 1
      d 2
      d 2
      D
      e 2
      a 3
      a
      d 2 d 2
      d 2 d 2
      b 1
      d 2
      a 1
      e 1
      d 2
      subject to alterations
      Standard Guide Systems
      202.19.
      Headed Sintered
      Ferrite Bushes,
      carbonitrided = .834.
      Headed Ball
      Bearing Bushes = .862.
      202.19.
      2081.3?. 2081.4?.
      206.71.
      Description:
      FIBRO Die Sets offer the choice between sintered ferrite sliding guides and
      those of the ball bearing type to DIN-ISO. Both come with headed guide
      bushes. These are seated in push-fit bolster bores and retained there by
      screw clamps.
      Execution:
      Steel: External contours milled, thickness surfaces ground
      a 1 or b 1 %630 = +0,2/+0,4
      a 1 or b 1 .630 = +0,2/+0,6
      Aluminium: External contours sawed, thickness surfaces ground
      a 1 or b 1 = +1/+4
      Advisory: Ordering Code:
      Hole pattern for the screw clamps depends on positioning of working
      surface, determined by last part of the Order No,
      for example: 2010.49.2520.4.862 .1 lengthwise
       .2 across
      Note:
      On request, Standard Die Sets can also be fitted with any other FIBRO
      Guide Elements (see die sets to customers’ drawings ).
      FIBRO will furthermore supply die sets with special machining features .
      Die set without stripper ~DIN 9868/ISO 11415
      2010. □ 5.
      2010. □ 6.
      2010. □ 7.
      2010. □ 9.
      2010 . 4 5 . 4025 . 1 . 862 . 2
      a 1 ⊗ b 1 a 2  ⊗ b 1 a 1  ⊗ a 3 a 1  ⊗ a 4 c 1 ± 2 c 2 ± 2 c 4 S c 4 K d 1 /d 2 ⊗ l D e 1 e 2 e 3 e 4
      2010. .4031. 3. . 400 u 315 250 u 315 400 u 165 400 u 240 40 50 45 63 30/32 u 200 53 310 225 270 313
      2010. .4031. 4. . 400 u 315 250 u 315 400 u 165 400 u 240 40 40 45 63 30/32 u 200 53 310 225 270 313
      2010. .4040. 1. . 400 u 400 250 u 400 400 u 250 400 u 325 50 50 45 63 30/32 u 200 53 310 310 355 313
      2010. .4040. 2. . 400 u 400 250 u 400 400 u 250 400 u 325 50 40 45 63 30/32 u 200 53 310 310 355 313
      2010. .4040. 3. . 400 u 400 250 u 400 400 u 250 400 u 325 40 50 45 63 30/32 u 200 53 310 310 355 313
      2010. .4040. 4. . 400 u 400 250 u 400 400 u 250 400 u 325 40 40 45 63 30/32 u 200 53 310 310 355 313
      2010. .5025. 1. . 500 u 250 330 u 250 500 u 80 500 u 165 50 50 45 71 38/40 u 200 63 400 150 200 403
      2010. .5025. 2. . 500 u 250 330 u 250 500 u 80 500 u 165 50 40 45 71 38/40 u 200 63 400 150 200 403
      2010. .5025. 3. . 500 u 250 330 u 250 500 u 80 500 u 165 40 50 45 71 38/40 u 200 63 400 150 200 403
      2010. .5025. 4. . 500 u 250 330 u 250 500 u 80 500 u 165 40 40 45 71 38/40 u 200 63 400 150 200 403
      2010. .5031. 1. . 500 u 315 330 u 315 500 u 145 500 u 230 50 50 45 71 38/40 u 200 63 400 215 265 403
      2010. .5031. 2. . 500 u 315 330 u 315 500 u 145 500 u 230 50 40 45 71 38/40 u 200 63 400 215 265 403
      2010. .5031. 3. . 500 u 315 330 u 315 500 u 145 500 u 230 40 50 45 71 38/40 u 200 63 400 215 265 403
      2010. .5031. 4. . 500 u 315 330 u 315 500 u 145 500 u 230 40 40 45 71 38/40 u 200 63 400 215 265 403
      2010. .5040. 1. . 500 u 400 330 u 400 500 u 230 500 u 315 50 50 45 71 38/40 u 200 63 400 300 350 403
      2010. .5040. 2. . 500 u 400 330 u 400 500 u 230 500 u 315 50 40 45 71 38/40 u 200 63 400 300 350 403
      2010. .5040. 3. . 500 u 400 330 u 400 500 u 230 500 u 315 40 50 45 71 38/40 u 200 63 400 300 350 403
      2010. .5040. 4. . 500 u 400 330 u 400 500 u 230 500 u 315 40 40 45 71 38/40 u 200 63 400 300 350 403
      2010. .5050. 1. . 500 u 500 330 u 500 500 u 330 500 u 415 50 50 45 71 38/40 u 200 63 400 400 450 403
      2010. .5050. 2. . 500 u 500 330 u 500 500 u 330 500 u 415 50 40 45 71 38/40 u 200 63 400 400 450 403
      2010. .5050. 3. . 500 u 500 330 u 500 500 u 330 500 u 415 40 50 45 71 38/40 u 200 63 400 400 450 403
      2010. .5050. 4. . 500 u 500 330 u 500 500 u 330 500 u 415 40 40 45 71 38/40 u 200 63 400 400 450 403
      2010. .6331. 1. . 630 u 315 430 u 315 630 u 115 630 u 215 63 63 50 80 48/50 u 250 77 510 195 255 513
      2010. .6331. 2. . 630 u 315 430 u 315 630 u 115 630 u 215 63 50 50 80 48/50 u 250 77 510 195 255 513
      2010. .6331. 3. . 630 u 315 430 u 315 630 u 115 630 u 215 50 63 50 80 48/50 u 224 77 510 195 255 513
      2010. .6331. 4. . 630 u 315 430 u 315 630 u 115 630 u 215 50 50 50 80 48/50 u 224 77 510 195 255 513
      2010. .6340. 1. . 630 u 400 430 u 400 630 u 200 630 u 300 63 63 50 80 48/50 u 250 77 510 280 340 513
      2010. .6340. 2. . 630 u 400 430 u 400 630 u 200 630 u 300 63 50 50 80 48/50 u 250 77 510 280 340 513
      2010. .6340. 3. . 630 u 400 430 u 400 630 u 200 630 u 300 50 63 50 80 48/50 u 224 77 510 280 340 513
      2010. .6340. 4. . 630 u 400 430 u 400 630 u 200 630 u 300 50 50 50 80 48/50 u 224 77 510 280 340 513
      2010. .6350. 1. . 630 u 500 430 u 500 630 u 300 630 u 400 63 63 50 80 48/50 u 250 77 510 380 440 513
      2010. .6350. 2. . 630 u 500 430 u 500 630 u 300 630 u 400 63 50 50 80 48/50 u 250 77 510 380 440 513
      2010. .6350. 3. . 630 u 500 430 u 500 630 u 300 630 u 400 50 63 50 80 48/50 u 224 77 510 380 440 513
      2010. .6350. 4. . 630 u 500 430 u 500 630 u 300 630 u 400 50 50 50 80 48/50 u 224 77 510 380 440 513
      2010. .6363. 1. . 630 u 630 430 u 630 630 u 430 630 u 530 63 63 50 80 48/50 u 250 77 510 510 570 513
      2010. .6363. 2. . 630 u 630 430 u 630 630 u 430 630 u 530 63 50 50 80 48/50 u 250 77 510 510 570 513
      2010. .6363. 3. . 630 u 630 430 u 630 630 u 430 630 u 530 50 63 50 80 48/50 u 224 77 510 510 570 513
      2010. .6363. 4. . 630 u 630 430 u 630 630 u 430 630 u 530 50 50 50 80 48/50 u 224 77 510 510 570 513
      2010. .7140. 1. . 710 u 400 510 u 400 710 u 200 710 u 300 63 63 50 80 48/50 u 250 77 590 280 340 593
      2010. .7140. 2. . 710 u 400 510 u 400 710 u 200 710 u 300 63 50 50 80 48/50 u 250 77 590 280 340 593
      2010. .7140. 3. . 710 u 400 510 u 400 710 u 200 710 u 300 50 63 50 80 48/50 u 224 77 590 280 340 593
      2010. .7140. 4. . 710 u 400 510 u 400 710 u 200 710 u 300 50 50 50 80 48/50 u 224 77 590 280 340 593
      2010. .7150. 1. . 710 u 500 510 u 500 710 u 300 710 u 400 63 63 50 80 48/50 u 250 77 590 380 440 593
      2010. .7150. 2. . 710 u 500 510 u 500 710 u 300 710 u 400 63 50 50 80 48/50 u 250 77 590 380 440 593
      2010. .7150. 3. . 710 u 500 510 u 500 710 u 300 710 u 400 50 63 50 80 48/50 u 224 77 590 380 440 593
      2010. .7150. 4. . 710 u 500 510 u 500 710 u 300 710 u 400 50 50 50 80 48/50 u 224 77 590 380 440 593
      2010. .7163. 1. . 710 u 630 510 u 630 710 u 430 710 u 530 63 63 50 80 48/50 u 250 77 590 510 570 593
      2010. .7163. 2. . 710 u 630 510 u 630 710 u 430 710 u 530 63 50 50 80 48/50 u 250 77 590 510 570 593
      2010. .7163. 3. . 710 u 630 510 u 630 710 u 430 710 u 530 50 63 50 80 48/50 u 224 77 590 510 570 593
      2010. .7163. 4. . 710 u 630 510 u 630 710 u 430 710 u 530 50 50 50 80 48/50 u 224 77 590 510 570 593
      2010. .8040. 1. . 800 u 400 600 u 400 800 u 200 800 u 300 63 63 50 80 48/50 u 250 77 680 280 340 683
      2010. .8040. 2. . 800 u 400 600 u 400 800 u 200 800 u 300 63 50 50 80 48/50 u 250 77 680 280 340 683
      2010. .8040. 3. . 800 u 400 600 u 400 800 u 200 800 u 300 50 63 50 80 48/50 u 224 77 680 280 340 683
      2010. .8040. 4. . 800 u 400 600 u 400 800 u 200 800 u 300 50 50 50 80 48/50 u 224 77 680 280 340 683
      2010. .8050. 1. . 800 u 500 600 u 500 800 u 300 800 u 400 63 63 50 80 48/50 u 250 77 680 380 440 683
      2010. .8050. 2. . 800 u 500 600 u 500 800 u 300 800 u 400 63 50 50 80 48/50 u 250 77 680 380 440 683
      2010. .8050. 3. . 800 u 500 600 u 500 800 u 300 800 u 400 50 63 50 80 48/50 u 224 77 680 380 440 683
      2010. .8050. 4. . 800 u 500 600 u 500 800 u 300 800 u 400 50 50 50 80 48/50 u 224 77 680 380 440 683
      2010. .8063. 1. . 800 u 630 600 u 630 800 u 430 800 u 530 63 63 50 80 48/50 u 250 77 680 510 570 683
      2010. .8063. 2. . 800 u 630 600 u 630 800 u 430 800 u 530 63 50 50 80 48/50 u 250 77 680 510 570 683
      2010. .8063. 3. . 800 u 630 600 u 630 800 u 430 800 u 530 50 63 50 80 48/50 u 224 77 680 510 570 683
      2010. .8063. 4. . 800 u 630 600 u 630 800 u 430 800 u 530 50 50 50 80 48/50 u 224 77 680 510 570 683
      subject to alterations
      Die set without stripper ~DIN 9868/ISO 11415
      Type
      2010. □□ . Ordering Code (principle):
      Position of work area: 2
      Guide system: Headed ball bearing
      bushes
      Thickness combinations P:
      c 1 - c 2
      External dimensions: a 1 = 400 u b 1 = 250
      Type:
      Position of guide elements
      Material:
      4 = Steel, 6 = Aluminium
      Standard Die sets
      Order No.
      external
      dimensions
      work area
      across
      work area
      lengthwise
      work area
      lengthwise
      A27
      2010.?5.
      2010.?6.
      2010.?9.
      e 2
      b 1
      e 2
      3
      b 1
      1
      b
      3
      c
      1
      c
      c 5
      c 2
      c 4
      l
      d 1
      d 1
      e 1
      a 2
      a 1
      e 4
      a 2
      a 1
      e 1
      a 2
      a 1
      e 1
      d 2
      d 2
      D
      e 2
      a 3
      a
      d 2 d 2
      d 2 d 2
      subject to alterations
      Standard Guide Systems
      Headed Sintered
      Ferrite Bushes,
      carbonitrided = .835.
      Headed Ball
      Bearing Bushes = .865.
      2081.3?.
      202.19.
      2081.3?.
      2081.4?.
      202.19.
      2081.4?.
      206.71.
      206.71.
      Die set with stripper ~DIN 9868/ISO 11415
      Description:
      FIBRO Die Sets offer the choice between sintered ferrite sliding guides and
      those of the ball bearing type to DIN-ISO. Both come with headed guide
      bushes. These are seated in push-fit bolster bores and retained there by
      screw clamps.
      Execution:
      Steel: External contours milled, thickness surfaces ground
      a 1 or b 1 %630 = +0,2/+0,4
      a 1 or b 1 .630 = +0,2/+0,6
      Aluminium: External contours sawed, thickness surfaces ground
      a 1 or b 1 = +1/+4
      Advisory: Ordering Code:
      Hole pattern for the screw clamps depends on positioning of working
      surface, determined by last part of the Order No,
      for example: 2010.49.2520.4.865 .1 lengthwise
       .2 across
      Note:
      On request, Standard Die Sets can also be fitted with any other FIBRO
      Guide Elements (see die sets to customers’ drawings ).
      FIBRO will furthermore supply die sets with special machining features .
      A28
      a 1 ⊗ b 1 a 2  ⊗ b 1 a 1  ⊗ a 3 c 1 ± 2 c 2 ± 2 c 3 ± 2 c 4 c 5 d 1 /d 2 u l D e 1 e 2 e 4
      2010. .1608. 1. . 160 u 80 60 u 80 – 32 32 25 12 12 19/20 u 180 39 100 – –
      2010. .1610. 1. . 160 u 100 60 u 100 – 32 32 25 12 12 19/20 u 180 39 100 – –
      2010. .1612. 1. . 160 u 125 60 u 125 – 32 32 25 12 12 19/20 u 180 39 100 – –
      2010. .1616. 1. . 160 u 160 60 u 160 160 u 60 32 32 25 12 12 19/20 u 180 39 100 100 103
      2010. .2010. 1. . 200 u 100 70 u 100 – 40 40 25 25 12 24/25 u 200 46 120 – –
      2010. .2010. 2. . 200 u 100 70 u 100 – 40 32 25 25 12 24/25 u 200 46 120 – –
      2010. .2010. 3. . 200 u 100 70 u 100 – 32 40 25 25 12 24/25 u 200 46 120 – –
      2010. .2010. 4. . 200 u 100 70 u 100 – 32 32 25 25 12 24/25 u 200 46 120 – –
      2010. .2012. 1. . 200 u 125 70 u 125 – 40 40 25 25 12 24/25 u 200 46 120 – –
      2010. .2012. 2. . 200 u 125 70 u 125 – 40 32 25 25 12 24/25 u 200 46 120 – –
      2010. .2012. 3. . 200 u 125 70 u 125 – 32 40 25 25 12 24/25 u 200 46 120 – –
      2010. .2012. 4. . 200 u 125 70 u 125 – 32 32 25 25 12 24/25 u 200 46 120 – –
      2010. .2016. 1. . 200 u 160 70 u 160 – 40 40 25 25 12 24/25 u 200 46 120 – –
      2010. .2016. 2. . 200 u 160 70 u 160 – 40 32 25 25 12 24/25 u 200 46 120 – –
      2010. .2016. 3. . 200 u 160 70 u 160 – 32 40 25 25 12 24/25 u 200 46 120 – –
      2010. .2016. 4. . 200 u 160 70 u 160 – 32 32 25 25 12 24/25 u 200 46 120 – –
      2010. .2020. 1. . 200 u 200 70 u 200 200 u 70 40 40 25 25 12 24/25 u 200 46 120 120 123
      2010. .2020. 2. . 200 u 200 70 u 200 200 u 70 40 32 25 25 12 24/25 u 200 46 120 120 123
      2010. .2020. 3. . 200 u 200 70 u 200 200 u 70 32 40 25 25 12 24/25 u 200 46 120 120 123
      2010. .2020. 4. . 200 u 200 70 u 200 200 u 70 32 32 25 25 12 24/25 u 200 46 120 120 123
      2010. .2512. 1. . 250 u 125 120 u 125 – 40 40 25 25 12 24/25 u 200 46 170 – –
      2010. .2512. 2. . 250 u 125 120 u 125 – 40 32 25 25 12 24/25 u 200 46 170 – –
      2010. .2512. 3. . 250 u 125 120 u 125 – 32 40 25 25 12 24/25 u 200 46 170 – –
      2010. .2512. 4. . 250 u 125 120 u 125 – 32 32 25 25 12 24/25 u 200 46 170 – –
      2010. .2516. 1. . 250 u 160 120 u 160 – 40 40 25 25 12 24/25 u 200 46 170 – –
      2010. .2516. 2. . 250 u 160 120 u 160 – 40 32 25 25 12 24/25 u 200 46 170 – –
      2010. .2516. 3. . 250 u 160 120 u 160 – 32 40 25 25 12 24/25 u 200 46 170 – –
      2010. .2516. 4. . 250 u 160 120 u 160 – 32 32 25 25 12 24/25 u 200 46 170 – –
      2010. .2520. 1. . 250 u 200 120 u 200 250 u 70 40 40 25 25 12 24/25 u 200 46 170 120 173
      2010. .2520. 2. . 250 u 200 120 u 200 250 u 70 40 32 25 25 12 24/25 u 200 46 170 120 173
      2010. .2520. 3. . 250 u 200 120 u 200 250 u 70 32 40 25 25 12 24/25 u 200 46 170 120 173
      2010. .2520. 4. . 250 u 200 120 u 200 250 u 70 32 32 25 25 12 24/25 u 200 46 170 120 173
      2010. .2525. 1. . 250 u 250 120 u 250 250 u 120 40 40 25 25 12 24/25 u 200 46 170 170 173
      2010. .2525. 2. . 250 u 250 120 u 250 250 u 120 40 32 25 25 12 24/25 u 200 46 170 170 173
      2010. .2525. 3. . 250 u 250 120 u 250 250 u 120 32 40 25 25 12 24/25 u 200 46 170 170 173
      2010. .2525. 4. . 250 u 250 120 u 250 250 u 120 32 32 25 25 12 24/25 u 200 46 170 170 173
      2010. .3116. 1. . 315 u 160 165 u 160 – 50 50 32 32 12 30/32 u 224 53 225 – –
      2010. .3116. 2. . 315 u 160 165 u 160 – 50 40 32 32 12 30/32 u 224 53 225 – –
      2010. .3116. 3. . 315 u 160 165 u 160 – 40 50 32 32 12 30/32 u 224 53 225 – –
      2010. .3116. 4. . 315 u 160 165 u 160 – 40 40 32 32 12 30/32 u 224 53 225 – –
      2010. .3120. 1. . 315 u 200 165 u 200 315 u 50 50 50 32 32 12 30/32 u 224 53 225 110 228
      2010. .3120. 2. . 315 u 200 165 u 200 315 u 50 50 40 32 32 12 30/32 u 224 53 225 110 228
      2010. .3120. 3. . 315 u 200 165 u 200 315 u 50 40 50 32 32 12 30/32 u 224 53 225 110 228
      2010. .3120. 4. . 315 u 200 165 u 200 315 u 50 40 40 32 32 12 30/32 u 224 53 225 110 228
      2010. .3125. 1. . 315 u 250 165 u 250 315 u 100 50 50 32 32 12 30/32 u 224 53 225 160 228
      2010. .3125. 2. . 315 u 250 165 u 250 315 u 100 50 40 32 32 12 30/32 u 224 53 225 160 228
      2010. .3125. 3. . 315 u 250 165 u 250 315 u 100 40 50 32 32 12 30/32 u 224 53 225 160 228
      2010. .3125. 4. . 315 u 250 165 u 250 315 u 100 40 40 32 32 12 30/32 u 224 53 225 160 228
      2010. .3131. 1. . 315 u 315 165 u 315 315 u 165 50 50 32 32 12 30/32 u 224 53 225 225 228
      2010. .3131. 2. . 315 u 315 165 u 315 315 u 165 50 40 32 32 12 30/32 u 224 53 225 225 228
      2010. .3131. 3. . 315 u 315 165 u 315 315 u 165 40 50 32 32 12 30/32 u 224 53 225 225 228
      2010. .3131. 4. . 315 u 315 165 u 315 315 u 165 40 40 32 32 12 30/32 u 224 53 225 225 228
      2010. .4020. 1. . 400 u 200 250 u 200 400 u 50 50 50 32 32 12 30/32 u 224 53 310 110 313
      2010. .4020. 2. . 400 u 200 250 u 200 400 u 50 50 40 32 32 12 30/32 u 224 53 310 110 313
      2010. .4020. 3. . 400 u 200 250 u 200 400 u 50 40 50 32 32 12 30/32 u 224 53 310 110 313
      2010. .4020. 4. . 400 u 200 250 u 200 400 u 50 40 40 32 32 12 30/32 u 224 53 310 110 313
      2010. .4025. 1. . 400 u 250 250 u 250 400 u 100 50 50 32 32 12 30/32 u 224 53 310 160 313
      2010. .4025. 2. . 400 u 250 250 u 250 400 u 100 50 40 32 32 12 30/32 u 224 53 310 160 313
      2010. .4025. 3. . 400 u 250 250 u 250 400 u 100 40 50 32 32 12 30/32 u 224 53 310 160 313
      2010. .4025. 4. . 400 u 250 250 u 250 400 u 100 40 40 32 32 12 30/32 u 224 53 310 160 313
      2010. .4031. 1. . 400 u 315 250 u 315 400 u 165 50 50 32 32 12 30/32 u 224 53 310 225 313
      2010. .4031. 2. . 400 u 315 250 u 315 400 u 165 50 40 32 32 12 30/32 u 224 53 310 225 313
      2010.□5.
      2010.□6.
      2010.□9.
      2010 . 4 5 . 4025 . 1 . 835 . 2
      subject to alterations
      Order No.
      external
      dimensions
      work area
      across
      work area
      lengthwise
      Die set with stripper ~DIN 9868/ISO 11415
      Type
      2010. □□ . Ordering Code (principle):
      Position of work area: 2
      Guide system: Headed guide bushes,
      ferrite
      Thickness combinations P:
      c 1 - c 2
      External dimensions: a 1 = 400 u b 1 = 250
      Type:
      Position of guide elements
      Material:
      4 = Steel, 6 = Aluminium
      Standard Die sets
      2010.?5.
      2010.?6.
      2010.?9.
      e 2
      b 1
      e 2
      3
      b 1
      1
      b
      3
      c
      1
      c
      c 5
      c 2
      c 4
      l
      d 1
      d 1
      e 1
      a 2
      a 1
      e 4
      a 2
      a 1
      e 1
      a 2
      a 1
      e 1
      d 2
      d 2
      D
      e 2
      a 3
      a
      d 2 d 2
      d 2 d 2
      subject to alterations
      Standard Guide Systems
      Headed Sintered
      Ferrite Bushes,
      carbonitrided = .835.
      Headed Ball
      Bearing Bushes = .865.
      2081.3?.
      202.19.
      2081.3?.
      2081.4?.
      202.19.
      2081.4?.
      206.71.
      206.71.
      Die set with stripper ~DIN 9868/ISO 11415
      Description:
      FIBRO Die Sets offer the choice between sintered ferrite sliding guides and
      those of the ball bearing type to DIN-ISO. Both come with headed guide
      bushes. These are seated in push-fit bolster bores and retained there by
      screw clamps.
      Execution:
      Steel: External contours milled, thickness surfaces ground
      a 1 or b 1 %630 = +0,2/+0,4
      a 1 or b 1 .630 = +0,2/+0,6
      Aluminium: External contours sawed, thickness surfaces ground
      a 1 or b 1 = +1/+4
      Advisory: Ordering Code:
      Hole pattern for the screw clamps depends on positioning of working
      surface, determined by last part of the Order No,
      for example: 2010.49.2520.4.865 .1 lengthwise
       .2 across
      Note:
      On request, Standard Die Sets can also be fitted with any other FIBRO
      Guide Elements (see die sets to customers’ drawings ).
      FIBRO will furthermore supply die sets with special machining features .
      a 1 ⊗ b 1 a 2  ⊗ b 1 a 1  ⊗ a 3 c 1 ± 2 c 2 ± 2 c 3 ± 2 c 4 c 5 d 1 /d 2 u l D e 1 e 2 e 4
      2010. .1608. 1. . 160 u 80 60 u 80 – 32 32 25 12 12 19/20 u 180 39 100 – –
      2010. .1610. 1. . 160 u 100 60 u 100 – 32 32 25 12 12 19/20 u 180 39 100 – –
      2010. .1612. 1. . 160 u 125 60 u 125 – 32 32 25 12 12 19/20 u 180 39 100 – –
      2010. .1616. 1. . 160 u 160 60 u 160 160 u 60 32 32 25 12 12 19/20 u 180 39 100 100 103
      2010. .2010. 1. . 200 u 100 70 u 100 – 40 40 25 25 12 24/25 u 200 46 120 – –
      2010. .2010. 2. . 200 u 100 70 u 100 – 40 32 25 25 12 24/25 u 200 46 120 – –
      2010. .2010. 3. . 200 u 100 70 u 100 – 32 40 25 25 12 24/25 u 200 46 120 – –
      2010. .2010. 4. . 200 u 100 70 u 100 – 32 32 25 25 12 24/25 u 200 46 120 – –
      2010. .2012. 1. . 200 u 125 70 u 125 – 40 40 25 25 12 24/25 u 200 46 120 – –
      2010. .2012. 2. . 200 u 125 70 u 125 – 40 32 25 25 12 24/25 u 200 46 120 – –
      2010. .2012. 3. . 200 u 125 70 u 125 – 32 40 25 25 12 24/25 u 200 46 120 – –
      2010. .2012. 4. . 200 u 125 70 u 125 – 32 32 25 25 12 24/25 u 200 46 120 – –
      2010. .2016. 1. . 200 u 160 70 u 160 – 40 40 25 25 12 24/25 u 200 46 120 – –
      2010. .2016. 2. . 200 u 160 70 u 160 – 40 32 25 25 12 24/25 u 200 46 120 – –
      2010. .2016. 3. . 200 u 160 70 u 160 – 32 40 25 25 12 24/25 u 200 46 120 – –
      2010. .2016. 4. . 200 u 160 70 u 160 – 32 32 25 25 12 24/25 u 200 46 120 – –
      2010. .2020. 1. . 200 u 200 70 u 200 200 u 70 40 40 25 25 12 24/25 u 200 46 120 120 123
      2010. .2020. 2. . 200 u 200 70 u 200 200 u 70 40 32 25 25 12 24/25 u 200 46 120 120 123
      2010. .2020. 3. . 200 u 200 70 u 200 200 u 70 32 40 25 25 12 24/25 u 200 46 120 120 123
      2010. .2020. 4. . 200 u 200 70 u 200 200 u 70 32 32 25 25 12 24/25 u 200 46 120 120 123
      2010. .2512. 1. . 250 u 125 120 u 125 – 40 40 25 25 12 24/25 u 200 46 170 – –
      2010. .2512. 2. . 250 u 125 120 u 125 – 40 32 25 25 12 24/25 u 200 46 170 – –
      2010. .2512. 3. . 250 u 125 120 u 125 – 32 40 25 25 12 24/25 u 200 46 170 – –
      2010. .2512. 4. . 250 u 125 120 u 125 – 32 32 25 25 12 24/25 u 200 46 170 – –
      2010. .2516. 1. . 250 u 160 120 u 160 – 40 40 25 25 12 24/25 u 200 46 170 – –
      2010. .2516. 2. . 250 u 160 120 u 160 – 40 32 25 25 12 24/25 u 200 46 170 – –
      2010. .2516. 3. . 250 u 160 120 u 160 – 32 40 25 25 12 24/25 u 200 46 170 – –
      2010. .2516. 4. . 250 u 160 120 u 160 – 32 32 25 25 12 24/25 u 200 46 170 – –
      2010. .2520. 1. . 250 u 200 120 u 200 250 u 70 40 40 25 25 12 24/25 u 200 46 170 120 173
      2010. .2520. 2. . 250 u 200 120 u 200 250 u 70 40 32 25 25 12 24/25 u 200 46 170 120 173
      2010. .2520. 3. . 250 u 200 120 u 200 250 u 70 32 40 25 25 12 24/25 u 200 46 170 120 173
      2010. .2520. 4. . 250 u 200 120 u 200 250 u 70 32 32 25 25 12 24/25 u 200 46 170 120 173
      2010. .2525. 1. . 250 u 250 120 u 250 250 u 120 40 40 25 25 12 24/25 u 200 46 170 170 173
      2010. .2525. 2. . 250 u 250 120 u 250 250 u 120 40 32 25 25 12 24/25 u 200 46 170 170 173
      2010. .2525. 3. . 250 u 250 120 u 250 250 u 120 32 40 25 25 12 24/25 u 200 46 170 170 173
      2010. .2525. 4. . 250 u 250 120 u 250 250 u 120 32 32 25 25 12 24/25 u 200 46 170 170 173
      2010. .3116. 1. . 315 u 160 165 u 160 – 50 50 32 32 12 30/32 u 224 53 225 – –
      2010. .3116. 2. . 315 u 160 165 u 160 – 50 40 32 32 12 30/32 u 224 53 225 – –
      2010. .3116. 3. . 315 u 160 165 u 160 – 40 50 32 32 12 30/32 u 224 53 225 – –
      2010. .3116. 4. . 315 u 160 165 u 160 – 40 40 32 32 12 30/32 u 224 53 225 – –
      2010. .3120. 1. . 315 u 200 165 u 200 315 u 50 50 50 32 32 12 30/32 u 224 53 225 110 228
      2010. .3120. 2. . 315 u 200 165 u 200 315 u 50 50 40 32 32 12 30/32 u 224 53 225 110 228
      2010. .3120. 3. . 315 u 200 165 u 200 315 u 50 40 50 32 32 12 30/32 u 224 53 225 110 228
      2010. .3120. 4. . 315 u 200 165 u 200 315 u 50 40 40 32 32 12 30/32 u 224 53 225 110 228
      2010. .3125. 1. . 315 u 250 165 u 250 315 u 100 50 50 32 32 12 30/32 u 224 53 225 160 228
      2010. .3125. 2. . 315 u 250 165 u 250 315 u 100 50 40 32 32 12 30/32 u 224 53 225 160 228
      2010. .3125. 3. . 315 u 250 165 u 250 315 u 100 40 50 32 32 12 30/32 u 224 53 225 160 228
      2010. .3125. 4. . 315 u 250 165 u 250 315 u 100 40 40 32 32 12 30/32 u 224 53 225 160 228
      2010. .3131. 1. . 315 u 315 165 u 315 315 u 165 50 50 32 32 12 30/32 u 224 53 225 225 228
      2010. .3131. 2. . 315 u 315 165 u 315 315 u 165 50 40 32 32 12 30/32 u 224 53 225 225 228
      2010. .3131. 3. . 315 u 315 165 u 315 315 u 165 40 50 32 32 12 30/32 u 224 53 225 225 228
      2010. .3131. 4. . 315 u 315 165 u 315 315 u 165 40 40 32 32 12 30/32 u 224 53 225 225 228
      2010. .4020. 1. . 400 u 200 250 u 200 400 u 50 50 50 32 32 12 30/32 u 224 53 310 110 313
      2010. .4020. 2. . 400 u 200 250 u 200 400 u 50 50 40 32 32 12 30/32 u 224 53 310 110 313
      2010. .4020. 3. . 400 u 200 250 u 200 400 u 50 40 50 32 32 12 30/32 u 224 53 310 110 313
      2010. .4020. 4. . 400 u 200 250 u 200 400 u 50 40 40 32 32 12 30/32 u 224 53 310 110 313
      2010. .4025. 1. . 400 u 250 250 u 250 400 u 100 50 50 32 32 12 30/32 u 224 53 310 160 313
      2010. .4025. 2. . 400 u 250 250 u 250 400 u 100 50 40 32 32 12 30/32 u 224 53 310 160 313
      2010. .4025. 3. . 400 u 250 250 u 250 400 u 100 40 50 32 32 12 30/32 u 224 53 310 160 313
      2010. .4025. 4. . 400 u 250 250 u 250 400 u 100 40 40 32 32 12 30/32 u 224 53 310 160 313
      2010. .4031. 1. . 400 u 315 250 u 315 400 u 165 50 50 32 32 12 30/32 u 224 53 310 225 313
      2010. .4031. 2. . 400 u 315 250 u 315 400 u 165 50 40 32 32 12 30/32 u 224 53 310 225 313
      2010.□5.
      2010.□6.
      2010.□9.
      2010 . 4 5 . 4025 . 1 . 835 . 2
      subject to alterations
      Order No.
      external
      dimensions
      work area
      across
      work area
      lengthwise
      Die set with stripper ~DIN 9868/ISO 11415
      Type
      2010. □□ . Ordering Code (principle):
      Position of work area: 2
      Guide system: Headed guide bushes,
      ferrite
      Thickness combinations P:
      c 1 - c 2
      External dimensions: a 1 = 400 u b 1 = 250
      Type:
      Position of guide elements
      Material:
      4 = Steel, 6 = Aluminium
      Standard Die sets
      A29
      2010.?5.
      2010.?6.
      2010.?9.
      e 2
      b 1
      e 2
      3
      b 1
      1
      b
      3
      c
      1
      c
      c 5
      c 2
      c 4
      l
      d 1
      d 1
      e 1
      a 2
      a 1
      e 4
      a 2
      a 1
      e 1
      a 2
      a 1
      e 1
      d 2
      d 2
      D
      e 2
      a 3
      a
      d 2 d 2
      d 2 d 2
      subject to alterations
      Standard Guide Systems
      Headed Sintered
      Ferrite Bushes,
      carbonitrided = .835.
      Headed Ball
      Bearing Bushes = .865.
      2081.3?.
      202.19.
      2081.3?.
      2081.4?.
      202.19.
      2081.4?.
      206.71.
      206.71.
      Die set with stripper ~DIN 9868/ISO 11415
      Description:
      FIBRO Die Sets offer the choice between sintered ferrite sliding guides and
      those of the ball bearing type to DIN-ISO. Both come with headed guide
      bushes. These are seated in push-fit bolster bores and retained there by
      screw clamps.
      Execution:
      Steel: External contours milled, thickness surfaces ground
      a 1 or b 1 %630 = +0,2/+0,4
      a 1 or b 1 .630 = +0,2/+0,6
      Aluminium: External contours sawed, thickness surfaces ground
      a 1 or b 1 = +1/+4
      Advisory: Ordering Code:
      Hole pattern for the screw clamps depends on positioning of working
      surface, determined by last part of the Order No,
      for example: 2010.49.2520.4.865 .1 lengthwise
       .2 across
      Note:
      On request, Standard Die Sets can also be fitted with any other FIBRO
      Guide Elements (see die sets to customers’ drawings ).
      FIBRO will furthermore supply die sets with special machining features .
      A30
      2010.□5.
      2010.□6.
      2010.□9.
      a 1 ⊗ b 1 a 2  ⊗ b 1 a 1  ⊗ a 3 c 1 ± 2 c 2 ± 2 c 3 ± 2 c 4 c 5 d 1 /d 2 u l D e 1 e 2 e 4
      2010. .4031. 3. . 400 u 315 250 u 315 400 u 165 40 50 32 32 12 30/32 u 224 53 310 225 313
      2010. .4031. 4. . 400 u 315 250 u 315 400 u 165 40 40 32 32 12 30/32 u 224 53 310 225 313
      2010. .4040. 1. . 400 u 400 250 u 400 400 u 250 50 50 32 32 12 30/32 u 224 53 310 310 313
      2010. .4040. 2. . 400 u 400 250 u 400 400 u 250 50 40 32 32 12 30/32 u 224 53 310 310 313
      2010. .4040. 3. . 400 u 400 250 u 400 400 u 250 40 50 32 32 12 30/32 u 224 53 310 310 313
      2010. .4040. 4. . 400 u 400 250 u 400 400 u 250 40 40 32 32 12 30/32 u 224 53 310 310 313
      2010. .5025. 1. . 500 u 250 330 u 250 500 u 80 50 50 32 32 15 38/40 u 224 63 400 150 403
      2010. .5025. 2. . 500 u 250 330 u 250 500 u 80 50 40 32 45 15 38/40 u 224 63 400 150 403
      2010. .5025. 3. . 500 u 250 330 u 250 500 u 80 40 50 32 32 15 38/40 u 224 63 400 150 403
      2010. .5025. 4. . 500 u 250 330 u 250 500 u 80 40 40 32 45 15 38/40 u 224 63 400 150 403
      2010. .5031. 1. . 500 u 315 330 u 315 500 u 145 50 50 32 32 15 38/40 u 224 63 400 215 403
      2010. .5031. 2. . 500 u 315 330 u 315 500 u 145 50 40 32 45 15 38/40 u 224 63 400 215 403
      2010. .5031. 3. . 500 u 315 330 u 315 500 u 145 40 50 32 32 15 38/40 u 224 63 400 215 403
      2010. .5031. 4. . 500 u 315 330 u 315 500 u 145 40 40 32 45 15 38/40 u 224 63 400 215 403
      2010. .5040. 1. . 500 u 400 330 u 400 500 u 230 50 50 32 32 15 38/40 u 224 63 400 300 403
      2010. .5040. 2. . 500 u 400 330 u 400 500 u 230 50 40 32 45 15 38/40 u 224 63 400 300 403
      2010. .5040. 3. . 500 u 400 330 u 400 500 u 230 40 50 32 32 15 38/40 u 224 63 400 300 403
      2010. .5040. 4. . 500 u 400 330 u 400 500 u 230 40 40 32 45 15 38/40 u 224 63 400 300 403
      2010. .5050. 1. . 500 u 500 330 u 500 500 u 330 50 50 32 32 15 38/40 u 224 63 400 400 403
      2010. .5050. 2. . 500 u 500 330 u 500 500 u 330 50 40 32 45 15 38/40 u 224 63 400 400 403
      2010. .5050. 3. . 500 u 500 330 u 500 500 u 330 40 50 32 32 15 38/40 u 224 63 400 400 403
      2010. .5050. 4. . 500 u 500 330 u 500 500 u 330 40 40 32 45 15 38/40 u 224 63 400 400 403
      2010. .6331. 1. . 630 u 315 430 u 315 630 u 115 63 63 40 36 18 48/50 u 280 77 510 195 513
      2010. .6331. 2. . 630 u 315 430 u 315 630 u 115 63 50 40 50 18 48/50 u 280 77 510 195 513
      2010. .6331. 3. . 630 u 315 430 u 315 630 u 115 50 63 40 36 18 48/50 u 250 77 510 195 513
      2010. .6331. 4. . 630 u 315 430 u 315 630 u 115 50 50 40 50 18 48/50 u 250 77 510 195 513
      2010. .6340. 1. . 630 u 400 430 u 400 630 u 200 63 63 40 36 18 48/50 u 280 77 510 280 513
      2010. .6340. 2. . 630 u 400 430 u 400 630 u 200 63 50 40 50 18 48/50 u 280 77 510 280 513
      2010. .6340. 3. . 630 u 400 430 u 400 630 u 200 50 63 40 36 18 48/50 u 250 77 510 280 513
      2010. .6340. 4. . 630 u 400 430 u 400 630 u 200 50 50 40 50 18 48/50 u 250 77 510 280 513
      2010. .6350. 1. . 630 u 500 430 u 500 630 u 300 63 63 40 36 18 48/50 u 280 77 510 380 513
      2010. .6350. 2. . 630 u 500 430 u 500 630 u 300 63 50 40 50 18 48/50 u 280 77 510 380 513
      2010. .6350. 3. . 630 u 500 430 u 500 630 u 300 50 63 40 36 18 48/50 u 250 77 510 380 513
      2010. .6350. 4. . 630 u 500 430 u 500 630 u 300 50 50 40 50 18 48/50 u 250 77 510 380 513
      2010. .6363. 1. . 630 u 630 430 u 630 630 u 430 63 63 40 36 18 48/50 u 280 77 510 510 513
      2010. .6363. 2. . 630 u 630 430 u 630 630 u 430 63 50 40 50 18 48/50 u 280 77 510 510 513
      2010. .6363. 3. . 630 u 630 430 u 630 630 u 430 50 63 40 36 18 48/50 u 250 77 510 510 513
      2010. .6363. 4. . 630 u 630 430 u 630 630 u 430 50 50 40 50 18 48/50 u 250 77 510 510 513
      2010. .7140. 1. . 710 u 400 510 u 400 710 u 200 63 63 40 36 18 48/50 u 280 77 590 280 593
      2010. .7140. 2. . 710 u 400 510 u 400 710 u 200 63 50 40 50 18 48/50 u 280 77 590 280 593
      2010. .7140. 3. . 710 u 400 510 u 400 710 u 200 50 63 40 36 18 48/50 u 250 77 590 280 593
      2010. .7140. 4. . 710 u 400 510 u 400 710 u 200 50 50 40 50 18 48/50 u 250 77 590 280 593
      2010. .7150. 1. . 710 u 500 510 u 500 710 u 300 63 63 40 36 18 48/50 u 280 77 590 380 593
      2010. .7150. 2. . 710 u 500 510 u 500 710 u 300 63 50 40 50 18 48/50 u 280 77 590 380 593
      2010. .7150. 3. . 710 u 500 510 u 500 710 u 300 50 63 40 36 18 48/50 u 250 77 590 380 593
      2010. .7150. 4. . 710 u 500 510 u 500 710 u 300 50 50 40 50 18 48/50 u 250 77 590 380 593
      2010. .7163. 1. . 710 u 630 510 u 630 710 u 430 63 63 40 36 18 48/50 u 280 77 590 510 593
      2010. .7163. 2. . 710 u 630 510 u 630 710 u 430 63 50 40 50 18 48/50 u 280 77 590 510 593
      2010. .7163. 3. . 710 u 630 510 u 630 710 u 430 50 63 40 36 18 48/50 u 250 77 590 510 593
      2010. .7163. 4. . 710 u 630 510 u 630 710 u 430 50 50 40 50 18 48/50 u 250 77 590 510 593
      2010. .8040. 1. . 800 u 400 600 u 400 800 u 200 63 63 40 36 18 48/50 u 280 77 680 280 683
      2010. .8040. 2. . 800 u 400 600 u 400 800 u 200 63 50 40 50 18 48/50 u 280 77 680 280 683
      2010. .8040. 3. . 800 u 400 600 u 400 800 u 200 50 63 40 36 18 48/50 u 250 77 680 280 683
      2010. .8040. 4. . 800 u 400 600 u 400 800 u 200 50 50 40 50 18 48/50 u 250 77 680 280 683
      2010. .8050. 1. . 800 u 500 600 u 5 00 800 u 300 63 63 40 36 18 48/50 u 280 77 680 380 683
      2010. .8050. 2. . 800 u 500 600 u 5 00 800 u 300 63 50 40 50 18 48/50 u 280 77 680 380 683
      2010. .8050. 3. . 800 u 500 600 u 5 00 800 u 300 50 63 40 36 18 48/50 u 250 77 680 380 683
      2010. .8050. 4. . 800 u 500 600 u 5 00 800 u 300 50 50 40 50 18 48/50 u 250 77 680 380 683
      2010. .8063. 1. . 800 u 630 600 u 630 800 u 430 63 63 40 36 18 48/50 u 280 77 680 510 683
      2010. .8063. 2. . 800 u 630 600 u 630 800 u 430 63 50 40 50 18 48/50 u 280 77 680 510 683
      2010. .8063. 3. . 800 u 630 600 u 630 800 u 430 50 63 40 36 18 48/50 u 250 77 680 510 683
      2010. .8063. 4. . 800 u 630 600 u 630 800 u 430 50 50 40 50 18 48/50 u 250 77 680 510 683
      2010 . 4 5 . 4025 . 1 . 835 . 2
      subject to alterations
      Order No.
      external
      dimensions
      work area
      across
      work area
      lengthwise
      Die set with stripper ~DIN 9868/ISO 11415
      Type
      2010. □□ . Ordering Code (principle):
      Position of work area: 2
      Guide system: Headed guide bushes,
      ferrite
      Thickness combinations P:
      c 1 - c 2
      External dimensions: a 1 = 400 u b 1 = 250
      Type:
      Position of guide elements
      Material:
      4 = Steel, 6 = Aluminium
      Standard Die sets
      2010.?5.
      2010.?6.
      2010.?9.
      e 2
      b 1
      e 2
      3
      b 1
      1
      b
      3
      c
      1
      c
      c 5
      c 2
      c 4
      l
      d 1
      d 1
      e 1
      a 2
      a 1
      e 4
      a 2
      a 1
      e 1
      a 2
      a 1
      e 1
      d 2
      d 2
      D
      e 2
      a 3
      a
      d 2 d 2
      d 2 d 2
      subject to alterations
      Standard Guide Systems
      Headed Sintered
      Ferrite Bushes,
      carbonitrided = .835.
      Headed Ball
      Bearing Bushes = .865.
      2081.3?.
      202.19.
      2081.3?.
      2081.4?.
      202.19.
      2081.4?.
      206.71.
      206.71.
      Die set with stripper ~DIN 9868/ISO 11415
      Description:
      FIBRO Die Sets offer the choice between sintered ferrite sliding guides and
      those of the ball bearing type to DIN-ISO. Both come with headed guide
      bushes. These are seated in push-fit bolster bores and retained there by
      screw clamps.
      Execution:
      Steel: External contours milled, thickness surfaces ground
      a 1 or b 1 %630 = +0,2/+0,4
      a 1 or b 1 .630 = +0,2/+0,6
      Aluminium: External contours sawed, thickness surfaces ground
      a 1 or b 1 = +1/+4
      Advisory: Ordering Code:
      Hole pattern for the screw clamps depends on positioning of working
      surface, determined by last part of the Order No,
      for example: 2010.49.2520.4.865 .1 lengthwise
       .2 across
      Note:
      On request, Standard Die Sets can also be fitted with any other FIBRO
      Guide Elements (see die sets to customers’ drawings ).
      FIBRO will furthermore supply die sets with special machining features .
      2010.□5.
      2010.□6.
      2010.□9.
      a 1 ⊗ b 1 a 2  ⊗ b 1 a 1  ⊗ a 3 c 1 ± 2 c 2 ± 2 c 3 ± 2 c 4 c 5 d 1 /d 2 u l D e 1 e 2 e 4
      2010. .4031. 3. . 400 u 315 250 u 315 400 u 165 40 50 32 32 12 30/32 u 224 53 310 225 313
      2010. .4031. 4. . 400 u 315 250 u 315 400 u 165 40 40 32 32 12 30/32 u 224 53 310 225 313
      2010. .4040. 1. . 400 u 400 250 u 400 400 u 250 50 50 32 32 12 30/32 u 224 53 310 310 313
      2010. .4040. 2. . 400 u 400 250 u 400 400 u 250 50 40 32 32 12 30/32 u 224 53 310 310 313
      2010. .4040. 3. . 400 u 400 250 u 400 400 u 250 40 50 32 32 12 30/32 u 224 53 310 310 313
      2010. .4040. 4. . 400 u 400 250 u 400 400 u 250 40 40 32 32 12 30/32 u 224 53 310 310 313
      2010. .5025. 1. . 500 u 250 330 u 250 500 u 80 50 50 32 32 15 38/40 u 224 63 400 150 403
      2010. .5025. 2. . 500 u 250 330 u 250 500 u 80 50 40 32 45 15 38/40 u 224 63 400 150 403
      2010. .5025. 3. . 500 u 250 330 u 250 500 u 80 40 50 32 32 15 38/40 u 224 63 400 150 403
      2010. .5025. 4. . 500 u 250 330 u 250 500 u 80 40 40 32 45 15 38/40 u 224 63 400 150 403
      2010. .5031. 1. . 500 u 315 330 u 315 500 u 145 50 50 32 32 15 38/40 u 224 63 400 215 403
      2010. .5031. 2. . 500 u 315 330 u 315 500 u 145 50 40 32 45 15 38/40 u 224 63 400 215 403
      2010. .5031. 3. . 500 u 315 330 u 315 500 u 145 40 50 32 32 15 38/40 u 224 63 400 215 403
      2010. .5031. 4. . 500 u 315 330 u 315 500 u 145 40 40 32 45 15 38/40 u 224 63 400 215 403
      2010. .5040. 1. . 500 u 400 330 u 400 500 u 230 50 50 32 32 15 38/40 u 224 63 400 300 403
      2010. .5040. 2. . 500 u 400 330 u 400 500 u 230 50 40 32 45 15 38/40 u 224 63 400 300 403
      2010. .5040. 3. . 500 u 400 330 u 400 500 u 230 40 50 32 32 15 38/40 u 224 63 400 300 403
      2010. .5040. 4. . 500 u 400 330 u 400 500 u 230 40 40 32 45 15 38/40 u 224 63 400 300 403
      2010. .5050. 1. . 500 u 500 330 u 500 500 u 330 50 50 32 32 15 38/40 u 224 63 400 400 403
      2010. .5050. 2. . 500 u 500 330 u 500 500 u 330 50 40 32 45 15 38/40 u 224 63 400 400 403
      2010. .5050. 3. . 500 u 500 330 u 500 500 u 330 40 50 32 32 15 38/40 u 224 63 400 400 403
      2010. .5050. 4. . 500 u 500 330 u 500 500 u 330 40 40 32 45 15 38/40 u 224 63 400 400 403
      2010. .6331. 1. . 630 u 315 430 u 315 630 u 115 63 63 40 36 18 48/50 u 280 77 510 195 513
      2010. .6331. 2. . 630 u 315 430 u 315 630 u 115 63 50 40 50 18 48/50 u 280 77 510 195 513
      2010. .6331. 3. . 630 u 315 430 u 315 630 u 115 50 63 40 36 18 48/50 u 250 77 510 195 513
      2010. .6331. 4. . 630 u 315 430 u 315 630 u 115 50 50 40 50 18 48/50 u 250 77 510 195 513
      2010. .6340. 1. . 630 u 400 430 u 400 630 u 200 63 63 40 36 18 48/50 u 280 77 510 280 513
      2010. .6340. 2. . 630 u 400 430 u 400 630 u 200 63 50 40 50 18 48/50 u 280 77 510 280 513
      2010. .6340. 3. . 630 u 400 430 u 400 630 u 200 50 63 40 36 18 48/50 u 250 77 510 280 513
      2010. .6340. 4. . 630 u 400 430 u 400 630 u 200 50 50 40 50 18 48/50 u 250 77 510 280 513
      2010. .6350. 1. . 630 u 500 430 u 500 630 u 300 63 63 40 36 18 48/50 u 280 77 510 380 513
      2010. .6350. 2. . 630 u 500 430 u 500 630 u 300 63 50 40 50 18 48/50 u 280 77 510 380 513
      2010. .6350. 3. . 630 u 500 430 u 500 630 u 300 50 63 40 36 18 48/50 u 250 77 510 380 513
      2010. .6350. 4. . 630 u 500 430 u 500 630 u 300 50 50 40 50 18 48/50 u 250 77 510 380 513
      2010. .6363. 1. . 630 u 630 430 u 630 630 u 430 63 63 40 36 18 48/50 u 280 77 510 510 513
      2010. .6363. 2. . 630 u 630 430 u 630 630 u 430 63 50 40 50 18 48/50 u 280 77 510 510 513
      2010. .6363. 3. . 630 u 630 430 u 630 630 u 430 50 63 40 36 18 48/50 u 250 77 510 510 513
      2010. .6363. 4. . 630 u 630 430 u 630 630 u 430 50 50 40 50 18 48/50 u 250 77 510 510 513
      2010. .7140. 1. . 710 u 400 510 u 400 710 u 200 63 63 40 36 18 48/50 u 280 77 590 280 593
      2010. .7140. 2. . 710 u 400 510 u 400 710 u 200 63 50 40 50 18 48/50 u 280 77 590 280 593
      2010. .7140. 3. . 710 u 400 510 u 400 710 u 200 50 63 40 36 18 48/50 u 250 77 590 280 593
      2010. .7140. 4. . 710 u 400 510 u 400 710 u 200 50 50 40 50 18 48/50 u 250 77 590 280 593
      2010. .7150. 1. . 710 u 500 510 u 500 710 u 300 63 63 40 36 18 48/50 u 280 77 590 380 593
      2010. .7150. 2. . 710 u 500 510 u 500 710 u 300 63 50 40 50 18 48/50 u 280 77 590 380 593
      2010. .7150. 3. . 710 u 500 510 u 500 710 u 300 50 63 40 36 18 48/50 u 250 77 590 380 593
      2010. .7150. 4. . 710 u 500 510 u 500 710 u 300 50 50 40 50 18 48/50 u 250 77 590 380 593
      2010. .7163. 1. . 710 u 630 510 u 630 710 u 430 63 63 40 36 18 48/50 u 280 77 590 510 593
      2010. .7163. 2. . 710 u 630 510 u 630 710 u 430 63 50 40 50 18 48/50 u 280 77 590 510 593
      2010. .7163. 3. . 710 u 630 510 u 630 710 u 430 50 63 40 36 18 48/50 u 250 77 590 510 593
      2010. .7163. 4. . 710 u 630 510 u 630 710 u 430 50 50 40 50 18 48/50 u 250 77 590 510 593
      2010. .8040. 1. . 800 u 400 600 u 400 800 u 200 63 63 40 36 18 48/50 u 280 77 680 280 683
      2010. .8040. 2. . 800 u 400 600 u 400 800 u 200 63 50 40 50 18 48/50 u 280 77 680 280 683
      2010. .8040. 3. . 800 u 400 600 u 400 800 u 200 50 63 40 36 18 48/50 u 250 77 680 280 683
      2010. .8040. 4. . 800 u 400 600 u 400 800 u 200 50 50 40 50 18 48/50 u 250 77 680 280 683
      2010. .8050. 1. . 800 u 500 600 u 5 00 800 u 300 63 63 40 36 18 48/50 u 280 77 680 380 683
      2010. .8050. 2. . 800 u 500 600 u 5 00 800 u 300 63 50 40 50 18 48/50 u 280 77 680 380 683
      2010. .8050. 3. . 800 u 500 600 u 5 00 800 u 300 50 63 40 36 18 48/50 u 250 77 680 380 683
      2010. .8050. 4. . 800 u 500 600 u 5 00 800 u 300 50 50 40 50 18 48/50 u 250 77 680 380 683
      2010. .8063. 1. . 800 u 630 600 u 630 800 u 430 63 63 40 36 18 48/50 u 280 77 680 510 683
      2010. .8063. 2. . 800 u 630 600 u 630 800 u 430 63 50 40 50 18 48/50 u 280 77 680 510 683
      2010. .8063. 3. . 800 u 630 600 u 630 800 u 430 50 63 40 36 18 48/50 u 250 77 680 510 683
      2010. .8063. 4. . 800 u 630 600 u 630 800 u 430 50 50 40 50 18 48/50 u 250 77 680 510 683
      2010 . 4 5 . 4025 . 1 . 835 . 2
      subject to alterations
      Order No.
      external
      dimensions
      work area
      across
      work area
      lengthwise
      Die set with stripper ~DIN 9868/ISO 11415
      Type
      2010. □□ . Ordering Code (principle):
      Position of work area: 2
      Guide system: Headed guide bushes,
      ferrite
      Thickness combinations P:
      c 1 - c 2
      External dimensions: a 1 = 400 u b 1 = 250
      Type:
      Position of guide elements
      Material:
      4 = Steel, 6 = Aluminium
      Standard Die sets
      A31
      subject to alterations
      Die set to customer‘s specifications.
      Please copy this page, complete questions, and mail to FIBRO
      201.45. Die set to customer‘s specifications Steel
      201.65. Die set to customer‘s specifications Aluminium
      without stripper with stripper
      Enquiry m Order m
      Material: Aluminium m 201.65. Steel m 201.45.
      Company Telephone
      Name (ref. for replies) Signature
      Guide Pillars
      202.19.
      Guide Pillar
      DIN 9825/ISO 9182-2
      202.21.
      Guide Pillar
      endwise bolt-on type
      2021.46.
      Demountable Pillars
      with collar, push fit,
      screw clamp retention
      2021.46.
      Demountable Pillars
      with collar, push fit,
      screw clamp retention
      2021.43.
      Disc and screw
      2021.50.
      Demountable Pillar,
      conical, central screw
      retention
      2021.39. Liner Bush
      2021.53.
      Disc and Screw
      202.60.
      Stripper-Mounted
      Pillars with Collar,
      demountable, push fit,
      ring nut retention
      Guide Bushes
      2031.34. Mounting
      Flanges, rectangular;
      sintered guide bush,
      carbonitrided
      2031.42. ditto –
      Ball bearing Guide Bush
      206.71. Ball Cage
      2031.38. Shallow Mounting Flanges,
      rectangular;
      sintered guide bush,
      carbonitrided
      2031.44. ditto – Ball
      bearing Guide Bush
      206.71. Ball Cage
      2051.32. Sintered Ferrite Guide Bush,
      carbonitrided, bonded
      2061.44. Guide Bush
      for Ball Bearing Guide
      206.71. Ball Cage
      2081.31./.32./.33./.34./.35.
      Headed Guide Bushes,
      Sintered Ferrite,
      carbonitrided
      2081.44./.45./.46./
      .47./.49. Guide Bushes
      for Ball Bearing Guide
      206.71. Ball Cage
      2091.31./.32./.34. Flanged Guide
      Bushes, Sintered Ferrite,
      carbonitrided
      2091.44./.45./.46.
      Guide Bushes for Ball
      Bearing Guide, push fit
      206.71. Ball Cage
      A32 subject to alterations
      Die set to customer‘s specifications.
      Please copy this page, complete questions, and mail to FIBRO
      201.46. Die set to customer‘s specifications Steel
      201.66. Die set to customer‘s specifications Aluminium
      without stripper with stripper
      Enquiry m Order m
      Material: Aluminium m 201.66. Steel m 201.46.
      Company Telephone
      Name (ref. for replies) Signature
      Guide Pillars
      202.19.
      Guide Pillar
      DIN 9825/ISO 9182-2
      202.21.
      Guide Pillar
      endwise bolt-on type
      2021.46.
      Demountable Pillars
      with collar, push fit,
      screw clamp retention
      2021.46.
      Demountable Pillars
      with collar, push fit,
      screw clamp retention
      2021.43.
      Disc and screw
      2021.50.
      Demountable Pillar,
      conical, central screw
      retention
      2021.39. Liner Bush
      2021.53.
      Disc and Screw
      202.60.
      Stripper-Mounted
      Pillars with Collar,
      demountable, push fit,
      ring nut retention
      Guide Bushes
      2031.34. Mounting
      Flanges, rectangular;
      sintered guide bush,
      carbonitrided
      2031.42. ditto –
      Ball bearing Guide Bush
      206.71. Ball Cage
      2031.38. Shallow Mounting
      Flanges, rectangular;
      sintered guide
      bush, carbonitrided
      2031.44. ditto – Ball
      bearing Guide Bush
      206.71. Ball Cage
      2051.32. Sintered Ferrite Guide
      Bush, carbonitrided, bonded
      2061.44. Guide Bush
      for Ball Bearing Guide
      206.71. Ball Cage
      2081.31./.32./.33./.34./.35.
      Headed Guide Bushes,
      Sintered Ferrite,
      carbonitrided
      2081.44./.45./.46./
      .47./.49. Guide Bushes
      for Ball Bearing Guide
      206.71. Ball Cage
      2091.31./.32./.34. Flanged Guide
      Bushes, Sintered Ferrite,
      carbonitrided
      2091.44./.45./.46.
      Guide Bushes for Ball
      Bearing Guide, push fit
      206.71. Ball Cage
      subject to alterations
      Die set to customer‘s specifications.
      Please copy this page, complete questions, and mail to FIBRO
      201.45. Die set to customer‘s specifications Steel
      201.65. Die set to customer‘s specifications Aluminium
      without stripper with stripper
      Enquiry m Order m
      Material: Aluminium m 201.65. Steel m 201.45.
      Company Telephone
      Name (ref. for replies) Signature
      Guide Pillars
      202.19.
      Guide Pillar
      DIN 9825/ISO 9182-2
      202.21.
      Guide Pillar
      endwise bolt-on type
      2021.46.
      Demountable Pillars
      with collar, push fit,
      screw clamp retention
      2021.46.
      Demountable Pillars
      with collar, push fit,
      screw clamp retention
      2021.43.
      Disc and screw
      2021.50.
      Demountable Pillar,
      conical, central screw
      retention
      2021.39. Liner Bush
      2021.53.
      Disc and Screw
      202.60.
      Stripper-Mounted
      Pillars with Collar,
      demountable, push fit,
      ring nut retention
      Guide Bushes
      2031.34. Mounting
      Flanges, rectangular;
      sintered guide bush,
      carbonitrided
      2031.42. ditto –
      Ball bearing Guide Bush
      206.71. Ball Cage
      2031.38. Shallow Mounting Flanges,
      rectangular;
      sintered guide bush,
      carbonitrided
      2031.44. ditto – Ball
      bearing Guide Bush
      206.71. Ball Cage
      2051.32. Sintered Ferrite Guide Bush,
      carbonitrided, bonded
      2061.44. Guide Bush
      for Ball Bearing Guide
      206.71. Ball Cage
      2081.31./.32./.33./.34./.35.
      Headed Guide Bushes,
      Sintered Ferrite,
      carbonitrided
      2081.44./.45./.46./
      .47./.49. Guide Bushes
      for Ball Bearing Guide
      206.71. Ball Cage
      2091.31./.32./.34. Flanged Guide
      Bushes, Sintered Ferrite,
      carbonitrided
      2091.44./.45./.46.
      Guide Bushes for Ball
      Bearing Guide, push fit
      206.71. Ball Cage
      subject to alterations
      Die set to customer‘s specifications.
      Please copy this page, complete questions, and mail to FIBRO
      201.46. Die set to customer‘s specifications Steel
      201.66. Die set to customer‘s specifications Aluminium
      without stripper with stripper
      Enquiry m Order m
      Material: Aluminium m 201.66. Steel m 201.46.
      Company Telephone
      Name (ref. for replies) Signature
      Guide Pillars
      202.19.
      Guide Pillar
      DIN 9825/ISO 9182-2
      202.21.
      Guide Pillar
      endwise bolt-on type
      2021.46.
      Demountable Pillars
      with collar, push fit,
      screw clamp retention
      2021.46.
      Demountable Pillars
      with collar, push fit,
      screw clamp retention
      2021.43.
      Disc and screw
      2021.50.
      Demountable Pillar,
      conical, central screw
      retention
      2021.39. Liner Bush
      2021.53.
      Disc and Screw
      202.60.
      Stripper-Mounted
      Pillars with Collar,
      demountable, push fit,
      ring nut retention
      Guide Bushes
      2031.34. Mounting
      Flanges, rectangular;
      sintered guide bush,
      carbonitrided
      2031.42. ditto –
      Ball bearing Guide Bush
      206.71. Ball Cage
      2031.38. Shallow Mounting
      Flanges, rectangular;
      sintered guide
      bush, carbonitrided
      2031.44. ditto – Ball
      bearing Guide Bush
      206.71. Ball Cage
      2051.32. Sintered Ferrite Guide
      Bush, carbonitrided, bonded
      2061.44. Guide Bush
      for Ball Bearing Guide
      206.71. Ball Cage
      2081.31./.32./.33./.34./.35.
      Headed Guide Bushes,
      Sintered Ferrite,
      carbonitrided
      2081.44./.45./.46./
      .47./.49. Guide Bushes
      for Ball Bearing Guide
      206.71. Ball Cage
      2091.31./.32./.34. Flanged Guide
      Bushes, Sintered Ferrite,
      carbonitrided
      2091.44./.45./.46.
      Guide Bushes for Ball
      Bearing Guide, push fit
      206.71. Ball Cage
      A33
      subject to alterations
      Die set to customer’s specifications.
      Please copy this page, complete questions, and mail to FIBRO
      201.47. Die set to customer’s specifications Steel
      201.67. Die set to customer’s specifications Aluminium
      without stripper with stripper
      Enquiry m Order m
      Material: Aluminium m 201.67. Steel m 201.47.
      Company Telephone
      Name (ref. for replies) Signature
      Guide Pillars
      202.19.
      Guide Pillar
      DIN 9825/ISO 9182-2
      202.21.
      Guide Pillar
      endwise bolt-on type
      2021.46.
      Demountable Pillars
      with collar, push fit,
      screw clamp retention
      2021.46.
      Demountable Pillars
      with collar, push fit,
      screw clamp retention
      2021.43.
      Disc and screw
      2021.50.
      Demountable Pillar,
      conical, central screw
      retention
      2021.39. Liner Bush
      2021.53.
      Disc and Screw
      Guide Bushes
      2031.34. Mounting
      Flanges, rectangular;
      sintered guide bush,
      carbonitrided
      2031.42. ditto –
      Ball bearing Guide Bush
      206.71. Ball Cage
      2031.38. Shallow Mounting
      Flanges, rectangular;
      sintered guide
      bush, carbonitrided
      2031.44. ditto – Ball
      bearing Guide Bush
      206.71. Ball Cage
      2051.32. Sintered Ferrite Guide
      Bush, carbonitrided, bonded
      2061.44. Guide Bush
      for Ball Bearing Guide
      206.71. Ball Cage
      2081.31./.32./.33./.34./.35.
      Headed Guide Bushes,
      Sintered Ferrite,
      carbonitrided
      2081.44./.45./.46./
      .47./.49. Guide Bushes
      for Ball Bearing Guide
      206.71. Ball Cage
      2091.31./.32./.34. Flanged Guide
      Bushes, Sintered Ferrite,
      carbonitrided
      2091.44./.45./.46.
      Guide Bushes for Ball
      Bearing Guide, push fit
      206.71. Ball Cage
      A34
      Die set to costumer’s specifications.
      Please copy this page, complete questions, and mail to FIBRO
      201.49. Die set to costumer’s specifications Steel
      201.69. Die set to costumer’s specifications Aluminium
      without stripper with stripper
      Enquiry m Order m
      Material: Aluminium m 201.69. Steel m 201.49.
      Company Telephone
      Name (ref. for replies) Signature
      Guide Pillars
      202.19.
      Guide Pillar
      DIN 9825/ISO 9182-2
      202.21.
      Guide Pillar
      endwise bolt-on type
      2021.46.
      Demountable Pillars
      with collar, push fit,
      screw clamp retention
      2021.46.
      Demountable Pillars
      with collar, push fit,
      screw clamp retention
      2021.43.
      Disc and screw
      2021.50.
      Demountable Pillar,
      conical, central screw
      retention
      2021.39. Liner Bush
      2021.53.
      Disc and Screw
      202.60.
      Stripper-Mounted
      Pillars with Collar,
      demountable, push fit,
      ring nut retention
      Guide Bushes
      2031.34. Mounting
      Flanges, rectangular;
      sintered guide bush,
      carbonitrided
      2031.42. ditto –
      Ball bearing Guide Bush
      206.71. Ball Cage
      2031.38. Shallow Mounting
      Flanges, rectangular;
      sintered guide
      bush, carbonitrided
      2031.44. ditto – Ball
      bearing Guide Bush
      206.71. Ball Cage
      2051.32. Sintered Ferrite Guide
      Bush, carbonitrided, bonded
      2061.44. Guide Bush
      for Ball Bearing Guide
      206.71. Ball Cage
      2081.31./.32./.33./.34./.35.
      Headed Guide Bushes,
      Sintered Ferrite,
      carbonitrided
      2081.44./.45./.46./
      .47./.49. Guide Bushes
      for Ball Bearing Guide
      206.71. Ball Cage
      2091.31./.32./.34. Flanged Guide
      Bushes, Sintered Ferrite,
      carbonitrided
      2091.44./.45./.46.
      Guide Bushes for Ball
      Bearing Guide, push fit
      206.71. Ball Cage
      subject to alterations
      Die set to customer’s specifications.
      Please copy this page, complete questions, and mail to FIBRO
      201.47. Die set to customer’s specifications Steel
      201.67. Die set to customer’s specifications Aluminium
      without stripper with stripper
      Enquiry m Order m
      Material: Aluminium m 201.67. Steel m 201.47.
      Company Telephone
      Name (ref. for replies) Signature
      Guide Pillars
      202.19.
      Guide Pillar
      DIN 9825/ISO 9182-2
      202.21.
      Guide Pillar
      endwise bolt-on type
      2021.46.
      Demountable Pillars
      with collar, push fit,
      screw clamp retention
      2021.46.
      Demountable Pillars
      with collar, push fit,
      screw clamp retention
      2021.43.
      Disc and screw
      2021.50.
      Demountable Pillar,
      conical, central screw
      retention
      2021.39. Liner Bush
      2021.53.
      Disc and Screw
      Guide Bushes
      2031.34. Mounting
      Flanges, rectangular;
      sintered guide bush,
      carbonitrided
      2031.42. ditto –
      Ball bearing Guide Bush
      206.71. Ball Cage
      2031.38. Shallow Mounting
      Flanges, rectangular;
      sintered guide
      bush, carbonitrided
      2031.44. ditto – Ball
      bearing Guide Bush
      206.71. Ball Cage
      2051.32. Sintered Ferrite Guide
      Bush, carbonitrided, bonded
      2061.44. Guide Bush
      for Ball Bearing Guide
      206.71. Ball Cage
      2081.31./.32./.33./.34./.35.
      Headed Guide Bushes,
      Sintered Ferrite,
      carbonitrided
      2081.44./.45./.46./
      .47./.49. Guide Bushes
      for Ball Bearing Guide
      206.71. Ball Cage
      2091.31./.32./.34. Flanged Guide
      Bushes, Sintered Ferrite,
      carbonitrided
      2091.44./.45./.46.
      Guide Bushes for Ball
      Bearing Guide, push fit
      206.71. Ball Cage
      Die set to costumer’s specifications.
      Please copy this page, complete questions, and mail to FIBRO
      201.49. Die set to costumer’s specifications Steel
      201.69. Die set to costumer’s specifications Aluminium
      without stripper with stripper
      Enquiry m Order m
      Material: Aluminium m 201.69. Steel m 201.49.
      Company Telephone
      Name (ref. for replies) Signature
      Guide Pillars
      202.19.
      Guide Pillar
      DIN 9825/ISO 9182-2
      202.21.
      Guide Pillar
      endwise bolt-on type
      2021.46.
      Demountable Pillars
      with collar, push fit,
      screw clamp retention
      2021.46.
      Demountable Pillars
      with collar, push fit,
      screw clamp retention
      2021.43.
      Disc and screw
      2021.50.
      Demountable Pillar,
      conical, central screw
      retention
      2021.39. Liner Bush
      2021.53.
      Disc and Screw
      202.60.
      Stripper-Mounted
      Pillars with Collar,
      demountable, push fit,
      ring nut retention
      Guide Bushes
      2031.34. Mounting
      Flanges, rectangular;
      sintered guide bush,
      carbonitrided
      2031.42. ditto –
      Ball bearing Guide Bush
      206.71. Ball Cage
      2031.38. Shallow Mounting
      Flanges, rectangular;
      sintered guide
      bush, carbonitrided
      2031.44. ditto – Ball
      bearing Guide Bush
      206.71. Ball Cage
      2051.32. Sintered Ferrite Guide
      Bush, carbonitrided, bonded
      2061.44. Guide Bush
      for Ball Bearing Guide
      206.71. Ball Cage
      2081.31./.32./.33./.34./.35.
      Headed Guide Bushes,
      Sintered Ferrite,
      carbonitrided
      2081.44./.45./.46./
      .47./.49. Guide Bushes
      for Ball Bearing Guide
      206.71. Ball Cage
      2091.31./.32./.34. Flanged Guide
      Bushes, Sintered Ferrite,
      carbonitrided
      2091.44./.45./.46.
      Guide Bushes for Ball
      Bearing Guide, push fit
      206.71. Ball Cage
      A35
      subject to alterations
      1 l
      2 l
      3 l
      4 l
      Executions:
      With press-fitted guide pillars 202.29.
      2010.5?.????.?.894 2010.5?.????.?.895
      Headed
      Guide
      Bushes
      bronze
      plated
      without
      stripper
      Headed
      Guide
      Bushes
      bronze
      plated
      with
      stripper
      With demountable guide pillars 2021.29.***
      2010.5?.????.?.894.29 2010.5?.????.?.895.29
      Headed
      Guide
      Bushes
      bronze
      plated
      without
      stripper
      Headed
      Guide
      Bushes
      bronze
      plated
      with
      stripper
      Die set without / with stripper ECO-LINE
      Description:
      FIBRO 2010.5x all-steel die sets are supplied with bronze plated guide
      bushes. These are supplied in push-fit bolster bores and retained by screw
      clamps.
      Execution:
      External contours milled
      Thickness surfaces ground
      Note:
      *** to be fixed only with screw clamps
      3
      e
      a 4
      e 2
      b 1
      e 2
      3
      1
      b
      1
      c c 2
      c 4
      d 1
      e 1
      a 2
      a 1
      e 4
      a 2
      a 1
      e 1
      d 2
      D
      a
      d 2 d 2
      d 2 d 2
      b 1
      d 2
      a 1
      e 1
      d 2
      3
      c
      1
      c
      c 5
      c 2
      c 4
      D
      2081.94.
      2081.94.
      2081.95.
      2010.55.
      2010.57.
      2010.59.
      without Stripper
      with Stripper
      A36
       2010.55.
       2010.57.
       2010.59.
      c 1 c 2 c 3
      P* a 1  x b 1 a 2  x b 1 a 1  x a 3 a 1 x a 4 ± 2 ± 2 ± 2 c 4 c 5 d 1 /d 2 l 1 /l 2 l 3 /l 4 D e 1 e 2 e 3 e 4
      2010.55. 2512. 1. 250 x 125 120 x 125 – – 40 40 32 36 12 24/25 180/200 140/180 46 170 – – –
      2010.55. 2512. 4. 250 x 125 120 x 125 – – 32 32 32 36 12 24/25 180/200 140/180 46 170 – – –
      2010.57. 2520. 1. 894 250 x 200 – – 250 x 135 40 40 – 36 – – /25 180/ – 140/ – 46 170 – 160 –
      2010.57. 2520. 4. 894 250 x 200 – – 250 x 135 32 32 – 36 – – /25 180/ – 140/ – 46 170 – 160 –
      2010.59. 2520. 4. 250 x 200 120 x 200 250 x 50 – 32 32 32 36 12 – /25 180/200 140/180 46 170 120 – 173
      2010.59. 2525. 4. 250 x 250 120 x 250 250 x 100 – 32 32 32 36 12 – /25 180/200 140/180 46 170 170 – 173
      2010.55. 3116. 1. 315 x 160 165 x 160 – – 50 50 32 45 12 30/32 200/224 160/200 53 225 – – –
      2010.55. 3116. 4. 315 x 160 165 x 160 – – 40 40 32 45 12 30/32 200/224 160/200 53 225 – – –
      2010.55. 3120. 4. 315 x 200 165 x 200 – – 40 40 32 45 12 30/32 200/224 160/200 53 225 – – –
      2010.57. 3120. 4. 894 315 x 200 – – 315 x 125 40 40 – 45 – – /32 200/ – 160/ – 53 225 – 155 –
      2010.59. 3120. 4. 315 x 200 165 x 200 315 x 30 – 40 40 32 45 12 – /32 200/224 160/200 53 225 110 – 228
      2010.57. 3125. 1. 894 315 x 250 – – 315 x 175 50 50 – 45 – – /32 200/ – 160/ – 53 225 – 205 –
      2010.59. 3125. 1. 315 x 250 165 x 250 315 x 80 – 50 50 32 45 12 – /32 200/224 160/200 53 225 160 – 228
      2010.59. 3125. 4. 315 x 250 165 x 250 315 x 80 – 40 40 32 45 12 – /32 200/224 160/200 53 225 160 – 228
      2010.59. 3131. 1. 315 x 315 165 x 315 315 x 145 – 50 50 32 45 12 – /32 200/224 160/200 53 225 225 – 228
      2010.55. 4020. 4. 400 x 200 250 x 200 – – 40 40 32 45 12 30/32 200/224 160/200 53 310 – – –
      2010.59. 4020. 4. 400 x 200 250 x 200 400 x 30 – 40 40 32 45 12 – /32 200/224 160/200 53 310 110 – 313
      2010.55. 4025. 1. 400 x 250 250 x 250 – – 50 50 32 45 12 30/32 200/224 160/200 53 310 – – –
      2010.57. 4025. 1. 894 400 x 250 – – 400 x 175 50 50 – 45 – – /32 200/ – 160/ – 53 310 – 205 –
      2010.59. 4025. 1. 400 x 250 250 x 250 400 x 80 – 50 50 32 45 12 – /32 200/224 160/200 53 310 160 – 313
      2010.59. 4025. 4. 400 x 250 250 x 250 400 x 80 – 40 40 32 45 12 – /32 200/224 160/200 53 310 160 – 313
      2010.57. 4031. 4. 894 400 x 315 – – 400 x 240 40 40 – 45 – – /32 200/ – 160/ – 53 310 – 270 –
      2010.59. 4031. 1. 400 x 315 250 x 315 400 x 145 – 50 50 32 45 12 – /32 200/224 160/200 53 310 225 – 313
      2010.59. 4040. 1. 400 x 400 250 x 400 400 x 230 – 50 50 32 45 12 – /32 200/224 160/200 53 310 310 – 313
      2010.59. 4040. 4. 400 x 400 250 x 400 400 x 230 – 40 40 32 45 12 – /32 200/224 160/200 53 310 310 – 313
      2010.55. 5025. 1. 500 x 250 325 x 250 – – 50 50 32 45 15 38/40 200/224 160/200 63 400 – – –
      2010.59. 5025. 1. 500 x 250 325 x 250 500 x 75 – 50 50 32 45 15 – /40 200/224 160/200 63 400 150 – 403
      2010.59. 5025. 4. 500 x 250 325 x 250 500 x 75 – 40 40 32 45 15 – /40 200/224 160/200 63 400 150 – 403
      2010.55. 5031. 1. 500 x 315 325 x 315 – – 50 50 32 45 15 38/40 200/224 160/200 63 400 – – –
      2010.59. 5031. 1. 500 x 315 325 x 315 500 x 140 – 50 50 32 45 15 – /40 200/224 160/200 63 400 215 – 403
      2010.59. 5040. 1. 500 x 400 325 x 400 500 x 225 – 50 50 32 45 15 – /40 200/224 160/200 63 400 300 – 403
      2010.59. 5050. 1. 500 x 500 325 x 500 500 x 325 – 50 50 32 45 15 – /40 200/224 160/200 63 400 400 – 403
      a 1 x b 1 = 400 x 250; c 1 = c 2 = 50) = 2010.55.4025.1.
      = 895.
      = 29
      = 2010.55.4025.1.895.29
      a 1 x b 1 = 400 x 250; c 1 = c 2 = 50) = 2010.55.4025.1.
      = 895
      = 2010.55.4025.1.895
      2010.5□ .
      subject to alterations
      Die set without / with stripper ECO-LINE
      Type
      Order No Exe- Exe- ext. dim. Work area(s)**
      Type Size P* cution cution***
      *Thickness combinations
      ** Work area dimensions are not affected
      by the positions of the screw clamps that retain the bushes!
      ***With demountable guide pillars 2021.29.
      Type of Die Set (external dimensions
      a 1 x b 1 = 400 x 250; c 1 = c 2 = 50)
      Execution with stripper
      with demountable guide pillars 2021.29.
      Order No
      Next day delivery!
      Type of Die Set (external dimensions
      a 1 x b 1 = 400 x 250; c 1 = c 2 = 50)
      Execution with stripper
      Order No
      Ordering code (example):
      Ordering code (example):
      subject to alterations
      1 l
      2 l
      3 l
      4 l
      Executions:
      With press-fitted guide pillars 202.29.
      2010.5?.????.?.894 2010.5?.????.?.895
      Headed
      Guide
      Bushes
      bronze
      plated
      without
      stripper
      Headed
      Guide
      Bushes
      bronze
      plated
      with
      stripper
      With demountable guide pillars 2021.29.***
      2010.5?.????.?.894.29 2010.5?.????.?.895.29
      Headed
      Guide
      Bushes
      bronze
      plated
      without
      stripper
      Headed
      Guide
      Bushes
      bronze
      plated
      with
      stripper
      Die set without / with stripper ECO-LINE
      Description:
      FIBRO 2010.5x all-steel die sets are supplied with bronze plated guide
      bushes. These are supplied in push-fit bolster bores and retained by screw
      clamps.
      Execution:
      External contours milled
      Thickness surfaces ground
      Note:
      *** to be fixed only with screw clamps
      3
      e
      a 4
      e 2
      b 1
      e 2
      3
      1
      b
      1
      c c 2
      c 4
      d 1
      e 1
      a 2
      a 1
      e 4
      a 2
      a 1
      e 1
      d 2
      D
      a
      d 2 d 2
      d 2 d 2
      b 1
      d 2
      a 1
      e 1
      d 2
      3
      c
      1
      c
      c 5
      c 2
      c 4
      D
      2081.94.
      2081.94.
      2081.95.
      2010.55.
      2010.57.
      2010.59.
      without Stripper
      with Stripper
       2010.55.
       2010.57.
       2010.59.
      c 1 c 2 c 3
      P* a 1  x b 1 a 2  x b 1 a 1  x a 3 a 1 x a 4 ± 2 ± 2 ± 2 c 4 c 5 d 1 /d 2 l 1 /l 2 l 3 /l 4 D e 1 e 2 e 3 e 4
      2010.55. 2512. 1. 250 x 125 120 x 125 – – 40 40 32 36 12 24/25 180/200 140/180 46 170 – – –
      2010.55. 2512. 4. 250 x 125 120 x 125 – – 32 32 32 36 12 24/25 180/200 140/180 46 170 – – –
      2010.57. 2520. 1. 894 250 x 200 – – 250 x 135 40 40 – 36 – – /25 180/ – 140/ – 46 170 – 160 –
      2010.57. 2520. 4. 894 250 x 200 – – 250 x 135 32 32 – 36 – – /25 180/ – 140/ – 46 170 – 160 –
      2010.59. 2520. 4. 250 x 200 120 x 200 250 x 50 – 32 32 32 36 12 – /25 180/200 140/180 46 170 120 – 173
      2010.59. 2525. 4. 250 x 250 120 x 250 250 x 100 – 32 32 32 36 12 – /25 180/200 140/180 46 170 170 – 173
      2010.55. 3116. 1. 315 x 160 165 x 160 – – 50 50 32 45 12 30/32 200/224 160/200 53 225 – – –
      2010.55. 3116. 4. 315 x 160 165 x 160 – – 40 40 32 45 12 30/32 200/224 160/200 53 225 – – –
      2010.55. 3120. 4. 315 x 200 165 x 200 – – 40 40 32 45 12 30/32 200/224 160/200 53 225 – – –
      2010.57. 3120. 4. 894 315 x 200 – – 315 x 125 40 40 – 45 – – /32 200/ – 160/ – 53 225 – 155 –
      2010.59. 3120. 4. 315 x 200 165 x 200 315 x 30 – 40 40 32 45 12 – /32 200/224 160/200 53 225 110 – 228
      2010.57. 3125. 1. 894 315 x 250 – – 315 x 175 50 50 – 45 – – /32 200/ – 160/ – 53 225 – 205 –
      2010.59. 3125. 1. 315 x 250 165 x 250 315 x 80 – 50 50 32 45 12 – /32 200/224 160/200 53 225 160 – 228
      2010.59. 3125. 4. 315 x 250 165 x 250 315 x 80 – 40 40 32 45 12 – /32 200/224 160/200 53 225 160 – 228
      2010.59. 3131. 1. 315 x 315 165 x 315 315 x 145 – 50 50 32 45 12 – /32 200/224 160/200 53 225 225 – 228
      2010.55. 4020. 4. 400 x 200 250 x 200 – – 40 40 32 45 12 30/32 200/224 160/200 53 310 – – –
      2010.59. 4020. 4. 400 x 200 250 x 200 400 x 30 – 40 40 32 45 12 – /32 200/224 160/200 53 310 110 – 313
      2010.55. 4025. 1. 400 x 250 250 x 250 – – 50 50 32 45 12 30/32 200/224 160/200 53 310 – – –
      2010.57. 4025. 1. 894 400 x 250 – – 400 x 175 50 50 – 45 – – /32 200/ – 160/ – 53 310 – 205 –
      2010.59. 4025. 1. 400 x 250 250 x 250 400 x 80 – 50 50 32 45 12 – /32 200/224 160/200 53 310 160 – 313
      2010.59. 4025. 4. 400 x 250 250 x 250 400 x 80 – 40 40 32 45 12 – /32 200/224 160/200 53 310 160 – 313
      2010.57. 4031. 4. 894 400 x 315 – – 400 x 240 40 40 – 45 – – /32 200/ – 160/ – 53 310 – 270 –
      2010.59. 4031. 1. 400 x 315 250 x 315 400 x 145 – 50 50 32 45 12 – /32 200/224 160/200 53 310 225 – 313
      2010.59. 4040. 1. 400 x 400 250 x 400 400 x 230 – 50 50 32 45 12 – /32 200/224 160/200 53 310 310 – 313
      2010.59. 4040. 4. 400 x 400 250 x 400 400 x 230 – 40 40 32 45 12 – /32 200/224 160/200 53 310 310 – 313
      2010.55. 5025. 1. 500 x 250 325 x 250 – – 50 50 32 45 15 38/40 200/224 160/200 63 400 – – –
      2010.59. 5025. 1. 500 x 250 325 x 250 500 x 75 – 50 50 32 45 15 – /40 200/224 160/200 63 400 150 – 403
      2010.59. 5025. 4. 500 x 250 325 x 250 500 x 75 – 40 40 32 45 15 – /40 200/224 160/200 63 400 150 – 403
      2010.55. 5031. 1. 500 x 315 325 x 315 – – 50 50 32 45 15 38/40 200/224 160/200 63 400 – – –
      2010.59. 5031. 1. 500 x 315 325 x 315 500 x 140 – 50 50 32 45 15 – /40 200/224 160/200 63 400 215 – 403
      2010.59. 5040. 1. 500 x 400 325 x 400 500 x 225 – 50 50 32 45 15 – /40 200/224 160/200 63 400 300 – 403
      2010.59. 5050. 1. 500 x 500 325 x 500 500 x 325 – 50 50 32 45 15 – /40 200/224 160/200 63 400 400 – 403
      a 1 x b 1 = 400 x 250; c 1 = c 2 = 50) = 2010.55.4025.1.
      = 895.
      = 29
      = 2010.55.4025.1.895.29
      a 1 x b 1 = 400 x 250; c 1 = c 2 = 50) = 2010.55.4025.1.
      = 895
      = 2010.55.4025.1.895
      2010.5□ .
      subject to alterations
      Die set without / with stripper ECO-LINE
      Type
      Order No Exe- Exe- ext. dim. Work area(s)**
      Type Size P* cution cution***
      *Thickness combinations
      ** Work area dimensions are not affected
      by the positions of the screw clamps that retain the bushes!
      ***With demountable guide pillars 2021.29.
      Type of Die Set (external dimensions
      a 1 x b 1 = 400 x 250; c 1 = c 2 = 50)
      Execution with stripper
      with demountable guide pillars 2021.29.
      Order No
      Next day delivery!
      Type of Die Set (external dimensions
      a 1 x b 1 = 400 x 250; c 1 = c 2 = 50)
      Execution with stripper
      Order No
      Ordering code (example):
      Ordering code (example):
      A37
      subject to alterations
      Steel plate ISO 6753-1
      2900.
      Execution:
      External contours milled. Thickness surfaces ground
      Note:
      l or b ≤ 630 = +0,2 / +0,4
      l or b > 630 = +0,2 / +0,6
      Plates from 500 ⊗ 500 mm on are manufactured with lifting thread.
      A38
      2900.
      Order No
      Size
      l x b x t Order No
      Size
      l x b x t Order No
      Size
      l x b x t
      2900.1608.25 160 x 80 x 25 2900.3120.40 315 x 200 x 40 2900.6340.32 630 x 400 x 32
      2900.1608.32 160 x 80 x 32 2900.3120.50 315 x 200 x 50 2900.6340.40 630 x 400 x 40
      2900.1610.25 160 x 100 x 25 2900.3125.32 315 x 250 x 32 2900.6340.50 630 x 400 x 50
      2900.1610.32 160 x 100 x 32 2900.3125.40 315 x 250 x 40 2900.6340.63 630 x 400 x 63
      2900.1612.25 160 x 125 x 25 2900.3125.50 315 x 250 x 50 2900.6350.32 630 x 500 x 32
      2900.1612.32 160 x 125 x 32 2900.3131.32 315 x 315 x 32 2900.6350.40 630 x 500 x 40
      2900.1616.25 160 x 160 x 25 2900.3131.40 315 x 315 x 40 2900.6350.50 630 x 500 x 50
      2900.1616.32 160 x 160 x 32 2900.3131.50 315 x 315 x 50 2900.6350.63 630 x 500 x 63
      2900.2010.25 200 x 100 x 25 2900.4020.32 400 x 200 x 32 2900.6363.32 630 x 630 x 32
      2900.2010.32 200 x 100 x 32 2900.4020.40 400 x 200 x 40 2900.6363.40 630 x 630 x 40
      2900.2010.40 200 x 100 x 40 2900.4020.50 400 x 200 x 50 2900.6363.50 630 x 630 x 50
      2900.2012.25 200 x 125 x 25 2900.4025.32 400 x 250 x 32 2900.6363.63 630 x 630 x 63
      2900.2012.32 200 x 125 x 32 2900.4025.40 400 x 250 x 40 2900.7140.32 710 x 400 x 32
      2900.2012.40 200 x 125 x 40 2900.4025.50 400 x 250 x 50 2900.7140.40 710 x 400 x 40
      2900.2016.25 200 x 160 x 25 2900.4031.32 400 x 315 x 32 2900.7140.50 710 x 400 x 50
      2900.2016.32 200 x 160 x 32 2900.4031.40 400 x 315 x 40 2900.7140.63 710 x 400 x 63
      2900.2016.40 200 x 160 x 40 2900.4031.50 400 x 315 x 50 2900.7150.32 710 x 500 x 32
      2900.2020.25 200 x 200 x 25 2900.4040.32 400 x 400 x 32 2900.7150.40 710 x 500 x 40
      2900.2020.32 200 x 200 x 32 2900.4040.40 400 x 400 x 40 2900.7150.50 710 x 500 x 50
      2900.2020.40 200 x 200 x 40 2900.4040.50 400 x 400 x 50 2900.7150.63 710 x 500 x 63
      2900.2512.25 250 x 125 x 25 2900.5025.32 500 x 250 x 32 2900.7163.32 710 x 630 x 32
      2900.2512.32 250 x 125 x 32 2900.5025.40 500 x 250 x 40 2900.7163.40 710 x 630 x 40
      2900.2512.40 250 x 125 x 40 2900.5025.50 500 x 250 x 50 2900.7163.50 710 x 630 x 50
      2900.2516.25 250 x 160 x 25 2900.5031.32 500 x 315 x 32 2900.7163.63 710 x 630 x 63
      2900.2516.32 250 x 160 x 32 2900.5031.40 500 x 315 x 40 2900.8040.32 800 x 400 x 32
      2900.2516.40 250 x 160 x 40 2900.5031.50 500 x 315 x 50 2900.8040.40 800 x 400 x 40
      2900.2520.25 250 x 200 x 25 2900.5040.32 500 x 400 x 32 2900.8040.50 800 x 400 x 50
      2900.2520.32 250 x 200 x 32 2900.5040.40 500 x 400 x 40 2900.8040.63 800 x 400 x 63
      2900.2520.40 250 x 200 x 40 2900.5040.50 500 x 400 x 50 2900.8050.32 800 x 500 x 32
      2900.2525.25 250 x 250 x 25 2900.5050.32 500 x 500 x 32 2900.8050.40 800 x 500 x 40
      2900.2525.32 250 x 250 x 32 2900.5050.40 500 x 500 x 40 2900.8050.50 800 x 500 x 50
      2900.2525.40 250 x 250 x 40 2900.5050.50 500 x 500 x 50 2900.8050.63 800 x 500 x 63
      2900.3116.32 315 x 160 x 32 2900.6331.32 630 x 315 x 32 2900.8063.32 800 x 630 x 32
      2900.3116.40 315 x 160 x 40 2900.6331.40 630 x 315 x 40 2900.8063.40 800 x 630 x 40
      2900.3116.50 315 x 160 x 50 2900.6331.50 630 x 315 x 50 2900.8063.50 800 x 630 x 50
      2900.3120.32 315 x 200 x 32 2900.6331.63 630 x 315 x 63 2900.8063.63 800 x 630 x 63
      Steel plate ISO 6753-1
      subject to alterations
      Aluminium plate ~ISO 6753-1
      2910. .2
      Execution:
      2910.□□□□.□□.2
      Two external contours milled. Thickness surfaces ground.
      Note:
      Plates from 500 ⊗ 500 mm on are manufactured with lifting thread.
      2910. .0
      Execution:
      2910.□□□□.□□.0
      External contours sawed. Thickness surfaces ground.
      Note:
      Plates from 500 ⊗ 500 mm on are manufactured with lifting thread.
      A39
      2910.
      Order No
      Size
      l x b x t Order No
      Size
      l x b x t Order No
      Size
      l x b x t Order No
      Size
      l x b x t
      2910.1608.25.□ 160 x 80 x 25 2910.2520.32.□ 250 x 200 x 32 2910.4040.40.□ 400 x 400 x 40 2910.6363.40.□ 630 x 630 x 40
      2910.1608.32.□ 160 x 80 x 32 2910.2520.40.□ 250 x 200 x 40 2910.4040.50.□ 400 x 400 x 50 2910.6363.50.□ 630 x 630 x 50
      2910.1610.25.□ 160 x 100 x 25 2910.2525.25.□ 250 x 250 x 25 2910.5025.32.□ 500 x 250 x 32 2910.6363.63.□ 630 x 630 x 63
      2910.1610.32.□ 160 x 100 x 32 2910.2525.32.□ 250 x 250 x 32 2910.5025.40.□ 500 x 250 x 40 2910.7140.32.□ 710 x 400 x 32
      2910.1612.25.□ 160 x 125 x 25 2910.2525.40.□ 250 x 250 x 40 2910.5025.50.□ 500 x 250 x 50 2910.7140.40.□ 710 x 400 x 40
      2910.1612.32.□ 160 x 125 x 32 2910.3116.32.□ 315 x 160 x 32 2910.5031.32.□ 500 x 315 x 32 2910.7140.50.□ 710 x 400 x 50
      2910.1616.25.□ 160 x 160 x 25 2910.3116.40.□ 315 x 160 x 40 2910.5031.40.□ 500 x 315 x 40 2910.7140.63.□ 710 x 400 x 63
      2910.1616.32.□ 160 x 160 x 32 2910.3116.50.□ 315 x 160 x 50 2910.5031.50.□ 500 x 315 x 50 2910.7150.32.□ 710 x 500 x 32
      2910.2010.25.□ 200 x 100 x 25 2910.3120.32.□ 315 x 200 x 32 2910.5040.32.□ 500 x 400 x 32 2910.7150.40.□ 710 x 500 x 40
      2910.2010.32.□ 200 x 100 x 32 2910.3120.40.□ 315 x 200 x 40 2910.5040.40.□ 500 x 400 x 40 2910.7150.50.□ 710 x 500 x 50
      2910.2010.40.□ 200 x 100 x 40 2910.3120.50.□ 315 x 200 x 50 2910.5040.50.□ 500 x 400 x 50 2910.7150.63.□ 710 x 500 x 63
      2910.2012.25.□ 200 x 125 x 25 2910.3125.32.□ 315 x 250 x 32 2910.5050.32.□ 500 x 500 x 32 2910.7163.32.□ 710 x 630 x 32
      2910.2012.32.□ 200 x 125 x 32 2910.3125.40.□ 315 x 250 x 40 2910.5050.40.□ 500 x 500 x 40 2910.7163.40.□ 710 x 630 x 40
      2910.2012.40.□ 200 x 125 x 40 2910.3125.50.□ 315 x 250 x 50 2910.5050.50.□ 500 x 500 x 50 2910.7163.50.□ 710 x 630 x 50
      2910.2016.25.□ 200 x 160 x 25 2910.3131.32.□ 315 x 315 x 32 2910.6331.32.□ 630 x 315 x 32 2910.7163.63.□ 710 x 630 x 63
      2910.2016.32.□ 200 x 160 x 32 2910.3131.40.□ 315 x 315 x 40 2910.6331.40.□ 630 x 315 x 40 2910.8040.32.□ 800 x 400 x 32
      2910.2016.40.□ 200 x 160 x 40 2910.3131.50.□ 315 x 315 x 50 2910.6331.50.□ 630 x 315 x 50 2910.8040.40.□ 800 x 400 x 40
      2910.2020.25.□ 200 x 200 x 25 2910.4020.32.□ 400 x 200 x 32 2910.6331.63.□ 630 x 315 x 63 2910.8040.50.□ 800 x 400 x 50
      2910.2020.32.□ 200 x 200 x 32 2910.4020.40.□ 400 x 200 x 40 2910.6340.32.□ 630 x 400 x 32 2910.8040.63.□ 800 x 400 x 63
      2910.2020.40.□ 200 x 200 x 40 2910.4020.50.□ 400 x 200 x 50 2910.6340.40.□ 630 x 400 x 40 2910.8050.32.□ 800 x 500 x 32
      2910.2512.25.□ 250 x 125 x 25 2910.4025.32.□ 400 x 250 x 32 2910.6340.50.□ 630 x 400 x 50 2910.8050.40.□ 800 x 500 x 40
      2910.2512.32.□ 250 x 125 x 32 2910.4025.40.□ 400 x 250 x 40 2910.6340.63.□ 630 x 400 x 63 2910.8050.50.□ 800 x 500 x 50
      2910.2512.40.□ 250 x 125 x 40 2910.4025.50.□ 400 x 250 x 50 2910.6350.32.□ 630 x 500 x 32 2910.8050.63.□ 800 x 500 x 63
      2910.2516.25.□ 250 x 160 x 25 2910.4031.32.□ 400 x 315 x 32 2910.6350.40.□ 630 x 500 x 40 2910.8063.32.□ 800 x 630 x 32
      2910.2516.32.□ 250 x 160 x 32 2910.4031.40.□ 400 x 315 x 40 2910.6350.50.□ 630 x 500 x 50 2910.8063.40.□ 800 x 630 x 40
      2910.2516.40.□ 250 x 160 x 40 2910.4031.50.□ 400 x 315 x 50 2910.6350.63.□ 630 x 500 x 63 2910.8063.50.□ 800 x 630 x 50
      2910.2520.25.□ 250 x 200 x 25 2910.4040.32.□ 400 x 400 x 32 2910.6363.32.□ 630 x 630 x 32 2910.8063.63.□ 800 x 630 x 63
      Aluminium plate ~ISO 6753-1
      Ordering Code (example):
      Aluminium plate ~ISO 6753-1 =2910.
      Length L 160 mm = 16
      Width B 80 mm = 08.
      Thickness T 25 mm = 25.
      Execution FORM sawn = 0
      Order No =2910. 1608. 25.0
      subject to alterations
      Die set press unit
      2011.45. 2011.49.
      a 2
      a 1
      e
      a 2
      a 1
      e
      b 1
      e 2
      b 2
      e 1
      b 1
      2011.4 .4031. . .1
      Order number system:
       T grooves: .0 = without
       .1 = in top bolster and intermediate plate
       Installation height h
       Version: 000. = without guide bolster
       001. = without guide bolster – tension rod not hardened
       831. = guide bolster with plain bearing
       862. = guide bolster with ball bearing guide
       External dimensions (a 1 3 b 1 ) 40: a 1 = 400 mm; 31: b 1 = 315 mm
       Number of pillars: 5. = two guide pillars
       9. = four guide pillars
       Steel plates
       Die Set Press Unit – ISO sizes
      Coupling spigots and -holders between cylinder and tool:
      see next page but one.
      ±2
      3
      c
      1 ±2
      c c 2 ±2
      tee slot
      DIN 650
      10 H8
      d 3
      daylight acc. to
      customer’s specifications
      2011.45.
      2011.49.
      d 3
      A40
      Order No
      work area
      a 1 ⊗b 2
      work area
      a 2 ⊗b 1
      max. press thrust
      kN a 1 b 1 c 1 c 2 c 3 d 3 e e 1 e 2
      2011.4□ .2020. □□□ . □□□ . □ 84 x 200 200 x 62 20 200 200 32 32 32 25 132 132 129
      2011.4□ .2520. □□□ . □□□ . □ 134 x 200 250 x 62 20 250 200 32 32 32 25 182 132 129
      2011.4□ .2525. □□□ . □□□ . □ 118 x 250 250 x 97 40 250 250 40 40 40 32 174 174 171
      2011.4□ .3125. □□□ . □□□ . □ 185 x 250 315 x 97 40 315 250 40 40 40 32 239 174 171
      2011.4□ .3131. □□□ . □□□ . □ 183 x 315 315 x 162 40 315 315 40 40 40 32 239 239 236
      2011.4□ .4031. □□□ . □□□ . □ 268 x 315 400 x 162 80 400 315 50 50 50 32 324 239 236
      2011.4□ .4040. □□□ . □□□ . □ 268 x 400 400 x 247 80 400 400 50 50 50 32 324 324 321
      2011.45. Die set press unit
      subject to alterations
      Die set press unit
      hydraulic jack
      ±2
      3 1 ±2
      height to guided
      bolster bottom
      daylight acc. to
      customer’s specifications
      c 2 ±2
      tee slot
      DIN 650 10 H12
      201.145.
      201.149.
      l 1 c c
      d 3 d 3
      b 1
      201.145. 201.149.
      a 2
      a 1
      e
      a 2
      a 1
      e
      b 1
      e 2
      b 2
      e 1
      201.14 .4031. . .1
      Order number system:
       T grooves: .0 = without
       .1 = in top bolster and intermediate plate
       Installation height h
       Version: 831. = guide bolster with plain bearing
       862. = guide bolster with ball bearing guide
       External dimensions (a 1 3 b 1 ) 40: a 1 = 400 mm; 31: b 1 = 315 mm
       Number of pillars: 5. = two guide pillars
       9. = four guide pillars
       Steel plates
       Die Set Press Unit – ISO sizes
      Execution: Headed guide bushes,
      hydraulic jack.
      A41
      Order No
      work area
      a 1 ⊗b 2
      work area
      a 2 ⊗b 1
      max. press thrust
      kN a 1 b 1 c 1 c 2 c 3 d 3 e e 1 e 2 l 1 Stroke max.
      201.14□ .2020. □□□ . □□□ . □ 84 x 200 200 x 62 20 200 200 32 32 32 25 132 132 129 200 130
      201.14□ .2520. □□□ . □□□ . □ 134 x 200 250 x 62 20 250 200 32 32 32 25 182 132 129 200 130
      201.14□ .2525. □□□ . □□□ . □ 118 x 250 250 x 97 40 250 250 40 40 40 32 174 174 171 200 130
      201.14□ .3125. □□□ . □□□ . □ 183 x 250 315 x 97 40 315 250 40 40 40 32 239 174 171 200 130
      201.14□ .3131. □□□ . □□□ . □ 283 x 315 315 x 162 40 315 315 40 40 40 32 239 239 236 200 130
      201.14□ .4031. □□□ . □□□ . □ 268 x 315 400 x 162 80 400 315 50 50 50 32 324 239 236 245 160
      201.14□ .4040. □□□ . □□□ . □ 268 x 400 400 x 247 80 400 400 50 50 50 32 324 324 321 245 160
      201.145. Die set press unit
      1
      s
      M
      212.16.1.
      SW
      d 8
      d 5
      d 4
      l 1
      2
      l
      5
      l
      2
      s
      212.11.
      SW
      M
      d
      d
      4
      5
      3
      l
      5
      l
      d 4 d 5 d 8 SW l 1 l 2 l 5 * M* s 1 s 2
      212.16.1.026 26 33 45 50 70 57,4 12,6 7
      212.16.1.033 33 49 60 65 86 67,4 18,6 10
      M d 4 d 5 l 3 l 5 SW
      212.11.016 M16 ⊗ 1.5 25 32 18 23 36
      212.11.030 M30 ⊗ 2 32 48 30 43 60
      d 4 d 5 d 8 d 7 l 3 l 5
      212.15.063 25 32 63 46 18 31
      212.15.080 32 48 80 63 18 37
      subject to alterations
      Die Set Press Unit-Accessories
      Coupling Spigot Holder
      Coupling Spigot
      212.16.1. Coupling Spigot Holder
      Order No
      * upon customer‘s specification
      212.11. Coupling Spigot
      Order No
      212.15.
      d
      d
      8
      7
      d
      d
      4
      5
      5
      l
      3
      l
      4 socket cap screws
      M8 x 25
      DIN EN ISO 4762
      212.15. Coupling Spigot
      Order No
      A42
      subject to alterations
      Special Die Set (All-Steel) to Customers‘ Specification
      A43
      subject to alterations
      Special Die Set (All-Steel) to Customers‘ Specification
      A44
      1350
      subject to alterations
      Special Die Set (All-Steel) to Customers‘ Specification
      subject to alterations
      Special Die Set (All-Steel) to Customers‘ Specification
      1350
      subject to alterations
      Special Die Set (All-Steel) to Customers‘ Specification
      A45
      subject to alterations
      Special Die Set (All-Steel) to Customers‘ Specification
      A46
      Progression
      Lamination
      Die Set Units
      subject to alterations
      Special Die Set (All-Steel) to Customers‘ Specification
      Progression
      Lamination
      Die Set Units
      A47
      subject to alterations
      202.60.
      Ball Bearing
      Guide 2061.44.
      206.71.
      Stripper-Mounted Pillar
      Ball Bearing
      Guide 2061.44.
      206.71.
      Top Clamping Plate
      Top Bolster
      Combination Spring- and
      Spacer Unit 244.25./.40.
      Retainer Gib
      Thrust Plate
      Top Spacer
      (Compensation Disc)
      Punch Retainer Plate
      Clamping Stripper
      Bottom Spacer
      Bottom Bolster
      Bottom Clamping Plate
      Bunter Bar
      Clamping Area
      Progression Lamination Die Set Unit
      A48 subject to alterations
      Progression lamination die set unit
      Die set units for progression/lamination dies
      The accuracy of a stamping die starts with the die set! When we designed
      these new units, special attention was paid to the stability and load capaci-
      ty of the guide pillars.
      The eventual introduction of the stripper-mounted pillar in its present form
      brought an eightfold increase in transverse load-carrying capacity relative
      to conventional pillars; under the same radial force, deflection is reduced
      to one-eigth.
      While modern high-speed presses have made ball bearing guides all but
      mandatory, the limited load capacity of these bearings remains a disad-
      vantage, calling for generous nominal pillar diameters and the use of more
      than two guide bearings.
      Considerable forces of inertia are encountered during the reversal of stro-
      king motion at speeds in excess of 500 SPM. In order to keep these harmful
      forces to a minimum, FIBRO Stripper-Mounted Pillars are provided with
      hollow cores.
      Considerations such as these formed the basis for the development of
      our new die set units with stripper-mounted pillars – a concept that has
      resulted in greatly improved accuracy, overall stability and speed capacity.
      Retaining slots for matrixes and
      guiding-stripper plate
      It is of paramount importance to the accuracy of the final die assembly
      that both these slots are in perfect vertical alignment, to within a few mm.
      From long experience we know that all heavy machining of die set
      apertures must precede the finish-machining of the two retainer slots for
      the matrix inserts and the guiding/clamping stripper plate.
      Whenever the machining of such apertures is not entrusted to us we will
      supply our die set units with pre-ground slots only.
      Combination spring/spacer units
      Strippers on FIBRO progression/lamination die set units are laid out for
      the functions of punch guiding and clamping of the stock, derived from
      preloaded spring/spacing units of highly compact design.
      The advantages of these compact units, in accordance with executions
      1 to 4, are as follows:
      a) compactness – the combination of both spring- and spacer functions
      saves die space
      b) ease of die maintenance – punch regrinding and replacement, as well
      as dimensional adaptation, can be done without dismantling of the
      stripper.
      Note: regrinding of punches = regrinding of spacer!
      c) ease of springs maintenance – after removal of only the top clamping
      plate, the complete spring/spacer unit can be taken out for replace-
      ment etc. This feature applies to executions 1 and 2 only.
      Top Bolster
      Stripper-Mounted Pillar
      Ring Nut
      Stripper
      Collar
      Bottom Bolster
      subject to alterations
      202.60.
      Ball Bearing
      Guide 2061.44.
      206.71.
      Stripper-Mounted Pillar
      Ball Bearing
      Guide 2061.44.
      206.71.
      Top Clamping Plate
      Top Bolster
      Combination Spring- and
      Spacer Unit 244.25./.40.
      Retainer Gib
      Thrust Plate
      Top Spacer
      (Compensation Disc)
      Punch Retainer Plate
      Clamping Stripper
      Bottom Spacer
      Bottom Bolster
      Bottom Clamping Plate
      Bunter Bar
      Clamping Area
      Progression Lamination Die Set Unit
      subject to alterations
      Progression lamination die set unit
      Die set units for progression/lamination dies
      The accuracy of a stamping die starts with the die set! When we designed
      these new units, special attention was paid to the stability and load capaci-
      ty of the guide pillars.
      The eventual introduction of the stripper-mounted pillar in its present form
      brought an eightfold increase in transverse load-carrying capacity relative
      to conventional pillars; under the same radial force, deflection is reduced
      to one-eigth.
      While modern high-speed presses have made ball bearing guides all but
      mandatory, the limited load capacity of these bearings remains a disad-
      vantage, calling for generous nominal pillar diameters and the use of more
      than two guide bearings.
      Considerable forces of inertia are encountered during the reversal of stro-
      king motion at speeds in excess of 500 SPM. In order to keep these harmful
      forces to a minimum, FIBRO Stripper-Mounted Pillars are provided with
      hollow cores.
      Considerations such as these formed the basis for the development of
      our new die set units with stripper-mounted pillars – a concept that has
      resulted in greatly improved accuracy, overall stability and speed capacity.
      Retaining slots for matrixes and
      guiding-stripper plate
      It is of paramount importance to the accuracy of the final die assembly
      that both these slots are in perfect vertical alignment, to within a few mm.
      From long experience we know that all heavy machining of die set
      apertures must precede the finish-machining of the two retainer slots for
      the matrix inserts and the guiding/clamping stripper plate.
      Whenever the machining of such apertures is not entrusted to us we will
      supply our die set units with pre-ground slots only.
      Combination spring/spacer units
      Strippers on FIBRO progression/lamination die set units are laid out for
      the functions of punch guiding and clamping of the stock, derived from
      preloaded spring/spacing units of highly compact design.
      The advantages of these compact units, in accordance with executions
      1 to 4, are as follows:
      a) compactness – the combination of both spring- and spacer functions
      saves die space
      b) ease of die maintenance – punch regrinding and replacement, as well
      as dimensional adaptation, can be done without dismantling of the
      stripper.
      Note: regrinding of punches = regrinding of spacer!
      c) ease of springs maintenance – after removal of only the top clamping
      plate, the complete spring/spacer unit can be taken out for replace-
      ment etc. This feature applies to executions 1 and 2 only.
      Top Bolster
      Stripper-Mounted Pillar
      Ring Nut
      Stripper
      Collar
      Bottom Bolster
      A49
      b 1 241.??.25.032 241.??.25.032
      b 1 a 2 3 b 2 b 3 14 15 16 14 15 16 17 14 15 16 17
      201.50. 1320. ??? . ??. ? 126 3 196 40 4 40 6,0 6,0 5,0 3 241 354 891 – 80,3 118,1 297 –
      201.50. 1620. ??? . ??. ? 156 3 196 50 4 50 6,0 6,0 5,0 3 241 354 891 – 80,3 118,1 297 –
      201.50. 2020. ??? . ??. ? 196 3 196 60 6 60 6,0 6,0 5,0 3 241 354 891 – 80,3 118,1 297 –
      201.50. 2520. ??? . ??. ? 246 3 196 75 8 75 6,0 6,0 5,0 3 241 354 891 – 80,3 118,1 297 –
      201.50. 3020. ??? . ??. ? 296 3 196 75 8 75 6,0 6,0 5,0 3 241 354 891 – 80,3 118,1 297 –
      subject to alterations
      201.50. Progression Lamination Die Set Unit
      Order No Spring ext. dims
      Comb.
      spring+
      spacer
      max. spring
      compr. (without
      pre load) (mm)
      241…
      spring
      preload
      preloading in N
      (per spring unit) spring coefficient “c” (N)
      Type Size Type Exec. max. unit (mm)
      Progression Lamination Die Set Unit
      a 2
      b 2
      20
      9
      16
      (240)
      202.60.019.
      8
      15
      62
      53 16
      246
      140
      90
      53
      32
      33
      15
      244.25.33
      * For the sizes 201.50.2520 and 3020 guide pillars 202.60.025
      b 3
      70
      2
      b 1 -0,05
      -0,10
      201.50.
      M 24x1,5
      M 24x1,5
      25
      25
      25
      16
      Executions
      201.50.
      ????.???.??.1
      with projecting top
      clamping plate
      201.50.
      ????.???.??.2
      with threaded hole in top clam-
      ping plate, for threaded shank
      201.50.
      ????.???.??.3
      with threaded hole in top bolster,
      for threaded shank
      201.50.
      ????.???.??.4
      with clamping pockets
      milled in top bolster
      (mounting of top bolster to ram of press)
      Ball Bearing Guides
      Guide Elements
      Width of slot b 1 to be determined by
      customer!
      2D-CAD data are available on request for each Die Set Unit.
      The designer need only draw the active die elements.
      Prints can be taken from this master.
      Ordering Code (example):
      Die Set Unit = 201.50.
      a 2 ⊗ b 2 = 296 ⊗ 196 = 3020.
      b 1 = 75 mm = 075.
      Springs (type) 241.15. = 15.
      With projecting top clamping plate = 1
      Order No = 201.50.3020.075.15.1
      Die Set Units 201.50. can also be supplied in special sizes
      as well as special executions, acc. to customers’ specifications.
      Die daylight and strip height can be reduced by up to 3 mm
      through a reduction in the thickness of the Bottom Clamping Plate.
      A50
      15
      8
      9
      b 2
      2
      a
      16
      20
      22
      16
      (250)
      63
      62 90
      63
      33
      296
      170
      15
      244.25.44
      202.60.025.
      b 3
      70
      2
      b 1 -0,05
      -0,10
      201.50.
      b 1 241.□□.25.045 241.□□.25.045
      b 1 a 2 × b 2 max. b 3 14 15 16 17 (mm) 14 15 16 17 14 15 16 17
      201.50. 1625. □□□. □□. □ 156 × 246 60 4 60 8,0 8,0 7,8 5,4 4 212 323 748 977 53 80,8 187 244,2
      201.50. 2025. □□□. □□. □ 196 × 246 75 6 75 8,0 8,0 7,8 5,4 4 212 323 748 977 53 80,8 187 244,2
      201.50. 2525. □□□. □□. □ 246 × 246 90 8 90 8,0 8,0 7,8 5,4 4 212 323 748 977 53 80,8 187 244,2
      201.50. 3025. □□□. □□. □ 296 × 246 100 8 100 8,0 8,0 7,8 5,4 4 212 323 748 977 53 80,8 187 244,2
      201.50. 3525. □□□. □□. □ 346 × 246 100 10 100 8,0 8,0 7,8 5,4 4 212 323 748 977 53 80,8 187 244,2
      = 201.50.
      a 2 ×b 2 = 296 × 246 = 3025.
      b 1 = 100 mm = 100.
      = 15.
      = 1
      = 201.50.3025.100.15.1
      subject to alterations
      Progression Lamination Die Set Unit
      M 24x1,5
      M 24x1,5
      25
      25
      25
      16
      Executions
      201.50.
      ????.???.??.1
      with projecting top
      clamping plate
      201.50.
      ????.???.??.2
      with threaded hole in top clam-
      ping plate, for threaded shank
      201.50.
      ????.???.??.3
      with threaded hole in
      top bolster, for threaded shank
      201.50.
      ????.???.??.4
      with clamping pockets milled
      in top bolster
      (mounting of top bolster to ram of press)
      Ball Bearing Guides
      Guide Elements
      Width of slot b 1 to be determined by
      customer!
      2D-CAD data are available on request for each Die Set Unit.
      The designer need only draw the active die elements.
      Prints can be taken from this master.
      201.50. Progression Lamination Die Set Unit
      Order No Spring ext. dims
      Comb.
      spring+
      spacer
      max. spring compr.
      (without pre load)
      (mm) 241…
      spring
      preload
      preloading in N
      (per spring unit)
      spring coefficient “c”
      (N)
      Type Size Type Exec. max. unit
      Ordering Code (example):
      Die Set Unit
      Springs (type) 241.15.
      With projecting top clamping plate
      Order No
      Die Set Units 201.50. can also be supplied in special sizes
      as well as special executions, acc. to customers’ specifications.
      Die daylight and strip height can be reduced by up to 16 mm
      through a reduction in the thickness of the Bottom Clamping Plate.
      b 1 241.??.25.032 241.??.25.032
      b 1 a 2 3 b 2 b 3 14 15 16 14 15 16 17 14 15 16 17
      201.50. 1320. ??? . ??. ? 126 3 196 40 4 40 6,0 6,0 5,0 3 241 354 891 – 80,3 118,1 297 –
      201.50. 1620. ??? . ??. ? 156 3 196 50 4 50 6,0 6,0 5,0 3 241 354 891 – 80,3 118,1 297 –
      201.50. 2020. ??? . ??. ? 196 3 196 60 6 60 6,0 6,0 5,0 3 241 354 891 – 80,3 118,1 297 –
      201.50. 2520. ??? . ??. ? 246 3 196 75 8 75 6,0 6,0 5,0 3 241 354 891 – 80,3 118,1 297 –
      201.50. 3020. ??? . ??. ? 296 3 196 75 8 75 6,0 6,0 5,0 3 241 354 891 – 80,3 118,1 297 –
      subject to alterations
      201.50. Progression Lamination Die Set Unit
      Order No Spring ext. dims
      Comb.
      spring+
      spacer
      max. spring
      compr. (without
      pre load) (mm)
      241…
      spring
      preload
      preloading in N
      (per spring unit) spring coefficient “c” (N)
      Type Size Type Exec. max. unit (mm)
      Progression Lamination Die Set Unit
      a 2
      b 2
      20
      9
      16
      (240)
      202.60.019.
      8
      15
      62
      53 16
      246
      140
      90
      53
      32
      33
      15
      244.25.33
      * For the sizes 201.50.2520 and 3020 guide pillars 202.60.025
      b 3
      70
      2
      b 1 -0,05
      -0,10
      201.50.
      M 24x1,5
      M 24x1,5
      25
      25
      25
      16
      Executions
      201.50.
      ????.???.??.1
      with projecting top
      clamping plate
      201.50.
      ????.???.??.2
      with threaded hole in top clam-
      ping plate, for threaded shank
      201.50.
      ????.???.??.3
      with threaded hole in top bolster,
      for threaded shank
      201.50.
      ????.???.??.4
      with clamping pockets
      milled in top bolster
      (mounting of top bolster to ram of press)
      Ball Bearing Guides
      Guide Elements
      Width of slot b 1 to be determined by
      customer!
      2D-CAD data are available on request for each Die Set Unit.
      The designer need only draw the active die elements.
      Prints can be taken from this master.
      Ordering Code (example):
      Die Set Unit = 201.50.
      a 2 ⊗ b 2 = 296 ⊗ 196 = 3020.
      b 1 = 75 mm = 075.
      Springs (type) 241.15. = 15.
      With projecting top clamping plate = 1
      Order No = 201.50.3020.075.15.1
      Die Set Units 201.50. can also be supplied in special sizes
      as well as special executions, acc. to customers’ specifications.
      Die daylight and strip height can be reduced by up to 3 mm
      through a reduction in the thickness of the Bottom Clamping Plate.
      15
      8
      9
      b 2
      2
      a
      16
      20
      22
      16
      (250)
      63
      62 90
      63
      33
      296
      170
      15
      244.25.44
      202.60.025.
      b 3
      70
      2
      b 1 -0,05
      -0,10
      201.50.
      b 1 241.□□.25.045 241.□□.25.045
      b 1 a 2 × b 2 max. b 3 14 15 16 17 (mm) 14 15 16 17 14 15 16 17
      201.50. 1625. □□□. □□. □ 156 × 246 60 4 60 8,0 8,0 7,8 5,4 4 212 323 748 977 53 80,8 187 244,2
      201.50. 2025. □□□. □□. □ 196 × 246 75 6 75 8,0 8,0 7,8 5,4 4 212 323 748 977 53 80,8 187 244,2
      201.50. 2525. □□□. □□. □ 246 × 246 90 8 90 8,0 8,0 7,8 5,4 4 212 323 748 977 53 80,8 187 244,2
      201.50. 3025. □□□. □□. □ 296 × 246 100 8 100 8,0 8,0 7,8 5,4 4 212 323 748 977 53 80,8 187 244,2
      201.50. 3525. □□□. □□. □ 346 × 246 100 10 100 8,0 8,0 7,8 5,4 4 212 323 748 977 53 80,8 187 244,2
      = 201.50.
      a 2 ×b 2 = 296 × 246 = 3025.
      b 1 = 100 mm = 100.
      = 15.
      = 1
      = 201.50.3025.100.15.1
      subject to alterations
      Progression Lamination Die Set Unit
      M 24x1,5
      M 24x1,5
      25
      25
      25
      16
      Executions
      201.50.
      ????.???.??.1
      with projecting top
      clamping plate
      201.50.
      ????.???.??.2
      with threaded hole in top clam-
      ping plate, for threaded shank
      201.50.
      ????.???.??.3
      with threaded hole in
      top bolster, for threaded shank
      201.50.
      ????.???.??.4
      with clamping pockets milled
      in top bolster
      (mounting of top bolster to ram of press)
      Ball Bearing Guides
      Guide Elements
      Width of slot b 1 to be determined by
      customer!
      2D-CAD data are available on request for each Die Set Unit.
      The designer need only draw the active die elements.
      Prints can be taken from this master.
      201.50. Progression Lamination Die Set Unit
      Order No Spring ext. dims
      Comb.
      spring+
      spacer
      max. spring compr.
      (without pre load)
      (mm) 241…
      spring
      preload
      preloading in N
      (per spring unit)
      spring coefficient “c”
      (N)
      Type Size Type Exec. max. unit
      Ordering Code (example):
      Die Set Unit
      Springs (type) 241.15.
      With projecting top clamping plate
      Order No
      Die Set Units 201.50. can also be supplied in special sizes
      as well as special executions, acc. to customers’ specifications.
      Die daylight and strip height can be reduced by up to 16 mm
      through a reduction in the thickness of the Bottom Clamping Plate.
      A51
      346
      210
      2
      a
      9
      16 20
      20
      38
      202.60.032.
      8 19
      71
      19
      100
      (282)
      73 73
      20
      b 2
      244.40.48
      b 3
      80
      2
      b 1 -0,05
      -0,10
      201.50.
      b 1 241.□□.25.045 241.□□.25.045
      b 1 a 2 × b 2 max. b 3 14 15 16 17 (mm) 14 15 16 17 14 15 16 17
      201.50. 2030. □□□. □□. □ 196 × 296 75 4 75 7,0 7,0 5,0 4,2 8 736 1432 2800 5027 92 179 350 628,4
      201.50. 2530. □□□. □□. □ 246 × 296 100 6 100 7,0 7,0 5,0 4,2 8 736 1432 2800 5027 92 179 350 628,4
      201.50. 3030. □□□. □□. □ 296 × 296 100 8 100 7,0 7,0 5,0 4,2 8 736 1432 2800 5027 92 179 350 628,4
      201.50. 3530. □□□. □□. □ 346 × 296 125 8 125 7,0 7,0 5,0 4,2 8 736 1432 2800 5027 92 179 350 628,4
      201.50. 4030. □□□. □□. □ 396 × 296 125 8 125 7,0 7,0 5,0 4,2 8 736 1432 2800 5027 92 179 350 628,4
      = 201.50.
      a 2 ×b 2 = 296 × 296 = 3030.
      b 1 = 100 mm = 100.
      = 15.
      = 1
      = 201.50.3030.100.15.1
      subject to alterations
      Progression Lamination Die Set Unit
      M 24x1,5
      M 24x1,5
      25
      25
      25
      16
      Executions
      201.50.
      ????.???.??.1
      with projecting top
      clamping plate
      201.50.
      ????.???.??.2
      with threaded hole in top clam-
      ping plate, for threaded shank
      201.50.
      ????.???.??.3
      with threaded hole in
      top bolster, for threaded shank
      201.50.
      ????.???.??.4
      with clamping pockets milled
      in top bolster
      (mounting of top bolster to ram of press)
      Ball Bearing Guides
      Guide Elements
      Width of slot b 1 to be determined by
      customer!
      2D-CAD data are available on request for each Die Set Unit.
      The designer need only draw the active die elements.
      Prints can be taken from this master.
      201.50. Progression Lamination Die Set Unit
      Order No Spring ext. dims
      Comb.
      spring+
      spacer
      max. spring compr.
      (without pre load)
      (mm) 241…
      spring
      preload
      preloading in N
      (per spring unit)
      spring coefficient “c”
      (N)
      Type Size Type Exec. max. unit
      Ordering Code (example):
      Die Set Unit
      Springs (type) 241.15.
      With projecting top clamping plate
      Order No
      Die Set Units 201.50. can also be supplied in special sizes
      as well as special executions, acc. to customers’ specifications.
      Die daylight and strip height can be reduced by up to 16 mm
      through a reduction in the thickness of the Bottom Clamping Plate.
      A52
      Tooling Pallet
      Die Sets
      346
      210
      2
      a
      9
      16 20
      20
      38
      202.60.032.
      8 19
      71
      19
      100
      (282)
      73 73
      20
      b 2
      244.40.48
      b 3
      80
      2
      b 1 -0,05
      -0,10
      201.50.
      b 1 241.□□.25.045 241.□□.25.045
      b 1 a 2 × b 2 max. b 3 14 15 16 17 (mm) 14 15 16 17 14 15 16 17
      201.50. 2030. □□□. □□. □ 196 × 296 75 4 75 7,0 7,0 5,0 4,2 8 736 1432 2800 5027 92 179 350 628,4
      201.50. 2530. □□□. □□. □ 246 × 296 100 6 100 7,0 7,0 5,0 4,2 8 736 1432 2800 5027 92 179 350 628,4
      201.50. 3030. □□□. □□. □ 296 × 296 100 8 100 7,0 7,0 5,0 4,2 8 736 1432 2800 5027 92 179 350 628,4
      201.50. 3530. □□□. □□. □ 346 × 296 125 8 125 7,0 7,0 5,0 4,2 8 736 1432 2800 5027 92 179 350 628,4
      201.50. 4030. □□□. □□. □ 396 × 296 125 8 125 7,0 7,0 5,0 4,2 8 736 1432 2800 5027 92 179 350 628,4
      = 201.50.
      a 2 ×b 2 = 296 × 296 = 3030.
      b 1 = 100 mm = 100.
      = 15.
      = 1
      = 201.50.3030.100.15.1
      subject to alterations
      Progression Lamination Die Set Unit
      M 24x1,5
      M 24x1,5
      25
      25
      25
      16
      Executions
      201.50.
      ????.???.??.1
      with projecting top
      clamping plate
      201.50.
      ????.???.??.2
      with threaded hole in top clam-
      ping plate, for threaded shank
      201.50.
      ????.???.??.3
      with threaded hole in
      top bolster, for threaded shank
      201.50.
      ????.???.??.4
      with clamping pockets milled
      in top bolster
      (mounting of top bolster to ram of press)
      Ball Bearing Guides
      Guide Elements
      Width of slot b 1 to be determined by
      customer!
      2D-CAD data are available on request for each Die Set Unit.
      The designer need only draw the active die elements.
      Prints can be taken from this master.
      201.50. Progression Lamination Die Set Unit
      Order No Spring ext. dims
      Comb.
      spring+
      spacer
      max. spring compr.
      (without pre load)
      (mm) 241…
      spring
      preload
      preloading in N
      (per spring unit)
      spring coefficient “c”
      (N)
      Type Size Type Exec. max. unit
      Ordering Code (example):
      Die Set Unit
      Springs (type) 241.15.
      With projecting top clamping plate
      Order No
      Die Set Units 201.50. can also be supplied in special sizes
      as well as special executions, acc. to customers’ specifications.
      Die daylight and strip height can be reduced by up to 16 mm
      through a reduction in the thickness of the Bottom Clamping Plate.
      Tooling Pallet
      Die Sets
      A53
      subject to alterations
      Fast Exchange System for Pallet Tooling
      Description
      The fast exchange of pallet-born tooling sets, with the concept of rapid
      mechanical positioning, meets the demands for:
      • lowering of tooling cost
      • reduction in setting costs
      • faster response to market trends.
      Instead of a multitude of complete die set-born press tools, the new
      system is based on a carrier die set with rapid-exchange features. This die
      set can remain in the press, while any number of tooling pallet sets can be
      accommodated expediently and precisely, one at a time.
      There are no individual guide elements associated with a tooling pallet set
      – the necessary guiding remains a function of the carrier die set exclusively.
      Tooling pallet sets are mounted to standard carrier plates – the top and
      bottom tooling simply slides into position, where a stop provides the
      positioning control, to allow entry of the locating pins upon the required
      half-turn of each of the four pin actuation levers on the die set. With the
      tooling pallets now positioned accurately, the hexagonal clamping screws
      at the front of the die set can be turned with a box spanner, each activating
      one clamp via an internal cam, moved by threading action of the screw. The
      cam angle is such that self-locking is obtained.
      Press Tool Types
      Sets of pallet tooling can be designed as:
      • combination progression tools
      • compound tools
      • draw dies
      • bending- and forming dies
      • combination tools etc.
      Setting and Tryout Aids
      The absence of individual guide elements is a fundamental feature of too-
      ling pallet sets which greatly assists the overall economy of the system. In
      order to facilitate the aligning of top- and bottom tooling, conical centring
      units can be fitted, thus providing alignment between both members by
      direct means – even outside the carrier die set, on the toolmaker’s bench.
      As a further aid for setting and tryout of pallet sets we offer the FIBRO
      Aligning- and Tryout Press Unit 201.98. with simplified but basically similar
      positioning- and locking features as the carrier die set.
      A54 subject to alterations
      Setting
      • slide each pallet into its position
      • positioning
      • clamping
      These steps can be completed in a minute.
      Slide-In Insertion
      Sheet Thicknesses
      Sheet less than 0,4 mm in thickness is normally not recommended for the
      system – on account of the smaller punch-to-die clearances associated
      with thin stock materials, where the normal positioning accuracy within
      the carrier die set (approximately 0,02 mm) becomes insufficient.
      However, through fitting of conical centring units the overall alignment
      accuracy can be improved to an extent where even sheet below 0,4 mm
      thickness can be processed successfully.
      Positioning
      Clamping
      Fast Exchange System for Pallet Tooling
      Positioning Aids
      Pallet tooling sets can be
      equipped with conical
      centring units.
      subject to alterations
      Fast Exchange System for Pallet Tooling
      Description
      The fast exchange of pallet-born tooling sets, with the concept of rapid
      mechanical positioning, meets the demands for:
      • lowering of tooling cost
      • reduction in setting costs
      • faster response to market trends.
      Instead of a multitude of complete die set-born press tools, the new
      system is based on a carrier die set with rapid-exchange features. This die
      set can remain in the press, while any number of tooling pallet sets can be
      accommodated expediently and precisely, one at a time.
      There are no individual guide elements associated with a tooling pallet set
      – the necessary guiding remains a function of the carrier die set exclusively.
      Tooling pallet sets are mounted to standard carrier plates – the top and
      bottom tooling simply slides into position, where a stop provides the
      positioning control, to allow entry of the locating pins upon the required
      half-turn of each of the four pin actuation levers on the die set. With the
      tooling pallets now positioned accurately, the hexagonal clamping screws
      at the front of the die set can be turned with a box spanner, each activating
      one clamp via an internal cam, moved by threading action of the screw. The
      cam angle is such that self-locking is obtained.
      Press Tool Types
      Sets of pallet tooling can be designed as:
      • combination progression tools
      • compound tools
      • draw dies
      • bending- and forming dies
      • combination tools etc.
      Setting and Tryout Aids
      The absence of individual guide elements is a fundamental feature of too-
      ling pallet sets which greatly assists the overall economy of the system. In
      order to facilitate the aligning of top- and bottom tooling, conical centring
      units can be fitted, thus providing alignment between both members by
      direct means – even outside the carrier die set, on the toolmaker’s bench.
      As a further aid for setting and tryout of pallet sets we offer the FIBRO
      Aligning- and Tryout Press Unit 201.98. with simplified but basically similar
      positioning- and locking features as the carrier die set.
      subject to alterations
      Setting
      • slide each pallet into its position
      • positioning
      • clamping
      These steps can be completed in a minute.
      Slide-In Insertion
      Sheet Thicknesses
      Sheet less than 0,4 mm in thickness is normally not recommended for the
      system – on account of the smaller punch-to-die clearances associated
      with thin stock materials, where the normal positioning accuracy within
      the carrier die set (approximately 0,02 mm) becomes insufficient.
      However, through fitting of conical centring units the overall alignment
      accuracy can be improved to an extent where even sheet below 0,4 mm
      thickness can be processed successfully.
      Positioning
      Clamping
      Fast Exchange System for Pallet Tooling
      Positioning Aids
      Pallet tooling sets can be
      equipped with conical
      centring units.
      A55
      subject to alterations
      Fast Exchange System for Pallet Tooling
      Top Bolster of Pallet Die Set
      1 top bolster
      2 pallet carrier plate – for slide-in insertion
      3 guide bushes – optionally sliding –
      or ball bearing guides
      4 clamp
      5 positioning pin – descends below surface
      6 positioning pin lever
      7 stop pin
      8 clamping screw
      Bottom Bolster of Pallet Die Set
      1 bottom bolster
      2 pallet carrier plate – for slide-in insertion
      3 guide pillar
      4 clamp
      5 positioning pin – descends below surface
      6 positioning pin lever
      7 stop pin
      8 clamping screw
      9 bolster insert plate
      10 box spanner
      A56
      a 2 a 3 a 4 a 5 b 2 b 3 b 4 c 1 c 2 c 3 d e y e 3 f f 2 f 3 h l 1
      201.95.1010. 100u100 350 300 80,5 – 200 60 80,5 40 40 16 25 220 120 260 168 113 93 29 160
      201.95.2121. 210u210 450 400 161 180,2 315 150 180,2 50 40 25 40 300 220 360 270 208 133 38 180
      201.95.3030. 300u300 550 500 241 270,5 420 220 250,5 63 40 25 40 380 320 460 365 305 185 38 180
      201.95.3521. 350u210 600 550 320 – 315 120 150 50 40 25 40 450 370 510 270 208 133 38 180
      b
      3
      f
      f
      2
      b
      3
      c
      2
      c
      1
      c
      h h
      1 l
      M 30 x 2
      e
      4
      a
      5
      a
      3
      e
      y
      2
      a
      3
      a
      a
      2
      f
      3
      b
      4
      b
      d d
      30
      201.95.
      subject to alterations
      201.95. Fast Exchange System for Pallet Tooling
      Order No
      Type of
      guides*
      work area
      a u b a 2 a 3 a 4 a 5 b 2 b 3 b 4 c 1 c 2 c 3 d e y e 3 f f 2 f 3 h l 1
      * Type of guides: 831 for sliding guides or 862 for ball guides
      Fast Exchange System for Pallet Tooling
      subject to alterations
      Fast Exchange System for Pallet Tooling
      Top Bolster of Pallet Die Set
      1 top bolster
      2 pallet carrier plate – for slide-in insertion
      3 guide bushes – optionally sliding –
      or ball bearing guides
      4 clamp
      5 positioning pin – descends below surface
      6 positioning pin lever
      7 stop pin
      8 clamping screw
      Bottom Bolster of Pallet Die Set
      1 bottom bolster
      2 pallet carrier plate – for slide-in insertion
      3 guide pillar
      4 clamp
      5 positioning pin – descends below surface
      6 positioning pin lever
      7 stop pin
      8 clamping screw
      9 bolster insert plate
      10 box spanner
      a 2 a 3 a 4 a 5 b 2 b 3 b 4 c 1 c 2 c 3 d e y e 3 f f 2 f 3 h l 1
      201.95.1010. 100u100 350 300 80,5 – 200 60 80,5 40 40 16 25 220 120 260 168 113 93 29 160
      201.95.2121. 210u210 450 400 161 180,2 315 150 180,2 50 40 25 40 300 220 360 270 208 133 38 180
      201.95.3030. 300u300 550 500 241 270,5 420 220 250,5 63 40 25 40 380 320 460 365 305 185 38 180
      201.95.3521. 350u210 600 550 320 – 315 120 150 50 40 25 40 450 370 510 270 208 133 38 180
      b
      3
      f
      f
      2
      b
      3
      c
      2
      c
      1
      c
      h h
      1 l
      M 30 x 2
      e
      4
      a
      5
      a
      3
      e
      y
      2
      a
      3
      a
      a
      2
      f
      3
      b
      4
      b
      d d
      30
      201.95.
      subject to alterations
      201.95. Fast Exchange System for Pallet Tooling
      Order No
      Type of
      guides*
      work area
      a u b a 2 a 3 a 4 a 5 b 2 b 3 b 4 c 1 c 2 c 3 d e y e 3 f f 2 f 3 h l 1
      * Type of guides: 831 for sliding guides or 862 for ball guides
      Fast Exchange System for Pallet Tooling
      A57
      a 4 a 5 b 3 b 4 c 1 h 1
      201.97.1010 100 ⊗ 100 80 – 60 80 40 20
      201.97.2121 210 ⊗ 210 160 180 150 180 50 25
      201.97.3030 300 ⊗ 300 240 270 220 250 63 30
      201.97.3521 350 ⊗ 210 320 – 120 150 50 25
      a 2 b 2 c 3 x y z
      201.96.1010 100 u 100 150 115 16 50,1 120 130
      201.96.2121 210 u 210 250 225 25 160,1 220 230
      201.96.3030 300 u 300 350 315 25 250,1 320 330
      201.96.3521 350 u 210 400 225 25 160,1 370 380
      subject to alterations
      201.97. Bolster Insert Plate
      Order No
      work area
      a ⊗ b
      201.96. Pallet Carrier Plate
      Order No
      work area
      a ⊗ b
      Pallet Carrier Plate
      Bolster Insert Plate
      Pallet Carrier Plates
      For each pallet tooling set, two carrier plates
      201.96. are required – one for mounting the top
      tooling details, the other for the bottom tooling.
      The tooling components are dowelled into
      position.
      10
      3
      c
      z
      a
      y
      2
      a
      2
      b
      x
      b
      H7
      ø16
      R5
      work area
      201.96.
      Bolster Insert Plates
      This insert plate has to be added to a tooling
      pallet set if:
      • scrap holes near the centre require additional
      support
      • spring cushions or bottom ejectors have to be
      employed
      • other features of specific die designs require
      an individual insert plate
      Bolster insert plates have a dowel that makes
      them non-reversible.
      non-reversing dowel
      h
      1
      c
      4
      a
      5
      a
      3
      b
      4
      b
      1
      201.97.
      A58
      a 2 b 2
      201.98.1010.863 100 ⊗ 100 315 250
      201.98.3030.863 210 ⊗ 210 630 315
      201.98.3030.863 300 ⊗ 300 630 315
      201.98.3030.863 350 ⊗ 210 630 315
      subject to alterations
      201.98. Aligning- and Tryout Press Unit
      Order No
      work area
      a ⊗ b
      ±2 ±2 ±2
      50 50 220 b
      2
      a
      a
      2
      b
      200
      hydraulic jack
      ø40
      50
      201.98.
      Aligning- and Tryout Press Unit
      Description
      These press units have manual actuation by
      way of a hydraulic jack which forces the guided
      bolster upwards. In the toolroom they serve as
      tryout- and setting press, especially for tooling
      pallet sets. For the latter purpose they are
      equipped with simplified but functionally similar
      features for positioning and clamping as those in
      FIBRO Tooling Pallet Die Sets.
      Moreover the press units provide ideal facilities
      for the press-fitting of pillars and bushes etc. – or
      their removal. For blueing-in and tryout of all
      sorts of press tools they soon prove themselves
      as an indispensable workshop facility, with a
      maximum thrust of 10 tons.
      Material:
      Plate: St 52-2
      Execution:
      Headed ball bearing guide bushes,
      hydraulic jack, 10 tons capacity
      a 4 a 5 b 3 b 4 c 1 h 1
      201.97.1010 100 ⊗ 100 80 – 60 80 40 20
      201.97.2121 210 ⊗ 210 160 180 150 180 50 25
      201.97.3030 300 ⊗ 300 240 270 220 250 63 30
      201.97.3521 350 ⊗ 210 320 – 120 150 50 25
      a 2 b 2 c 3 x y z
      201.96.1010 100 u 100 150 115 16 50,1 120 130
      201.96.2121 210 u 210 250 225 25 160,1 220 230
      201.96.3030 300 u 300 350 315 25 250,1 320 330
      201.96.3521 350 u 210 400 225 25 160,1 370 380
      subject to alterations
      201.97. Bolster Insert Plate
      Order No
      work area
      a ⊗ b
      201.96. Pallet Carrier Plate
      Order No
      work area
      a ⊗ b
      Pallet Carrier Plate
      Bolster Insert Plate
      Pallet Carrier Plates
      For each pallet tooling set, two carrier plates
      201.96. are required – one for mounting the top
      tooling details, the other for the bottom tooling.
      The tooling components are dowelled into
      position.
      10
      3
      c
      z
      a
      y
      2
      a
      2
      b
      x
      b
      H7
      ø16
      R5
      work area
      201.96.
      Bolster Insert Plates
      This insert plate has to be added to a tooling
      pallet set if:
      • scrap holes near the centre require additional
      support
      • spring cushions or bottom ejectors have to be
      employed
      • other features of specific die designs require
      an individual insert plate
      Bolster insert plates have a dowel that makes
      them non-reversible.
      non-reversing dowel
      h
      1
      c
      4
      a
      5
      a
      3
      b
      4
      b
      1
      201.97.
      a 2 b 2
      201.98.1010.863 100 ⊗ 100 315 250
      201.98.3030.863 210 ⊗ 210 630 315
      201.98.3030.863 300 ⊗ 300 630 315
      201.98.3030.863 350 ⊗ 210 630 315
      subject to alterations
      201.98. Aligning- and Tryout Press Unit
      Order No
      work area
      a ⊗ b
      ±2 ±2 ±2
      50 50 220 b
      2
      a
      a
      2
      b
      200
      hydraulic jack
      ø40
      50
      201.98.
      Aligning- and Tryout Press Unit
      Description
      These press units have manual actuation by
      way of a hydraulic jack which forces the guided
      bolster upwards. In the toolroom they serve as
      tryout- and setting press, especially for tooling
      pallet sets. For the latter purpose they are
      equipped with simplified but functionally similar
      features for positioning and clamping as those in
      FIBRO Tooling Pallet Die Sets.
      Moreover the press units provide ideal facilities
      for the press-fitting of pillars and bushes etc. – or
      their removal. For blueing-in and tryout of all
      sorts of press tools they soon prove themselves
      as an indispensable workshop facility, with a
      maximum thrust of 10 tons.
      Material:
      Plate: St 52-2
      Execution:
      Headed ball bearing guide bushes,
      hydraulic jack, 10 tons capacity
      A59
      A
      B
      C
      D
      E
      F
      G
      H
      J
      K
      L
      Die Sets
      Precision Ground Plates and Flat Bars
      Lifting and Clamping Devices
      Guide elements
      Ground Precision Components
      Springs
      Elastomer-Bars, -Sheets, -Sections
      FIBRO Chemical Tooling Aids
      Peripheral Equipment
      Cam Units
      Standard Parts for Mould Making
      Precision Ground Plates and Flat Bars
      Steel and aluminium plates, flat and square tool steels
      Precision feeler gauges, foil shims
      Precision Ground
      Plates
      and Flat Bars
      B2
      Precision Ground
      Plates
      and Flat Bars
      Contents
      subject to alterations
      2900.
      Steel plate ISO 6753-1
      2910.
      Aluminium plate ~ISO 6753-1
      2922.1730.
      Precision flat and square bar steel,
      ~DIN 59350
      2923.0570.
      Precision flat and square bar steel
      with machining allowance,
      DIN 59350
      2923.2099.
      Precision flat and square bar steel
      with machining allowance,
      DIN 59350
      2923.2162.
      Precision flat and square bar steel
      with machining allowance,
      DIN 59350
      2923.2312.
      Precision flat and square bar steel
      with machining allowance,
      DIN 59350
      2923.2343.
      Precision flat and square bar steel
      with machining allowance,
      DIN 59350
      2923.2363.
      Precision flat and square bar steel
      with machining allowance,
      DIN 59350
      2923.2379.
      Precision flat and square bar steel
      with machining allowance,
      DIN 59350
      2923.2436.
      Precision flat and square bar steel
      with machining allowance,
      DIN 59350
      2923.2767.
      Precision flat and square bar steel
      with machining allowance,
      DIN 59350
      2922.2842.
      Precision flat and square bar steel,
      DIN 59350
      2923.2842.
      Precision flat and square bar steel
      with machining allowance,
      DIN 59350
      2925.
      Precision feeler gauge
      B4
      B6
      B7
      B8
      B9
      B10
      B11
      B12
      B13
      B14
      B15
      B16
      B17
      B18
      B19
      B20
      subject to alterations B5
      subject to alterations
      Steel plate ISO 6753-1
      2900.
      Execution:
      External contours milled. Thickness surfaces ground
      Note:
      l or b ≤ 630 = +0,2 / +0,4
      l or b > 630 = +0,2 / +0,6
      Plates from 500 ⊗ 500 mm on are manufactured with lifting thread.
      B6
      2900.
      Order No
      Size
      l x b x t Order No
      Size
      l x b x t Order No
      Size
      l x b x t
      2900.1608.25 160 x 80 x 25 2900.3120.40 315 x 200 x 40 2900.6340.32 630 x 400 x 32
      2900.1608.32 160 x 80 x 32 2900.3120.50 315 x 200 x 50 2900.6340.40 630 x 400 x 40
      2900.1610.25 160 x 100 x 25 2900.3125.32 315 x 250 x 32 2900.6340.50 630 x 400 x 50
      2900.1610.32 160 x 100 x 32 2900.3125.40 315 x 250 x 40 2900.6340.63 630 x 400 x 63
      2900.1612.25 160 x 125 x 25 2900.3125.50 315 x 250 x 50 2900.6350.32 630 x 500 x 32
      2900.1612.32 160 x 125 x 32 2900.3131.32 315 x 315 x 32 2900.6350.40 630 x 500 x 40
      2900.1616.25 160 x 160 x 25 2900.3131.40 315 x 315 x 40 2900.6350.50 630 x 500 x 50
      2900.1616.32 160 x 160 x 32 2900.3131.50 315 x 315 x 50 2900.6350.63 630 x 500 x 63
      2900.2010.25 200 x 100 x 25 2900.4020.32 400 x 200 x 32 2900.6363.32 630 x 630 x 32
      2900.2010.32 200 x 100 x 32 2900.4020.40 400 x 200 x 40 2900.6363.40 630 x 630 x 40
      2900.2010.40 200 x 100 x 40 2900.4020.50 400 x 200 x 50 2900.6363.50 630 x 630 x 50
      2900.2012.25 200 x 125 x 25 2900.4025.32 400 x 250 x 32 2900.6363.63 630 x 630 x 63
      2900.2012.32 200 x 125 x 32 2900.4025.40 400 x 250 x 40 2900.7140.32 710 x 400 x 32
      2900.2012.40 200 x 125 x 40 2900.4025.50 400 x 250 x 50 2900.7140.40 710 x 400 x 40
      2900.2016.25 200 x 160 x 25 2900.4031.32 400 x 315 x 32 2900.7140.50 710 x 400 x 50
      2900.2016.32 200 x 160 x 32 2900.4031.40 400 x 315 x 40 2900.7140.63 710 x 400 x 63
      2900.2016.40 200 x 160 x 40 2900.4031.50 400 x 315 x 50 2900.7150.32 710 x 500 x 32
      2900.2020.25 200 x 200 x 25 2900.4040.32 400 x 400 x 32 2900.7150.40 710 x 500 x 40
      2900.2020.32 200 x 200 x 32 2900.4040.40 400 x 400 x 40 2900.7150.50 710 x 500 x 50
      2900.2020.40 200 x 200 x 40 2900.4040.50 400 x 400 x 50 2900.7150.63 710 x 500 x 63
      2900.2512.25 250 x 125 x 25 2900.5025.32 500 x 250 x 32 2900.7163.32 710 x 630 x 32
      2900.2512.32 250 x 125 x 32 2900.5025.40 500 x 250 x 40 2900.7163.40 710 x 630 x 40
      2900.2512.40 250 x 125 x 40 2900.5025.50 500 x 250 x 50 2900.7163.50 710 x 630 x 50
      2900.2516.25 250 x 160 x 25 2900.5031.32 500 x 315 x 32 2900.7163.63 710 x 630 x 63
      2900.2516.32 250 x 160 x 32 2900.5031.40 500 x 315 x 40 2900.8040.32 800 x 400 x 32
      2900.2516.40 250 x 160 x 40 2900.5031.50 500 x 315 x 50 2900.8040.40 800 x 400 x 40
      2900.2520.25 250 x 200 x 25 2900.5040.32 500 x 400 x 32 2900.8040.50 800 x 400 x 50
      2900.2520.32 250 x 200 x 32 2900.5040.40 500 x 400 x 40 2900.8040.63 800 x 400 x 63
      2900.2520.40 250 x 200 x 40 2900.5040.50 500 x 400 x 50 2900.8050.32 800 x 500 x 32
      2900.2525.25 250 x 250 x 25 2900.5050.32 500 x 500 x 32 2900.8050.40 800 x 500 x 40
      2900.2525.32 250 x 250 x 32 2900.5050.40 500 x 500 x 40 2900.8050.50 800 x 500 x 50
      2900.2525.40 250 x 250 x 40 2900.5050.50 500 x 500 x 50 2900.8050.63 800 x 500 x 63
      2900.3116.32 315 x 160 x 32 2900.6331.32 630 x 315 x 32 2900.8063.32 800 x 630 x 32
      2900.3116.40 315 x 160 x 40 2900.6331.40 630 x 315 x 40 2900.8063.40 800 x 630 x 40
      2900.3116.50 315 x 160 x 50 2900.6331.50 630 x 315 x 50 2900.8063.50 800 x 630 x 50
      2900.3120.32 315 x 200 x 32 2900.6331.63 630 x 315 x 63 2900.8063.63 800 x 630 x 63
      Steel plate ISO 6753-1
      subject to alterations
      Aluminium plate ~ISO 6753-1
      2910. .2
      Execution:
      2910.□□□□.□□.2
      Two external contours milled. Thickness surfaces ground.
      Note:
      Plates from 500 ⊗ 500 mm on are manufactured with lifting thread.
      2910. .0
      Execution:
      2910.□□□□.□□.0
      External contours sawed. Thickness surfaces ground.
      Note:
      Plates from 500 ⊗ 500 mm on are manufactured with lifting thread.
      B7
      2910.
      Order No
      Size
      l x b x t Order No
      Size
      l x b x t Order No
      Size
      l x b x t Order No
      Size
      l x b x t
      2910.1608.25.□ 160 x 80 x 25 2910.2520.32.□ 250 x 200 x 32 2910.4040.40.□ 400 x 400 x 40 2910.6363.40.□ 630 x 630 x 40
      2910.1608.32.□ 160 x 80 x 32 2910.2520.40.□ 250 x 200 x 40 2910.4040.50.□ 400 x 400 x 50 2910.6363.50.□ 630 x 630 x 50
      2910.1610.25.□ 160 x 100 x 25 2910.2525.25.□ 250 x 250 x 25 2910.5025.32.□ 500 x 250 x 32 2910.6363.63.□ 630 x 630 x 63
      2910.1610.32.□ 160 x 100 x 32 2910.2525.32.□ 250 x 250 x 32 2910.5025.40.□ 500 x 250 x 40 2910.7140.32.□ 710 x 400 x 32
      2910.1612.25.□ 160 x 125 x 25 2910.2525.40.□ 250 x 250 x 40 2910.5025.50.□ 500 x 250 x 50 2910.7140.40.□ 710 x 400 x 40
      2910.1612.32.□ 160 x 125 x 32 2910.3116.32.□ 315 x 160 x 32 2910.5031.32.□ 500 x 315 x 32 2910.7140.50.□ 710 x 400 x 50
      2910.1616.25.□ 160 x 160 x 25 2910.3116.40.□ 315 x 160 x 40 2910.5031.40.□ 500 x 315 x 40 2910.7140.63.□ 710 x 400 x 63
      2910.1616.32.□ 160 x 160 x 32 2910.3116.50.□ 315 x 160 x 50 2910.5031.50.□ 500 x 315 x 50 2910.7150.32.□ 710 x 500 x 32
      2910.2010.25.□ 200 x 100 x 25 2910.3120.32.□ 315 x 200 x 32 2910.5040.32.□ 500 x 400 x 32 2910.7150.40.□ 710 x 500 x 40
      2910.2010.32.□ 200 x 100 x 32 2910.3120.40.□ 315 x 200 x 40 2910.5040.40.□ 500 x 400 x 40 2910.7150.50.□ 710 x 500 x 50
      2910.2010.40.□ 200 x 100 x 40 2910.3120.50.□ 315 x 200 x 50 2910.5040.50.□ 500 x 400 x 50 2910.7150.63.□ 710 x 500 x 63
      2910.2012.25.□ 200 x 125 x 25 2910.3125.32.□ 315 x 250 x 32 2910.5050.32.□ 500 x 500 x 32 2910.7163.32.□ 710 x 630 x 32
      2910.2012.32.□ 200 x 125 x 32 2910.3125.40.□ 315 x 250 x 40 2910.5050.40.□ 500 x 500 x 40 2910.7163.40.□ 710 x 630 x 40
      2910.2012.40.□ 200 x 125 x 40 2910.3125.50.□ 315 x 250 x 50 2910.5050.50.□ 500 x 500 x 50 2910.7163.50.□ 710 x 630 x 50
      2910.2016.25.□ 200 x 160 x 25 2910.3131.32.□ 315 x 315 x 32 2910.6331.32.□ 630 x 315 x 32 2910.7163.63.□ 710 x 630 x 63
      2910.2016.32.□ 200 x 160 x 32 2910.3131.40.□ 315 x 315 x 40 2910.6331.40.□ 630 x 315 x 40 2910.8040.32.□ 800 x 400 x 32
      2910.2016.40.□ 200 x 160 x 40 2910.3131.50.□ 315 x 315 x 50 2910.6331.50.□ 630 x 315 x 50 2910.8040.40.□ 800 x 400 x 40
      2910.2020.25.□ 200 x 200 x 25 2910.4020.32.□ 400 x 200 x 32 2910.6331.63.□ 630 x 315 x 63 2910.8040.50.□ 800 x 400 x 50
      2910.2020.32.□ 200 x 200 x 32 2910.4020.40.□ 400 x 200 x 40 2910.6340.32.□ 630 x 400 x 32 2910.8040.63.□ 800 x 400 x 63
      2910.2020.40.□ 200 x 200 x 40 2910.4020.50.□ 400 x 200 x 50 2910.6340.40.□ 630 x 400 x 40 2910.8050.32.□ 800 x 500 x 32
      2910.2512.25.□ 250 x 125 x 25 2910.4025.32.□ 400 x 250 x 32 2910.6340.50.□ 630 x 400 x 50 2910.8050.40.□ 800 x 500 x 40
      2910.2512.32.□ 250 x 125 x 32 2910.4025.40.□ 400 x 250 x 40 2910.6340.63.□ 630 x 400 x 63 2910.8050.50.□ 800 x 500 x 50
      2910.2512.40.□ 250 x 125 x 40 2910.4025.50.□ 400 x 250 x 50 2910.6350.32.□ 630 x 500 x 32 2910.8050.63.□ 800 x 500 x 63
      2910.2516.25.□ 250 x 160 x 25 2910.4031.32.□ 400 x 315 x 32 2910.6350.40.□ 630 x 500 x 40 2910.8063.32.□ 800 x 630 x 32
      2910.2516.32.□ 250 x 160 x 32 2910.4031.40.□ 400 x 315 x 40 2910.6350.50.□ 630 x 500 x 50 2910.8063.40.□ 800 x 630 x 40
      2910.2516.40.□ 250 x 160 x 40 2910.4031.50.□ 400 x 315 x 50 2910.6350.63.□ 630 x 500 x 63 2910.8063.50.□ 800 x 630 x 50
      2910.2520.25.□ 250 x 200 x 25 2910.4040.32.□ 400 x 400 x 32 2910.6363.32.□ 630 x 630 x 32 2910.8063.63.□ 800 x 630 x 63
      Aluminium plate ~ISO 6753-1
      Ordering Code (example):
      Aluminium plate ~ISO 6753-1 =2910.
      Length L 160 mm = 16
      Width B 80 mm = 08.
      Thickness T 25 mm = 25.
      Execution FORM sawn = 0
      Order No =2910. 1608. 25.0
      subject to alterations
      Precision flat and square bar steel, ~DIN 59350
      b +0,2
      +30
      1000
      s +0,2
      2922.1730.
      we deliver
      original
      quality
      Material:
      1.1730 / C45U
      Unalloyed tool steel
      Execution:
      Thickness precision ground, width ground or milled, length machined
      B8
      s 4 5 6 8 10 12 15 16 20 25 30 32 40 50 60 63 70 80 100 120 150
      b
      10 ●
      12 ●
      15 ●
      16 ●
      20 ● ● ● ● ● ● ● ● ●
      25 ● ● ● ● ● ● ● ● ● ●
      30 ● ● ● ● ● ● ● ● ● ●
      32 ● ● ● ● ● ● ● ● ● ●
      40 ● ● ● ● ● ● ● ● ● ● ● ● ●
      50 ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      60 ● ● ● ● ● ● ● ● ● ● ● ● ●
      63 ● ● ● ● ● ● ● ● ● ● ●
      70 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      80 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      90 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      100 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      120 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      125 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      140 ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      150 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      160 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      180 ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      200 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      250 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      300 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      350 ● ● ● ● ● ● ● ● ● ● ●
      400 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      450 ● ● ● ●
      500 ● ● ● ●
      Ordering Code (example):
      Precision flat and square bar steel, ~DIN 59350 =2922.1730.
      Width B 10 mm = 010.
      Thickness S 10 mm = 010.
      Length L 1000 mm = 1000
      Order No =2922.1730. 010. 010. 1000
      2922.1730. Precision flat and square bar steel, ~DIN 59350
      subject to alterations
      Precision flat and square bar steel with machining allowance, DIN 59350
      Material:
      1.0570 / St 52-3
      Non-alloyed construction steel
      Execution:
      Thickness precision ground, width ground or milled, length machined
      b +0,2
      +30
      1000
      s +0,2
      2923.0570.
      we deliver
      original
      quality
      B9
      s 5.2 6.2 8.2 10.4 12.4 15.4 20.4 25.4 30.4 40.4 50.4 60.4 70.4 80.4 100.4
      b
      10.4 ●
      12.4 ●
      15.4 ●
      20.3 ● ● ● ● ●
      20.4 ●
      25.3 ● ● ● ● ● ● ●
      25.4 ●
      30.3 ● ● ● ● ● ● ● ●
      30.4 ●
      40.3 ● ● ● ● ● ● ● ● ●
      40.4 ●
      50.3 ● ● ● ● ● ● ● ● ● ●
      50.4 ●
      60.3 ● ● ● ● ● ● ● ● ● ● ●
      60.4 ●
      70.3 ● ● ● ● ● ● ● ● ●
      70.4 ●
      80.3 ● ● ● ● ● ● ● ● ● ● ● ● ●
      80.4 ●
      100.3 ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      100.4 ●
      120.3 ● ● ● ● ● ● ● ● ● ● ● ● ●
      125.3 ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      140.3 ● ● ● ● ● ● ● ● ● ● ● ● ●
      150.3 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      160.3 ● ● ● ● ● ● ● ● ● ● ● ● ●
      180.3 ● ● ● ● ● ● ● ● ● ●
      200.3 ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      250.3 ● ● ● ● ● ● ● ● ● ● ● ● ●
      300.3 ● ● ● ● ● ● ● ● ● ● ● ●
      350.3 ● ● ● ● ● ● ● ● ● ●
      400.3 ● ● ● ● ● ● ●
      Ordering Code (example):
      Precision flat and square bar steel with machining allowance, DIN 59350 =2923.0570.
      Width B 10.4 mm = 010.
      Thickness S 10.4 mm = 010.
      Length L 1000 mm = 1000
      Order No =2923.0570. 010. 010. 1000
      2923.0570. Precision flat and square bar steel with machining allowance, DIN 59350
      subject to alterations
      Precision flat and square bar steel with machining allowance, DIN 59350
      b +0,2
      +5
      500
      s +0,2
      2923.2099.
      we deliver
      original
      quality
      Material:
      1.2099 / X5 CrS 12
      Stainless steel for plastic moulding,
      tempered to 900-1050 N/mm²
      Execution:
      Thickness precision ground, width ground or milled, length machined
      B10
      s 6.2 8.2 10.4 15.4 20.4 25.4 30.4 40.4 50.4
      b
      20.3 ● ● ●
      25.3 ● ● ● ●
      30.3 ● ● ● ● ●
      40.3 ● ● ● ● ● ●
      50.3 ● ● ● ● ● ● ●
      60.3 ● ● ● ● ● ● ● ●
      80.3 ● ● ● ● ● ● ● ● ●
      100.3 ● ● ● ● ● ● ● ● ●
      125.3 ● ● ● ● ● ● ● ● ●
      150.3 ● ● ● ● ● ● ● ● ●
      200.3 ● ● ● ● ● ● ● ● ●
      250.3 ● ● ● ● ● ● ● ●
      300.3 ● ● ● ● ● ● ● ●
      Ordering Code (example):
      Precision flat and square bar steel with machining allowance, DIN 59350 =2923.2099.
      Width B 20.3 mm = 020.
      Thickness S 6.2 mm = 006.
      Length L 500 mm = 0500
      Order No =2923.2099. 020. 006. 0500
      2923.2099. Precision flat and square bar steel with machining allowance, DIN 59350
      subject to alterations
      Precision flat and square bar steel with machining allowance, DIN 59350
      Material:
      1.2162 / 21 MnCr 5
      Case hardened steel
      Execution:
      Thickness precision ground, width ground or milled, length machined
      b +0,2
      +30
      1000
      s +0,2
      2923.2162.
      we deliver
      original
      quality
      B11
      s 8.2 10.4 12.4 15.4 20.4 25.4 30.4 40.4 50.4 60.4 80.4
      b
      20.3 ● ● ● ●
      20.4 ●
      25.3 ● ● ● ● ●
      25.4 ●
      30.3 ● ● ● ● ● ●
      30.4 ●
      40.3 ● ● ● ● ● ● ●
      40.4 ●
      50.3 ● ● ● ● ● ● ● ●
      50.4 ●
      60.3 ● ● ● ● ● ● ● ● ●
      60.4 ●
      70.3 ● ● ● ● ● ● ● ● ● ●
      80.3 ● ● ● ● ● ● ● ● ● ●
      80.4 ●
      100.3 ● ● ● ● ● ● ● ● ● ●
      150.3 ● ● ● ● ● ● ● ● ● ●
      200.3 ● ● ● ● ● ● ● ● ● ●
      250.3 ● ● ● ● ● ● ● ● ● ●
      300.3 ● ● ● ● ●
      Ordering Code (example):
      Precision flat and square bar steel with machining allowance, DIN 59350 =2923.2162.
      Width B 20.4 mm = 020.
      Thickness S 20.4 mm = 020.
      Length L 1000 mm = 1000
      Order No =2923.2162. 020. 020. 1000
      2923.2162. Precision flat and square bar steel with machining allowance, DIN 59350
      subject to alterations
      Precision flat and square bar steel with machining allowance, DIN 59350
      b +0,2
      +30
      1000
      s +0,2
      2923.2312.
      we deliver
      original
      quality
      Material:
      1.2312 / 40 CrMnMoS 8-6
      Steel for plastic moulding, pre-tempered to 900-1050 N/mm²
      Execution:
      Thickness precision ground, width ground or milled, length machined
      B12
      s 4.2 5.2 6.2 8.2 10.4 12.4 15.4 16.4 20.4 25.4 30.4 32.4 40.4 50.4 60.4 70.4 80.4 90.4 100.4
      b
      12.4 ●
      15.4 ●
      16.4 ●
      20.3 ● ● ● ●
      20.4 ●
      25.3 ● ● ● ● ● ●
      25.4 ●
      30.3 ● ● ● ● ● ● ●
      30.4 ●
      32.3 ● ● ● ●
      32.4 ●
      40.3 ● ● ● ● ● ● ● ● ● ● ●
      40.4 ●
      50.3 ● ● ● ● ● ● ● ● ● ● ● ● ●
      50.4 ●
      60.3 ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      60.4 ●
      63.3 ● ● ● ● ● ● ● ● ● ● ● ●
      70.3 ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      70.4 ●
      80.3 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      80.4 ●
      100.3 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      100.4 ●
      125.3 ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      150.3 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      200.3 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      220.3 ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      250.3 ● ● ● ● ● ● ● ● ● ● ●
      300.3 ● ● ● ● ● ● ● ● ● ●
      Ordering Code (example):
      Precision flat and square bar steel with machining allowance, DIN 59350 =2923.2312.
      Width B 12.4 mm = 012.
      Thickness S 12.4 mm = 012.
      Length L 1000 mm = 1000
      Order No =2923.2312. 012.012.1000
      2923.2312. Precision flat and square bar steel with machining allowance, DIN 59350
      subject to alterations
      Precision flat and square bar steel with machining allowance, DIN 59350
      Material:
      1.2343 / X 37 CrMoV 5-1
      Hot work steel
      Execution:
      Thickness precision ground, width ground or milled, length machined
      Note:
      ● = available in 500 mm and 1000 mm lengths
      ○ = only available in 500 mm lengths
      ■ = only available in 1000 mm lengths
      b +0,2
      +30
      / 1000
      +5
      500
      s +0,2
      2923.2343.
      we deliver
      original
      quality
      B13
      s 4.2 5.2 6.2 8.2 10.4 12.4 15.4 16.4 20.4 25.4 30.4 32.4 40.4 50.4 60.4 80.4 100.4
      b
      10.3 ○ ○ ○ ○
      10.4 ○
      12.4 ○
      15.3 ○ ○ ○ ○ ○ ○
      15.4 ○
      20.3 ○ ○ ○ ● ● ● ● ■
      20.4 ●
      25.3 ○ ○ ○ ● ● ● ● ■ ●
      25.4 ●
      30.3 ○ ○ ○ ● ● ● ● ● ●
      30.4 ●
      32.3 ■
      40.3 ○ ○ ○ ● ● ● ● ■ ● ● ● ■
      40.4 ●
      50.3 ○ ○ ○ ● ● ● ● ■ ● ● ● ■ ●
      50.4 ●
      60.3 ○ ○ ○ ● ● ● ● ● ● ● ● ●
      60.4 ●
      63.3 ■ ■
      80.3 ○ ○ ○ ● ● ● ● ■ ● ● ● ■ ● ● ■
      80.4 ■
      100.3 ○ ○ ○ ● ● ● ● ■ ● ● ● ■ ● ● ■ ■
      100.4 ■
      125.3 ■ ■ ■ ■ ■ ● ● ● ■ ● ● ■ ■ ■
      150.3 ■ ■ ■ ■ ■ ● ● ● ■ ● ● ■ ■ ■
      200.3 ■ ■ ■ ■ ■ ● ● ● ■ ● ● ■ ■
      Ordering Code (example):
      Precision flat and square bar steel with machining allowance, DIN 59350 =2923.2343.
      Width B 10.4 mm = 010.
      Thickness S 10.4 mm = 010.
      Length L 500 mm = 0500
      Order No =2923.2343. 010. 010. 0500
      2923.2343. Precision flat and square bar steel with machining allowance, DIN 59350
      subject to alterations
      Precision flat and square bar steel with machining allowance, DIN 59350
      b +0,2
      +30
      1000
      s +0,2
      2923.2363.
      we deliver
      original
      quality
      Material:
      1.2363 / X 100 CrMoV 5-1
      Cold worked steel
      Execution:
      Thickness precision ground, width ground or milled, length machined
      B14
      s 8.2 10.4 12.4 15.4 20.4 25.4 30.4 40.4 50.4 60.4 80.4 100.4
      b
      20.4 ●
      25.3 ● ● ●
      25.4 ●
      30.3 ● ● ● ● ●
      30.4 ●
      40.3 ● ● ● ● ● ● ●
      40.4 ●
      50.3 ● ● ● ● ● ● ●
      50.4 ●
      60.3 ● ● ● ● ● ● ● ●
      60.4 ●
      80.3 ● ● ● ● ● ● ● ●
      80.4 ●
      100.3 ● ● ● ● ● ● ● ●
      100.4 ●
      125.3 ● ● ● ● ● ● ●
      150.3 ● ● ● ● ● ● ●
      200.3 ● ● ● ● ● ● ●
      250.3 ● ● ● ●
      Ordering Code (example):
      Precision flat and square bar steel with machining allowance, DIN 59350 =2923.2363.
      Width B 20.4 mm = 020.
      Thickness S 20.4 mm = 020.
      Length L 1000 mm = 1000
      Order No =2923.2363. 020. 020. 1000
      2923.2363. Precision flat and square bar steel with machining allowance, DIN 59350
      subject to alterations
      Precision flat and square bar steel with machining allowance, DIN 59350
      Material:
      1.2379 / X 155 CrVMo 12-1
      Cold worked steel
      Execution:
      Thickness precision ground, width ground or milled, length machined
      Note:
      ● = available in 500 mm and 1000 mm lengths
      ○ = only available in 500 mm lengths
      ■ = only available in 1000 mm lengths
      b +0,2
      +30
      / 1000
      +5
      500
      s +0,2
      2923.2379.
      we deliver
      original
      quality
      B15
      s 2.2 3.2 4.2 5.2 6.2 8.2 10.4 12.4 15.4 16.4 20.4 25.4 30.4 32.4 40.4 50.4 60.4 63.4 70.4 80.4 100.4 120.4 150.4
      b
      6.2 ○
      8.2 ●
      10.3 ● ● ● ● ● ●
      10.4 ●
      12.4 ●
      15.3 ● ● ● ● ● ● ● ■
      15.4 ●
      16.4 ■
      20.3 ● ● ● ● ● ● ● ● ● ■
      20.4 ●
      25.3 ● ● ● ● ● ● ● ● ● ■ ●
      25.4 ●
      30.3 ● ● ● ● ● ● ● ● ● ■ ● ●
      30.4 ●
      32.3 ■ ■ ■ ■ ■ ■
      32.4 ■
      40.3 ● ● ● ● ● ● ● ● ● ■ ● ● ● ■
      40.4 ●
      50.3 ● ● ● ● ● ● ● ● ● ■ ● ● ● ■ ●
      50.4 ●
      60.3 ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      60.4 ■
      63.3 ■ ■ ■ ■ ■ ■ ■ ■ ■
      63.4 ■
      70.3 ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
      70.4 ■
      80.3 ● ● ● ● ● ● ● ● ● ■ ● ● ● ■ ● ● ■ ■
      80.4 ■
      90.3 ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
      100.3 ● ● ● ● ● ● ● ● ● ■ ● ● ● ■ ● ● ■ ■ ■
      100.4 ■
      120.4 ■
      125.3 ● ● ● ● ● ● ● ● ● ■ ● ● ● ■ ● ● ■ ■ ■ ■
      150.3 ● ● ● ● ● ● ● ● ● ■ ● ● ● ■ ● ● ■ ■ ■ ■
      150.4 ■
      160.3 ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
      200.3 ● ● ● ● ● ● ● ● ● ■ ● ● ● ■ ● ● ■ ■ ■ ■
      250.3 ● ● ● ● ● ● ● ● ● ■ ● ● ● ■ ● ● ■
      300.3 ● ● ● ● ● ● ● ● ● ■ ● ● ● ■ ● ● ■
      350.3 ■ ■ ■ ■ ■ ■
      400.3 ■ ■ ■ ■ ■
      Ordering Code (example):
      Precision flat and square bar steel with machining allowance, DIN 59350 =2923.2379.
      Width B 6.2 mm = 006.
      Thickness S 6.2 mm = 006.
      Length L 500 mm = 0500
      Order No =2923.2379. 006. 006. 0500
      2923.2379. Precision flat and square bar steel with machining allowance, DIN 59350
      subject to alterations
      Precision flat and square bar steel with machining allowance, DIN 59350
      b +0,2
      +30
      / 1000
      +5
      500
      s +0,2
      2923.2436.
      we deliver
      original
      quality
      Material:
      1.2436 / X 210 CrW 12
      Cold worked steel
      Execution:
      Thickness precision ground, width ground or milled, length machined
      Note:
      ● = available in 500 mm and 1000 mm lengths
      ○ = only available in 500 mm lengths
      ■ = only available in 1000 mm lengths
      B16
      s 2.2 3.2 4.2 5.2 6.2 8.2 10.4 12.4 15.4 20.4 25.4 30.4 40.4 50.4
      b
      8.2 ○
      10.3 ○ ● ● ● ● ●
      10.4 ●
      12.4 ●
      15.3 ○ ● ● ● ● ● ● ○
      15.4 ○
      20.3 ○ ● ● ● ● ● ● ● ●
      20.4 ●
      25.3 ○ ● ● ● ● ● ● ● ● ●
      25.4 ●
      30.3 ○ ● ● ● ● ● ● ● ● ● ●
      30.4 ●
      40.3 ○ ● ● ● ● ● ● ● ● ● ● ●
      40.4 ●
      50.3 ○ ● ● ● ● ● ● ● ● ● ● ● ○
      50.4 ■
      60.3 ○ ● ● ● ● ● ● ● ● ● ● ● ○
      80.3 ○ ● ● ● ● ● ● ● ● ● ● ● ●
      100.3 ○ ● ● ● ● ● ● ● ● ● ● ● ● ■
      125.3 ○ ○ ○ ○ ○ ○ ● ● ● ● ● ● ● ■
      150.3 ○ ○ ○ ○ ○ ○ ● ● ● ● ● ● ● ■
      200.3 ○ ○ ○ ○ ○ ○ ● ● ● ● ● ● ● ■
      250.3 ○ ○ ○ ○ ○ ○ ● ● ● ● ● ● ● ■
      300.3 ○ ○ ○ ○ ○ ○ ● ● ● ● ● ● ○
      Ordering Code (example):
      Precision flat and square bar steel with machining allowance, DIN 59350 =2923.2436.
      Width B 8.2 mm = 008.
      Thickness S 8.2 mm = 008.
      Length L 500 mm = 0500
      Order No =2923.2436. 008. 008. 0500
      2923.2436. Precision flat and square bar steel with machining allowance, DIN 59350
      subject to alterations
      Precision flat and square bar steel with machining allowance, DIN 59350
      Material:
      1.2767 / X 45 NiCrMo 4
      Cold worked steel
      Execution:
      Thickness precision ground, width ground or milled, length machined
      Note:
      ● = available in 500 mm and 1000 mm lengths
      ○ = only available in 500 mm lengths
      ■ = only available in 1000 mm lengths
      b +0,2
      +30
      / 1000
      +5
      500
      s +0,2
      2923.2767.
      we deliver
      original
      quality
      B17
      s 4.2 5.2 6.2 8.2 10.4 12.4 15.4 16.4 20.4 25.4 30.4 32.4 40.4 50.4 60.4 80.4 100.4
      b
      10.3 ○ ○ ○ ○
      10.4 ●
      12.4 ●
      15.3 ○ ○ ○ ○ ○ ○
      15.4 ○
      20.3 ○ ○ ○ ● ● ● ● ■
      20.4 ●
      25.3 ○ ○ ○ ● ● ● ● ■ ●
      25.4 ●
      30.3 ○ ○ ○ ● ● ● ● ● ●
      30.4 ●
      32.3 ■ ■ ■
      40.3 ○ ○ ○ ● ● ● ● ■ ● ● ● ■
      40.4 ●
      50.3 ○ ○ ○ ● ● ● ● ■ ● ● ● ■ ●
      50.4 ●
      60.3 ○ ○ ○ ● ● ● ● ● ● ● ● ●
      60.4 ■
      63.3 ■ ■ ■ ■ ■ ■
      70.3 ■ ■ ■ ■ ■ ■ ■ ■
      80.3 ○ ○ ○ ● ● ● ● ■ ● ● ● ● ● ■
      80.4 ■
      100.3 ○ ○ ○ ● ● ● ● ■ ● ● ● ■ ● ● ■ ■
      100.4 ■
      125.3 ● ● ● ● ■ ● ● ● ■ ● ● ■ ■ ■
      150.3 ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
      200.3 ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
      250.3 ■ ■ ■ ■ ■ ■ ■ ■ ■
      300.3 ■ ■ ■ ■ ■ ■ ■
      Ordering Code (example):
      Precision flat and square bar steel with machining allowance, DIN 59350 =2923.2767.
      Width B 10.4 mm = 010.
      Thickness S 10.4 mm = 010.
      Length L 500 mm = 0500
      Order No =2923.2767. 010. 010. 0500
      2923.2767. Precision flat and square bar steel with machining allowance, DIN 59350
      subject to alterations
      Precision flat and square bar steel, DIN 59350
      +5
      / 1000 500
      2922.2842.
      +0,2
      b
      +0,05
      s
      we deliver
      original
      quality
      Material:
      1.2842 / 90 MnCrV
      Cold worked steel
      Execution:
      Thickness precision ground, width ground or milled, length machined
      Note:
      ● = available in 500 mm and 1000 mm lengths
      ○ = only available in 500 mm lengths
      B18
      s 1 2 3 4 5 6 8 10 12 15 16 20 25 30 40 50 60
      b
      4 ○
      5 ○
      6 ●
      8 ●
      10 ○ ● ● ● ● ● ● ●
      12 ○ ● ● ● ● ● ● ● ●
      15 ○ ● ● ● ● ● ● ● ● ●
      16 ●
      20 ○ ● ● ● ● ● ● ● ● ● ●
      25 ○ ● ● ● ● ● ● ● ● ● ● ●
      30 ○ ● ● ● ● ● ● ● ● ● ● ● ●
      35 ○ ● ● ● ● ● ● ● ● ● ● ● ●
      40 ○ ● ● ● ● ● ● ● ● ● ● ● ● ●
      50 ○ ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      60 ○ ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      70 ○ ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      80 ○ ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      100 ○ ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      120 ○ ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      125 ○ ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      150 ○ ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      160 ○ ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      180 ○ ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      200 ○ ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      250 ○ ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      300 ○ ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      Ordering Code (example):
      Precision flat and square bar steel, DIN 59350 =2922.2842.
      Width B 4 mm = 004.
      Thickness S 4 mm = 004.
      Length L 500 mm = 0500
      Order No =2922.2842. 004. 004. 0500
      2922.2842. Precision flat and square bar steel, DIN 59350
      subject to alterations
      Precision flat and square bar steel with machining allowance, DIN 59350
      Material:
      1.2842 / 90 MnCrV
      Cold worked steel
      Execution:
      Thickness precision ground, width ground or milled, length machined
      Note:
      ● = available in 500 mm and 1000 mm lengths
      ■ = only available in 1000 mm lengths
      b +0,2
      +30
      / 1000
      +10
      500
      s +0,2
      2923.2842.
      we deliver
      original
      quality
      B19
      s 2.2 3.2 4.2 5.2 6.2 8.2 10.4 12.4 15.4 16.4 20.4 25.4 30.4 32.4 40.4 50.4 60.4 80.4 100.4
      b
      10.3 ■ ■ ■ ■ ■ ■
      10.4 ●
      12.4 ●
      15.3 ■ ■ ■ ■ ■ ■ ■ ■
      16.4 ■
      20.3 ■ ■ ● ● ● ● ● ● ● ■
      20.4 ●
      25.3 ■ ■ ● ● ● ● ● ● ● ■ ●
      25.4 ●
      30.3 ■ ■ ● ● ● ● ● ● ● ■ ● ●
      30.4 ●
      32.3 ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
      32.4 ■
      40.3 ■ ■ ● ● ● ● ● ● ● ■ ● ● ● ■
      40.4 ●
      50.3 ■ ■ ● ● ● ● ● ● ● ■ ● ● ● ■ ●
      50.4 ●
      60.3 ■ ■ ● ● ● ● ● ● ● ■ ● ● ● ■ ● ●
      60.4 ●
      63.3 ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
      70.3 ■ ■ ● ● ● ● ● ● ● ■ ● ● ● ■ ● ●
      80.3 ■ ■ ● ● ● ● ● ● ● ■ ● ● ● ■ ● ●
      80.4 ●
      100.3 ■ ■ ● ● ● ● ● ● ● ■ ● ● ● ■ ● ● ●
      100.4 ●
      120.3 ■ ■ ● ● ● ● ● ● ● ■ ● ● ● ■ ● ● ● ●
      125.3 ■ ■ ● ● ● ● ● ● ● ■ ● ● ● ■ ● ● ● ●
      150.3 ■ ■ ● ● ● ● ● ● ● ■ ● ● ● ■ ● ● ● ●
      160.3 ● ● ● ● ● ● ● ■ ● ● ● ■ ● ● ● ●
      180.3 ● ● ● ● ● ● ● ■ ● ● ● ■ ● ● ● ●
      200.3 ■ ■ ● ● ● ● ● ● ● ■ ● ● ● ■ ● ● ● ●
      250.3 ● ● ● ● ■ ● ● ● ■ ● ● ● ●
      300.3 ● ● ● ● ■ ● ● ●
      Ordering Code (example):
      Precision flat and square bar steel with machining allowance, DIN 59350 =2923.2842.
      Width B 10.4 mm = 010.
      Thickness S 10.4 mm = 010.
      Length L 500 mm = 0500
      Order No =2923.2842. 010. 010. 0500
      2923.2842. Precision flat and square bar steel with machining allowance, DIN 59350

      5 m 10 m 5 m 5 m 5 m 5 m 10 5 5
      12,7 12,7 6 25 50 100
      0,005
      m m
      – – –
      m

      m
      – 0,001 – – >1500
      0,01
      m m

      m m m m m
      – 0,002 – – >1500
      0,02
      r r

      m m m m m
      – 0,002 2000–2200 >1500
      0,03
      r r

      r r m r m
      – 0,002 2000–2200 1500–1700
      0,04
      r r

      r r m r m
      – 0,003 2000–2200 1500–1700
      0,05
      r r r r r m r m m
      0,003 2000–2200 1500–1700
      0,06
      r r

      r r m r m
      – 0,003 2000–2200 1500–1700
      0,07
      r r

      r r m r m
      – 0,004 2000–2200 1500–1700
      0,08
      r r r r r m r m
      – 0,004 2000–2200 1500–1700
      0,09
      r r

      r r m r m
      – 0,004 2000–2200 1500–1700
      0,10
      r r r r r m r m m
      0,004 2000–2200 1500–1700
      0,12
      r r
      – –
      r m r m
      – 0,004 2000–2200 1500–1700
      0,15
      r r r r r m r m m
      0,005 2000–2200 1500–1700
      0,20
      r r r r r m r m m
      0,006 1800–2100 1500–1700
      0,25
      r r r r r m r m m
      0,007 1800–2100 1500–1700
      0,30
      r r r r r m r m m
      0,007 1800–2100 1500–1700
      0,35
      r r
      – –
      r m r m
      – 0,008 1800–2000 1500–1700
      0,40
      r r r r r m r m m
      0,009 1600–1900 1500–1700
      0,45
      r r
      – –
      r m r m
      – 0,009 1600–1900 1500–1700
      0,50
      r r r r r m r m m
      0,010 1600–1900 1500–1700
      0,55
      r r
      – – –
      m

      m
      – 0,010 1600–1900 1500–1700
      0,60
      r r

      r r m r m
      – 0,010 1600–1900 1500–1700
      0,70
      r r

      r r m r m
      – 0,012 1600–1900 1500–1700
      0,80
      r r

      r r m r m
      – 0,013 1600–1800 1500–1700
      0,90
      r r

      r r m r m
      – 0,013 1600–1800 1500–1700
      1,00
      r r

      r r m r m
      – 0,013 1600–1800 1500–1700
       = 2925.
       = 2925.1.
       = 2925.1.0070.
       = 2925.1.0025.0012.
       = 2925.1.0025.0127.10000
       = 2925.1.0070.0012.10000
       = 2925.
       = 2925.2.
       = 2925.1.0020.
       = 2925.1.0025.050.
       = 2925.1.0025.050.300
       = 2925.2.0020.050.300
      subject to alterations
      2925. Precision feeler gauge, Foil shim
      Precision feeler gauge
      Contents per can/spool
      Foil shims
      Contents: foil shims per pack
      Technical specifications
      tensile strength N/mm 2
      Width mm c Format
      50 3 300 mm
      Format
      100 3 500 mm
      Format
      150 3 500 mm
      Tolerance
       ± mm
      for
      carbon steel
      for
      stainless steel
      Thickness mm .
      Order No. Part II = Material
      r C-Steel, Material-No.: 1.1274 is 1
      m Stainless steel, Material-No.: 1.4310 is 2
      Ordering code (example):
      Precision feeler gauge
      Material-No.: 1.1274
      Thickness 0,07 mm
      Width 12,7 mm
      Length 10 m
      Order No
      Ordering code (example):
      Foil shim
      Material-No.: 1.4310
      Thickness 0,02 mm
      Width 50 mm
      Length 300 mm
      Order No
      Typical Applications:
      h Tolerance measurement of internal and external dimensions.
      h Adjustment of tooling devices and machine parts.
      h Testing valve and cylinder clearances.
      Material:
      C-Steel, Material-No.: 1.1274
      Stainless steel, Material-No.: 1.4310
      Precision feeler gauge
      Foil shim
      B20

      5 m 10 m 5 m 5 m 5 m 5 m 10 5 5
      12,7 12,7 6 25 50 100
      0,005
      m m
      – – –
      m

      m
      – 0,001 – – >1500
      0,01
      m m

      m m m m m
      – 0,002 – – >1500
      0,02
      r r

      m m m m m
      – 0,002 2000–2200 >1500
      0,03
      r r

      r r m r m
      – 0,002 2000–2200 1500–1700
      0,04
      r r

      r r m r m
      – 0,003 2000–2200 1500–1700
      0,05
      r r r r r m r m m
      0,003 2000–2200 1500–1700
      0,06
      r r

      r r m r m
      – 0,003 2000–2200 1500–1700
      0,07
      r r

      r r m r m
      – 0,004 2000–2200 1500–1700
      0,08
      r r r r r m r m
      – 0,004 2000–2200 1500–1700
      0,09
      r r

      r r m r m
      – 0,004 2000–2200 1500–1700
      0,10
      r r r r r m r m m
      0,004 2000–2200 1500–1700
      0,12
      r r
      – –
      r m r m
      – 0,004 2000–2200 1500–1700
      0,15
      r r r r r m r m m
      0,005 2000–2200 1500–1700
      0,20
      r r r r r m r m m
      0,006 1800–2100 1500–1700
      0,25
      r r r r r m r m m
      0,007 1800–2100 1500–1700
      0,30
      r r r r r m r m m
      0,007 1800–2100 1500–1700
      0,35
      r r
      – –
      r m r m
      – 0,008 1800–2000 1500–1700
      0,40
      r r r r r m r m m
      0,009 1600–1900 1500–1700
      0,45
      r r
      – –
      r m r m
      – 0,009 1600–1900 1500–1700
      0,50
      r r r r r m r m m
      0,010 1600–1900 1500–1700
      0,55
      r r
      – – –
      m

      m
      – 0,010 1600–1900 1500–1700
      0,60
      r r

      r r m r m
      – 0,010 1600–1900 1500–1700
      0,70
      r r

      r r m r m
      – 0,012 1600–1900 1500–1700
      0,80
      r r

      r r m r m
      – 0,013 1600–1800 1500–1700
      0,90
      r r

      r r m r m
      – 0,013 1600–1800 1500–1700
      1,00
      r r

      r r m r m
      – 0,013 1600–1800 1500–1700
       = 2925.
       = 2925.1.
       = 2925.1.0070.
       = 2925.1.0025.0012.
       = 2925.1.0025.0127.10000
       = 2925.1.0070.0012.10000
       = 2925.
       = 2925.2.
       = 2925.1.0020.
       = 2925.1.0025.050.
       = 2925.1.0025.050.300
       = 2925.2.0020.050.300
      subject to alterations
      2925. Precision feeler gauge, Foil shim
      Precision feeler gauge
      Contents per can/spool
      Foil shims
      Contents: foil shims per pack
      Technical specifications
      tensile strength N/mm 2
      Width mm c Format
      50 3 300 mm
      Format
      100 3 500 mm
      Format
      150 3 500 mm
      Tolerance
       ± mm
      for
      carbon steel
      for
      stainless steel
      Thickness mm .
      Order No. Part II = Material
      r C-Steel, Material-No.: 1.1274 is 1
      m Stainless steel, Material-No.: 1.4310 is 2
      Ordering code (example):
      Precision feeler gauge
      Material-No.: 1.1274
      Thickness 0,07 mm
      Width 12,7 mm
      Length 10 m
      Order No
      Ordering code (example):
      Foil shim
      Material-No.: 1.4310
      Thickness 0,02 mm
      Width 50 mm
      Length 300 mm
      Order No
      Typical Applications:
      h Tolerance measurement of internal and external dimensions.
      h Adjustment of tooling devices and machine parts.
      h Testing valve and cylinder clearances.
      Material:
      C-Steel, Material-No.: 1.1274
      Stainless steel, Material-No.: 1.4310
      Precision feeler gauge
      Foil shim
      A
      B
      C
      D
      E
      F
      G
      H
      J
      K
      L
      Die Sets
      Precision Ground Plates and Flat Bars
      Lifting and Clamping Devices
      Guide elements
      Ground Precision Components
      Springs
      Elastomer-Bars, -Sheets, -Sections
      FIBRO Chemical Tooling Aids
      Peripheral Equipment
      Cam Units
      Standard Parts for Mould Making
      Lifting and Clamping Devices
      Shanks, lifter studs, eyebolts
      Clamping claws, screws and bolts
      Lifting and
      Clamping
      Devices
      C2
      Lifting and
      Clamping
      Devices
      C3
      Contents
      subject to alterations
      211.11.
      Die set shank, straight
      211.12.
      Threaded die set shank DIN ISO
      10242-1
      211.13.
      Die set shank with collar
      211.14.
      Bolt-on die set shank, ~DIN ISO
      10242-2
      212.11.
      Coupling spigot with thread
      212.15.
      Coupling spigot with flange
      212.16.
      Spigot holder
      213.12.
      Screw-in lifter stud VDI 3366
      2130.03.
      Screw-in lifter stud with cable secu-
      ring device
      2130.11.
      Lifter stud VDI 3366
      2130.12.
      Lifter stud with cable securing
      device, with welded disc
      2130.13.
      Lifter stud with cable securing
      device
      213.13.
      Lifter stud
      2131.10.
      Lifting eye bolt, high tensile
      2131.11.
      Lifting eye bolt, rotatable
      2131.20.
      Rotary safety eyebolt, light duty,
      with ball bearing
      C4
      C10
      C10
      C11
      C11
      C12
      C12
      C13
      C13
      C14
      C15
      C15
      C16
      C17
      C18
      C19
      C20
      Contents
      subject to alterations
      2131.21.
      Rotary safety eyebolt, heavy duty,
      with ball bearing
      2131.25.
      Universal rotary safety eyebolt with
      oval ring
      2131.23.
      Universal rotary safety eyebolt with
      eye hook
      2131.22.
      Ring block with position lock
      2131.30.
      Lifting eye bolt, high tensile
      2131.31.
      Attachment point screwable profilift
      gamma
      2131.32.
      Attachment point screwable profilift
      gamma ring nut
      2131.33.
      Hoisting snap link, omnidirectional
      2131.34.
      Attachment point screwable profilift
      delta
      2131.35.
      Triple vortice ring
      2131.36.
      Double vortice hook
      2131.37.
      Double vortice ring
      2131.38.
      Double vortice ring with central
      device
      2131.39.
      Double vortice ring with internal
      thread
      2431.40.
      Double vortex ring screw
      2134.41.
      Double vortex ring screw with
      centring
      C5
      C21
      C22
      C23
      C24
      C25
      C26
      C27
      C28
      C29
      C30
      C31
      C32
      C33
      C34
      C35
      C36
      Contents
      subject to alterations
      2131.42.
      Double vortex ring screw Mega DSS
      2131.43.
      Double vortice ring with internal
      thread
      2131.50.
      Attachment point weldable
      profilift eta
      2133.11.
      Lifting flange with bolt with safety
      ring, to BMW
      2133.11.10.
      Lifting flange with bolt with safety
      ring, to AUDI
      2133.12.
      Lifting flange with bolt with safety
      ring
      2133.13.
      Lifting flange with bolt with safety
      ring, with feather key, to CNOMO
      Standard
      2133.15.
      Lifting flange with bolt with safety
      ring, with feather key, to BMW
      2132.10.
      Die lifting bolt with safety ring,
      VDI 3366
      2132.10.55.
      Die lifting bolt with safety ring and
      spring, to VW standard
      2132.11.
      Die lifting bolt with safety ring and
      spring, CNOMO Standard
      2132.10.03. .1
      Bush for die lifting bolt
      2133.12. .1
      Die lifting bolt with safety ring, for
      lifting flange 2133.12.
      2140.17.
      Clamp, forked shape, DIN 6315-B
      2140.15.
      Clamping claw, goose-neck shape
      2140.13.
      Clamping claw, infinitely variable
      C6
      C37
      C38
      C39
      C40
      C41
      C42-43
      C44
      C45
      C46
      C47
      C48
      C49
      C50
      C52
      C52
      C53
      Contents
      subject to alterations
      2140.14.
      Clamping claw, infinitely variable
      2140.16.
      Clamp, straight, DIN 6314
      2140.10.
      Clamp, straight, with setscrew
      2140.18.
      Clamp, goose neck shape, DIN 6316
      2140.11.
      Clamp, goose neck shape, with
      setscrew
      2140.20.
      Support, adjustable
      2140.19.
      Stepped Block DIN 6318
      2140.02.
      Set screw
      2140.32.
      Hexagon Nut DIN 6330 B
      2140.33.
      Hexagon nut with collar, DIN 6331
      2140.34.
      Washer DIN 6340
      2140.30.
      Screw for T-slot, DIN 787
      2192.10.
      Hexagon socket head cap screw,
      DIN EN ISO 4762 - Strength class 8.8
      2192.12.
      Hexagon socket head cap screw,
      DIN EN ISO 4762 - Strength class
      12.9
      2192.20.
      Hexagon socket head cap screw,
      with low profile head and key guide,
      DIN 6912 - Strength class 8.8
      2192.40.
      Hexagon socket head cap screw,
      with low profile head, DIN 7984 -
      Strength class 8.8
      C7
      C53
      C54
      C54
      C55
      C55
      C56
      C56
      C57
      C57
      C58
      C58
      C59
      C60
      C61
      C62
      C63
      Contents
      subject to alterations
      2192.30.
      Hexagon socket countersunk
      head cap screw, ISO 10642 -
      Strength class 8.8
      2192.61.
      Flat mushroom head screw with
      hexagon socket
      2192.90.
      Screw plug
      2140.01.01.
      Clamping tool set
      2140.01.02.
      Clamping tool set
      C8
      C64
      C65
      C66
      C68
      C69
      subject to alterations C9
      subject to alterations
      Die set shank, straight
      Threaded die set shank DIN ISO 10242-1
      2
      l
      1
      5
      d 1 h11
      d 3
      l
      l
      3
      l
      SW
      211.11.
      10°
      2
      l
      4
      l
      d 3
      d 1 f9
      5
      l
      3
      l
      1
      l
      SW
      d 2
      211.12.
      C10
      Order No d 1 d 3 l 1 l 2 l 3 l 5 SW*
      211.11.20.016 20 M16X1,5 40 3 18 58 17
      211.11.25.016 25 M16X1,5 45 4 23 68 21
      211.11.25.020 25 M20x1,5 45 4 23 68 21
      211.11.32.020 32 M20x1,5 56 4 23 79 27
      211.11.32.024 32 M24x1,5 56 4 23 79 27
      211.11.40.024 40 M24x1,5 70 5 23 93 36
      211.11.40.030 40 M30x2 70 5 23 93 36
      211.11.50.030 50 M30x2 80 6 28 108 41
      211.11.65.042 65 M42x3 100 8 28 128 55
      *SW = Width across flats
      Order No d 1 d 2 d 3 l 1 l 2 l 3 l 4 l 5 SW*
      211.12.20.016 20 15 M16x1,5 40 2 18 12 58 17
      211.12.25.016 25 20 M16x1,5 45 2.5 23 16 68 21
      211.12.25.020 25 20 M20x1,5 45 2.5 23 16 68 21
      211.12.32.020 32 25 M20x1,5 56 3 23 16 79 27
      211.12.32.024 32 25 M24x1,5 56 3 23 16 79 27
      211.12.40.024 40 32 M24x1,5 70 4 23 26 93 36
      211.12.40.027 40 32 M27x2 70 4 23 26 93 36
      211.12.40.030 40 32 M30x2 70 4 23 26 93 36
      211.12.50.030 50 42 M30x2 80 5 28 26 108 41
      211.12.65.042 65 53 M42x3 100 8 28 26 128 55
      *SW = Width across flats
      211.11.
      211.12.
      Die set shank, straight
      Threaded die set shank DIN ISO 10242-1
      subject to alterations
      Die set shank with collar
      Bolt-on die set shank, ~DIN ISO 10242-2
      f9
      1 b
      4
      l l 2
      d 1
      d 3
      d 4
      5
      l
      1
      l
      3
      l
      SW
      10°
      d 2
      211.13.
      d
      d 10
      d 11
      10°
      1 f9
      d 2
      5
      l
      1
      l
      3
      l
      4
      l
      2
      l
      ø9(4x)
      9
      ø15
      211.14.
      C11
      Order No d 1 d 2 d 3 d 4 l 1 l 2 l 3 l 4 l 5 b 1 SW*
      211.13.20.016 20 15 M16x1,5 28 40 2 16 12 61 5 17
      211.13.25.016 25 20 M16x1,5 34 45 2.5 16 16 66 5 21
      211.13.25.020 25 20 M20x1,5 34 45 2.5 20 16 70 5 21
      211.13.32.020 32 25 M20x1,5 42 56 3 20 16 82 5 27
      211.13.32.024 32 25 M24x1,5 42 56 3 24 16 86 5 27
      211.13.40.024 40 32 M24x1,5 52 70 4 24 26 102 5 36
      211.13.40.030 40 32 M30x2 52 70 4 30 26 108 5 36
      211.13.50.030 50 42 M30x2 62 80 5 30 26 118 5 41
      *SW = Width across flats
      Order No d 1 d 2 d 10 d 11 l 1 l 2 l 3 l 4 l 5
      211.14.20.063 20 15 45 63 40 2 18 12 58
      211.14.25.063 25 20 45 63 45 2.5 18 16 63
      211.14.25.080 25 20 63 80 45 2.5 18 16 63
      211.14.32.097 32 25 80 97 56 3 23 16 79
      211.14.32.122 32 25 105 122 56 3 23 16 79
      211.14.40.097 40 32 80 97 70 4 23 26 93
      211.14.40.122 40 32 105 122 70 4 23 26 93
      211.13.
      211.14.
      Die set shank with collar
      Bolt-on die set shank, ~DIN ISO 10242-2
      subject to alterations
      Coupling spigot with thread
      Coupling spigot with flange
      SW
      5
      d
      s
      3
      s
      5
      l
      1
      s
      3 l
      2
      4
      d
      3
      d
      212.11.
      ø15
      s
      2
      s
      5 l
      3 l
      5
      d
      4
      d
      7
      d
      8
      d
      1
      ø9(4x)
      9
      212.15.
      C12
      Order No d 3 d 4 d 5 l 3 l 5 s 1 s 2 s 3 SW*
      212.11.016 M16x1,5 25 32 18 41 13 6.5 23 36
      212.11.020 M20x1,5 32 48 23 64 19 9.5 41 50
      212.11.024 M24x1,5 32 48 23 64 19 9.5 41 50
      212.11.030 M30x2 32 48 23 66 19 9.5 43 60
      *SW = Width across flats
      Order No d 4 d 5 d 7 d 8 l 3 l 5 s 1 s 2
      212.15.063 25 32 46 63 18 31 13 6.5
      212.15.080 32 48 63 80 18 37 19 9.5
      212.15.097 32 48 80 97 23 42 19 9.5
      212.15.122 32 48 105 122 23 42 19 9.5
      212.11.
      212.15.
      Coupling spigot with thread
      Coupling spigot with flange
      subject to alterations
      Spigot holder
      Screw-in lifter stud VDI 3366
      10°
      2
      s
      1
      s
      2
      l
      5
      l
      1
      l
      3
      l
      4
      l
      8
      d
      5
      d
      4
      d
      d 1 d9
      d 2
      212.16.
      l 4 l 3 l 2
      5
      l
      3
      d
      VDI 3366
      SW
      1
      d
      213.12.
      C13
      Order No
      Work area
      d 1 d 2 d 4 d 5 d 8 l 1 l 2 l 3 l 4 l 5 s 1 s 2
      212.16.025 25 20 26 33 56 45 4 25 16 70 12.6 7
      212.16.032 32 25 33 49 80 56 4 30 16 86 18.6 10
      212.16.040 40 32 33 49 80 70 5 30 26 100 18.6 10
      Order No d 1 d 3 l 2 l 3 l 4 l 5 SW* Lifting capacity [kg]
      213.12.016 16 M16 20 28 5 58 24 320
      213.12.020 20 M20 22 34 6 68 30 500
      213.12.024 25 M24 25 38 8 78 36 1000
      213.12.030 32 M30 32 45 10 95 41 1500
      213.12.036 40 M36 40 56 12 118 50 2500
      *SW = Width across flats
      212.16.
      213.12. Screw-in lifter stud VDI 3366
      Spigot holder
      subject to alterations
      Screw-in lifter stud with cable securing device
      Note:
      For opening the cable safety device, use key 2130.00.03.01 (to be
      ordered separately).
      2130.03.
      5
      l
      2
      l
      3
      l
      4
      l
      d 3
      SW
      d 1
      r
      C14
      Order No d 1 d 3 l 2 l 3 l 4 l 5 SW r Lifting capacity [kg]
      2130.03.020 20 M20 22 34 6.5 8.5 30 38 500
      2130.03.024 25 M24 25 38 8 9 36 42 1000
      2130.03.030 32 M30 32 45 10 10 41 50 1500
      2130.03.036 40 M36 40 56 12 11 50 57 2500
      2130.03. Screw-in lifter stud with cable securing device
      subject to alterations
      Lifter stud VDI 3366
      Lifter stud with cable securing device, with welded disc
      d 2
      d
      t
      2
      6
      l
      6
      l
      5
      l
      4
      l
      3
      l
      2
      l
      4
      l
      f f
      f
      4
      d 1 d 1
      2130.11.
      t 8
      l
      d 4
      f
      d 5 d 5
      6
      l
      6
      l
      4
      l
      4
      l
      f f
      2
      d 2
      d 1 d 1
      3
      l
      2
      5
      l
      2130.12.
      C15
      Order No d 1 d 2 d 4 f l 2 l 3 l 4 l 5 l 6 t
      Number of
      screw holes Lifting capacity [kg]
      2130.11.020 16 9 15 20 6 20 10 80 34 9 2 320
      2130.11.025 20 11 18 25 8 25 10 90 37 11 2 630
      2130.11.035 25 13.5 20 35 8 30 12 100 38 13 2 1250
      2130.11.040 32 17.5 26 40 10 32 16 120 46 17.5 2 2000
      2130.11.050 40 22 33 50 10 40 18 140 54 21.5 2 3200
      2130.11.060 50 26 40 60 12 45 22 160 59 25.5 2 5000
      2130.11.080 63 22 33 80 12 50 20 200 78 21.5 4 8000
      2130.11.100 80 26 40 100 15 65 25 250 100 25.5 4 12500
      2130.11.120 100 33 48 120 15 80 30 300 125 32 4 20000
      Order No d 1 d 2 d 4 d 5 * f l 2 l 3 l 4 l 5 l 6 t
      Number of
      screw holes Lifting capacity [kg]
      2130.12.020 16 9 15 60 20 6 20 10 80 34 9 2 320
      2130.12.025 20 11 18 70 25 8 25 10 90 37 11 2 630
      2130.12.035 25 13.5 20 70 35 8 30 12 100 38 13 2 1250
      2130.12.040 32 17.5 26 110 40 10 32 16 120 46 17.5 2 2000
      2130.12.050 40 22 33 110 50 10 40 18 140 54 21.5 2 3200
      2130.12.060 50 26 40 150 60 12 45 22 160 59 25.5 2 5000
      2130.12.080 63 22 33 150 80 12 50 20 200 78 21.5 4 8000
      2130.12.100 80 26 40 150 100 15 65 25 250 100 25.5 4 12500
      2130.12.120 100 33 48 150 120 15 80 30 300 125 32 4 20000
      *Pulley for cable securing device welded on
      2130.11.
      2130.12.
      Lifter stud VDI 3366
      Lifter stud with cable securing device, with welded disc
      subject to alterations
      Lifter stud with cable securing device
      Note:
      For opening the cable safety device, use key 2130.00.03.01 (to be
      ordered separately).
      f/2
      2
      l
      5
      l
      6
      l
      3
      l
      4
      l
      6
      l
      4
      l
      d 2
      d 4
      t
      d 1
      d 1
      ?f
      ?f
      r
      r
      2130.13.
      C16
      Order No d 1 d 2 d 4 f l 2 l 3 l 4 l 5 l 6 r t
      Number of
      screw holes Lifting capacity [kg]
      2130.13.025 20 11 18 25 8 25 10 99 37 38 11 2 630
      2130.13.035 25 13.5 20 35 8 30 12 112.5 38 42 13 2 1250
      2130.13.040 32 17.5 26 40 10 32 16 132.5 46 52 17.5 2 2000
      2130.13.050 40 22 33 50 10 40 18 152.5 54 60 21.5 2 3200
      2130.13.060 50 26 40 60 12 45 22 173 59 66 25.5 2 5000
      2130.13.080 63 22 33 80 15 50 20 213.5 78 80 21.5 4 8000
      2130.13. Lifter stud with cable securing device
      subject to alterations
      Lifter stud
      20°
      h
      1
      h
      b
      2
      d
      2
      7
      l
      5
      l
      3
      l
      4
      l
      4
      l l
      4
      d
      1
      d
      6
      l
      30°
      1
      t
      2
      t
      3
      d
      213.13.
      C17
      Order No b d 1 d 2 d 3 d 4 h h 1 l 2 l 3 l 4 l 5 l 6 l 7 t 1 t 2 Lifting capacity [kg]
      213.13.060 60 32 13.5 20 44 24 40 8 60 14 100 32 24 15 29 2000
      213.13.080 80 40 17.5 26 60 32 50 10 70 16 120 44 26 20 35.5 3500
      213.13.100 100 50 22 33 70 40 65 12 88 20 145 56 30 25 46.5 6000
      213.13. Lifter stud
      subject to alterations
      Lifting eye bolt, high tensile
      Description:
      During use check that the eyebolt is firmly seated.
      Rotation during the lifting operation must be avoided.
      It will not rotate automatically to the correct load angle.
      Not approved for mining applications.
      Material:
      1.6541, heavy duty heat treated.
      100% electromagnetically crack tested, to EN 1677-1, safety factor 4:1.
      Note:
      Ensure that the bolting surface is flat. Thread must be screwed in
      completely.
      Format: = octagonal, Grade 8.
      Identification: clear indication of permissible load for F 2 category critical
      loads (not permissible for DIN 580).
      1 1 2 2 2
      0° 90° 0° 90° 0–45° 45–60° 0–45° 45–60°
      2131.10.006 0,4 0,8
      2131.10.008 0,8 1,6
      2131.10.010 1 2
      2131.10.012 1,6 3,2
      2131.10.014 3 6
      2131.10.016 4 8
      2131.10.020 6 12
      2131.10.024 8 16
      2131.10.030 12 24
      2131.10.036 16 32
      2131.10.042 24 48
      2131.10.048 32 64
      G G G G G G G G
      F 1 F 2
      Max. carried load “G” in tonnes for various types of attachment
      Type of attachment, Arrangement
      of the suspension points
      Number of lines 2 symmetrical 3 and 4 symmetrical 3 and 4
      Angle of inclination/ load direction
      asymme-
      trical
      asymmetri-
      cal
      Order No carried load in tonnes
      We recommend that you
      use the eyebolt 2131.11.
      that is adjustable in the
      direction of force for the
      type of suspension with no
      details of carried loads!
      b a c
      d
      e
      F 1
      F 2 F 2
      2131.10.
      d 2
      C18
      Order No d 2 c a b d e
      2131.10.006 M6 12 35 11 25 25
      2131.10.008 M8 12 35 11 25 25
      2131.10.010 M10 15 35 11 25 25
      2131.10.012 M12 18 41 13 30 30
      2131.10.014 M14 21 48 15 35 35
      2131.10.016 M16 24 48 15 35 35
      2131.10.020 M20 30 55 17 40 40
      2131.10.024 M24 36 70 21 50 50
      2131.10.030 M30 45 85 26 60 60
      2131.10.036 M36 54 130 43 90 100
      2131.10.042 M42 63 130 43 90 100
      2131.10.048 M48 67 130 43 90 100
      2131.10. Lifting eye bolt, high tensile
      subject to alterations
      Lifting eye bolt, rotatable
      e
      e 1
      b c a
      d
      360°
      F 1
      F 2 F 2
      2131.11.
      d 2
      Description:
      During use check that the hexagon socket screw is firmly seated. Can be
      set for the direction of application so that there is no accidental turning
      and flipping over. Captive hexagon socket screw. No tools are required
      as the hexagon socket screw is supplied with a hardened star profile
      key. The star profile key engages in the hexagon socket. It can be
      screwed and unscrewed by hand.
      Make sure that the ring is free to rotate through 360° when the unit is
      screwed in.
      Material:
      1.6541, forged, heavy duty heat treated.
      100% electromagnetically crack tested, to EN 1677-4, safety factor 4:1.
      Note:
      Ensure that the bolting surface is flat. Thread must be screwed in
      completely.
      Format: stellate – clearly distinguishable to DIN 580 eye bolt
      Identification: clear indication of permissible load for the loading capa-
      city in the plane of the ring.
      1 1 2 2 2
      0° 90° 0° 90° 0–45° 45–60° 0–45° 45–60°
      2131.11.008 1 0,4 2 0,8 0,56 0,4 0,4 0,84 0,6 0,4
      2131.11.010 1 0,4 2 0,8 0,56 0,4 0,4 0,84 0,6 0,4
      2131.11.012 2 0,75 4 1,5 1 0,75 0,75 1,6 1,12 0,75
      2131.11.016 4 1,5 8 3 2,1 1,5 1,5 3,15 2,25 1,5
      2131.11.020 6 2,3 12 4,6 3,22 2,3 2,3 4,83 3,45 2,3
      2131.11.024 8 3,2 16 6,4 4,48 3,2 3,2 6,7 4,8 3,2
      2131.11.030 12 4,5 24 9 6,3 4,5 4,5 9,4 6,7 4,5
      2131.11.036 16 7 32 14 9,8 7 7 14,7 10,5 7
      2131.11.042 24 9 48 18 12,6 9 9 18,9 13,5 9
      2131.11.048 32 12 64 24 16,8 12 12 25,2 18 12
      G G G G G G G G
      F 1 F 2
      Max. carried load “G” in tonnes for various types of attachment
      Type of attachment, Arrangement
      of the suspension points
      Number of lines 2 symmetrical 3 and 4 symmetrical 3 and 4
      Angle of inclination/ load direction
      asymme-
      trical
      asymmetri-
      cal
      Order No carried load in tonnes
      C19
      Order No d 2 c a b d e e 1
      2131.11.008 M8 12 34 11 25 25 11.7
      2131.11.010 M10 15 34 11 25 25 12.1
      2131.11.012 M12 18 42 13 30 30 14.9
      2131.11.016 M16 24 49 15 35 35 17.3
      2131.11.020 M20 30 57 17 40 40 20.5
      2131.11.024 M24 36 69 21 48 48 25.4
      2131.11.030 M30 45 86 26 60 60 30.1
      2131.11.036 M36 54 103 32 72 75 37.6
      2131.11.042 M42 63 120 38 82 85 43.7
      2131.11.048 M48 72 137 43 94 100 48.1
      2131.11. Lifting eye bolt, rotatable
      subject to alterations
      Rotary safety eyebolt, light duty, with ball bearing
      Description:
      For loads that are turned and rotated.
      Mounted on ball-bearings – can be rotated through 360° under load
      (F 3 ).
      Cannot be rotated under full load at 90° to the threaded fixing (F 1 , F 2 ).
      Not suitable for extended rotational movement when fully loaded.
      Can be loaded on all sides with a safety factor 4:1.
      High-strength suspension eye conforming to EN 1677-4
      1) Other thread lengths available upon request.
      Note:
      Ensure that the bolting surface is flat. Thread must be screwed in
      completely.
      The threaded connection on the transported load must be suitable for
      transferring forces.
      1 1 2 2 2
      0° 90° 0° 90° 0–45° 45–60° 0–45° 45–60°
      2131.20.008.013 M 8 0,6 0,3 (0,4) 1,2 0,6 (0,8) 0,42 (0,56) 0,3 (0,4) 0,3 (0,4) 0,63 (0,84) 0,45 (0,6) 0,3 (0,4)
      2131.20.010.017 M10 0,9 0,45 (0,6) 1,8 0,9 (1,2) 0,63 (0,84) 0,45 (0,6) 0,45 (0,6) 0,95 (1,26) 0,68 (0,9) 0,45 (0,6)
      G G G G G G G G
      F 3 F 1 (F 2 )
      Max. carried load “G” in tonnes for various types of attachment
      Type of attachment, Arrangement
      of the suspension points
      Number of lines 2 symmetrical 3 and 4 symmetrical 3 and 4
      Angle of inclination/ load direction
      asymme-
      trical
      asymmetri-
      cal
      Order No Thread carried load in tonnes
      3
      F
      2
      F
      1
      F
      a f 1)
      SW
      2
      d
      1
      d
      e
      g b
      c a
      180°
      360°
      2131.20.
      C20
      Order No
      Rated carrying capacity
      for F 1 [t] d 2 f a b c d 1 e g SW*
      2131.20.008.013 0.3 M8 13 8 33 29 30 76 36 28
      2131.20.010.017 0.45 M10 17 8 33 29 36 78 38 30
      *SW = Width across flats
      2131.20. Rotary safety eyebolt, light duty, with ball bearing
      subject to alterations
      Rotary safety eyebolt, heavy duty, with ball bearing
      e
      3
      F
      a
      d 1 d 2
      SW
      f
      b
      c
      a
      180°
      360°
      2
      F
      1
      F
      2131.21.
      Description:
      For loads that are turned and rotated.
      Mounted on ball-bearings – can be rotated through 360° under load
      (F 3 ).
      Cannot be rotated under full load at 90° to the threaded fixing (F 1 , F 2 ).
      Not suitable for extended rotational movement when fully loaded.
      Can be loaded on all sides with a safety factor 4:1.
      Note:
      Ensure that the bolting surface is flat. Thread must be screwed in
      completely.
      The threaded connection on the transported load must be suitable for
      transferring forces.
      1 1 2 2 2
      0° 90° 0° 90° 0–45° 45–60° 0–45° 45–60°
      2131.21.036 M36 12,5 8 (10) 25 16 (20) 11,2 (14) 8 (10) 8 (10) 16,8 (21) 12 (15) 8 (10)
      2131.21.042 M42 16 10 (12,5) 32 20 (25) 14 (17,5) 10 (12,5) 10 (12,5) 21 (26,2) 15 (18,8) 10 (12,5)
      2131.21.045 [M45] 16 10 (12,5) 32 20 (25) 14 (17,5) 10 (12,5) 10 (12,5) 21 (26,2) 15 (18,8) 10 (12,5)
      2131.21.048 M48 16 10 (12,5) 32 20 (25) 14 (17,5) 10 (12,5) 10 (12,5) 21 (26,2) 15 (18,8) 10 (12,5)
      2131.21.056 M56 25 15 (18) 50 30 (36) 21 (25,2) 15 (18) 15 (18) 31,5 (38) 22,5 (27) 15 (18)
      2131.21.064 M64 25 15 (18) 50 30 (36) 21 (25,2) 15 (18) 15 (18) 31,5 (38) 22,5 (27) 15 (18)
      2131.21.090 M90 35 35 (40) 70 70 (80) 49 (56) 35 (40) 35 (40) 73,5 (84) 52,5 (60) 35 (40)
      G G G G G G G G
      F 3 F 1 (F 2 )
      Max. carried load “G” in tonnes for various types of attachment
      Type of attachment, Arrange-
      ment of the suspension points
      Number of lines 2 symmetrical 3 and 4 symmetrical 3 and 4
      Angle of inclination/ load direction
      asymme-
      trical
      asymme-
      trical
      Order No Thread carried load in tonnes
      C21
      Order No
      Rated carrying capacity
      for F 1 [t] d 2 f a b c d 1 e SW*
      2131.21.036 8 M36 54 22 87 50 90 210 80
      2131.21.042 10 M42 63 26 112 65 98 240 85
      2131.21.045 10 M45 67 26 112 65 98 240 85
      2131.21.048 10 M48 68 26 112 65 98 240 85
      2131.21.056 15 M56 84 32 120 70 120 280 95
      2131.21.064 15 M64 95 32 120 70 120 280 95
      2131.21.090 35 M90 135 40 125 80 170 332 130
      *SW = Width across flats
      2131.21. Rotary safety eyebolt, heavy duty, with ball bearing
      subject to alterations
      Universal rotary safety eyebolt with oval ring
      Description:
      The unviversal rotary safety eyebolts with oval ring with double ball
      bearing for smooth non-jerking action tipping, rotating and turning.
      Also rotates 90° in direction of screwing in with full load.
      Not suitable for extended rotational movement when fully loaded.
      The special design avoids damage to lifting elements and the valuable
      load when turning.
      For ring hoists, slings, cables, hooks etc.
      Note:
      Ensure even screw-in surface, threads must be screwed in completely.
      1 1 2 2 2
      0° 90° 0° 90° 0–45° 45–60° 0–45° 45–60°
      2131.25.012 0,63 0,63 1,26 1,26 0,88 0,63 0,63 1,32 0,95 0,63
      2131.25.016 1,5 1,5 3,0 3,0 2,1 1,5 1,5 3,15 2,25 1,5
      2131.25.020 2,5 2,5 5,0 5,0 3,5 2,5 2,5 5,25 3,75 2,5
      2131.25.024 4,0 4,0 8,0 8,0 5,6 4,0 4,0 8,4 6,0 4,0
      2131.25.030 6,5 5,0 13,0 10,0 7 5 5 10,5 7,5 5,0
      2131.25.036 10,0 8,0 20,0 16,0 11,2 8,0 8,0 16,8 12,0 8,0
      G G G G G G G G
      Max. carried load “G” in tonnes for various types of attachment
      Type of attachment, Arrangement
      of the suspension points
      Number of lines 2 symmetrical 3 and 4 symmetrical 3 and 4
      Angle of inclination/ load direction
      asymme-
      trical
      asymmetri-
      cal
      Order No carried load in tonnes
      a
      d
      g
      f
      SW
      c
      b
      e
      2131.25.
      d 2
      C22
      Order No
      Rated carrying
      capacity [t] d 2 f a b c d e g SW*
      2131.25.012 0.63 M12 18 9 65 35 40 105 41 36
      2131.25.016 1.5 M16 24 11 65 35 46 115 50 41
      2131.25.020 2.5 M20 30 13 75 40 61 135 61 55
      2131.25.024 4.0 M24 36 16 95 45 78 172 77 70
      2131.25.030 5.0 M30 45 21 130 60 95 223 93 85
      2131.25.036 8.0 M36 54 24 140 65 100 242 102 90
      *SW = Width across flats
      2131.25. Universal rotary safety eyebolt with oval ring
      subject to alterations
      Universal rotary safety eyebolt with eye hook
      d
      b
      e
      g f
      a
      SW
      c
      2131.23.
      d 2
      Description:
      The unviversal rotary safety eyebolts with eye hooks with double ball
      bearing for smooth non-jerking action tipping, rotating and turning.
      Also rotates 90° in direction of screwing in with full load.
      Not suitable for extended rotational movement when fully loaded.
      The special design avoids damage to lifting elements and the valuable
      load when turning.
      For ring hoists, slings, cables, hooks etc.
      Note:
      Ensure even screw-in surface, threads must be screwed in completely.
      1 1 2 2 2
      0° 90° 0° 90° 0–45° 45–60° 0–45° 45–60°
      2131.23.012 0,63 0,63 1,26 1,26 0,88 0,63 0,63 1,32 0,95 0,63
      2131.23.016 1,5 1,5 3,0 3,0 2,1 1,5 1,5 3,15 2,25 1,5
      2131.23.020 2,5 2,5 5,0 5,0 3,5 2,5 2,5 5,25 3,75 2,5
      2131.23.024 4,0 4,0 8,0 8,0 5,6 4,0 4,0 8,4 6,0 4,0
      2131.23.030 6,5 5,0 13,0 10,0 7 5,0 5,0 10,5 7,5 5,0
      2131.23.036 10,0 8,0 20,0 16,0 11,2 8,0 8,0 16,8 12,0 8,0
      G G G G G G G G
      Max. carried load “G” in tonnes for various types of attachment
      Type of attachment, Arrangement
      of the suspension points
      Number of lines 2 symmetrical 3 and 4 symmetrical 3 and 4
      Angle of inclination/ load direction
      asymme-
      trical
      asymmetri-
      cal
      Order No carried load in tonnes
      C23
      Order No
      Rated carrying
      capacity [t] d 2 f a b c d e g SW*
      2131.23.012 0,63 M12 18 13 75 18 40 116 41 36
      2131.23.016 1,5 M16 24 20 97 25 46 147 50 41
      2131.23.020 2.5 M20 30 28 126 30 61 187 61 55
      2131.23.024 4.0 M24 36 36 150 35 78 227 77 70
      2131.23.030 5.0 M30 45 37 174 40 95 267 93 85
      2131.23.036 8.0 M36 54 49 208 48 100 310 102 90
      *SW = Width across flats
      2131.23. Universal rotary safety eyebolt with eye hook
      subject to alterations
      Ring block with position lock
      Description:
      The position locks protect the fixing bolts against bending and shear
      stresses. The ring can be folded down.
      Note:
      1) Drill the holes for the position locks first.
      2) Fix the ring block in the position lock and then tap the holes.
      Ensure that the bolting surface is flat.
      See also loading of eyebolts.
      The threaded connection on the transported load must be suitable for
      transferring forces.
      Fixing:
      Only use 100% crack tested bolts.
      Once bolts have been in use for some time, check that they are firmly
      seated.
      Minimum grade of screws, see table: "Y"
      2131.22.016.: Only use hexagonal bolts to ISO 4014. Fit washers before
      tightening and securing bolts (tightening torque 120 Nm).
      2131.22.020./030.: Use only hexagon socket head screws conforming to
      ISO 4762 (2131.22.020 tightening torque 300 Nm,
      2131.22.030 tightening torque 600 Nm).
      G G G G G G G G
      F 3 F 1 (F 2 )
      1 1 2 2 2
       0° 90° 0° 90° 0–45° 45–60° 0–45° 45–60°

      2131.22.016 2 ⊗ M16 3 3 6 6 4,2 3 3 6,3 4,5 3
      2131.22.020 4 ⊗ M20 10 10 20 20 14 10 10 21 15 10
      2131.22.030 4 ⊗ M30 16 16 32 32 22,4 16 16 33,6 24 16
      Max. carried load “G” in tonnes for various types of attachment
      Type of attachment,
      Arrangement of the suspension points
      Number of lines 2 symmetrical 3 and 4 symmetrical 3 and 4
      Angle of inclination/ load direction asymm. asymm.
      Order No Thread carried load in tonnes
      b
      1)
      2)
      Position lock
      180°
      M16
      c
      a
      h
      p
      m
      k
      d
      +0,2
      ød
      1x45°
      6 min.
      g
      53
      3
      Lock plate
      17 DIN 463 St.
      max. carrying capacity
      = 3,0 t when secured
      at four points
      1
      n
      ±0,5
      92
      ±0,5
      e
      2131.22.016
      2
      d
      a
      +0,2
      h
      180°
      m
      screw
      min.
      g
      j
      c
      b
      f ±0,4
      d 1
      k
      ±0,5
      e
      d
      n
      Position lock
      P
      2131.22.
      2
      d
      C24
      Order No
      Rated carrying
      capacity [t] d 2 h a b c d d 1 e f g j k m n y p
      2131.22.016 3 M16 50 67 16 5 48 18 136 - 30 - 178 34 16 10.9 71
      2131.22.020 10 M20 45 102 22 6 65 30 143 78 50 8 213 120 25 12.9 100
      2131.22.030 16 M30 63 131 30 8 90 46 198 104 70 10 270 170 32 12.9 134
      2131.22. Ring block with position lock
      subject to alterations
      Lifting eye bolt, high tensile
      h
      l
      øc
      b
      øf a e
      2131.30.
      d 2
      Description:
      Only tighten eyebolts hand-tight. Not suitable for diagonal pull. Avoid
      turning movements during transport.
      Material:
      Alloyed steel, hardened and tempered, quality class 8
      Note:
      Load capacity according to operating instructions or load capacity table
      in the specified directions of pull.
      When selecting the arrangement, make sure that unequal loading does
      not occur, e.g. if:
      - no free adjustment is possible in the direction of pull
      - direction of pull does not lie in the specified range
      Safety factory 4
      1 1 2 2 2 2 3+4 3+4 2 3+4
      0° 90° 0° 90° 0–45° 45–60° 0–45° 45–60°
      2131.30.006 0.4 0.8
      2131.30.008 0.8 1.6
      2131.30.010 1 2
      2131.30.012 1.6 3.2
      2131.30.014 3 6
      2131.30.016 4 8
      2131.30.020 6 12
      2131.30.024 8 16
      2131.30.030 12 24
      2131.30.036 16 32
      2131.30.042 24 48
      2131.30.048 32 64
      G G G G G G G G
      Max. carrying capacity “G” in tonnes for various types of attachment
      Type of attachment
      Number of lines
      Angle of inclination/ load direction
      asym­
      metrical
      asym­
      metrical
      Order No carrying capacity in tonnes
      Load the eyebolt in the pull
      direction only!
      For these lifting types, use
      the turnable eyebolt
      2131.31. or the turnable
      attachment point 2131.34
      C25
      Order No
      Rated carrying
      capacity [t] d 2 l a b c e f h
      2131.30.006 0.4 M6 13 25 45 25 10 10 45
      2131.30.008 0.8 M8 13 25 45 25 10 10 45
      2131.30.010 1 M10 17 25 45 25 10 10 45
      2131.30.012 1.6 M12 21 35 63 35 14 14 62
      2131.30.014 3 M14 21 35 63 35 14 14 62
      2131.30.016 4 M16 27 35 63 35 14 14 62
      2131.30.020 6 M20 30 50 90 50 20 20 90
      2131.30.024 8 M24 36 50 90 50 20 20 90
      2131.30.030 12 M30 45 60 108 65 24 24 109
      2131.30.036 16 M36 54 70 126 75 26 28 128
      2131.30.042 24 M42 63 80 144 85 30 32 147
      2131.30.048 32 M48 68 90 166 100 35 38 168
      2131.30. Lifting eye bolt, high tensile
      subject to alterations
      Attachment point screwable profilift gamma
      Description:
      When replacing, make sure the Allen screw is seated firmly. Adjustable
      in the direction of force, thus no unintended opening up and overtwis-
      ting! Screwing in and out by hand possible. The ring must be able to be
      turned 360° in the screwed tight state.
      Material:
      Structural parts: High-strength chrome nickle alloyed Q & T steel.
      Screws: High-strength screws strength class 10.9, 100 % crack tested
      Note:
      Ensure even screw-in surface, threads must be screwed in completely.
      Each attachment point is provided with an individual serial number
      Information about installation and removal, see operating instructions.
      Load capacity according to operating instructions or load capacity table
      in the specified directions of pull.
      Set attachment point in permitted loading direction before loading.
      When selecting the arrangement, make sure that unequal loading does
      not occur, e.g. if:
      - no free adjustment is possible in the direction of pull
      - direction of pull does not lie in the specified range
      Safety factor 4
      Other lengths (n) on request!
      1 1 2 2 2 2 3+4 3+4 2 3+4
      0° 90° 0° 90° 0–45° 45–60° 0–45° 45–60°
      2131.31.008 1 0.3 2 0.6 0.4 0.3 0.6 0.4 0.3 0.3
      2131.31.010 1.5 0.5 3 1 0.7 0.5 1 0.7 0.5 0.5
      2131.31.012 2 0.7 4 1.4 1 0.7 1.4 1 0.7 0.7
      2131.31.016 4 1.5 8 3 2.1 1.5 3 2.2 1.5 1.5
      2131.31.020 5 2.3 10 4.6 3.2 2.3 4.8 3.4 2.3 2.3
      2131.31.024 6.5 3.2 13 6.4 4.5 3.2 6.7 4.8 3.2 3.2
      2131.31.030 12 4.9 24 9.8 6.9 4.9 10.3 7.3 4.9 4.9
      2131.31.036 15 7 30 14 9.8 7 14.7 10.5 7 7
      2131.31.042 22 9 44 18 12.6 9 18.9 13.5 9 9
      2131.31.048 30 12 60 24 16.8 12 25 18 12 12
      G G G G G G G G
      Max. carrying capacity “G” in tonnes for various types of attachment
      Type of attachment
      Number of lines
      Angle of inclination/ load direction
      asymme­
      trical
      asymme­
      trical
      Order No tightening torque [Nm] carrying capacity in tonnes
      simply tighten
      hand­tight
      f
      a
      b
      h e
      d c
      2131.31.
      d 2
      C26
      Order No
      Rated carrying
      capacity [t] d 2 n a b c d e f
      2131.31.008 0.3 M8 15 25 45 10 27 53 35
      2131.31.010 0.5 M10 15 25 45 10 27 53 35
      2131.31.012 0.7 M12 20 30 55 12 32 63 43
      2131.31.016 1.5 M16 25 35 64 14 36 70 50
      2131.31.020 2.3 M20 30 40 69 16 41 78 54
      2131.31.024 3.2 M24 35 50 86 18 50 93 69
      2131.31.030 4.9 M30 45 60 110 25 60 114 90
      2131.31.036 7 M36 55 70 132 31 70 136 108
      2131.31.042 9 M42 65 80 152 36 72 153 126
      2131.31.048 12 M48 75 95 179 42 88 179 148
      2131.31. Attachment point screwable profilift gamma
      subject to alterations
      Attachment point screwable profilift gamma ring nut
      a
      b
      e
      d c
      f
      2131.32.
      d 2
      Description:
      Pay attention to firm seating of the ring nut when inserting. Adjustable
      in the direction of force, thus no unintended opening up and overtwis-
      ting! Screwing in and out by hand possible. The ring must be able to be
      turned 360° in the screwed tight state.
      Material:
      Structural parts: High-strength chrome nickle alloyed Q & T steel.
      Nuts: High-strength nuts, strength class 10, 100 % crack tested
      Note:
      Ensure even screw-in surface, threads must be screwed in completely.
      Each attachment point is provided with an individual serial number
      Information about installation and removal, see operating instructions.
      Load capacity according to operating instructions or load capacity table
      in the specified directions of pull.
      Set attachment point in permitted loading direction before loading.
      When selecting the arrangement, make sure that unequal loading does
      not occur, e.g. if:
      - no free adjustment is possible in the direction of pull
      - direction of pull does not lie in the specified range
      Safety factor 4.
      1 1 2 2 2 2 3+4 3+4 2 3+4
      0° 90° 0° 90° 0–45° 45–60° 0–45° 45–60°
      2131.32.008 1 0.3 2 0.6 0.4 0.3 0.6 0.4 0.3 0.3
      2131.32.010 1.5 0.5 3 1 0.7 0.5 1 0.7 0.5 0.5
      2131.32.012 2 0.7 4 1.4 1 0.7 1.4 1 0.7 0.7
      2131.32.016 4 1.5 8 3 2.1 1.5 3 2.2 1.5 1.5
      2131.32.020 4.5 2.3 9 4.6 3.2 2.3 4.8 3.4 2.3 2.3
      2131.32.024 5 3.5 10 7 4.9 3.5 7.4 5.2 3.5 3.5
      2131.32.030 12 4.9 24 1.4 6.9 4.9 10.3 7.3 4.9 4.9
      G G G G G G G G
      Max. carrying capacity “G” in tonnes for various types of attachment
      Type of attachment
      Number of lines
      Angle of inclination/ load direction
      asymme­
      trical
      asymme­
      trical
      Order No carrying capacity in tonnes
      C27
      Order No
      Rated carrying
      capacity [t] d 2 a b c d e f
      2131.32.008 0.3 M8 25 45 10 21 55 35
      2131.32.010 0.5 M10 25 45 10 21 55 35
      2131.32.012 0.7 M12 30 55 12 25 65 43
      2131.32.016 1.5 M16 35 64 14 29 72 50
      2131.32.020 2.3 M20 40 69 16 34 80 54
      2131.32.024 3.5 M24 50 86 18 40 95 69
      2131.32.030 4.9 M30 60 110 25 47 115 90
      2131.32. Attachment point screwable profilift gamma ring nut
      subject to alterations
      Hoisting snap link, omnidirectional
      Description:
      The hinged unit is free to rotate through 360°, self-align with the direc-
      tion of pull and folding. The hoisting Snap Link must be installed in the
      stress direction before loading, must be able to move freely and may
      not be supported at an angle.
      Do not rotate under load.
      Full load bearing capacity in any direction.
      Complete with a 100% crack-checked outer and inner hexagonal bolt
      for universal tool use.
      Material:
      Alloyed tool steel
      Note:
      Ensure even screw-in surface, threads must be screwed in completely.
      1 1 2 2 2
      0° 90° 0° 90° 0–45° 45–60° 0–45° 45–60°
      2131.33.008.055 0.3 0.3 0.6 0.6 0.42 0.3 0.63 0.45 0.3 0.3
      2131.33.010.055 0.63 0.63 1.26 1.26 0.88 0.63 1.32 0.95 0.63 0.63
      2131.33.012.057 1 1 2 2 1.4 1 2.1 1.5 1 1
      2131.33.014.057 1.2 1.2 2.4 2.4 1.7 1.2 2.5 1.8 1.2 1.2
      2131.33.016.057 1.5 1.5 3 3 2.1 1.5 3.1 2.2 1.5 1.5
      2131.33.018.082 2 2 4 4 2.8 2 4.2 3 2 2
      2131.33.020.082 2.5 2.5 5 5 3.5 2.5 5.2 3.7 2.5 2.5
      2131.33.024.082 4 4 8 8 5.6 4 8.4 6 4 4
      2131.33.027.099 4 4 8 8 5.6 4 8.4 6 4 4
      2131.33.030.099 5 5 10 10 7 5 10.5 7.5 5 5
      2131.33.036.099 7 7 14 14 9.8 7 14.7 10.5 7 7
      2131.33.036.124 8 8 16 16 11.2 8 16.8 12 8 8
      2131.33.042.124 10 10 20 20 14 10 21 15 10 10
      2131.33.042.158 15 15 30 30 21 15 31.5 22.5 15 15
      2131.33.048.158 20 20 40 40 28 20 42 30 20 20
      G G G G G G G G
      Max. carrying capacity “G” in tonnes for various types of attachment
      Type of attachment,
      Arrangement of the suspension points
      Number of lines 2 symmetrical 3 and 4 symmetrical 3 and 4
      Angle of inclination/ load direction
      asymme­
      trical
      asymme­
      trical
      Order No carrying capacity in tonnes
      f
      e
      SW
      s
      g
      b
      a
      h
      c
      d
      X
      „X”
      2131.33.
      d 2
      C28
      Order No
      Rated carrying
      capacity [t] d 2 e g a b c d f h s SW Tightening torque [Nm]
      2131.33.008.055 0.3 M8 12 55 30 35 35 11 84 28 6 13 30
      2131.33.010.055 0.63 M10 16 55 30 35 36 11 86 29 6 17 60
      2131.33.012.057 1 M12 18 57 33 37 44 14 98 36 8 19 100
      2131.33.014.057 1.2 M14 21 57 33 37 45 14 98 36 10 22 120
      2131.33.016.057 1.5 M16 24 57 33 37 46 14 98 36 10 24 150
      2131.33.018.082 2 M18 26 82 50 54 57 17 142 44 12 30 200
      2131.33.020.082 2.5 M20 30 82 50 54 57 17 142 44 12 30 250
      2131.33.024.082 4 M24 36 82 50 54 59 17 142 44 14 36 400
      2131.33.027.099 4 M27 38 99 60 65 79 23 170 62 17 41 400
      2131.33.030.099 5 M30 48 99 60 65 81 23 170 62 17 46 500
      2131.33.036.099 7 M36 54 99 60 65 86 23 177 63 22 55 700
      2131.33.036.124 8 M36 62 124 77 85 101 27 225 78 22 55 800
      2131.33.042.124 10 M42 72 124 77 85 104 27 225 78.5 24 65 1000
      2131.33.042.158 15 M42 63 158 95 104 115 36 256 89 24 65 1500
      2131.33.048.158 20 M48 72 158 95 104 119 36 258 89 27 75 2000
      2131.33. Hoisting snap link, omnidirectional
      subject to alterations
      Attachment point screwable profilift delta
      180°
      e
      n c b
      d
      a
      2131.34.
      d 2
      Description:
      For loads which are turned and flipped.
      Ball-bearing-mounted – under load turnable by 360°
      Not suitable for continuous turning movements under full load.
      Material:
      Structural parts: High-strength chrome nickle alloyed Q & T steel.
      Screws: High-strength screws strength class 12.9, 100 % crack tested
      Note:
      Ensure even screw-in surface, threads must be screwed in completely.
      The threaded connection on the transport belt must be suitable for the
      force transmission.
      Each attachment point is provided with an individual serial number
      Information about installation and removal, see operating instructions.
      Load capacity according to operating instructions or load capacity table
      in the specified directions of pull.
      When selecting the arrangement, make sure that unequal loading does
      not occur, e.g. if:
      - no free adjustment is possible in the direction of pull
      - direction of pull does not lie in the specified range
      - when fit closely at edges or surfaces
      Safety factor 4
      * 2131.34.014 only by request!
      1 1 2 2 2 2 3+4 3+4 2 3+4
      0° 90° 0° 90° 0–45° 45–60° 0–45° 45–60°
      2131.34.008 10 0.6 0.3 1.2 0.6 0.4 0.3 0.6 0.4 0.3 0.3
      2131.34.010 10 1 0.5 2 1 0.7 0.5 1 0.75 0.5 0.5
      2131.34.012 15 1.4 0.7 2.8 1.4 0.95 0.7 1.4 1 0.7 0.7
      2131.34.014* 25 2 1 4 2 1.4 1 2.1 1.5 1 1
      2131.34.016 30 2.8 1.5 5.6 3 2.1 1.5 3.1 2.1 1.5 1.5
      2131.34.020 80 5 2.5 10 5 3.5 2.5 5.3 3.5 2.5 2.5
      2131.34.024 150 7 4 14 8 5.5 4 8.4 6 4 4
      2131.34.030 230 10 6 20 12 8.4 6 12.6 9 6 6
      2131.34.036 450 12.5 8 25 16 11.2 8 16.8 12 8 8
      2131.34.042 600 16 10 32 20 14 10 21 15 10 10
      2131.34.048 600 16 12.5 32 25 17.5 12.5 26.5 18 12.5 12.5
      G G G G G G G G
      Max. carrying capacity “G” in tonnes for various types of attachment
      Type of attachment
      Number of lines
      Angle of inclination/load direction
      asymme-
      trical
      asymme-
      trical
      Order No tightening torque [Nm] carrying capacity in tonnes
      C29
      Order No
      Rated carrying
      capacity [t] d 2 n a b c d e
      2131.34.008 0.3 M8 20 30 38 54 13 38
      2131.34.010 0.5 M10 20 30 38 54 13 38
      2131.34.012 0.7 M12 22 35 48 54 13 38
      2131.34.014* 1 M14 22 35 48 54 13 38
      2131.34.016 1.5 M16 33 35 48 54 13 38
      2131.34.020 2.5 M20 33 35 55 75 16 55
      2131.34.024 4 M24 40 40 66 82 17 63
      2131.34.030 6 M30 40 50 70 92 23 72
      2131.34.036 8 M36 55 50 91 124 23 92
      2131.34.042 10 M42 60 65 91 124 27 92
      2131.34.048 12.5 M48 68 65 116 124 27 92
      2131.34. Attachment point screwable profilift delta
      subject to alterations
      Triple vortice ring
      Description:
      The triple vortice rings with double bearing mount for smooth tipping,
      turning and flipping.
      Also turnable 90° for screw-in direction under full load.
      Not suitable for continuous turning movement under full load.
      The optimised design prevents damage to lifting tackle and the
      valuable load when turning.
      For ring assembly, round slings, wire ropes, hook assemblies, etc.
      Material:
      High-strength chrome-nickle alloyed Q & T steel,
      Screws: high-strength screws, min. strength category 10.9, 100 % crack
      inspected
      Note:
      Ensure even screw-in surface, threads must be screwed in completely.
      1 1 2 2 2
      0° 90° 0° 90° 0–45° 45–60° 0–45° 45–60°
      2131.35.008 0.3 0.3 0.6 0.6 0.4 0.3 0.6 0.3 0.3 0.3
      2131.35.010 0.6 0.6 1.2 1.2 0.8 0.6 1.3 0.6 0.6 0.6
      2131.35.012 1 1 2 2 1.4 1 2.1 1 1 1
      2131.35.014 1.3 1.3 2.6 2.6 1.8 1.3 2.7 1.3 1.3 1.3
      2131.35.016 1.6 1.6 3.2 3.2 2.2 1.6 3.4 1.6 1.6 1.6
      2131.35.018 2 2 4 4 2.8 2 4.2 2 2 2
      2131.35.020 2.5 2.5 5 5 3.5 2.5 5.3 2.5 2.5 2.5
      2131.35.022 3 3 6 6 4.2 3 6.3 3 3 3
      2131.35.024 4 4 8 8 5.6 4 8.4 4 4 4
      2131.35.027 5 5 10 10 7 5 10.5 5 5 5
      2131.35.030 6.3 6.3 12.6 12.6 8.8 6.3 13.2 6.3 6.3 6.3
      2131.35.036 10 10 20 20 14 10 21 10 10 10
      2131.35.042 12.5 12.5 25 25 17.5 12.5 26.3 12.5 12.5 12.5
      2131.35.048 20 20 40 40 28 20 42 20 20 20
      2131.35.056 22 22 44 40 30.8 22 46.2 22 22 22
      G G G G G G G G
      Max. carrying capacity “G” in tonnes for various types of attachment
      Type of attachment,
      Arrangement of the suspension points
      Number of lines 2 symmetrical 4 symmetrical 3 and 4
      Angle of inclination/ load direction
      asymme­
      trical
      asymme­
      trical
      Order No carrying capacity in tonnes
      f
      1
      c
      e
      h
      g l 1 a
      d b
      s 2
      s
      2131.35.
      d 2
      C30
      Order No
      Rated carrying
      capacity [t] d 2 l 1 s 1 s 2 a b c d e f g h Tightening torque [Nm]
      2131.35.008 0.3 M8 14 8 16 33 56 30 41 25 10 58 5.5 6
      2131.35.010 0.6 M10 17 8 16 33 56 30 41 25 10 58 9.5 10
      2131.35.012 1 M12 21 8 16 33 56 30 41 25 10 58 9.5 15
      2131.35.014 1.3 M14 23 8 20 45 76 45 56 37 14 79 13 30
      2131.35.016 1.6 M16 27 8 20 45 76 45 56 37 14 79 13 50
      2131.35.018 2 M18 27 8 20 45 76 45 56 37 14 79 13 70
      2131.35.020 2.5 M20 30 8 20 45 81 45 56 37 14 79 13 100
      2131.35.022 3 M22 33 14 24 62 105 60 80 45 20 106 19 120
      2131.35.024 4 M24 36 14 24 62 105 60 80 45 20 106 19 160
      2131.35.027 5 M27 36 14 24 62 105 60 80 45 20 106 19 160
      2131.35.030 6.3 M30 45 14 24 62 105 60 80 45 20 106 19 250
      2131.35.036 10 M36 54 19 30 81 140 80 111 71 30 148 26.5 320
      2131.35.042 12.5 M42 63 19 30 84 146 80 111 71 30 148 26.5 400
      2131.35.048 20 M48 68 19 30 100 178 110 135 90 42 180 33 600
      2131.35.056 22 M56 78 19 30 104 184 110 135 90 42 190 33 600
      2131.35. Triple vortice ring
      subject to alterations
      Double vortice hook
      c
      b d
      s 2 h
      g a l 1
      1
      s
      e
      f
      2131.36.
      d 2
      Description:
      The double vortice rings with double bearing mount for smooth tipping,
      turning and flipping.
      Also turnable 90° for screw-in direction under full load.
      Not suitable for continuous turning movement under full load.
      The optimised design prevents damage to lifting tackle and the
      valuable load when turning.
      For ring assembly, round slings, wire ropes, hook assemblies, etc.
      Material:
      High-strength chrome-nickle alloyed Q & T steel,
      Screws: high-strength screws, min. strength category 10.9, 100 % crack
      inspected
      Note:
      Ensure even screw-in surface, threads must be screwed in completely.
      1 1 2 2 2
      0° 90° 0° 90° 0–45° 45–60° 0–45° 45–60°
      2131.36.008 0.3 0.3 0.6 0.6 0.4 0.3 0.6 0.3 0.3 0.3
      2131.36.010 0.6 0.6 1.2 1.2 0.8 0.6 1.3 0.6 0.6 0.6
      2131.36.012 1 1 2 2 1.4 1 2.1 1 1 1
      2131.36.014 1.3 1.3 2.6 2.6 1.8 1.3 2.7 1.3 1.3 1.3
      2131.36.016 1.6 1.6 3.2 3.2 2.2 1.6 3.4 1.6 1.6 1.6
      2131.36.018 2 2 4 4 2.8 2 4.2 2 2 2
      2131.36.020 2.5 2.5 5 5 3.5 2.5 5.3 2.5 2.5 2.5
      G G G G G G G G
      Max. carrying capacity “G” in tonnes for various types of attachment
      Type of attachment,
      Arrangement of the suspension points
      Number of lines 2 symmetrical 4 symmetrical 3 and 4
      Angle of inclination/ load direction
      asymme­
      trical
      asymme­
      trical
      Order No carrying capacity in tonnes
      C31
      Order No
      Rated carrying
      capacity [t] d 2 l 1 s 1 s 2 a b c d e f g h Tightening torque [Nm]
      2131.36.008 0.3 M8 14 8 16 33 56 30 44 32 23 58 9.5 6
      2131.36.010 0.6 M10 17 8 16 33 56 30 44 32 23 58 9.5 10
      2131.36.012 1 M12 21 8 16 33 56 30 44 32 23 58 9.5 15
      2131.36.014 1.3 M14 23 8 20 45 76 45 58 46 29 79 13 30
      2131.36.016 1.6 M16 27 8 20 45 76 45 58 46 29 79 13 50
      2131.36.018 2 M18 27 8 20 45 76 45 58 46 29 79 13 70
      2131.36.020 2.5 M20 30 8 20 45 81 45 58 46 29 79 13 100
      2131.36. Double vortice hook
      subject to alterations
      Double vortice ring
      Description:
      The double vortex ring was especially designed to guarantee lifting
      under rotation.
      Its double joint permits a perfect alignment for load suspension.
      Material:
      High-strength chrome-nickle alloyed Q & T steel,
      Screws: high-strength screws, min. strength category 10.9, 100 % crack
      inspected
      Note:
      Ensure even screw-in surface, threads must be screwed in completely.
      The threaded connection on the transport belt must be suitable for the
      force transmission.
      Each attachment point is provided with an individual serial number
      Information about installation and removal, see operating instructions.
      Load capacity according to operating instructions or load capacity table
      in the specified directions of pull.
      When selecting the arrangement, make sure that unequal loading does
      not occur, e.g. if:
      - no free adjustment is possible in the direction of pull
      - direction of pull does not lie in the specified range
      Safety factor 5
      1 1 2 2 2
      0° 90° 0° 90° 0–45° 45–60° 0–45° 45–60°
      2131.37.004 0.05 0.05 0.1 0.1 0.07 0.05 0.1 0.05 0.05 0.05
      2131.37.005 0.075 0.075 0.15 0.15 0.1 0.6 0.15 0.075 0.075 0.05
      2131.37.006 0.1 0.1 0.2 0.2 1.4 0.1 0.2 0.1 0.1 0.1
      2131.37.008 0.3 0.3 0.6 0.6 0.4 0.3 0.6 0.3 0.3 0.3
      2131.37.010 0.6 0.6 1.2 1.2 0.8 0.6 1.3 0.6 0.6 0.6
      2131.37.012 1 1 2 2 1.4 1 2.1 1 1 1
      2131.37.014 1.3 1.3 2.6 2.6 1.8 1.3 2.7 1.3 1.3 1.3
      2131.37.016 1.6 1.6 3.2 3.2 2.2 1.6 3.4 1.6 1.6 1.6
      2131.37.018 2 2 4 4 2.8 2 4.2 2 2 2
      2131.37.020 2.5 2.5 5 5 3.5 2.5 5.3 2.5 2.5 2.5
      2131.37.022 3 3 6 6 4.2 3 6.3 3 3 3
      2131.37.024 4 4 8 8 5.6 4 8.4 4 4 4
      2131.37.027 5 5 10 10 7 5 10.5 5 5 5
      2131.37.030 6.3 6.3 12.6 12.6 8.8 6.3 13.2 6.3 6.3 6.3
      G G G G G G G G
      Max. carrying capacity “G” in tonnes for various types of attachment
      Type of attachment,
      Arrangement of the suspension points
      Number of lines 2 symmetrical 3+4 symmetrical 3 and 4
      Angle of inclination/ load direction
      asymme­
      trical
      asymme­
      trical
      Order No carrying capacity in tonnes
      f b
      g
      s 2
      l 1
      h
      a
      c
      360°
      1
      s
      d
      e
      2131.37.
      >180°
      d 2
      C32
      Order No
      Rated carrying
      capacity [t] d 2 l 1 s 1 s 2 a b c d e f g h Tightening torque [Nm]
      2131.37.004 0.05 M4 15 3 16 33 30 30 38 27 14 53 9.5 2
      2131.37.005 0.075 M5 15 4 16 33 30 30 38 27 14 53 9.5 3
      2131.37.006 0.1 M6 15 5 16 33 30 30 38 27 14 53 9.5 4
      2131.37.008 0.3 M8 14 8 16 33 30 30 38 27 14 53 9.5 6
      2131.37.010 0.6 M10 17 8 16 33 30 30 38 27 14 53 9.5 10
      2131.37.012 1 M12 21 8 16 33 30 30 38 27 14 53 9.5 15
      2131.37.014 1.3 M14 23 8 20 45 42 45 54 38 17 76 13 30
      2131.37.016 1.6 M16 27 8 20 45 42 45 54 38 17 76 13 50
      2131.37.018 2 M18 27 8 20 45 42 45 54 38 17 76 13 70
      2131.37.020 2.5 M20 30 8 20 45 42 45 54 38 17 76 13 100
      2131.37.022 3 M22 33 14 24 62 55 60 83 55 25 117 19 120
      2131.37.024 4 M24 36 14 24 62 55 60 83 55 25 117 19 160
      2131.37.027 5 M27 40 14 24 62 55 60 83 55 25 117 19 160
      2131.37.030 6.3 M30 45 14 24 62 55 60 83 55 25 117 19 250
      2131.37. Double vortice ring
      subject to alterations
      Double vortice ring with central device
      f b
      g
      s 2
      l 1
      h
      a
      c
      360°
      d 1
      t +1
      +0,5
      1
      s
      d
      e
      90°
      2131.38.
      >180°
      d 2
      Description:
      The double vortex ring with centring device was especially designed to
      guarantee lifting under rotation.
      The centring device increases the resistance of the axis in case of lateral
      mounting.
      Material:
      High-strength chrome-nickle alloyed Q & T steel,
      Screws: high-strength screws, min. strength category 10.9, 100 % crack
      inspected
      Note:
      Ensure even screw-in surface, threads must be screwed in completely.
      The threaded connection on the transport belt must be suitable for the
      force transmission.
      Each attachment point is provided with an individual serial number
      Information about installation and removal, see operating instructions.
      Load capacity according to operating instructions or load capacity table
      in the specified directions of pull.
      When selecting the arrangement, make sure that unequal loading does
      not occur, e.g. if:
      - no free adjustment is possible in the direction of pull
      - direction of pull does not lie in the specified range
      Safety factor 5
      1 1 2 2 2
      0° 90° 0° 90° 0–45° 45–60° 0–45° 45–60°
      2131.38.004 0.05 0.05 0.1 0.1 0.07 0.05 0.1 0.05 0.05 0.05
      2131.38.005 0.075 0.075 0.15 0.15 0.1 0.075 0.15 0.075 0.075 0.075
      2131.38.006 0.1 0.1 0.2 0.2 0.14 0.1 0.21 0.1 0.1 0.1
      2131.38.008 0.5 0.5 1 1 0.7 0.5 1.05 0.5 0.5 0.5
      2131.38.010 0.8 0.8 1.6 1.6 1.12 0.8 1.68 0.8 0.8 0.8
      2131.38.012 1.2 1.2 2.4 1.68 1.2 1.2 2.52 1.2 1.2 1.2
      2131.38.014 1.3 1.3 2.6 2.6 1.82 1.3 2.73 1.3 1.3 1.3
      2131.38.016 2 2 4 4 2.8 2 4.2 2 2 2
      2131.38.018 2 2 4 4 2.8 2 4.2 2 2 2
      2131.38.020 2.7 2.7 5.4 5.4 3.78 2.7 5.67 2.7 2.7 2.7
      2131.38.022 3 3 6 6 4.2 3 6.3 3 3 3
      2131.38.024 5 5 10 10 7 5 10.5 5 5 5
      2131.38.027 5 5 10 10 7 5 10.5 5 5 5
      2131.38.030 6.3 6.3 12.6 12.6 8.82 6.3 13.23 6.3 6.3 6.3
      G G G G G G G G
      Max. carrying capacity “G” in tonnes for various types of attachment
      Type of attachment,
      Arrangement of the suspension points
      Number of lines 2 symmetrical 3+4 symmetrical 3 and 4
      Angle of inclination/ load direction
      asymme­
      trical
      asymme­
      trical
      Order No carrying capacity in tonnes
      C33
      Order No
      Rated carrying
      capacity [t] d 2 l 1 s 1 s 2 a b c d e f g h d 1 Tolerance d 1 t Tightening torque [Nm]
      2131.38.004 0.05 M4 15 3 16 33 30 30 38 27 14 53 9.5 16 +0,25/0 3 2
      2131.38.005 0.075 M5 15 4 16 33 30 30 38 27 14 53 9.5 16 +0,25/0 3 3
      2131.38.006 0.1 M6 15 5 16 33 30 30 38 27 14 53 9.5 16 +0,25/0 3 4
      2131.38.008 0.5 M8 14 8 16 33 30 30 38 27 14 53 9.5 16 +0,25/0 3 6
      2131.38.010 0.8 M10 17 8 16 33 30 30 38 27 14 53 9.5 20 +0,25/0 3 10
      2131.38.012 1.2 M12 21 8 16 33 30 30 38 27 14 53 9.5 20 +0,25/0 3 15
      2131.38.014 1.3 M14 23 8 20 45 42 45 54 38 17 76 13 20 +0,30/0 3 30
      2131.38.016 2 M16 27 8 20 45 42 45 54 38 17 76 13 20 +0,30/0 3 50
      2131.38.018 2 M18 27 8 20 45 42 45 54 38 17 76 13 30 +0,30/0 3 70
      2131.38.020 2.7 M20 30 8 20 45 42 45 54 38 17 76 13 30 +0,30/0 3 100
      2131.38.022 3 M22 33 14 24 62 55 60 83 55 25 117 19 30 +0,30/0 4 120
      2131.38.024 5 M24 36 14 24 62 55 60 83 55 25 117 19 30 +0,30/0 4 160
      2131.38.027 5 M27 40 14 24 62 55 60 83 55 25 117 19 36 +0,30/0 4 200
      2131.38.030 6.3 M30 45 14 24 62 55 60 83 55 25 117 19 36 +0,30/0 4 250
      2131.38. Double vortice ring with central device
      subject to alterations
      Double vortice ring with internal thread
      Description:
      The double vortex ring with internal thread was especially designed to
      guarantee lifting under rotation.
      Its double joint permits a perfect alignment for load suspension.
      Material:
      High-strength chrome-nickle alloyed Q & T steel
      Note:
      Ensure even screw-in surface, threads must be screwed in completely.
      The threaded connection on the transport belt must be suitable for the
      force transmission.
      Each attachment point is provided with an individual serial number
      Information about installation and removal, see operating instructions.
      Load capacity according to operating instructions or load capacity table
      in the specified directions of pull.
      When selecting the arrangement, make sure that unequal loading does
      not occur, e.g. if:
      - no free adjustment is possible in the direction of pull
      - direction of pull does not lie in the specified range
      Safety factor 5
      1 1 2 2 2
      0° 90° 0° 90° 0–45° 45–60° 0–45° 45–60°
      2131.39.008 0.3 0.3 0.6 0.6 0.4 0.3 0.6 0.3 0.3 0.3
      2131.39.010 0.6 0.6 1.2 1.2 0.8 0.6 1.3 0.6 0.6 0.6
      2131.39.012 1 1 2 2 1.4 1 2.1 1 1 1
      2131.39.014 1.3 1.3 2.6 2.6 1.8 1.3 2.7 1.3 1.3 1.3
      2131.39.016 1.6 1.6 3.2 3.2 2.2 1.6 3.4 1.6 1.6 1.6
      2131.39.018 2 2 4 4 2.8 2 4.2 2 2 2
      2131.39.020 2.5 2.5 5 5 3.5 2.5 5.3 2.5 2.5 2.5
      2131.39.022 3 3 6 6 4.2 3 6.3 3 3 3
      G G G G G G G G
      Max. carrying capacity “G” in tonnes for various types of attachment
      Type of attachment,
      Arrangement of the suspension points
      Number of lines 2 symmetrical 3+4 symmetrical 3 and 4
      Angle of inclination/ load direction
      asymme­
      trical
      asymme­
      trical
      Order No carrying capacity in tonnes
      a = l
      s
      f b
      g
      360°
      d
      e
      >180°
      c
      h
      2131.39.
      d 2
      C34
      Order No
      Rated carrying
      capacity [t] d 2 l s a b c d e f g h Tightening torque [Nm]
      2131.39.008 0.3 M8 45 20 45 42 45 54 38 17 76 13 6
      2131.39.010 0.6 M10 45 20 45 42 45 54 38 17 76 13 10
      2131.39.012 1 M12 45 20 45 42 45 54 38 17 76 13 15
      2131.39.014 1 M14 45 20 45 42 45 54 38 17 76 13 30
      2131.39.016 1.6 M16 45 20 45 42 45 54 38 17 76 19 50
      2131.39.018 2 M18 62 24 62 55 60 83 55 25 117 19 70
      2131.39.020 2.5 M20 62 24 62 55 60 83 55 25 117 19 100
      2131.39.022 3 M22 62 24 62 55 60 83 55 25 117 19 120
      2131.39. Double vortice ring with internal thread
      subject to alterations
      Double vortex ring screw
      2131.40.
      s
      f
      b
      l a
      c
      d
      e
      g
      360° 360°
      d 2
      Description:
      The double vortex ring screw was especially designed for the lifting and
      rotating of heavy loads.
      Load bearing capacity in all directions and perfect alignment for load
      suspension.
      Material:
      High-strength chrome-nickle alloyed Q & T steel,
      Screws: high-strength screws, min. strength category 10.9, 100 % crack
      inspected
      Note:
      Ensure even screw-in surface, threads must be screwed in completely.
      The threaded connection on the transport belt must be suitable for the
      force transmission.
      Each attachment point is provided with an individual serial number
      Information about installation and removal, see operating instructions.
      Load capacity according to operating instructions or load capacity table
      in the specified directions of pull.
      When selecting the arrangement, make sure that unequal loading does
      not occur, e.g. if:
      - no free adjustment is possible in the direction of pull
      - direction of pull does not lie in the specified range
      Safety factor 5 - 2131.40.024 through 2131.40.042
      Safety factor 4 - 2131.40.045 through 2131.40.100
      1 1 2 2 2
      0° 90° 0° 90° 0–45° 45–60° 0–45° 45–60°
      2131.40.024 4.5 4.5 9 9 6.3 4.5 9.5 4.5 4.5 4.5
      2131.40.030 7.3 7.3 14.6 14.6 10.2 7.3 15.3 7.3 7.3 4.5
      2131.40.033 8 8 16 16 11.2 8 16.8 8 8 8
      2131.40.036 10 10 20 20 14 10 21 10 10 10
      2131.40.039 10 10 20 20 14 10 21 10 10 10
      2131.40.042 12.5 12.5 25 25 17.5 12.5 26.3 12.5 12.5 12.5
      2131.40.045 15 15 30 30 21 15 31.5 15 15 15
      2131.40.048 20 20 40 40 28 20 42 20 20 20
      2131.40.052 20 20 40 40 28 20 42 20 20 20
      2131.40.056 25 25 50 50 35 25 52.5 25 25 25
      2131.40.064 32.1 32.1 64.2 64.2 44.9 32.1 67.4 32.1 32.1 32.1
      2131.40.072 25 25 50 50 35 25 52.5 25 25 32.1
      2131.40.080 32.1 32.1 64.2 64.2 44.9 32.1 67.4 32.1 32.1 32.1
      2131.40.090 32.1 32.1 64.2 64.2 44.9 32.1 67.4 32.1 32.1 32.1
      2131.40.100 32.1 32.1 64.2 64.2 44.9 32.1 67.4 32.1 32.1 32.1
      G G G G G G G G
      Max. carrying capacity “G” in tonnes for various types of attachment
      Type of attachment,
      Arrangement of the suspension points
      Number of lines 2 symmetrical 3+4 symmetrical 3 and 4
      Angle of inclination/ load direction
      asymme­
      trical
      asymme­
      trical
      Order No carrying capacity in tonnes
      C35
      Order No
      Rated carrying
      capacity [t] d 2 l s a b c d e f g Tightening torque [Nm]
      2131.40.024 4.5 M24 36 19 61 31 70 104 73 145 29 160
      2131.40.030 7.3 M30 45 19 61 31 70 104 73 145 29 250
      2131.40.033 8 M33 50 19 61 31 70 104 73 145 29 250
      2131.40.036 10 M36 54 19 61 31 70 104 73 145 29 320
      2131.40.039 10 M39 58 19 61 31 70 104 73 145 29 320
      2131.40.042 12.5 M42 63 19 61 31 70 104 73 145 29 400
      2131.40.045 15 M45 63 19 61 31 70 104 73 145 29 400
      2131.40.048 20 M48 68 19 79 38 90 125 91 184 36 600
      2131.40.052 20 M52 68 19 79 38 90 125 91 184 36 600
      2131.40.056 25 M56 78 19 79 38 90 125 91 184 36 600
      2131.40.064 32.1 M64 90 19 79 38 95 125 91 184 36 600
      2131.40.072 25 M72 90 19 79 38 95 125 91 184 36 600
      2131.40.080 32.1 M80 90 19 79 38 95 125 91 184 36 600
      2131.40.090 32.1 M90 90 19 79 38 95 125 91 184 36 600
      2131.40.100 32.1 M100 90 19 79 38 95 125 91 184 36 600
      2431.40. Double vortex ring screw
      subject to alterations
      Double vortex ring screw with centring
      Description:
      The double vortex ring screw with centring device was especially desi-
      gned for the lifting and rotating of heavy loads. The centring device
      increases the resistance of the axis in case of lateral mounting.
      Load bearing capacity in all directions and perfect alignment for load
      suspension.
      Material:
      High-strength chrome-nickle alloyed Q & T steel,
      Screws: high-strength screws, min. strength category 10.9, 100 % crack
      inspected
      Note:
      Ensure even screw-in surface, threads must be screwed in completely.
      The threaded connection on the transport belt must be suitable for the
      force transmission.
      Each attachment point is provided with an individual serial number
      Information about installation and removal, see operating instructions.
      Load capacity according to operating instructions or load capacity table
      in the specified directions of pull.
      When selecting the arrangement, make sure that unequal loading does
      not occur, e.g. if:
      - no free adjustment is possible in the direction of pull
      - direction of pull does not lie in the specified range
      Safety factor 5 - 2131.41.024 through 2131.41.042
      Safety factor 4 - 2131.41.045 through 2131.41.064
      1 1 2 2 2
      0° 90° 0° 90° 0–45° 45–60° 0–45° 45–60°
      2131.41.024 5 5 10 10 7 5 10.5 5 5 5
      2131.41.030 8 8 16 16 11.2 8 16.8 8 8 8
      2131.41.033 8 8 16 16 11.2 8 16.8 8 8 8
      2131.41.036 11 11 22 22 15.4 11 23.1 11 11 11
      2131.41.042 13 13 26 26 18.2 13 27.3 13 13 13
      2131.41.045 15 15 30 30 21 15 31.5 15 15 15
      2131.41.048 22 22 44 44 30.8 22 46.2 22 22 22
      2131.41.056 26 26 52 52 36.4 26 54.6 26 26 26
      2131.41.064 32.1 32.1 64.2 64.2 44.9 32.1 67.4 32.1 32.1 32.1
      G G G G G G G G
      Max. carrying capacity “G” in tonnes for various types of attachment
      Type of attachment,
      Arrangement of the suspension points
      Number of lines 2 symmetrical 3+4 symmetrical 3 and 4
      Angle of inclination/ load direction
      asymme­
      trical
      asymme­
      trical
      Order No carrying capacity in tonnes
      d 1
      s
      f
      b
      l a
      c
      d
      e
      g
      t +1
      +0,5
      90°
      360° 360°
      2131.41.
      d 2
      C36
      Order No
      Rated carrying
      capacity [t] d 2 l s a b c d e f g d 1 Tolerance d 1 t Tightening torque [Nm]
      2131.41.024 5 M24 36 19 61 31 70 104 73 145 29 30 +0,3/0 4 160
      2131.41.030 8 M30 45 19 61 31 70 104 73 145 29 36 +0,3/0 4 250
      2131.41.033 8 M33 50 19 61 31 70 104 73 145 29 48 +0,3/+0,1 6 250
      2131.41.036 11 M36 54 19 61 31 70 104 73 145 29 48 +0,5/+0,1 6 320
      2131.41.042 13 M42 63 19 61 31 70 104 73 145 29 48 +0,5/+0,1 6 400
      2131.41.045 15 M45 63 19 61 31 70 104 73 145 29 48 +0,5/+0,1 8 400
      2131.41.048 22 M48 68 19 79 38 90 125 91 184 36 64 +0,6/+0,1 8 600
      2131.41.056 26 M56 78 19 79 38 90 125 91 184 36 64 +0,6/+0,1 8 600
      2131.41.064 32.1 M64 90 19 79 38 95 125 91 184 36 74 +0,6/+0,1 10 600
      2134.41. Double vortex ring screw with centring
      subject to alterations
      Double vortex ring screw Mega DSS
      s
      f
      b
      l a
      c
      d
      e
      g
      360° 360°
      2131.42.
      d 2
      Description:
      The Mega double vortex ring screw was specially designed to lift and
      rotate under a load of up to 50 tons. It can be used directly with the
      lifting equipment (hook of the travelling crane).
      Load bearing capacity in all directions and perfect alignment for load
      suspension.
      Material:
      High-strength chrome-nickle alloyed Q & T steel,
      Screws: high-strength screws, min. strength category 10.9, 100 % crack
      inspected
      Note:
      Ensure even screw-in surface, threads must be screwed in completely.
      The threaded connection on the transport belt must be suitable for the
      force transmission.
      Each attachment point is provided with an individual serial number
      Information about installation and removal, see operating instructions.
      Load capacity according to operating instructions or load capacity table
      in the specified directions of pull.
      When selecting the arrangement, make sure that unequal loading does
      not occur, e.g. if:
      - no free adjustment is possible in the direction of pull
      - direction of pull does not lie in the specified range
      Safety factor 4
      1 1 2 2 2
      0° 90° 0° 90° 0–45° 45–60° 0–45° 45–60°
      2131.42.064 33 33 66 66 46 33 69 33 33 33
      2131.42.072 35 35 70 70 49 35 74 35 35 35
      2131.42.080 40 40 80 80 56 40 84 40 40 40
      2131.42.090 45 45 90 90 63 45 95 45 45 45
      2131.42.100 50 50 100 100 70 50 105 50 50 50
      G G G G G G G G
      Max. carrying capacity “G” in tonnes for various types of attachment
      Type of attachment,
      Arrangement of the suspension points
      Number of lines 2 symmetrical 3+4 symmetrical 3 and 4
      Angle of inclination/ load direction
      asymme­
      trical
      asymme­
      trical
      Order No carrying capacity in tonnes
      C37
      Order No
      Rated carrying
      capacity [t] d 2 l s a b c d e f g Tightening torque [Nm]
      2131.42.064 33 M64 100 36 127.5 64.5 158 186 143 278 57.5 600
      2131.42.072 35 M72 110 36 127.5 64.5 158 186 143 278 57.5 700
      2131.42.080 40 M80 120 36 127.5 64.5 158 186 143 278 57.5 800
      2131.42.090 45 M90 135 36 127.5 64.5 158 186 143 278 57.5 900
      2131.42.100 50 M100 150 36 127.5 64.5 158 186 143 278 57.5 1000
      2131.42. Double vortex ring screw Mega DSS
      subject to alterations
      Double vortice ring with internal thread
      Description:
      The double vortex ring with internal thread was especially designed for
      the lifting and rotating of heavy loads.
      Its double joint permits a perfect alignment for load suspension.
      Material:
      High-strength chrome-nickle alloyed Q & T steel
      Note:
      Ensure even screw-in surface, threads must be screwed in completely.
      The threaded connection on the transport belt must be suitable for the
      force transmission.
      Each attachment point is provided with an individual serial number
      Information about installation and removal, see operating instructions.
      Load capacity according to operating instructions or load capacity table
      in the specified directions of pull.
      When selecting the arrangement, make sure that unequal loading does
      not occur, e.g. if:
      - no free adjustment is possible in the direction of pull
      - direction of pull does not lie in the specified range
      Safety factor 5 - 2131.43.024 through 2131.43.042
      Safety factor 4 - 2131.43.045 through 2131.43.052
      1 1 2 2 2
      0° 90° 0° 90° 0–45° 45–60° 0–45° 45–60°
      2131.43.024 4.5 4.5 9 9 6.3 4.5 9.5 4.5 4.5 4.5
      2131.43.027 5 5 10 10 7 5 10.5 5 5 5
      2131.43.030 7.3 7.3 14.6 14.6 10.2 7.3 15.3 7.3 7.3 7.3
      2131.43.033 8 8 16 16 11.2 8 16.8 8 8 8
      2131.43.036 10 10 20 20 14 10 21 10 10 10
      2131.43.039 10 10 20 20 14 10 21 10 10 10
      2131.43.042 12.5 12.5 25 25 17.5 12.5 26.3 12.5 12.5 12.5
      2131.43.045 15 15 30 30 21 15 31.5 15 15 15
      2131.43.048 20 20 40 40 28 20 42 20 20 20
      2131.43.052 20 20 40 40 28 20 42 20 20 20
      G G G G G G G G
      Max. carrying capacity “G” in tonnes for various types of attachment
      Type of attachment,
      Arrangement of the suspension points
      Number of lines 2 symmetrical 3+4 symmetrical 3 and 4
      Angle of inclination/ load direction
      asymme­
      trical
      asymme­
      trical
      Order No carrying capacity in tonnes
      b
      f
      d
      e
      g
      360° 360°
      c
      a
      s
      2131.43.
      d 2
      C38
      Order No
      Rated carrying
      capacity [t] d 2 l s a b c d e f g Tightening torque [Nm]
      2131.43.024 4.5 M24 66 50 66 31 70 104 73 145 29 160
      2131.43.027 5 M27 66 50 66 31 70 104 73 145 29 200
      2131.43.030 7.3 M30 66 50 66 31 70 104 73 145 29 250
      2131.43.033 8 M33 66 50 66 31 70 104 73 145 29 250
      2131.43.036 10 M36 66 50 66 31 70 104 73 145 29 320
      2131.43.039 10 M39 89 60 89 38 95 125 91 184 36 320
      2131.43.042 12.5 M42 89 60 89 38 95 125 91 184 36 400
      2131.43.045 15 M45 89 60 89 38 95 125 91 184 36 400
      2131.43.048 20 M48 89 60 89 38 95 125 91 184 36 600
      2131.43.052 20 M52 89 60 89 38 95 125 91 184 36 600
      2131.43. Double vortice ring with internal thread
      subject to alterations
      Attachment point weldable profilift eta
      d
      f
      l
      b
      e
      a
      180°
      2131.50.
      Description:
      For welding work, the conditions according to DIN EN ISO 14341 apply.
      Welding work may only be performed by a welder with qualification
      according to EN 287-1.
      Material:
      Weld-on bracket: S355 J2 G3
      Ring: high-strength alloyed steel
      Note:
      Information about installation and removal, see operating instructions.
      Load capacity according to operating instructions or load capacity table
      in the specified directions of pull.
      When selecting the arrangement, make sure that unequal loading does
      not occur, e.g. if:
      - no free adjustment is possible in the direction of pull
      - direction of pull does not lie in the specified range
      - when fit closely at edges or surfaces
      1 1 2 2 2 2 3+4 3+4 2 3+4
      0° 90° 0° 90° 0–45° 45–60° 0–45° 45–60°
      2131.50.006 1.12 1.12 2.24 2.24 1.5 1.12 2.3 1.6 1.12 1.12
      2131.50.008 2 2 4 4 2.8 2 4.2 3 2 2
      2131.50.010 3.15 3.15 6.3 6.3 4.4 3.15 6.6 4.7 3.15 3.15
      2131.50.013 5.3 5.3 10.6 10.6 7.4 5.3 11.2 7.9 5.3 5.3
      2131.50.016 8 8 16 16 11.3 8 16.9 12 8 8
      2131.50.022 15 15 30 30 21 15 31.8 22.5 15 15
      G G G G G G G G
      Max. carrying capacity “G” in tonnes for various types of attachment
      Type of attachment
      Number of lines
      Angle of inclination/ load direction
      asymme­
      trical
      asymme­
      trical
      Order No carrying capacity in tonnes
      C39
      Order No
      Rated carrying
      capacity [t] Size a b d e f l
      2131.50.006 1.12 006 36 40 11 67 42 35
      2131.50.008 2 008 37 42 13 73 45 37
      2131.50.010 3.15 010 41 45 16.5 80 47 40
      2131.50.013 5.3 013 61 55 22 97 53 50
      2131.50.016 8 016 63 70 25 120 73 64
      2131.50.022 15 022 89 97 33 163 92 90
      2131.50. Attachment point weldable profilift eta
      subject to alterations
      Lifting flange with bolt with safety ring, to BMW
      Note:
      Centering pin 2445.10.022.045 to be ordered separately
      Order No for spare part bolt with safety ring: 2133.11.□□□.1
      Order No for lifting flange with bolt, with safety ring, two centering pins
      and fixing screws, to BMW: 2133.11.00.15.□□□, 2133.11.00.15.062.36
      d 2
      u u
      t t
      90
      m m
      t t
      u u
      m m
      c = (2 x r)
      g
      g f
      f
      a
      a
      v w
      h
      v w
      h
      n
      90
      p
      r
      d 1
      H7
      k
      R45
      d 1
      k
      30°
      s
      2133.11.082.1
      2133.11.???.1
      2133.11.032 - .062.
      2133.11.082
      ø22
      s
      2445.10.022.045
      10 x 45°
      2133.11.
      e
      t
      d 4
      b
      ø27
      d 3
      l
      l
      1
      C40
      Order No
      max. carrying capacity
      (2 lifting flanges) [kg]* d 1 d 2 a b c e f g h k l m n p s t u v w d 3 d 4 t 1
      Socket head cap screw
      DIN EN ISO 4762
      2133.11.032 6400 30 32 126 185 80 75 50 38 85 50 158 45 40 12 16 20 40 30 35 17.5 2617.5 M16x80
      2133.11.042 10000 40 42 150 210100 95 60 45 87 55 187 52 50 12 2022.545 25 40 22 3321.5 M20x100
      2133.11.052 16000 50 52 175 240120 115 75 50 95 70 220 62.5 60 16 24 25 50 35 45 26 4025.5 M24x120
      2133.11.062.36 25000 60 62 200 300140 130 80 60 145 80 246 77.5 65 20 30 35 65 60 65 39 57 38 M36x160
      2133.11.082 36000 80 82 250 300160 150 10075 105 95 305 100 90 20 30 30 60 30 60 33 48 32 M30x160
      *The maximum permissible load capacity is to be calculated such that two lifting flanges one their own are capable of carrying or turning the tool.
      2133.11. Lifting flange with bolt with safety ring, to BMW
      subject to alterations
      Lifting flange with bolt with safety ring, to AUDI
      f f
      a 1
      l l
      d 2
      c
      m
      t t t
      a
      x
      e
      w h
      w v
      k h
      H7
      b
      ø25
      ø22
      n
      b 1
      k
      20 25
      a
      u u u u
      t
      m m m
      c 1
      s
      a 1
      d 1
      d 1
      s
      s
      45°
      2445.10.022.045
      e 2
      d 6
      d 5
      2133.11.10.???.1
      2133.11.10.052
      2133.11.10.???.1
      2133.11.10.065
      2133.11.10.
      Note:
      Centering pin 2445.10.022.045 to be ordered separately
      Order No for spare part bolt with safety ring: 2133.11.10.□□□.1
      Order No for lifting flange with bolt, with safety ring, two centering pins
      and fixing screws, to AUDI: 2133.11.00.10.□□□
      C41
      Order No
      max. carrying
      capacity
      (2 lifting
      flanges) [kg]* d 1 d 2 a a 1 b b 1 c c 1 e f h k l m n s t u v w x d 5 d 6 e 2
      Socket head cap
      screw
      DIN EN ISO 4762
      2133.11.10.052 16000 50 52 188 177 290 227.5 125 35 67 75 37.5 80 221 68.5 135 35 31 62 42.5 45 20 26 40 65 M24x100
      2133.11.00.10.052 16000 50 52 188 177 290 227.5 125 35 67 75 37.5 80 221 68.5 135 35 31 62 42.5 45 20 26 40 65 M24x100
      2133.11.10.065 25000 63 65 280 220 333 258 150 47 91 80 42 90 277 107 150 35 45 90 42 65 46 39 58 84 M36x120
      2133.11.00.10.065 25000 63 65 280 220 333 258 150 47 91 80 42 90 277 107 150 35 45 90 42 65 46 39 58 84 M36x120
      *The maximum permissible load capacity is to be calculated such that two lifting flanges one their own are capable of carrying or turning the tool.
      2133.11.10. Lifting flange with bolt with safety ring, to AUDI
      subject to alterations
      Lifting flange with bolt with safety ring
      Note:
      Order No for spare part bolt with safety ring: 2133.12.□□□.1
      w
      ød
      l
      p
      b
      a
      øg
      d c
      o
      f n
      øm
      h
      3
      2133.12.???.1
      2133.12.
      C42
      Order No
      max. carrying capacity
      (2 lifting flanges) [kg]* a b c d f
      g
      H13 h l m n o p w d 3
      2133.12.016 1200 80 50 40 22.5 39 16 70 32 12.5 80 145 52 11 15.6
      2133.12.021 2000 90 60 40 27.5 42 21 79 36 16.5 90 160 56 13 20.6
      2133.12.026 4000 100 65 65 32.5 60 26 90 50 21 120 215 70 20 25.6
      *The maximum permissible load capacity is to be calculated such that two lifting flanges one their own are capable of carrying or turning the tool.
      2133.12. Lifting flange with bolt with safety ring
      subject to alterations
      Lifting flange with bolt with safety ring
      øn
      r
      øo øg
      c
      b q p
      h s
      m
      e d
      i
      t
      f l
      a
      ød 3
      2133.12.???.1
      w
      2133.12.
      Note:
      Order No for spare part bolt with safety ring: 2133.12.□□□.1
      C43
      Order No
      max. carrying capacity
      (2 lifting flanges) [kg]* a b c d e f
      g
      H13 h i l m n o p q r s t w d 3
      2133.12.034 8000 135 56 84 60 20 85 34 125 100 96 111 18 28 50 30 30 72 221 30 33
      2133.12.044 14000 180 80 110 70 30 100 44 160 125 130 140 22 36 60 40 35 90 270 40 43
      *The maximum permissible load capacity is to be calculated such that two lifting flanges one their own are capable of carrying or turning the tool.
      2133.12. Lifting flange with bolt with safety ring
      subject to alterations
      Lifting flange with bolt with safety ring, with feather key,
      to CNOMO Standard
      Note:
      Order No for spare part bolt with safety ring:
      2132.11.032 for 2133.13.033
      2132.11.040 for 2133.13.041
      Feather key to DIN 6885:
      14x9x63 up to 2133.13.033
      16x10x100 up to 2133.13.041
      2133.13.
      C44
      Order No
      max. carrying capacity
      (2 lifting flanges) [kg]* a b c d e f g h j k l m n p q r s t u v w y z a 1 b 1 d 1 e 1 f 1 g 1
      2133.13.033 8000 32 33 35 55 55 36 125 221 100135 50 30 25 111 48 30 28 20 60 42 24 10 20 14 4.5 4.5 18 28 17
      2133.13.041 12600 40 41 50 60 60 45 160 270 125180 60 40 35 140 65 35 40 30 70 55 27 12.5 25 16 5 5 22 36 21
      *The maximum permissible load capacity is to be calculated such that two lifting flanges one their own are capable of carrying or turning the tool.
      2133.13. Lifting flange with bolt with safety ring, with feather key, to CNOMO Standard
      subject to alterations
      Lifting flange with bolt with safety ring, with feather key, to BMW
      a
      f
      l
      122.5 122.5
      u
      t t
      c
      c
      e
      e
      65
      v w v
      60
      w
      k
      d 4
      d 2
      b b
      n n
      d 2
      d 3
      k
      42 H7 50 H7
      e 1
      e 2
      e 1
      e 2
      u u
      u
      t t
      a
      f
      l
      p
      p
      d 1
      d 1
      s
      s
      R45
      R50
      3 x 2133.15.082.300.2 2 x 2133.15.082.345.2
      1 x 2133.15.082.345.3
      2133.15.082.300 2133.15.082.345
      2133.15.082.300.1 2133.15.082.345.1
      t 1
      2133.15.
      Note:
      Order number of spare part for bolt with safety ring:
      2133.15.082.□□□.1
      Order number of spare part for feather key:
      3x 2133.15.082.300.2 for 2133.15.082.300
      2x 2133.15.082.345.2 and 1x 2133.15.082.345.3 for 2133.15.082.345
      Order number of lifting flange with bolt and feather key including
      mounting screws according to BMW norm:
      2133.15.0.082.□□□
      C45
      Order No
      max. carrying capacity
      (2 lifting flanges) [kg]* d 1 d 2 a b c e f k l n p s t u v w d 3 d 4 t 1 e 1 e 2
      Socket head cap screw
      DIN EN ISO 4762
      2133.15.082.300 50000 80 82 300 435 200140120115360 199 30 30 70 100 45 125 39 58 37 21 19 M36x160
      2133.15.082.345 63000 80 82 345 480 240170135130405 220 30 30 50 85 50 130 39 58 37 26 22 M36x200
      *The maximum permissible load capacity is to be calculated such that two lifting flanges one their own are capable of carrying or turning the tool.
      2133.15. Lifting flange with bolt with safety ring, with feather key, to BMW
      subject to alterations
      Die lifting bolt with safety ring, VDI 3366
      Mounting example
      Note:
      It is important to ensure that there is safety clearance on both outer
      sides of the cast cheeks and that there is room for installation on one
      side.
      The lifting bolt must always be introduced from the outside of the tool
      towards the middle.
      2132.10.
      C46
      Order No
      max. carrying capacity
      (2 die lifting bolts) [kg]* d d 1 d 2 d 3 d 4 l 1 l 2 l 3 s s 1
      2132.10.032 6400 40 32 32 13 M10 175 145 10 10 10
      2132.10.040 10000 50 40 40 16 M12 225 188 10 14 13
      2132.10.050 16000 60 50 50 24 M20 273 230 11 16 16
      2132.10.063 25000 75 63 63 30 M24 347 295 14 18 20
      2132.10.076 63000 95 76 76 40 M36 422 360 15 20 27
      *The maximum permissible load capacity is to be calculated such that two bolts on their own are capable of carrying or turning the tool.
      2132.10. Die lifting bolt with safety ring, VDI 3366
      subject to alterations
      Die lifting bolt with safety ring and spring, to VW standard
      1
      s
      +0,2
      s +0,2
      3
      l
      2
      +1
      l
      l 1 +1
      d
      d 1 h11
      d 1 h11
      2132.10.55.
      d 2
      d 1 h11
      Note:
      It is important to ensure that there is safety clearance on both outer
      sides of the cast cheeks and that there is room for installation on one
      side.
      The lifting bolt must always be introduced from the outside of the tool
      towards the middle.
      Mounting example
      C47
      Order No
      max. carrying capacity
      (2 die lifting bolts) [kg]* d d 1 d 2 l 1 l 2 l 3 s s 1
      2132.10.55.032 6400 40 32 21 175 145 10 10 10
      2132.10.55.040 10000 50 40 28 225 188 10 14 13
      2132.10.55.050 16000 60 50 36 273 230 11 16 16
      2132.10.55.063 25000 75 63 45 347 295 14 18 20
      2132.10.55.076 63000 95 76 56 422 360 15 20 27
      *The maximum permissible load capacity is to be calculated such that two bolts on their own are capable of carrying or turning the tool.
      2132.10.55. Die lifting bolt with safety ring and spring, to VW standard
      subject to alterations
      Die lifting bolt with safety ring and spring, CNOMO Standard
      Mounting example
      Note:
      It is important to ensure that there is safety clearance on both outer
      sides of the cast cheeks and that there is room for installation on one
      side.
      The lifting bolt must always be introduced from the outside of the tool
      towards the middle.
      2132.11.
      C48
      Order No
      max. carrying capacity
      (2 die lifting bolts) [kg]* d d 1 d 2 d 3 d 4 l 1 l 2 l 3 s s 1 s 2 t
      2132.11.032 12000 40 32 22 12 25 154 132 6 10 5 11 2.5
      2132.11.040 18000 50 40 28 16 32 197.75 170 8 12.5 6 13.75 3
      2132.11.050 28000 63 50 36 20 40 247.6 212 10 16 8 17.6 4
      2132.11.063 45000 80 63 45 25 50 309 265 12 20 10 22 5
      *The maximum permissible load capacity is to be calculated such that two bolts on their own are capable of carrying or turning the tool.
      2132.11. Die lifting bolt with safety ring and spring, CNOMO Standard
      subject to alterations
      Bush for die lifting bolt
      2132.10.03. .1
      2
      2
      4
      4
      l
      l
      4
      28
      3
      d
      2
      d
      1
      d
      3
      d
      2
      d
      1
      d
      Description:
      Bush for casting-in, for lifting bolts 2132.10./11.
      Material:
      Steel
      Mounting example
      C49
      Order No d 1 d 2 d 3 l Number of grooves
      2132.10.03.032.1.1 32 44 34 40 1
      2132.10.03.040.2.1 40 52 42 50 1
      2132.10.03.050.3.1 50 62 52 60 1
      2132.10.03.063.4.1 63 75 65 80 1
      2132.10.03.076.5.1 76 100 78 100 2
      2132.10.03.076.6.1 76 105 78 100 2
      2132.10.03. .1 Bush for die lifting bolt
      subject to alterations
      Die lifting bolt with safety ring, for lifting flange 2133.12.
      øg
      Mounting example
      Note:
      It is important to ensure that there is safety clearance on both outer
      sides of the cast cheeks and that there is room for installation on one
      side.
      The lifting bolt must always be introduced from the outside of the tool
      towards the middle.
      2133.12. .1
      C50
      Order No
      max. carrying capacity
      (2 die lifting bolts) [kg]* g d d 1 d 2 d 3 d 4 l 1 l 2 l 3 s s 1
      2133.12.016.1 1200 16 25 15.6 15.6 6 M5 102.5 77 6 8 11.5
      2133.12.021.1 2000 21 30 20.6 20.6 7 M6 113.5 86 6 8 13.5
      2133.12.026.1 4000 26 35 25.6 25.6 9 M6 128.5 100 6 9 13.5
      2133.12.034.1 8000 34 43 33 33 12 M8 166.5 135 6 10 15.5
      2133.12.044.1 14000 44 53 43 43 16 M12 210.5 175 8 12 20.5
      *The maximum permissible load capacity is to be calculated such that two bolts on their own are capable of carrying or turning the tool.
      2133.12. .1 Die lifting bolt with safety ring, for lifting flange 2133.12.
      Please request your catalogue
      Lifting systems
      Chain system
      Steel ropes
      Lifting ropes
      Please request your catalogue
      Lifting systems
      Chain system
      Steel ropes
      Lifting ropes
      C51
      subject to alterations
      Clamp, forked shape, DIN 6315-B
      Clamping claw, goose-neck shape
      Material:
      Heat-treated steel, painted
      Note:
      Holding and contact surfaces are plane-parallel. High clamping forces
      can be achieved by using high-strength screws conforming to DIN 787.
      The dimensions of the holding strap should be matched to the strength
      of the bolts.
      Supplied without clamping bolt,
      suitable clamping bolts: 2140.30.
      Material:
      Steel, forged and heat-treated ,
      galvanised and yellow passivated
      Note:
      Clamping claws quickly span very different clamping heigths without
      the need for additional supports and take up very little space on the
      machine table. They are designed for maximum loads and are particu-
      larly suitable for clamping cutting and punching tools.
      Supplied without clamping bolt,
      suitable clamping bolts: 2140.30.
      1
      a
      b 2
      a 2
      b 1
      c
      b 3
      2140.17.
      b 2
      a 2
      m
      h
      1
      a
      k
      f e
      b 1
      2140.15.
      C52
      Order No a 1 a 2 b 1 b 2 b 3 c
      2140.17.09.080 8 9 80 25 8 15
      2140.17.11.100 10 11 100 31 10 20
      2140.17.14.125 12 o. 14 14 125 38 12 25
      2140.17.14.160 12 o. 14 14 160 38 12 25
      2140.17.14.200 12 o. 14 14 200 38 12 25
      2140.17.18.160 16 o. 18 18 160 48 15 30
      2140.17.18.200 16 o. 18 18 200 48 15 30
      2140.17.18.250 16 o. 18 18 250 48 15 40
      2140.17.22.200 20 o. 22 22 200 52 15 40
      2140.17.22.250 20 o. 22 22 250 62 20 40
      2140.17.22.315 20 o. 22 22 315 62 20 40
      2140.17.26.200 24 26 200 66 20 40
      2140.17.26.250 24 26 250 66 20 40
      2140.17.26.315 24 26 315 66 20 40
      Order No a 1 a 2 b 1 b 2 e f k m
      Clamping
      height h
      2140.15.22 20 o. 22 22 200 66 88 112 20 60 25 - 50
      2140.15.26 24 o. 26 26 232 76 97 135 24 70 30 - 70
      2140.15.32 36 32 263 90 107 156 28 80 40 - 75
      2140.17.
      2140.15.
      Clamp, forked shape, DIN 6315-B
      Clamping claw, goose-neck shape
      subject to alterations
      Clamping claw, infinitely variable
      l
      1
      d
      c
      h
      2
      a
      b 2
      b 1
      e
      d
      1
      a
      f
      2140.13.
      k
      e
      m
      h
      c d
      f
      1
      b
      b 2
      a 2
      a 2
      1
      a
      2140.14.
      Material:
      Steel, forged and head-treated, tempered in burnishing clay.
      Note:
      Clamping claws quickly span very different clamping heigths without
      the need for additional supports and take up very little space on the
      machine table. They are designed for maximum loads and are particu-
      larly suitable for clamping cutting and punching tools.
      Supplied with clamping bolt,
      suitable clamping bolts: 2140.30.
      Material:
      Steel, forged and heat-treated ,
      galvanised and yellow passivated
      Note:
      Clamping claws quickly span very different clamping heigths without
      the need for additional supports and take up very little space on the
      machine table. They are designed for maximum loads and are particu-
      larly suitable for clamping cutting and punching tools.
      Supplied without clamping bolt,
      suitable clamping bolts: 2140.30.
      C53
      Order No a 1 a 2 b 1 b 2 c d e f h*
      Clamping bolt
      d 1 x a 1 x l
      2140.13.12.17 12 17 140 50 55 60 30 110 0-50 M12x12x125
      2140.13.14.17 14 17 140 50 55 60 30 110 0-50 M12x14x125
      2140.13.16.17 16 17 140 50 55 60 30 110 0-75 M16x16x160
      2140.13.18.17 18 17 140 50 55 60 30 110 0-75 M16x18x160
      2140.13.16.21 16 21 175 60 70 80 40 135 0-65 M16x16x160
      2140.13.18.21 18 21 175 60 70 80 40 135 0-65 M16x18x160
      2140.13.22.21 22 21 175 60 70 80 40 135 0-85 M20x22x200
      *Clamping height
      Order No a 1 a 2 b 1 b 2 c d e f k m h max
      2140.14.13 12 o. 14 13 88 38 28 48 23 68 14 52 35
      2140.14.18 16 o. 18 18 130 56 38 74 29 101 18 80 55
      2140.14.22 20 o. 22 22 140 66 46 80 32 112 20 98 65
      2140.14.26 24 o. 28 26 174 76 52 100 39 135 24 110 75
      2140.14.32 36 32 200 90 61 110 44 156 28 118 80
      2140.13.
      2140.14.
      Clamping claw, infinitely variable
      Clamping claw, infinitely variable
      subject to alterations
      Clamp, straight, DIN 6314
      Clamp, straight, with setscrew
      Material:
      Heat-treated steel, painted
      Note:
      Holding and contact surfaces are plane-parallel. High clamping forces
      can be achieved by using high-strength screws conforming to DIN 787.
      The dimensions of the holding strap should be matched to the strength
      of the bolts.
      Supplied without clamping bolt,
      suitable clamping bolts: 2140.30.
      2140.16.26.250: c = 35 mm, does not conform to DIN
      Material:
      Heat-treated steel, painted
      Note:
      Supplied with setscrew and clamping bolt for T grooves conforming to
      DIN 787 8.8 with nut and washer.
      a 1
      b 3
      b 2
      a 2
      e 1 e 2
      b 1
      c
      2140.16.
      h
      b 1
      e 1
      b 3
      d 2
      e 2
      d 1
      b 2
      c
      l
      a 1
      a 2
      2140.10.
      C54
      Order No a 1 a 2 b 1 b 2 b 3 c e 1 e 2
      2140.16.09.060 8 9 60 25 10 12 13 22
      2140.16.11.080 10 11 80 30 12 15 15 30
      2140.16.14.100 12 o. 14 14 100 40 14 20 21 40
      2140.16.14.125 12 o. 14 14 125 40 14 20 21 50
      2140.16.18.125 16 o. 18 18 125 50 18 25 26 45
      2140.16.18.160 16 o. 18 18 160 50 18 25 26 65
      2140.16.22.160 20 o. 22 22 160 60 22 30 30 60
      2140.16.22.200 20 o. 22 22 200 60 22 30 30 80
      2140.16.26.200 24 26 200 70 26 30 35 80
      2140.16.26.250 24 26 250 70 26 35 35 105
      Order No a 1 a 2 b 1 b 2 b 3 c d 1, 2 e 1 e 2 h*
      Clamping bolt
      d 1 x a 1 x l
      2140.10.10 10 11 80 30 12 15 M10 15 30 8 - 32 M10x10x80
      2140.10.12 12 14 100 40 14 20 M12 21 40 10 - 40 M12x12x100
      2140.10.14 14 14 100 40 14 20 M12 21 40 10 - 38 M12x14x100
      2140.10.16 16 18 125 50 18 25 M16 26 45 13 - 49 M16x16x125
      2140.10.18 18 18 125 50 18 25 M16 26 45 13 - 46 M16x18x125
      2140.10.20 20 22 160 60 22 30 M20 30 60 16 - 65 M20x20x160
      2140.10.22 22 22 160 60 22 30 M20 30 60 16 - 65 M20x22x160
      *Clamping height depends on the groove depth
      2140.16.
      2140.10.
      Clamp, straight, DIN 6314
      Clamp, straight, with setscrew
      subject to alterations
      Clamp, goose neck shape, DIN 6316
      Clamp, goose neck shape, with setscrew
      e 1 e 2
      e 3
      2c
      b 2
      b 1
      c
      b 3
      a 1
      a 2
      2140.18.
      h
      d 2
      e 1 e 2
      e 3
      2c
      d 1
      b 2
      b 1
      c
      b 3
      l
      a 1
      a 2
      2140.11.
      Material:
      Heat-treated steel, painted
      Note:
      Holding and contact surfaces are plane-parallel. High clamping forces
      can be achieved by using high-strength screws conforming to DIN 787.
      The dimensions of the holding strap should be matched to the strength
      of the bolts.
      Supplied without clamping bolt,
      suitable clamping bolts: 2140.30.
      2140.18.26.250: c = 35 mm, does not conform to DIN
      Material:
      Heat-treated steel, painted
      Note:
      Supplied with setscrew and clamping bolt for T grooves conforming to
      DIN 787 8.8 with nut and washer.
      C55
      Order No a 1 a 2 b 1 b 2 b 3 c e 1 e 2 e 3
      2140.18.09.080 8 9 80 25 12 12 25 25 9
      2140.18.11.100 10 11 100 30 15 15 32 32 12
      2140.18.14.125 12 o. 14 14 125 40 20 20 40 40 16
      2140.18.18.125 16 o. 18 18 125 50 25 25 49 40 20
      2140.18.18.160 16 o. 18 18 160 50 25 25 49 50 20
      2140.18.22.160 20 o. 22 22 160 60 30 30 55 55 24
      2140.18.22.200 20 o. 22 22 200 60 30 30 55 70 24
      2140.18.26.200 24 26 200 70 35 30 72 60 28
      2140.18.26.250 24 26 250 70 35 35 72 80 28
      Order No a 1 a 2 b 1 b 2 b 3 ,c d 1, 2 e 1 e 2 e 3 h*
      Clamping bolt
      d 1 x a 1 x l
      2140.11.10 10 11 100 30 15 M10 32 32 12 22 - 46 M10x10x80
      2140.11.12 12 14 125 40 20 M12 40 40 16 28 - 58 M12x12x100
      2140.11.14 14 14 125 40 20 M12 40 40 16 28 - 56 M12x14x100
      2140.11.16 16 18 160 50 25 M16 49 50 20 36 - 72 M16x16x125
      2140.11.18 18 18 160 50 25 M16 49 50 20 36 - 69 M16x18x125
      2140.11.20 20 22 200 60 30 M20 55 70 24 43 - 92 M20x20x160
      2140.11.22 22 22 200 60 30 M20 55 70 24 43 - 92 M20x22x160
      *Clamping height depends on the groove depth
      2140.18.
      2140.11. Clamp, goose neck shape, with
      setscrew
      Clamp, goose neck shape, DIN 6316
      subject to alterations
      Support, adjustable
      Stepped Block DIN 6318
      Material:
      Heat-treated steel, painted
      Note:
      Centring hole diameter 12 mm. Spindle with self-locking trapezoidal
      thread and end lock.
      Material:
      Engineering cast iron, painted.
      Note:
      Holding and contact surfaces are plane-parallel. High clamping forces
      can be achieved by using high-strength screws conforming to DIN 787.
      The dimensions of the holding strap should be matched to the strength
      of the bolts.
      h
      1
      h
      12
      2
      d
      1
      d
      2140.20.
      b
      b 1
      15
      15 15 20
      15 h 15
      a
      h
      7,5
      15
      37,5
      30
      90
      a
      2140.19.
      A
      B
      C56
      Order No h h 1 d 1 d 2 F max [daN]
      2140.20.042 42 52 50 50 6000
      2140.20.050 50 70 50 50 6000
      2140.20.070 70 100 50 50 6000
      2140.20.100 100 140 65 70 10000
      2140.20.140 140 210 70 80 17000
      2140.20.190 190 300 80 100 35000
      Order No Ordering size a b b 1 h Shape
      2140.19.050.050 50 42.5 50 50 12.5 A
      2140.19.095.050 95 95 50 55 57.5 B
      2140.19.140.050 140 100 50 60 102.5 B
      2140.19.185.050 185 105 50 65 147.5 B
      2140.19.230.050 230 110 50 70 192.5 B
      2140.19.275.050 275 115 50 75 237.5 B
      2140.19.050.080 50 42.5 80 80 12.5 A
      2140.19.095.080 95 95 80 85 57.5 B
      2140.19.140.080 140 100 80 90 102.5 B
      2140.20.
      2140.19. Stepped Block DIN 6318
      Support, adjustable
      subject to alterations
      Set screw
      Hexagon Nut DIN 6330 B
      k
      3
      d
      M
      d 2
      l
      2140.02.
      m
      e
      s
      M
      2140.32.
      Material:
      heat-treated, strength class 8.8
      Material:
      heat-treated, strength class 10.9
      Note:
      Use washers conforming to DIN 6340.
      C57
      Order No M d 2 d 3 k l
      2140.02.10 M10 16 30 8 39
      2140.02.12 M12 20 36 10 48
      2140.02.16 M16 25 42 13 55
      2140.02.20 M20 25 50 16 69
      2140.02.24 M24 34 60 20 87
      Order No M e m s
      2140.32.08 M8 15 12 13
      2140.32.10 M10 18.4 15 16
      2140.32.12 M12 20.7 18 18
      2140.32.14 M14 24.2 21 21
      2140.32.16 M16 27.7 24 24
      2140.32.18 M18 31.2 27 27
      2140.32.20 M20 34.6 30 30
      2140.32.22 M22 39.2 33 34
      2140.32.24 M24 41.5 36 36
      2140.32.30 M30 53.1 45 46
      2140.02.
      2140.32. Hexagon Nut DIN 6330 B
      Set screw
      subject to alterations
      Hexagon nut with collar, DIN 6331
      Washer DIN 6340
      Material:
      heat-treated, strength class 10.9
      Execution:
      turned and milled
      Note:
      Thread length 1,5 x M
      Material:
      heat-treated, strength 1200–1400 N/mm²
      a
      d 1
      m
      e
      s
      M
      2140.33.
      1
      d
      2
      d
      s
      2140.34.
      C58
      Order No M a d 1 e m s
      2140.33.08 M8 3.5 18 15 12 13
      2140.33.10 M10 4 22 18.4 15 16
      2140.33.12 M12 4 25 20.7 18 18
      2140.33.14 M14 4.5 28 24.2 21 21
      2140.33.16 M16 5 31 27.7 24 24
      2140.33.18 M18 5 34 31.2 27 27
      2140.33.20 M20 6 37 34.6 30 30
      2140.33.22 M22 6 40 39.2 33 34
      2140.33.24 M24 6 45 41.5 36 36
      2140.33.30 M30 6 58 53.1 45 46
      Order No M d 1 d 2 s
      2140.34.08 M8 8.4 23 4
      2140.34.10 M10 10.5 28 4
      2140.34.12 M12 13 35 5
      2140.34.14 M14 15 40 5
      2140.34.16 M16 17 45 6
      2140.34.18 M18 19 45 6
      2140.34.20 M20 21 50 6
      2140.34.22 M22 23 50 8
      2140.34.24 M24 25 60 8
      2140.34.30 M30 31 68 10
      2140.33.
      2140.34.
      Hexagon nut with collar, DIN 6331
      Washer DIN 6340
      subject to alterations
      Screw for T-slot, DIN 787
      a
      1
      a
      1
      d
      b
      l k
      e
      2140.30.
      Material:
      heat-treated,
      M 8 – M12 to strength class 10.9
      M14 – M30 to strength class 8.8
      Execution:
      forged, thread rolled, T-slot milled
      C59
      Order No a 1 a b d 1 e k l Order No a 1 a b d 1 e k l
      2140.30.08.08.032 8 7.7 22 M8 13 6 32 2140.30.20.20.100 20 19.7 65 M20 32 12 100
      2140.30.08.08.050 8 7.7 35 M8 13 6 50 2140.30.20.20.125 20 19.7 85 M20 32 12 125
      2140.30.08.08.080 8 7.7 50 M8 13 6 80 2140.30.20.20.160 20 19.7 110 M20 32 12 160
      2140.30.10.10.040 10 9.7 30 M10 15 6 40 2140.30.20.20.200 20 19.7 125 M20 32 12 200
      2140.30.10.10.063 10 9.7 45 M10 15 6 63 2140.30.20.20.250 20 19.7 150 M20 32 12 250
      2140.30.10.10.100 10 9.7 60 M10 15 6 100 2140.30.20.20.315 20 19.7 190 M20 32 12 315
      2140.30.12.12.050 12 11.7 35 M12 18 7 50 2140.30.20.22.080 22 21.7 55 M20 35 14 80
      2140.30.12.12.063 12 11.7 40 M12 18 7 63 2140.30.20.22.100 22 21.7 65 M20 35 14 100
      2140.30.12.12.080 12 11.7 55 M12 18 7 80 2140.30.20.22.125 22 21.7 85 M20 35 14 125
      2140.30.12.12.125 12 11.7 75 M12 18 7 125 2140.30.20.22.160 22 21.7 110 M20 35 14 160
      2140.30.12.12.200 12 11.7 120 M12 18 7 200 2140.30.20.22.200 22 21.7 125 M20 35 14 200
      2140.30.12.14.050 14 13.7 35 M12 22 8 50 2140.30.20.22.250 22 21.7 150 M20 35 14 250
      2140.30.12.14.063 14 13.7 45 M12 22 8 63 2140.30.20.22.315 22 21.7 190 M20 35 14 315
      2140.30.12.14.080 14 13.7 55 M12 22 8 80 2140.30.24.24.100 24 23.7 70 M24 40 16 100
      2140.30.12.14.125 14 13.7 75 M12 22 8 125 2140.30.24.24.125 24 23.7 85 M24 40 16 125
      2140.30.12.14.200 14 13.7 120 M12 22 8 200 2140.30.24.24.160 24 23.7 110 M24 40 16 160
      2140.30.14.16.063 16 15.7 45 M14 25 9 63 2140.30.24.24.200 24 23.7 125 M24 40 16 200
      2140.30.14.16.100 16 15.7 65 M14 25 9 100 2140.30.24.24.250 24 23.7 150 M24 40 16 250
      2140.30.14.16.160 16 15.7 125 M14 25 9 160 2140.30.24.24.315 24 23.7 190 M24 40 16 315
      2140.30.14.16.250 16 15.7 150 M14 25 9 250 2140.30.24.24.400 24 23.7 240 M24 40 16 400
      2140.30.16.16.063 16 15.7 45 M16 25 9 63 2140.30.24.28.100 28 27.7 70 M24 44 18 100
      2140.30.16.16.080 16 15.7 55 M16 25 9 80 2140.30.24.28.125 28 27.7 85 M24 44 18 125
      2140.30.16.16.100 16 15.7 65 M16 25 9 100 2140.30.24.28.160 28 27.7 110 M24 44 18 160
      2140.30.16.16.160 16 15.7 100 M16 25 9 160 2140.30.24.28.200 28 27.7 125 M24 44 18 200
      2140.30.16.16.200 16 15.7 125 M16 25 9 200 2140.30.24.28.250 28 27.7 150 M24 44 18 250
      2140.30.16.16.250 16 15.7 150 M16 25 9 250 2140.30.24.28.315 28 27.7 190 M24 44 18 315
      2140.30.16.18.063 18 17.7 45 M16 28 10 63 2140.30.24.28.400 28 27.7 240 M24 44 18 400
      2140.30.16.18.080 18 17.7 55 M16 28 10 80 2140.30.30.36.125 36 35.6 80 M30 54 22 125
      2140.30.16.18.100 18 17.7 65 M16 28 10 100 2140.30.30.36.160 36 35.6 110 M30 54 22 160
      2140.30.16.18.160 18 17.7 100 M16 28 10 160 2140.30.30.36.200 36 35.6 135 M30 54 22 200
      2140.30.16.18.200 18 17.7 125 M16 28 10 200 2140.30.30.36.250 36 35.6 150 M30 54 22 250
      2140.30.16.18.250 18 17.7 150 M16 28 10 250 2140.30.30.36.315 36 35.6 200 M30 54 22 315
      2140.30.20.20.080 20 19.7 55 M20 32 12 80 2140.30.30.36.500 36 35.6 300 M30 54 22 500
      2140.30. Screw for T-slot, DIN 787
      subject to alterations
      Hexagon socket head cap screw, DIN EN ISO 4762 - Strength class 8.8
      s
      d
      M
      1
      l
      l k
      2192.10.
      C60
      Order No M l l 1 d k s Order No M l l 1 d k s
      2192.10.04.012 M4 12 10 7 4 3 2192.10.10.050 M10 50 32 16 10 8
      2192.10.04.016 M4 16 14 7 4 3 2192.10.10.060 M10 60 32 16 10 8
      2192.10.04.020 M4 20 18 7 4 3 2192.10.12.025 M12 25 20 18 12 10
      2192.10.04.025 M4 25 23 7 4 3 2192.10.12.030 M12 30 25 18 12 10
      2192.10.05.020 M5 20 18 8.5 5 4 2192.10.12.035 M12 35 30 18 12 10
      2192.10.05.025 M5 25 23 8.5 5 4 2192.10.12.040 M12 40 35 18 12 10
      2192.10.05.030 M5 30 22 8.5 5 4 2192.10.12.045 M12 45 40 18 12 10
      2192.10.06.016 M6 16 13 10 6 5 2192.10.12.050 M12 50 45 18 12 10
      2192.10.06.020 M6 20 17 10 6 5 2192.10.12.070 M12 70 36 18 12 10
      2192.10.06.025 M6 25 22 10 6 5 2192.10.12.080 M12 80 36 18 12 10
      2192.10.06.030 M6 30 27 10 6 5 2192.10.16.030 M16 30 24 24 16 14
      2192.10.06.035 M6 35 24 10 6 5 2192.10.16.035 M16 35 29 24 16 14
      2192.10.06.040 M6 40 24 10 6 5 2192.10.16.040 M16 40 34 24 16 14
      2192.10.06.045 M6 45 24 10 6 5 2192.10.16.045 M16 45 39 24 16 14
      2192.10.06.050 M6 50 24 10 6 5 2192.10.16.050 M16 50 44 24 16 14
      2192.10.06.055 M6 55 24 10 6 5 2192.10.16.055 M16 55 49 24 16 14
      2192.10.06.060 M6 60 24 10 6 5 2192.10.16.060 M16 60 54 24 16 14
      2192.10.06.070 M6 70 24 10 6 5 2192.10.16.100 M16 100 44 24 16 14
      2192.10.06.080 M6 80 24 10 6 5 2192.10.20.050 M20 50 42 30 20 17
      2192.10.06.090 M6 90 24 10 6 5 2192.10.20.060 M20 60 52 30 20 17
      2192.10.08.016 M8 16 12 13 8 6 2192.10.20.070 M20 70 62 30 20 17
      2192.10.08.020 M8 20 16 13 8 6 2192.10.20.090 M20 90 52 30 20 17
      2192.10.08.025 M8 25 21 13 8 6 2192.10.20.120 M20 120 52 30 20 17
      2192.10.08.030 M8 30 26 13 8 6 2192.10.24.060 M24 60 51 36 24 19
      2192.10.08.035 M8 35 31 13 8 6 2192.10.24.070 M24 70 61 36 24 19
      2192.10.08.040 M8 40 28 13 8 6 2192.10.24.080 M24 80 71 36 24 19
      2192.10.08.045 M8 45 28 13 8 6 2192.10.24.100 M24 100 60 36 24 19
      2192.10.08.050 M8 50 28 13 8 6 2192.10.24.120 M24 120 60 36 24 19
      2192.10.08.060 M8 60 28 13 8 6 2192.10.24.140 M24 140 60 36 24 19
      2192.10.10.016 M10 16 11 16 10 8 2192.10.30.140 M30 140 72 45 30 22
      2192.10.10.020 M10 20 15 16 10 8 2192.10.36.120 M36 120 84 54 36 27
      2192.10.10.025 M10 25 20 16 10 8 2192.10.36.160 M36 160 84 54 36 27
      2192.10.10.030 M10 30 25 16 10 8 2192.10.36.180 M36 180 84 54 36 27
      2192.10.10.035 M10 35 30 16 10 8 2192.10.36.200 M36 200 84 54 36 27
      2192.10.10.040 M10 40 35 16 10 8
      2192.10. Hexagon socket head cap screw, DIN EN ISO 4762 - Strength class 8.8
      subject to alterations
      Hexagon socket head cap screw, DIN EN ISO 4762 - Strength class 12.9
      2192.12.
      C61
      Order No M l l 1 d k s Order No M l l 1 d k s Order No M l l 1 d k s
      2192.12.03.008 M3 8 6 5.5 3 2.5 2192.12.10.055 M10 55 32 16 10 8 2192.12.16.120 M16 120 44 24 16 14
      2192.12.04.010 M4 10 8 7 4 3 2192.12.10.060 M10 60 32 16 10 8 2192.12.16.130 M16 130 44 24 16 14
      2192.12.06.010 M6 10 7 10 6 5 2192.12.10.065 M10 65 32 16 10 8 2192.12.16.140 M16 140 44 24 16 14
      2192.12.06.020 M6 20 17 10 6 5 2192.12.10.070 M10 70 32 16 10 8 2192.12.16.150 M16 150 44 24 16 14
      2192.12.06.025 M6 25 22 10 6 5 2192.12.10.075 M10 75 32 16 10 8 2192.12.16.160 M16 160 44 24 16 14
      2192.12.06.030 M6 30 27 10 6 5 2192.12.10.080 M10 80 32 16 10 8 2192.12.16.180 M16 180 44 24 16 14
      2192.12.06.035 M6 35 24 10 6 5 2192.12.10.090 M10 90 32 16 10 8 2192.12.16.200 M16 200 44 24 16 14
      2192.12.06.040 M6 40 24 10 6 5 2192.12.10.100 M10 100 32 16 10 8 2192.12.16.220 M16 220 44 24 16 14
      2192.12.06.045 M6 45 24 10 6 5 2192.12.10.110 M10 110 32 16 10 8 2192.12.16.240 M16 240 44 24 16 14
      2192.12.06.050 M6 50 24 10 6 5 2192.12.10.120 M10 120 32 16 10 8 2192.12.16.260 M16 260 44 24 16 14
      2192.12.06.055 M6 55 24 10 6 5 2192.12.10.130 M10 130 32 16 10 8 2192.12.16.280 M16 280 44 24 16 14
      2192.12.06.060 M6 60 24 10 6 5 2192.12.10.150 M10 150 32 16 10 8 2192.12.16.300 M16 300 44 24 16 14
      2192.12.06.070 M6 70 24 10 6 5 2192.12.10.180 M10 180 32 16 10 8 2192.12.20.100 M20 100 52 30 20 17
      2192.12.06.080 M6 80 24 10 6 5 2192.12.10.220 M10 220 32 16 10 8 2192.12.20.110 M20 110 52 30 20 17
      2192.12.06.085 M6 85 24 10 6 5 2192.12.12.040 M12 40 35 18 12 10 2192.12.20.120 M20 120 52 30 20 17
      2192.12.06.090 M6 90 24 10 6 5 2192.12.12.045 M12 45 40 18 12 10 2192.12.20.130 M20 130 52 30 20 17
      2192.12.06.100 M6 100 24 10 6 5 2192.12.12.050 M12 50 45 18 12 10 2192.12.20.140 M20 140 52 30 20 17
      2192.12.06.160 M6 160 24 10 6 5 2192.12.12.055 M12 55 36 18 12 10 2192.12.20.150 M20 150 52 30 20 17
      2192.12.06.200 M6 200 24 10 6 5 2192.12.12.060 M12 60 36 18 12 10 2192.12.20.160 M20 160 52 30 20 17
      2192.12.08.016 M8 16 12 13 8 6 2192.12.12.070 M12 70 36 18 12 10 2192.12.20.180 M20 180 52 30 20 17
      2192.12.08.030 M8 30 26 13 8 6 2192.12.12.080 M12 80 36 18 12 10 2192.12.20.190 M20 190 52 30 20 17
      2192.12.08.035 M8 35 31 13 8 6 2192.12.12.090 M12 90 36 18 12 10 2192.12.20.200 M20 200 52 30 20 17
      2192.12.08.040 M8 40 28 13 8 6 2192.12.12.100 M12 100 36 18 12 10 2192.12.20.220 M20 220 52 30 20 17
      2192.12.08.045 M8 45 28 13 8 6 2192.12.12.110 M12 110 36 18 12 10 2192.12.20.230 M20 230 52 30 20 17
      2192.12.08.050 M8 50 28 13 8 6 2192.12.12.120 M12 120 36 18 12 10 2192.12.20.240 M20 240 52 30 20 17
      2192.12.08.055 M8 55 28 13 8 6 2192.12.12.130 M12 130 36 18 12 10 2192.12.20.260 M20 260 52 30 20 17
      2192.12.08.060 M8 60 28 13 8 6 2192.12.12.140 M12 140 36 18 12 10 2192.12.20.280 M20 280 52 30 20 17
      2192.12.08.070 M8 70 28 13 8 6 2192.12.12.150 M12 150 36 18 12 10 2192.12.20.300 M20 300 52 30 20 17
      2192.12.08.075 M8 75 28 13 8 6 2192.12.12.180 M12 180 36 18 12 10 2192.12.24.120 M24 120 60 36 24 19
      2192.12.08.080 M8 80 28 13 8 6 2192.12.12.220 M12 220 36 18 12 10 2192.12.24.130 M24 130 60 36 24 19
      2192.12.08.090 M8 90 28 13 8 6 2192.12.16.040 M16 40 34 24 16 14 2192.12.24.140 M24 140 60 36 24 19
      2192.12.08.100 M8 100 28 13 8 6 2192.12.16.050 M16 50 44 24 16 14 2192.12.24.150 M24 150 60 36 24 19
      2192.12.08.110 M8 110 28 13 8 6 2192.12.16.060 M16 60 54 24 16 14 2192.12.24.160 M24 160 60 36 24 19
      2192.12.08.120 M8 120 28 13 8 6 2192.12.16.065 M16 65 44 24 16 14 2192.12.24.180 M24 180 60 36 24 19
      2192.12.10.030 M10 30 25 16 10 8 2192.12.16.070 M16 70 44 24 16 14 2192.12.24.200 M24 200 60 36 24 19
      2192.12.10.035 M10 35 30 16 10 8 2192.12.16.080 M16 80 44 24 16 14 2192.12.30.140 M30 140 72 45 30 22
      2192.12.10.040 M10 40 35 16 10 8 2192.12.16.090 M16 90 44 24 16 14 2192.12.30.160 M30 160 72 45 30 22
      2192.12.10.045 M10 45 32 16 10 8 2192.12.16.100 M16 100 44 24 16 14
      2192.12.10.050 M10 50 32 16 10 8 2192.12.16.110 M16 110 44 24 16 14
      2192.12. Hexagon socket head cap screw, DIN EN ISO 4762 - Strength class 12.9
      subject to alterations
      Hexagon socket head cap screw, with low profile head and key guide,
      DIN 6912 - Strength class 8.8
      M
      1
      l
      l k
      d
      s
      2192.20.
      C62
      Order No M l l 1 d k s Order No M l l 1 d k s
      2192.20.04.008 M4 8 6 7 2.8 3 2192.20.06.035 M6 35 18 10 4 5
      2192.20.04.010 M4 10 8 7 2.8 3 2192.20.06.040 M6 40 18 10 4 5
      2192.20.04.012 M4 12 10 7 2.8 3 2192.20.06.045 M6 45 18 10 4 5
      2192.20.04.016 M4 16 14 7 2.8 3 2192.20.06.050 M6 50 18 10 4 5
      2192.20.04.020 M4 20 14 7 2.8 3 2192.20.08.012 M8 12 7.3 13 5 6
      2192.20.04.025 M4 25 14 7 2.8 3 2192.20.08.016 M8 16 11.3 13 5 6
      2192.20.04.030 M4 30 14 7 2.8 3 2192.20.08.018 M8 18 13.3 13 5 6
      2192.20.04.035 M4 35 14 7 2.8 3 2192.20.08.020 M8 20 15.3 13 5 6
      2192.20.04.040 M4 40 14 7 2.8 3 2192.20.08.025 M8 25 20.3 13 5 6
      2192.20.05.008 M5 8 5.4 8.5 3.5 4 2192.20.08.030 M8 30 22 13 5 6
      2192.20.05.010 M5 10 7.4 8.5 3.5 4 2192.20.08.035 M8 35 22 13 5 6
      2192.20.05.012 M5 12 9.4 8.5 3.5 4 2192.20.08.040 M8 40 22 13 5 6
      2192.20.05.020 M5 20 17.4 8.5 3.5 4 2192.20.08.045 M8 45 22 13 5 6
      2192.20.05.025 M5 25 16 8.5 3.5 4 2192.20.08.050 M8 50 22 13 5 6
      2192.20.05.030 M5 30 16 8.5 3.5 4 2192.20.08.060 M8 60 22 13 5 6
      2192.20.05.035 M5 35 16 8.5 3.5 4 2192.20.10.020 M10 20 14.5 16 6.5 8
      2192.20.05.040 M5 40 16 8.5 3.5 4 2192.20.10.025 M10 25 19.5 16 6.5 8
      2192.20.06.008 M6 8 4.3 10 4 5 2192.20.10.030 M10 30 25.5 16 6.5 8
      2192.20.06.010 M6 10 6.3 10 4 5 2192.20.10.060 M10 60 26 16 6.5 8
      2192.20.06.012 M6 12 8.3 10 4 5 2192.20.10.080 M10 80 26 16 6.5 8
      2192.20.06.016 M6 16 12.3 10 4 5 2192.20.10.090 M10 90 26 16 6.5 8
      2192.20.06.018 M6 18 14.3 10 4 5 2192.20.12.030 M12 30 20 18 7.5 10
      2192.20.06.020 M6 20 16.3 10 4 5 2192.20.12.035 M12 35 25 18 7.5 10
      2192.20.06.025 M6 25 21.3 10 4 5 2192.20.16.040 M16 40 0 24 8 14
      2192.20.06.030 M6 30 18 10 4 5
      2192.20. Hexagon socket head cap screw, with low profile head and key guide, DIN 6912 -
      Strength class 8.8
      subject to alterations
      Hexagon socket head cap screw, with low profile head, DIN 7984 -
      Strength class 8.8
      1
      l
      k
      s
      d
      M
      l
      2192.40.
      C63
      Order No M l l 1 d k s Order No M l l 1 d k s
      2192.40.04.008 M4 8 5.9 7 2.8 2.5 2192.40.06.025 M6 25 22 10 4 4
      2192.40.04.010 M4 10 7.9 7 2.8 2.5 2192.40.06.030 M6 30 18 10 4 4
      2192.40.04.012 M4 12 9.9 7 2.8 2.5 2192.40.06.035 M6 35 18 10 4 4
      2192.40.04.016 M4 16 13.9 7 2.8 2.5 2192.40.06.040 M6 40 18 10 4 4
      2192.40.04.020 M4 20 17.9 7 2.8 2.5 2192.40.08.012 M8 12 8.25 13 5 5
      2192.40.04.025 M4 25 14 7 2.8 2.5 2192.40.08.016 M8 16 12.25 13 5 5
      2192.40.04.030 M4 30 14 7 2.8 2.5 2192.40.08.020 M8 20 16.25 13 5 5
      2192.40.04.035 M4 35 14 7 2.8 2.5 2192.40.08.025 M8 25 21.25 13 5 5
      2192.40.04.040 M4 40 14 7 2.8 2.5 2192.40.08.030 M8 30 26.25 13 5 5
      2192.40.05.008 M5 8 0 8.5 3.5 3 2192.40.08.035 M8 35 22 13 5 5
      2192.40.05.010 M5 10 7.6 8.5 3.5 3 2192.40.08.040 M8 40 22 13 5 5
      2192.40.05.012 M5 12 9.6 8.5 3.5 3 2192.40.08.045 M8 45 22 13 5 5
      2192.40.05.016 M5 16 13.6 8.5 3.5 3 2192.40.08.050 M8 50 22 13 5 5
      2192.40.05.020 M5 20 17.6 8.5 3.5 3 2192.40.08.060 M8 60 22 13 5 5
      2192.40.05.025 M5 25 22.6 8.5 3.5 3 2192.40.10.020 M10 20 15.5 16 6 7
      2192.40.05.030 M5 30 16 8.5 3.5 3 2192.40.10.025 M10 25 20.5 16 6 7
      2192.40.05.035 M5 35 16 8.5 3.5 3 2192.40.10.030 M10 30 25.5 16 6 7
      2192.40.05.040 M5 40 16 8.5 3.5 3 2192.40.10.060 M10 60 26 16 6 7
      2192.40.06.010 M6 10 7 10 4 4 2192.40.10.080 M10 80 26 16 6 7
      2192.40.06.012 M6 12 9 10 4 4 2192.40.10.090 M10 90 26 16 6 7
      2192.40.06.016 M6 16 13 10 4 4 2192.40.12.030 M12 30 24.75 18 7 8
      2192.40.06.020 M6 20 17 10 4 4 2192.40.12.035 M12 35 29.75 18 7 8
      2192.40. Hexagon socket head cap screw, with low profile head, DIN 7984 - Strength class 8.8
      subject to alterations
      Hexagon socket countersunk head cap screw, ISO 10642 -
      Strength class 8.8
      l g
      90°
      d
      k
      l
      M
      s
      2192.30.
      C64
      Order No M l l g d k s
      2192.30.03.006 M3 6 3.2 6 1.7 2
      2192.30.03.008 M3 8 3.2 6 1.7 2
      2192.30.03.010 M3 10 3.2 6 1.7 2
      2192.30.04.008 M4 8 4.4 8 2.3 2.5
      2192.30.05.010 M5 10 5.2 10 2.8 3
      2192.30.05.012 M5 12 5.2 10 2.8 3
      2192.30.06.010 M6 10 6.3 12 3.3 4
      2192.30.06.012 M6 12 6.3 12 3.3 4
      2192.30.06.016 M6 16 6.3 12 3.3 4
      2192.30.06.020 M6 20 6.3 12 3.3 4
      2192.30.06.025 M6 25 6.3 12 3.3 4
      2192.30.08.016 M8 16 8.2 16 4.4 5
      2192.30.08.020 M8 20 8.2 16 4.4 5
      2192.30.08.025 M8 25 8.2 16 4.4 5
      2192.30.10.020 M10 20 10 20 5.5 6
      2192.30.10.025 M10 25 10 20 5.5 6
      2192.30.10.040 M10 40 10 20 5.5 6
      2192.30.12.030 M12 30 11.8 24 6.5 8
      2192.30.12.050 M12 50 11.8 24 6.5 8
      2192.30. Hexagon socket countersunk head cap screw, ISO 10642 - Strength class 8.8
      subject to alterations
      Flat mushroom head screw with hexagon socket
      c
      R
      k
      s
      a
      d l
      M
      a
      d
      2192.61.
      2052.70.
      Mounting example
      Material:
      Strength class 10.9 = Code No 1.
      C65
      Order No M l k s c a d a d R
      2192.61.06.012 M6 12 3.2 4 1.2 2 7 13.27 5.6
      2192.61.06.016 M6 16 3.2 4 1.2 2 7 13.27 5.6
      2192.61.06.020 M6 20 3.2 4 1.2 2 7 13.27 5.6
      2192.61.08.016 M8 16 4.3 5 1.5 2.5 9.2 17.77 7.5
      2192.61.08.020 M8 20 4.3 5 1.5 2.5 9.2 17.77 7.5
      2192.61.08.025 M8 25 4.3 5 1.5 2.5 9.2 17.77 7.5
      2192.61.10.020 M10 20 5.3 6 1.75 3 11.2 22.18 10
      2192.61. Flat mushroom head screw with hexagon socket
      subject to alterations
      Screw plug
      Description:
      Repair solution:
      Screw plugs are used to seal off defective boreholes, pass-through holes
      or shrink holes.
      Note:
      Screw in the screw plug as far as it will go (minimum screw-in length
      =diameter).
      The screw plug can be secured to prevent it becoming loose during
      reworking by applying, for example, high-strength LOCTITE® (order no.
      281.270).
      Remove width across flats and protubing thread mechanically.
      3
      ød
      b
      SW
      50
      42
      10
      1x45°
      50°
      øc
      M
      2192.90.
      C66
      Order No Material M b c d SW*
      2192.90.1.12.150 C15 (1.0401) M12x1,5 12 8 8.5 10
      2192.90.1.16.150 C15 (1.0401) M16x1,5 16 10 12.5 12
      2192.90.1.20.150 C15 (1.0401) M20x1,5 20 12 16.5 17
      2192.90.1.24.150 C15 (1.0401) M24x1,5 24 14 20.5 19
      2192.90.1.28.150 C15 (1.0401) M28x1,5 28 14 24.5 22
      2192.90.1.30.150 C15 (1.0401) M30x1,5 30 12 27.4 22
      2192.90.1.32.150 C15 (1.0401) M32x1,5 32 14 28.5 22
      2192.90.2.12.150 GG25 (EN-GJL-250) M12x1,5 12 8 8.5 10
      2192.90.2.16.150 GG25 (EN-GJL-250) M16x1,5 16 10 12.5 12
      2192.90.2.20.150 GG25 (EN-GJL-250) M20x1,5 20 12 16.5 17
      2192.90.2.24.150 GG25 (EN-GJL-250) M24x1,5 24 14 20.5 19
      2192.90.2.28.150 GG25 (EN-GJL-250) M28x1,5 28 14 24.5 22
      2192.90.2.30.150 GG25 (EN-GJL-250) M30x1,5 30 12 27.4 22
      2192.90.2.32.150 GG25 (EN-GJL-250) M32x1,5 32 14 28.5 22
      *SW = width across flats
      2192.90. Screw plug
      subject to alterations C67

      ...10.10 ...12.12 ...12.14 ...16.16 ...16.18
      M 10⊗10 M 12⊗12 M 12⊗14 M 16⊗16 M 16⊗18
      1 2 3 2 3 2 3 2 3 2 3
      4 4 2 4 4 4 4 4 4 4 4
      11⊗80 14⊗100 14⊗100 18⊗125 18⊗125
      4 4 4 4 4
      100 63 40 125 80 50 125 80 50 160 100 63 160 100 63
      4 4 2 4 4 2 4 4 2 4 4 2 4 4 2
      80 100 100 125 125
      4 4 4 4 4
      M10 M12 M12 M16 M16
      6 6 6 6 6
      M10 M12 M12 M16 M16
      6 6 6 6 6
      M10 M12 M12 M16 M16
      4 4 4 4 4
      12 12 14 16 18
      4 4 4 4 4
      - - 14-20 14-20 14-20
      - - 1 1 1
      16⊗16 18⊗18 18⊗18 24⊗24 24⊗24
      1 1 1 1 1
      1 1 1 1 1
      subject to alterations
      Clamping tool set
      Clamping tool set
      with clamping jaws and screw paste.
      The clamping tool set is designed for machine tools with bedplates that
      have fixing slots and they contain all the necessary components for fast
      clamping of tools, devices and workpieces. All parts are interchangeable
      and complementary to each other. They are made of high tensile steel to
      DIN or company standards. Bolt items strength class 8 or 10. The wooden
      box has a detachable hinged cover.
      2140.01.01. Clamping tool set
      Order No
      2140.01.01...
      Contents
      Universal-
      clamping units
      Size
      No.
      Step clamps
      Size
      No.
      Screws for fixing slots
      DIN 787
      (Order No 2140.30.)
      Size
      No.
      Pin screws
      Size
      No.
      Hexagonal nuts
      1.5 d deep
      Size
      No.
      Conical sockets,
      similar to DIN
      Size
      No.
      Extension nuts
      3.0 d deep
      Size
      No.
      Clamping jaws,
      type Bulle
      Size
      No.
      T-slot scraper
      Size
      No.
      Ring/open ended
      spanners
      Size
      No.
      Screw paste No.
      C68
      ...10.10 ...12.12 ...12.14 ...16.16 ...16.18 ...20.20 ..20.22 ...20.24
      M 10⊗10 M 12⊗12 M 12⊗14 M 16⊗16 M 16⊗18 M 20⊗20 M 20⊗22 M 20⊗24
      1 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3
      4 4 2 4 4 4 4 4 4 4 4 4 4 4 4 4 4
      11⊗80 14⊗100 14⊗100 18⊗125 18⊗125 22⊗160 22⊗160 22⊗160
      4 4 4 4 4 4 4 4
      100 63 125 80 125 80 160 100 160 100 200 125 200 125 -
      4 4 4 4 4 4 4 4 4 4 4 4 4 4 -
      80 100 100 125 125 125 125 200 125
      4 4 4 4 4 4 4 4 8
      M10 M12 M12 M16 M16 M20 M20 M20
      6 4 4 4 4 6 6 6
      M10 M12 M12 M16 M16 M20 M20 M20
      6 6 6 6 6 6 6 6
      M10 M12 M12 M16 M16 M20 M20 M20
      4 4 4 4 4 4 4 4
      - - 14-20 14-20 14-20 14-20 22-32 22-32
      - - 1 1 1 1 1 1
      16⊗16 18⊗18 18⊗18 24⊗24 24⊗24 30⊗30 30⊗30 30⊗30
      1 1 1 1 1 1 1 1
      - - - - - - - M 20⊗24
      - - - - - - - 8
      1 2 2 3 3 4 4 4
      4 4 4 4 4 4 4 4
      1 1 1 1 1 1 1 1
      subject to alterations
      Clamping Tool Set
      Clamping tool set
      With spring-mounted clamp holder and screw paste.
      Description as 2140.01.01 but without clamping jaws.
      Contains 4 spring-mounted clamp holders instead.
      2140.01.02. Clamping Tool Set
      Order No
      2140.01.02...
      Contents
      Universal-
      clamping units
      Size
      No.
      Step clamps
      Size
      No.
      Screws for fixing slots
      DIN 787
      (Order No. 2140.30.)
      Size
      No.
      Pin screws
      Size
      No.
      Hexagonal nuts
      1.5 d deep
      Size
      No.
      Conical sockets. similar
      to DIN
      Size
      No.
      Extension nuts 3 d deep
      Size
      No.
      T-slot scraper
      Size
      No.
      Ring/open ended
      spanners
      Size
      No.
      Nuts for fixing slots
      Size
      No.
      Clamp holders
      Size.
      No.
      Screw paste No.

      ...10.10 ...12.12 ...12.14 ...16.16 ...16.18
      M 10⊗10 M 12⊗12 M 12⊗14 M 16⊗16 M 16⊗18
      1 2 3 2 3 2 3 2 3 2 3
      4 4 2 4 4 4 4 4 4 4 4
      11⊗80 14⊗100 14⊗100 18⊗125 18⊗125
      4 4 4 4 4
      100 63 40 125 80 50 125 80 50 160 100 63 160 100 63
      4 4 2 4 4 2 4 4 2 4 4 2 4 4 2
      80 100 100 125 125
      4 4 4 4 4
      M10 M12 M12 M16 M16
      6 6 6 6 6
      M10 M12 M12 M16 M16
      6 6 6 6 6
      M10 M12 M12 M16 M16
      4 4 4 4 4
      12 12 14 16 18
      4 4 4 4 4
      - - 14-20 14-20 14-20
      - - 1 1 1
      16⊗16 18⊗18 18⊗18 24⊗24 24⊗24
      1 1 1 1 1
      1 1 1 1 1
      subject to alterations
      Clamping tool set
      Clamping tool set
      with clamping jaws and screw paste.
      The clamping tool set is designed for machine tools with bedplates that
      have fixing slots and they contain all the necessary components for fast
      clamping of tools, devices and workpieces. All parts are interchangeable
      and complementary to each other. They are made of high tensile steel to
      DIN or company standards. Bolt items strength class 8 or 10. The wooden
      box has a detachable hinged cover.
      2140.01.01. Clamping tool set
      Order No
      2140.01.01...
      Contents
      Universal-
      clamping units
      Size
      No.
      Step clamps
      Size
      No.
      Screws for fixing slots
      DIN 787
      (Order No 2140.30.)
      Size
      No.
      Pin screws
      Size
      No.
      Hexagonal nuts
      1.5 d deep
      Size
      No.
      Conical sockets,
      similar to DIN
      Size
      No.
      Extension nuts
      3.0 d deep
      Size
      No.
      Clamping jaws,
      type Bulle
      Size
      No.
      T-slot scraper
      Size
      No.
      Ring/open ended
      spanners
      Size
      No.
      Screw paste No.
      ...10.10 ...12.12 ...12.14 ...16.16 ...16.18 ...20.20 ..20.22 ...20.24
      M 10⊗10 M 12⊗12 M 12⊗14 M 16⊗16 M 16⊗18 M 20⊗20 M 20⊗22 M 20⊗24
      1 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3
      4 4 2 4 4 4 4 4 4 4 4 4 4 4 4 4 4
      11⊗80 14⊗100 14⊗100 18⊗125 18⊗125 22⊗160 22⊗160 22⊗160
      4 4 4 4 4 4 4 4
      100 63 125 80 125 80 160 100 160 100 200 125 200 125 -
      4 4 4 4 4 4 4 4 4 4 4 4 4 4 -
      80 100 100 125 125 125 125 200 125
      4 4 4 4 4 4 4 4 8
      M10 M12 M12 M16 M16 M20 M20 M20
      6 4 4 4 4 6 6 6
      M10 M12 M12 M16 M16 M20 M20 M20
      6 6 6 6 6 6 6 6
      M10 M12 M12 M16 M16 M20 M20 M20
      4 4 4 4 4 4 4 4
      - - 14-20 14-20 14-20 14-20 22-32 22-32
      - - 1 1 1 1 1 1
      16⊗16 18⊗18 18⊗18 24⊗24 24⊗24 30⊗30 30⊗30 30⊗30
      1 1 1 1 1 1 1 1
      - - - - - - - M 20⊗24
      - - - - - - - 8
      1 2 2 3 3 4 4 4
      4 4 4 4 4 4 4 4
      1 1 1 1 1 1 1 1
      subject to alterations
      Clamping Tool Set
      Clamping tool set
      With spring-mounted clamp holder and screw paste.
      Description as 2140.01.01 but without clamping jaws.
      Contains 4 spring-mounted clamp holders instead.
      2140.01.02. Clamping Tool Set
      Order No
      2140.01.02...
      Contents
      Universal-
      clamping units
      Size
      No.
      Step clamps
      Size
      No.
      Screws for fixing slots
      DIN 787
      (Order No. 2140.30.)
      Size
      No.
      Pin screws
      Size
      No.
      Hexagonal nuts
      1.5 d deep
      Size
      No.
      Conical sockets. similar
      to DIN
      Size
      No.
      Extension nuts 3 d deep
      Size
      No.
      T-slot scraper
      Size
      No.
      Ring/open ended
      spanners
      Size
      No.
      Nuts for fixing slots
      Size
      No.
      Clamp holders
      Size.
      No.
      Screw paste No.
      C69
      A
      B
      C
      D
      E
      F
      G
      H
      J
      K
      L
      Die Sets
      Precision Ground Plates and Flat Bars
      Lifting and Clamping Devices
      Guide elements
      Ground Precision Components
      Springs
      Elastomer-Bars, -Sheets, -Sections
      FIBRO Chemical Tooling Aids
      Peripheral Equipment
      Cam Units
      Standard Parts for Mould Making
      Guide elements
      Pillars, bushes, mounting flanges, ball cages, oilless guide elements
      Guide Elements
      D2 subject to alterations
      The great importance of exact alignment
      between punches and matrices in stamping
      dies has been recognized widely. The accuracy
      and maintenance of this alignment depends
      entirely on the quality and wear resistance of
      the guide elements.
      As a consequence of recent rapid developments
      in stamping techniques it has also been
      accepted that conventional bush-pillar sets of
      casehardened steel can no longer stand up to
      the demands of the modern press shop with its
      more sophisticated dies, ever faster presses and
      the stresses in today’s carbide tools.
      The introduction of FIBRO Guide Elements
      made available an extensive range, principally
      based on superlative quality, and comprising
      some new, highly advanced bearing materials
      as well as novel assembly techniques of
      superior accuracy.
      Recent additions have further broadened this
      range, especially in regard of demountable
      guiding components.
      All FIBRO Guide Bushes for permanent fixing
      are laid out for epoxy-bonding. This highly
      reliable method ensures unparalleled accuracy
      together with the elimination of shrink
      allowances and rectification honing.
      Ball Bearing Guides principally excel in
      undemanding maintenance and through the
      complete absence of bearing play. Their easy
      movement on the bench makes them very
      popular with die makers. Highest stroking
      speeds present no problems. But common to all
      ball bearings there remains the characteristic
      weakness to shock loads, the danger of ball
      impingement. To some extent this can be
      compensated for by oversized pillar diameters
      and the use of four-pillar die sets.
      The group of Sliding-Type Guides affords much
      greater stability, partly due to the damping
      effect of the all-important, vital oil film . . .
      which in the past used to be threatened always
      by the vagaries of lubrication service and the
      propensity to rupture at high frequencies of
      travel reversal.
      Extensive protection against these perils is
      offered by FIBRO Sintered Ferrite Bushes. Used
      in most of our sliding guide systems, their
      advanced technology comprises:
      – porous structure, vacuum-filled with oil
      – carbonitrided surface of extreme hardness
      – outstanding friction properties
      – exceptional wear-resistance
      – thousands of oil-retaining porosity pockets.
      In combination with our mirror-finished pillars,
      ferrite guide bushes represent a guiding system
      of alltogether superior properties. A system
      that virtually precludes seizing under all but
      the most extreme running conditions.
      Beyond such limitations there exist
      combinations of high velocities with very short
      strokes where even ferrite bushes cannot
      guarantee permanence of the oil film.
      Here, the rigidity of the sliding guide has to be
      weighed up against the safety of ball bearings:
      die set guides are not entirely without
      problems yet! But at FIBRO we find ourselves
      very busy indeed with the remainder.
      Technical progress may incur modifications
      without notice.
      FIBRO GUIDE ELEMENTS – DESIGNED
      AND PRODUCED BY PEOPLE IN PURSUIT OF
      PERFECTION.
      Guide Elements
      Guide Elements
      subject to alterations
      The great importance of exact alignment
      between punches and matrices in stamping
      dies has been recognized widely. The accuracy
      and maintenance of this alignment depends
      entirely on the quality and wear resistance of
      the guide elements.
      As a consequence of recent rapid developments
      in stamping techniques it has also been
      accepted that conventional bush-pillar sets of
      casehardened steel can no longer stand up to
      the demands of the modern press shop with its
      more sophisticated dies, ever faster presses and
      the stresses in today’s carbide tools.
      The introduction of FIBRO Guide Elements
      made available an extensive range, principally
      based on superlative quality, and comprising
      some new, highly advanced bearing materials
      as well as novel assembly techniques of
      superior accuracy.
      Recent additions have further broadened this
      range, especially in regard of demountable
      guiding components.
      All FIBRO Guide Bushes for permanent fixing
      are laid out for epoxy-bonding. This highly
      reliable method ensures unparalleled accuracy
      together with the elimination of shrink
      allowances and rectification honing.
      Ball Bearing Guides principally excel in
      undemanding maintenance and through the
      complete absence of bearing play. Their easy
      movement on the bench makes them very
      popular with die makers. Highest stroking
      speeds present no problems. But common to all
      ball bearings there remains the characteristic
      weakness to shock loads, the danger of ball
      impingement. To some extent this can be
      compensated for by oversized pillar diameters
      and the use of four-pillar die sets.
      The group of Sliding-Type Guides affords much
      greater stability, partly due to the damping
      effect of the all-important, vital oil film . . .
      which in the past used to be threatened always
      by the vagaries of lubrication service and the
      propensity to rupture at high frequencies of
      travel reversal.
      Extensive protection against these perils is
      offered by FIBRO Sintered Ferrite Bushes. Used
      in most of our sliding guide systems, their
      advanced technology comprises:
      – porous structure, vacuum-filled with oil
      – carbonitrided surface of extreme hardness
      – outstanding friction properties
      – exceptional wear-resistance
      – thousands of oil-retaining porosity pockets.
      In combination with our mirror-finished pillars,
      ferrite guide bushes represent a guiding system
      of alltogether superior properties. A system
      that virtually precludes seizing under all but
      the most extreme running conditions.
      Beyond such limitations there exist
      combinations of high velocities with very short
      strokes where even ferrite bushes cannot
      guarantee permanence of the oil film.
      Here, the rigidity of the sliding guide has to be
      weighed up against the safety of ball bearings:
      die set guides are not entirely without
      problems yet! But at FIBRO we find ourselves
      very busy indeed with the remainder.
      Technical progress may incur modifications
      without notice.
      FIBRO GUIDE ELEMENTS – DESIGNED
      AND PRODUCED BY PEOPLE IN PURSUIT OF
      PERFECTION.
      Guide Elements
      D3
      Contents
      subject to alterations
      Notes on guide elements
      Guide elements -
      Pairing classification
      Guide elements - Selection matrix
      Deflection of pillars and bending
      equation
      206.51.
      Ball cage, small dimension
      206.54.
      Guide bush for ball bearing, small
      dimension
      202.19.
      Guide pillar DIN 9825/ISO 9182-2
      202.17.
      Guide pillar with ball cage retainer
      202.22.
      Guide pillar with internal thread on
      both sides, ~DIN 9825/~ISO 9182-2
      202.23.
      Guide pillar with internal thread on
      bottom, ~DIN 9825/~ISO 9182-2
      202.24.
      Guide pillar with internal thread on
      top, ~DIN 9825/~ISO 9182-2
      202.21.
      Guide pillar endwise bolt-on type,
      ~DIN 9825/~ISO 9182-2
      202.55.
      Guide pillar endwise bolt-on type
      with ball cage, ~DIN 9825/
      ~ISO 9182-2
      202.29.
      Guide pillar "ECO-Line", ~DIN 9825/
      ~ISO 9182-2
      202.31.
      Guide pillar "ECO-Line" endwise
      bolt-on type, ~DIN 9825/
      ~ISO 9182-2
      2021.50.
      Guide pillar, conical, DIN 9825/
      ISO 9182-4/AFNOR
      D4
      D21
      D22-23
      D24
      D25
      D26
      D26
      D27
      D28
      D29
      D30
      D31
      D32
      D34
      D36
      D38
      D40
      Contents
      subject to alterations
      2021.58.
      Demountable guide pillar, conical,
      with ball cage retainer, DIN 9825/
      ISO 9182-4/AFNOR
      2021.53.
      Retaining disc with countersunk
      head cap screw, DIN 9825/
      ISO 9182- 4
      202.53.
      Retaining disc with socket cap screw,
      ~ AFNOR
      2021.39.
      Retaining bush for guide pillar
      conical 2021.50., DIN 9825/
      ISO 9182- 4
      210.39.
      Retaining bush for guide pillar
      conical 2021.50.,~ AFNOR
      2022.19.
      Guide pillar for large tools,
      DIN 9833/ISO 9182-3
      2022.13.
      Guide pillar with 5° pilot taper,
      to VW-Standard
      2022.15.
      Guide pillar with pilot tapper,
      VDI 3356
      2022.17.
      Guide pillar with groove, to VW
      2022.40.1.
      Locating plate for guide pillar, to VW
      2022.25.
      Guide pillar with retaining ring
      groove, ~AFNOR
      2073.46.
      Clamping flange with retaining ring,
      ~AFNOR
      2022.16.
      Guide pillar with snap ring groove,
      to Mercedes-Benz Standard
      2022.12.
      Guide pillar with pilot tapper and
      groove, to Mercedes-Benz Standard
      2061.48.
      Snap ring
      2022.16.45.
      Guide pillar with groove, to CNOMO
      D5
      D42
      D44
      D44
      D45
      D46
      D47
      D48
      D49
      D50
      D51
      D52
      D53
      D54
      D56
      D57
      D58
      Contents
      subject to alterations
      2022.16.48.
      Guide pillar with groove
      2022.29.
      Guide pillar with collar, to WDX
      2021.46.
      Guide pillar with collar, screw clamp
      retention, DIN 9825/~ISO 9182-5
      2021.44.
      Guide pillar with collar and ball cage
      retainer
      2021.43.
      Retaining disc with screw
      2025.94.
      Ball guide unit to Mercedes-Benz
      Standard
      2021.29.
      Guide pillar with collar "ECO-LINE"
      202.61.
      Guide pillar with collar
      2062.44.012.
      Guide bush for ball bearing, for
      highest stroking speed
      2061.44.
      Guide bush for ball bearing,
      ISO 9448-3
      206.41.
      Ball cage, plastic, for highest
      stroking speed
      2020.63.
      Demountable guide pillar with
      centre fixing
      2020.62.
      Demountable guide pillar with
      centre fixing
      202.60
      Demountable guide pillar with
      centre fixing and ring nut
      2020.64.
      Demountable guide pillar with
      conical centre fixing
      2021.64.
      Retaining bush for guide pillar
      conical 2020.64.
      D6
      D59
      D60
      D62
      D64
      D66
      D67
      D68
      D69
      D70
      D70-99
      D71
      D72
      D74
      D76
      D77
      D78
      Contents
      subject to alterations
      2073.48.
      Slotted nut DIN 1804
      2024.94.
      Guide unit with collar
      MILLION GUIDE
      2024.96.
      Guide unit with center fixing
      MILLION GUIDE
      2031.70.
      Guide bearing with solid lubricant
      2031.01.
      Retention bearing
      2031.31.
      Guide bearing, sintered guide
      2031.41.
      Guide bearing for ball bearing guide
      2031.02.
      Retention bearing with screw holes
      2031.34.
      Guide bearing with screw holes,
      sintered guide
      2031.42.
      Guide bearing with screw holes, for
      ball bearing guide
      2031.04.
      Retention bearing, low build height
      2031.38.
      Guide bearing, low build height,
      sintered guide
      2031.44.
      Guide bearing low build height, for
      ball bearing guide
      2032.70.
      Guide bearing with headed guide
      bush with solid lubricant
      2032.02.
      Retention bearing for guide pillars
      for large tools
      2051.32.
      Guide bush, sintered ferrite carbo-
      nitrided with long-term lubrication,
      ISO 9448-2
      D7
      D79
      D80
      D82
      D84
      D85
      D86
      D87
      D88
      D89
      D90
      D91
      D92
      D93
      D94
      D95
      D96
      Contents
      subject to alterations
      2051.92.
      Guide bush "ECO-LINE", bronze-
      plated, ISO 9448-2
      2051.72.
      Guide bush "ECO-LINE", Bronze with
      solid lubrication rings, ISO 9448-2
      206.49.
      Guide bush for ball bearing, AFNOR
      2061.47.
      Guide bush for ball bearing, with
      stroke limitation
      206.71.
      Ball cage with circlip groove, Brass
      2060.61.
      Ball cage with circlip groove,
      Aluminium
      206.73.
      Ball cage with assembly aid, Brass
      2060.63.
      Ball cage with assembly aid,
      Aluminium
      206.75.
      Ball cage with circlip and fastening
      ring groove, Brass
      2060.65.
      Ball cage with circlip and fastening
      ring groove, Aluminium
      2081.67.
      Headed guide bush with ball cage
      retainer
      2081.68.
      Headed guide bush with ball cage
      retainer
      2091.67.
      Flanged guide bush with ball cage
      retainer
      2091.68.
      Flanged guide bush with ball cage
      retainer
      2061.82.
      Roller cage with circlip groove, Brass
      206.72.
      Circlip DIN 471
      D8
      D97
      D98
      D100
      D101
      D102
      D103
      D104
      D105
      D106
      D107
      D108
      D109
      D110
      D111
      D112
      D113
      Contents
      subject to alterations
      2061.84.
      Roller cage with assembly aid, Brass
      2081.81.
      Headed guide bush, bronze coated,
      ISO 9448-6
      2081.84.
      Headed guide bush, bronze coated,
      ISO 9448-6
      2081.85.
      Headed guide bush, bronze coated,
      ISO 9448-6
      2081.31.
      Headed guide bush, sintered ferrite
      carbonitrided with long-term lubri-
      cation, ISO 9448-6
      2081.32.
      Headed guide bush, sintered ferrite
      carbonitrided with long-term lubri-
      cation, ISO 9448-6
      2081.33.
      Headed guide bush, sintered ferrite
      carbonitrided with long-term lubri-
      cation, ISO 9448-6
      2081.34.
      Headed guide bush, sintered ferrite
      carbonitrided with long-term lubri-
      cation, ISO 9448-6
      2081.35.
      Headed guide bush, sintered ferrite
      carbonitrided with long-term lubri-
      cation, ISO 9448-6
      2081.91.
      Headed guide bush "ECO-LINE",
      bronzeplated, ISO 9448-6
      2081.94.
      Headed guide bush "ECO-LINE",
      bronzeplated, ISO 9448-6
      2081.95.
      Headed guide bush "ECO-LINE",
      bronzeplated, ISO 9448-6
      2081.71.
      Headed guide bush "ECO-LINE",
      Bronze with solid lubricant rings,
      ISO 9448-6
      2081.74.
      Headed guide bush "ECO-LINE",
      Bronze with solid lubricant rings,
      ISO 9448-6
      2081.75.
      Headed guide bush "ECO-LINE",
      Bronze with solid lubricant rings,
      ISO 9448-6
      2081.44.
      Headed guide bush for ball bearing,
      ISO 9448-7
      D9
      D114
      D115
      D116
      D117
      D118
      D119
      D120
      D121
      D122
      D123
      D124
      D125
      D126
      D127
      D128
      D129
      Contents
      subject to alterations
      2081.45.
      Headed guide bush for ball bearing,
      ISO 9448-7
      2081.46.
      Headed guide bush for ball bearing,
      ISO 9448-7
      2081.47.
      Headed guide bush for ball bearing,
      ISO 9448-7
      2081.49.
      Headed guide bush for ball bearing,
      ISO 9448-7
      2091.31.
      Flanged guide bush, sintered ferrite
      carbonitrided with long-term lubri-
      cation, ISO 9448-4
      2091.32.
      Flanged guide bush, sintered ferrite
      carbonitrided with long-term lubri-
      cation, ISO 9448-4
      2091.34.
      Flanged guide bush, sintered ferrite
      carbonitrided with long-term lubri-
      cation, ISO 9448-4
      2091.91.
      Flanged guide bush "ECO-LINE",
      bronzeplated, ISO 9448-4
      2091.92.
      Flanged guide bush "ECO-LINE",
      bronzeplated, ISO 9448-4
      2091.94.
      Flanged guide bush "ECO-LINE",
      bronzeplated, ISO 9448-4
      2091.71.
      Flanged guide bush "ECO-LINE",
      Bronze with solid lubricant rings,
      ISO 9448-4
      2091.72.
      Flanged guide bush "ECO-LINE",
      Bronze with solid lubricant rings,
      ISO 9448-4
      2091.74.
      Flanged guide bush "ECO-LINE",
      Bronze with solid lubricant rings,
      ISO 9448-4
      2091.44.
      Flanged guide bush for ball bearing,
      ISO 9448-5
      2091.45.
      Flanged guide bush for ball bearing,
      ISO 9448-5
      2091.46.
      Flanged guide bush for ball bearing,
      ISO 9448-5
      D10
      D130
      D131
      D132
      D133
      D134
      D135
      D136
      D137
      D138
      D139
      D140
      D141
      D142
      D143
      D144
      D145
      Contents
      subject to alterations
      210.31.
      Headed guide bush, sintered ferrite
      carbonitrided with long-term lubri-
      cation, ~AFNOR
      210.34.
      Headed guide bush, sintered ferrite
      carbonitrided with long-term lubri-
      cation, ~AFNOR
      210.35.
      Headed guide bush, sintered ferrite
      carbonitrided with long-term lubri-
      cation, ~AFNOR
      210.44.
      Headed guide bush for ball bearing,
      ~AFNOR
      210.46.
      Headed guide bush for ball bearing,
      ~AFNOR
      210.45.
      Guide bush with collar, for ball
      bearing, ~AFNOR
      210.85.
      Guide bush with collar, bronze
      coated, ~AFNOR
      207.48.
      Slotted nut
      Oilless guide elements
      2053.70.
      Thrust washer, Bronze with solid
      lubricant
      2052.70.
      Guide bush, Bronze with solid
      lubricant
      2085.70.
      Guide bush with collar, Bronze with
      solid lubricant
      2085.71.
      Guide bush with collar, Bronze with
      solid lubricant
      2086.70.
      Guide bush with collar, Bronze with
      solid lubricant
      2085.72.
      Guide bush with collar, Bronze with
      solid lubricant
      2082.70.
      Guide bush with collar, Bronze with
      solid lubricant, DIN 9834/ISO 9448
      D11
      D146
      D147
      D148
      D150
      D152
      D154
      D155
      D156
      D157-
      158
      D159
      D160-
      161
      D162
      D163
      D164
      D165
      D166
      Contents
      subject to alterations
      2082.71.
      Guide bush with collar, Bronze with
      solid lubricant, NAAMS
      2086.71.
      Guide bush with collar, Bronze with
      solid lubricant, NAAMS
      2102.70.
      Guide bush with collar, Bronze with
      solid lubricant, CNOMO
      2102.71.
      Guide bush with collar, Bronze,
      CNOMO
      2961.71.
      Flat guide bar, Bronze with solid
      lubricant
      2961.76.
      Flat guide bar, Bronze with solid
      lubricant
      2961.77.
      Flat guide bar, Bronze with solid
      lubricant
      2961.73.
      Flat guide bar with two sliding
      surfaces, Bronze with solid lubricant
      2961.70.
      Flat guide bar, Bronze with solid
      lubricant
      2961.75.
      Flat guide bar, Bronze with solid
      lubricant
      2961.74.
      Retaining plate, Bronze with solid
      lubricant, VDI 3357
      2961.79.
      Retaining plate, Steel, VDI 3357
      2961.81.
      Retaining plate, Steel with solid
      lubricant, VDI 3357
      2961.78.
      Retaining plate, Bronze with solid
      lubricant
      2961.82.
      Retaining plate, Steel with solid
      lubricant, NAAMS
      2961.79.45.
      Retaining plate, Steel, CNOMO
      D12
      D167
      D168
      D169
      D170
      D171
      D172
      D173
      D174
      D175
      D176
      D177
      D178
      D179
      D180
      D181
      D182
      Contents
      subject to alterations
      2961.81.45.
      Retaining plate, Bronze with solid
      lubricant, CNOMO
      2960.72.
      Sliding pad, small dimension, Bronze
      with solid lubricant
      2960.71.
      Sliding pad, Bronze with solid lubri-
      cant, VDI 3357
      2960.87.
      Sliding pad, Steel, VDI 3357
      2960.30.
      Sliding pad, Steel with sinterlayer,
      VDI 3357
      2960.70.
      Sliding pad, Bronze with solid lubri-
      cant, ISO 9183-1
      2960.85.
      Sliding pad, Bronze with solid
      lubricant
      2960.86.
      Sliding pad, Bronze with solid
      lubricant
      2960.76.
      Sliding pad, Bronze with solid
      lubricant
      2962.78.45.
      Sliding pad, Bronze with solid lubri-
      cant, CNOMO
      2962.78.
      Sliding pad, Bronze with solid
      lubricant
      2962.84.45.
      Sliding pad, Steel, CNOMO
      2962.85.
      Sliding pad, Steel with solid
      lubricant
      2960.79.
      Sliding pad, Bronze with solid lubri-
      cant, NAAMS
      2960.80.
      Sliding pad, Steel, NAAMS
      2960.74.
      Sliding pad, Bronze with solid lubri-
      cant, AFNOR/ISO 9183-2
      D13
      D183
      D184
      D186
      D188
      D190
      D192
      D194
      D195
      D196
      D197
      D198
      D200
      D201
      D202
      D203
      D204
      Contents
      subject to alterations
      2960.75.
      Sliding pad, Special cast iron (GG25)
      with solid lubricant, AFNOR/
      ISO 9183-2
      2960.44.45.
      Sliding pad, Steel with oil groove,
      CNOMO
      2960.54.45.
      Sliding pad, Bronze with oil groove,
      CNOMO
      2960.81.
      Sliding pad, Bronze with solid lubri-
      cant, VDI 3357
      2960.88.
      Sliding pad, Steel, VDI 3357
      2960.93.
      Sliding pad, Bronze with solid lubri-
      cant, VDI 3357
      2962.75.
      Guide bar with two sliding surfaces,
      Bronze with solid lubricant,
      VDI 3357
      2962.75.45.
      Guide bar with two sliding surfaces,
      Bronze with solid lubricant, CNOMO
      2962.76.
      Guide bar with three sliding
      surfaces, Bronze with solid lubricant
      2962.77.
      Guide bar with two sliding surfaces,
      Bronze with solid lubricant
      2962.74.
      Guide bar with four sliding surfaces,
      Bronze with solid lubricant
      2962.79.
      Guide bar with one sliding surfaces,
      Bronze with solid lubricant
      2962.80.
      Guide bar with three sliding
      surfaces, Bronze with solid lubricant
      2960.73.
      Guide bracket, Steel with solid lubri-
      cant, VDI 3387
      2960.89.
      Guide bracket, Bronze with solid
      lubricant, VDI 3387
      2966.72.
      Slide centre guide, Bronze with solid
      lubricant
      D14
      D206
      D208
      D210
      D211
      D212
      D214
      D215
      D216
      D217
      D218
      D219
      D220
      D221
      D222
      D223
      D224
      Contents
      subject to alterations
      2960.90.
      Overrun Cam, Steel hardened,
      VDI 3357
      2960.91.
      Overrun Cam, Steel hardened and
      gas nitrided, VDI 3357
      2960.92.
      Overrun Cam, Bronze with solid
      lubricant, VDI 3357
      2962.70.
      Angled guide gib, Bronze with solid
      lubricant
      2962.70.45.
      Angled guide gib, Bronze with solid
      lubricant, CNOMO
      2962.71.
      Angled guide gib, Bronze with solid
      lubricant
      2962.72.
      Angled guide gib, Bronze with solid
      lubricant
      2962.73.
      Angled guide gib, Bronze with solid
      lubricant
      2962.81.
      Angled guide gib, Bronze with solid
      lubricant
      2962.82.
      Angled guide gib, Bronze with solid
      lubricant
      2962.83.
      Angled guide gib, Bronze with solid
      lubricant
      2964.77.
      T-Guide bar, Bronze with solid
      lubricant
      2964.78.
      T-Guide bar, Bronze with solid
      lubricant
      2963.82.
      Sliding block, Bronze with solid lubri-
      cant, NAAMS
      2963.83.
      Prismatic guide, Steel, NAAMS
      2963.84.
      Sliding block, Bronze with solid lubri-
      cant, VDI 3357
      D15
      D225
      D226
      D227
      D228
      D229
      D230
      D231
      D232
      D233
      D234
      D235
      D236
      D236
      D237
      D237
      D238
      Contents
      subject to alterations
      2963.85.
      Prismatic guide, Steel, VDI 3357
      2963.70.
      Prismatic guide, Bronze with solid
      lubricant
      2963.71.
      Sliding block, Steel
      2963.72.
      Prismatic guide, Bronze with solid
      lubricant
      2963.73.
      Sliding block, Steel
      2963.81.
      Prismatic guide, Steel
      2963.80.
      Sliding block, Bronze with solid
      lubricant
      2965.81.
      Single-sided prismatic guide, Bronze
      with solid lubricant
      2965.83.
      Single-sided prismatic sliding block,
      Steel
      2965.80.45.
      Single-sided prismatic guide, Bronze
      with solid lubricant, CNOMO
      2965.82.45.
      Single-sided prismatic sliding block,
      Steel, CNOMO
      2965.80.
      Single-sided prismatic guide, Bronze
      with solid lubricant
      2965.82.
      Single-sided prismatic sliding block,
      Steel
      Oilless guide elements - Mounting
      examples
      2441.11.0.
      Centering unit with adjusting
      washer
      2441.11.
      Centering unit
      D16
      D238
      D239
      D239
      D240
      D240
      D242
      D243
      D244
      D245
      D246
      D247
      D248
      D249
      D250-
      253
      D254
      D255
      Contents
      subject to alterations
      2441.11.3.
      Adjusting washer
      2441.13.45.
      Centring unit, CNOMO
      2441.13.3.45.
      Adjusting washer, CNOMO
      2441.13.
      Centring unit, CNOMO
      2441.13.3.
      Adjusting washer, CNOMO
      2445.10.
      Centring pin
      2445.11.
      Centring pin to Mercedes-Benz
      standard
      2446.10.55.
      Pressure bolt with base, according
      to VW
      2446.11.55.
      Air pin, according to VW standard
      206.91.
      Concertina shroud with spacer bush
      206.93.
      Spacer bush
      206.94.
      Spacer tube
      206.92.
      Concertina shroud with spacer tube
      241.18.
      Helical spring for ball cage retention
      202.91.
      Cage retainer
      202.92.1.
      Cage retainer
      D17
      D256
      D257
      D258
      D259
      D260
      D261
      D262
      D263
      D264
      D265
      D266
      D266
      D267
      D268
      D269
      D270
      Contents
      subject to alterations
      202.93.
      Cage retainer
      206.95./2061.95.
      Pillar wiper
      244.00.2.
      Lifter pin for press tool strips
      207.45
      Screw clamp with screw
      2071.45
      Screw clamp with screw
      2072.45.
      Screw clamp with screw
      2072.46
      Screw clamp with screw
      2072.46.30.
      Screw clamp with screw,
      GM Standard
      2072.47
      Screw clamp with screw, NAAMS
      2073.45.
      Securing flange with screws,
      CNOMO
      2072.48.45.
      Screw clamp with screw, CNOMO
      2444.12 / 2444.13
      Spacer plate toothed, with adjusting
      plate
      2443.10.
      Guide
      2443.10.20.
      Guide to Mercedes-Benz Standard -
      unhardened
      2443.10.20. .1
      Guide to Mercedes-Benz Standard -
      hardened
      2443.12.
      Guide with part position control and
      spring
      D18
      D271
      D272
      D273
      D274
      D274
      D274
      D275
      D275
      D275
      D276
      D276
      D278
      D279
      D280
      D281
      D282
      Contents
      subject to alterations
      2443.13.
      Guide with part position control, VDI
      2018.00.60.08.030
      Inductive proximity switch
      2018.00.60.23.01.5
      Cable - straight
      2018.00.60.23.02.5
      Cable , 90° connector
      2443.14.55.
      Position monitor for boards
      2443.14.00.60.18.044
      Inductive proximity switch
      2443.14.00.60.23.01.5
      Cable - straight
      2443.14.00.60.23.02.5
      Cable , 90° connector
      Ball bearing guides - Loading
      Diagram
      Ball bearing guides - Tables of
      dynamic load indexes
      Guide elements - Mounting guide-
      lines, Dimension tables
      D19
      D283
      D284
      D285
      D285
      D287
      D288
      D289
      D289
      D290
      D291
      D292-
      298
      subject to alterations D20
      subject to alterations
      Notes on Guide Elements
      FIBRO Precision Sliding Guides –
      Carbonitrided Sintered Ferrite Bushes
      These guides employ bushes made from sintered ferrite of high purity with carbonitrided surface. Bearing
      surfaces are fine-ground.
      The sintered ferrite has a porosity content of 18-20 % by volume, vacuum filled with special lubricant FIBROLIT
      LD. As additional long term lubrication it is recommended to fill up the grove in the bushing with FIBROLIT LD
      280.34, see chapter H. Even under arduous running conditions, this material can be relied upon for good protec-
      tion against oil film rupture.
      Under no circumstances must molybdenum disulfite be added to the lubricant.
      For bearing clearance ranges, see chapter D.
      FIBRO High Precision Ball Bearing Guides
      Careful manufacture at narrowest tolerances, and exactly the right amount of preloading* result in a play-free
      guide element of exceptional performance potential.
      Our superfinished running surfaces further enhance the advantages of ball bearing guides.
      Toolmakers favour ball bearing buides because of their free movement on the bench.
      FIBRO ball bearing guides can be equipped with a choice of brass or aluminium ball cages, which have proved to
      be very successful in practice due to their ball density and stability
      Ball bearing guides with their point contact of the balls remain somewhat sensitive to shock and sustained
      radial loads. To some extent, generous dimensioning of pillar diameters helps to compensate for this inherent
      disadvantage.
      * Average preloading:
      4 µm on pillars from 8 to 12 mm diameter
      7– 9 µm on pillars from 15 to 16 mm diameter
      9–11 µm on pillars from 18 to 42 mm diameter
      11–13 µm on pillars from 50 to 80 mm diameter
      FIBRO Precision Roller Guides
      The profile roller cages are in linear contact with the guide bushing and guide pillar. This feature offers much
      greater capacity for radial loads in the individual roller than an identical size of ball bearing.
      The caulking of the roller bearing arrangement is implemented with the same FIBRO-specific solution as that
      used in ball cages.
      The profile rollers are arranged in a spiral formation in an axial direction. This gives each profile roller its own
      path. The roller cages are designed with a recess for a circlip conforming to DIN 471.
      The much larger contact area with the ball bearing guide permits a significant reduction in preload values.
      The following preload values apply to FIBRO Roller Guides:
      For static loads/low velocities,
      pillar diameters
      For dynamic loads/High
      velocities, pillar diameters
      up to Ø 25 = 2,5 µm up to Ø 25 = 1,5 µm
      Ø 30/32 = 3,5 µm Ø 30/32 = 2,5 µm
      Ø 40-50 = 3,5 µm Ø 40-50 = 2,5 µm
      Ø 63 = 4 µm Ø 63 = 3 µm
      FIBRO Precision Sliding Guides, bronze-coated
      consists of a steel body with bronze-coated running surface with helical oil groove and a grease nipple for
      lubrication.
      The steel body guarantees excellent resistance to breaking, even when subject to high loading
      at the edges.
      Use only pairing class
      guide pillar red = .30
      guide bush yellow = .10
      FIBRO Sliding Bearings with Non-Liquid Lubricant
      The pockets containing the non-liquid lubricant occupy some 25 to 30 per cent of the bearing surface consisting
      of a bronze matrix.
      After an initial oil lubrication on assembly, these elements are maintenance-free.
      Wherever there is a demand for non-susceptibility against impact, contamination and heat,
      FIBRO Maintenance-Free Bearings find their ideal application.
      We recommend to apply the tolerance classes H7/f6 to bush/pillar combinations using these elements.
      D21
      subject to alterations
      Pairing Classification
      Guide Pillars with sliding sintered Bushes
      Guide Pillars with Ball Bearing Bushes
      Cutting clearance Sliding guide
      bearing clearance
      Ball bearing
      preloading
      small small large Piece parts with small tolerances, closely specified cut edge proper-
      ties and contours – also parts from thin material
      Pairing 1
      medium medium medium Piece parts from sheet thicker than 1 mm – also preferably for pro-
      gression dies
      Pairing 2
      large large small Where demands on edges and burrs are not stringent; note that
      large die clearances require smaller shearing forces
      Pairing 3
      Selection of punch-matrix clearance is largely determind by piece part charcteristics such as percentage of sheared land versus breakaway,
      but also by demands on burr formation.
      Further criteria are: properties of piece part materials, conditions of the tool as well as the condition of the eccentric press.
      Colour coding by painted dots Sliding guide Ball bearing
      Pillar Bush Pillar Bush
      Colour Order No Colour Order No Colour Order No Colour Order No
      Pairing 1 yellow .10 yellow .10 yellow .10 red .30
      green .20 yellow .10 yellow .10 green .20
      green .20 red .30
      Pairing 2 green .20 green .20 yellow .10 yellow .10
      red .30 yellow .10 green .20 green .20
      yellow .10 green .20 red .30 red .30
      Pairing 3 red .30 red .30 green .20 yellow .10
      green .20 red .30 red .30 green .20
      yellow .10 red .30 red .30 yellow .10
      Selection Criteria:
      die clearance – stock thickness – material
      Note:
      Please note that tight bearing clearances are normally unsuitable for 4-pillar die sets. In general, wherever retainer bore geometry is not absolutely perfect,
      pairings 2 and 3 must be chosen. The pairing classification does not signify differences in quality, rather a selection of the necessary bearing clearance in the
      case of guide pillars or preloading in the case of ball bearings (see also chart next page).
      Ordering Code (example):
      Guide Pillar, tolerance range 1, yellow = 202.19.040.260.10 or green is then .20
      Sliding guide, tolerance range 1, yellow = 2081.31.040.10
      D22
      30
      29
      28
      27
      26
      25
      24
      23
      22
      21
      20
      19
      18
      17
      16
      15
      14
      13
      12
      11
      10
      9
      8
      7
      6
      5
      4
      3
      2
      +1
      0
      –1
      2
      3
      4
      5
      6
      7
      8
      9
      10
      11
      12
      13
      14
      15
      16
      17
      18
      19
      20
      21
      22
      23
      24
      25
      30
      29
      28
      27
      26
      25
      24
      23
      22
      21
      20
      19
      18
      17
      16
      15
      14
      13
      12
      11
      10
      9
      8
      7
      6
      5
      4
      3
      2
      +1
      0
      –1
      2
      3
      4
      5
      6
      7
      8
      9
      10
      11
      12
      13
      14
      15
      16
      17
      18
      19
      20
      21
      22
      23
      24
      25
      [ 48/50
      [ 60/63 [ 80
      [ 80
      [ 60/63 [ 48/50
      [ 38/40 [ 30/32 [ 24/25
      [ 19/20 [ 15/16
      [ 8/11/12
      [ 15/16 [ 19/20
      [ 24/25 [ 30/32
      [ 38/40
      [ 48/50 [ 60/63 [ 80
      [ 15/16
      [ 19/20
      [ 24/25
      [ 30/32
      [ 38/40
      ← µm ? µm →
      [ 8/11/12
      subject to alterations
      Pairing Classification
      Guide Pillars with sliding sintered Bushes
      Guide Pillars with Ball Bearing Bushes
      Guide Bush
      Ball Bearing Guide
      Guide Bush
      Sliding Guide
      Guide Pillar
      Tolerance range is Order No.
      yellow .10
      green .20
      red .30
      subject to alterations
      Pairing Classification
      Guide Pillars with sliding sintered Bushes
      Guide Pillars with Ball Bearing Bushes
      Cutting clearance Sliding guide
      bearing clearance
      Ball bearing
      preloading
      small small large Piece parts with small tolerances, closely specified cut edge proper-
      ties and contours – also parts from thin material
      Pairing 1
      medium medium medium Piece parts from sheet thicker than 1 mm – also preferably for pro-
      gression dies
      Pairing 2
      large large small Where demands on edges and burrs are not stringent; note that
      large die clearances require smaller shearing forces
      Pairing 3
      Selection of punch-matrix clearance is largely determind by piece part charcteristics such as percentage of sheared land versus breakaway,
      but also by demands on burr formation.
      Further criteria are: properties of piece part materials, conditions of the tool as well as the condition of the eccentric press.
      Colour coding by painted dots Sliding guide Ball bearing
      Pillar Bush Pillar Bush
      Colour Order No Colour Order No Colour Order No Colour Order No
      Pairing 1 yellow .10 yellow .10 yellow .10 red .30
      green .20 yellow .10 yellow .10 green .20
      green .20 red .30
      Pairing 2 green .20 green .20 yellow .10 yellow .10
      red .30 yellow .10 green .20 green .20
      yellow .10 green .20 red .30 red .30
      Pairing 3 red .30 red .30 green .20 yellow .10
      green .20 red .30 red .30 green .20
      yellow .10 red .30 red .30 yellow .10
      Selection Criteria:
      die clearance – stock thickness – material
      Note:
      Please note that tight bearing clearances are normally unsuitable for 4-pillar die sets. In general, wherever retainer bore geometry is not absolutely perfect,
      pairings 2 and 3 must be chosen. The pairing classification does not signify differences in quality, rather a selection of the necessary bearing clearance in the
      case of guide pillars or preloading in the case of ball bearings (see also chart next page).
      Ordering Code (example):
      Guide Pillar, tolerance range 1, yellow = 202.19.040.260.10 or green is then .20
      Sliding guide, tolerance range 1, yellow = 2081.31.040.10
      30
      29
      28
      27
      26
      25
      24
      23
      22
      21
      20
      19
      18
      17
      16
      15
      14
      13
      12
      11
      10
      9
      8
      7
      6
      5
      4
      3
      2
      +1
      0
      –1
      2
      3
      4
      5
      6
      7
      8
      9
      10
      11
      12
      13
      14
      15
      16
      17
      18
      19
      20
      21
      22
      23
      24
      25
      30
      29
      28
      27
      26
      25
      24
      23
      22
      21
      20
      19
      18
      17
      16
      15
      14
      13
      12
      11
      10
      9
      8
      7
      6
      5
      4
      3
      2
      +1
      0
      –1
      2
      3
      4
      5
      6
      7
      8
      9
      10
      11
      12
      13
      14
      15
      16
      17
      18
      19
      20
      21
      22
      23
      24
      25
      [ 48/50
      [ 60/63 [ 80
      [ 80
      [ 60/63 [ 48/50
      [ 38/40 [ 30/32 [ 24/25
      [ 19/20 [ 15/16
      [ 8/11/12
      [ 15/16 [ 19/20
      [ 24/25 [ 30/32
      [ 38/40
      [ 48/50 [ 60/63 [ 80
      [ 15/16
      [ 19/20
      [ 24/25
      [ 30/32
      [ 38/40
      ← µm ? µm →
      [ 8/11/12
      subject to alterations
      Pairing Classification
      Guide Pillars with sliding sintered Bushes
      Guide Pillars with Ball Bearing Bushes
      Guide Bush
      Ball Bearing Guide
      Guide Bush
      Sliding Guide
      Guide Pillar
      Tolerance range is Order No.
      yellow .10
      green .20
      red .30
      D23
      202.17. 202.55.
      202.19. 210.39.
      202.21. 2021.44.
      202.22. 2021.46.
      202.23. 2021.50.
      202.24. 2021.58.
      202.61. 2020.64.
      2020.63.
      202.60. 2020.62.
      2022.25.
      2022.16.45.
      2022.16.48.
      2021.28. 2022.17.
      2022.12. 2022.19.
      2022.13. 2022.29.
      2022.15.
      2022.16.
      202.29. 2021.29.
      202.31.
      .30 .20 .10 h3 .30 .20 .10 h5
      -0.010
      -0.025
      f6 h4
      206.49. 2081.46.
      210.44. 2081.47.
      210.45. 2081.49.
      210.46. 2081.67.
      2031.41. 2081.68.
      2031.42. 2091.44.
      2031.44. 2091.45.
      2061.44. 2091.46.
      2061.47. 2091.67.
      2081.44. 2091.68.
      2081.45.
      .10 ● 1 ● 1 ● 1 ● 1 ● 1 ● 1 ● 1 ? ? ? ● 1
      .20 ● 1 ● 1 ● 1 ● 1 ● 1 ● 1 ● 1 ? ? ? ?
      .30 ● 1 ● 1 ● 1 ● 1 ● 1 ● 1 ● 1 ? ? ? ?
      210.31. 2081.32.
      210.34. 2081.33.
      210.35. 2081.34.
      2031.31. 2081.35.
      2031.34. 2091.31.
      2031.38. 2091.32.
      2051.32. 2091.34.
      2081.31.
      .10 ● 1 ● 1 ● 1 ? ● 1 ● 1 ● 1 ? ? ? ●
      .20 ● 1 ● 1 ● 1 ? ● 1 ● 1 ● 1 ? ? ? ●
      .30 ● 1 ● 1 ● 1 ? ● 1 ● 1 ● 1 ? ? ? ●
      2051.72. 2091.71.
      2081.71. 2091.72.
      2081.74. 2091.74.
      2081.75.
      H6 ● ○ ? ? ? ? ? ? ? ? ●
      210.85. 2081.85.
      2081.81.
      2081.84.
      ITS ● ● ○ ? ? ? ? ? ? ? ●
      2051.92. 2091.91.
      2081.91. 2091.92.
      2081.94. 2091.94.
      2081.95.
      H5 ● ○ ? ? ? ? ? ? ? ? ●
      2031.70. 2087.70.
      2082.70. 2087.71.
      2082.71. 2087.72.
      2085.70. 2082.73.
      2085.72.
      H7 ● ? ? ? ? ? ? ● ● ● ●
      2085.71. E7 ● ● ● ? ? ? ? ● ● ● ●
      2032.70. 2086.70.
      2052.70.
      F7 ● ● ? ? ? ? ? ● ● ● ●
      2102.70. 2102.71. G7 ● ● ? ? ? ? ? ● ● ● ●
      2086.71. C9 ● ● ● ? ? ? ? ● ● ● ●
      subject to alterations
      Selection matrix
      Guide Pillars - Guide Bushes
      ● = suitable
      ● 1 = suitable (see pairing classification at the beginning of chapter D)
      £ = conditionally suitable
      Ñ = not suitable
      The combinations should be considered as recommendations. Depending on the installation situation and type of use, a previous examination or test is
      mandatory, since different combinations may result in varying clearance (slide guide) or pretension (ball guides) values.
      Guide Pillars
      Guide pillars to DIN 9825
      Guide pillars, bolt-on type
      Demountable guide pillars
      Guide pillars
      with centre fixing
      Guide pillars
      with centre fixing
      Guide pillars to AFNOR
      Guide pillars
      Guide pillars for large tools
      Guide pillars ECO-LINE
      Guide Bushes
      Tolerance
      range
      Ball bearing guide bushes
      Mounting flanges with
      ball bearing guide bushes
      Guide bushes, sintered ferrite
      Mounting flanges with
      guide bushes, sintered ferrite
      Guide bushes ECO-LINE bronze
      with solid lubrication rings
      Guide bushes
      bronze coated
      Guide bushes ECO-LINE
      bronzeplated
      Guide bushes with solid
      lubrication
      Mounting flanges with Guide
      bushes with solid lubrication
      Guide bushes with solid
      lubrication
      Guide bushes with solid
      lubrication
      Guide bushes with solid
      lubrication
      Guide bushes with solid
      lubrication
      03.2017
      202.17. 2021.50.
      202.19. 2021.58.
      202.21. 210.39.
      202.22. 2021.44.
      202.23. 2021.46.
      202.24. 202.55.
      2020.63. 2020.64.
      2020.62. 202.60.
      2022.25.
      2022.16.45.
      2022.12. 2022.13.
      2022.15.
      2022.16. 2022.17.
      2022.19.
      2022.29.
      2021.29. 202.29.
      202.31.
      .30 .20 .10 h3 .30 .20 .10 h5
      -0.010
      -0.025
      f6 h4
      2061.44. 2081.44.
      206.49. 2081.45.
      2061.47. 2081.46.
      2081.67. 2081.47.
      2091.67. 2081.49.
      2091.44. 210.44.
      2091.45. 210.45.
      2091.46. 210.46.
      2031.41. 2031.42.
      2031.44.
      .10 ● 1 ● 1 ● 1 ● 1 ● 1 ● 1 ● 1 ? ? ? ?
      .20 ● 1 ● 1 ● 1 ● 1 ● 1 ● 1 ● 1 ? ? ? ?
      .30 ● 1 ● 1 ● 1 ● 1 ● 1 ● 1 ● 1 ? ? ? ?
      2031.31. 2081.31.
      2031.34. 2081.32.
      2031.38. 2081.33.
      2051.32. 2081.34.
      2091.31. 2081.35.
      2091.32. 210.31.
      2091.34. 210.34.
       210.35.
      .10 ● 1 ● 1 ● 1 ? ? ? ? ? ? ? ●
      .20 ● 1 ● 1 ● 1 ? ? ? ? ? ? ? ●
      .30 ● 1 ● 1 ● 1 ? ? ? ? ? ? ? ●
      2081.71. 2091.71.
      2081.74. 2091.72.
      2081.75. 2091.74.
      H6 ● ○ ? ? ? ? ? ? ? ? ●
      2081.81. 210.85.
      2081.84.
      2081.85.
      ITS ● ● ○ ? ? ? ? ? ? ? ●
      2081.91.
      2081.94.
      2081.95.
      H5 ● ○ ? ? ? ? ? ? ? ? ●
      2085.70. 2031.70.
      2085.72.
      2087.70. 2087.71.
      2087.72. 2087.73.
      2082.70. 2082.71.
      H7 ● ? ? ? ? ? ? ● ● ● ●
      2085.71. E7 ● ● ● ? ? ? ? ● ● ● ●
      2086.70. 2032.70.
      2052.70.
      F7 ● ● ? ? ? ? ? ● ● ● ●
      2102.70. 2102.71. G7 ● ● ? ? ? ? ? ● ● ● ●
      2086.71. C9 ● ● ● ? ? ? ? ● ● ● ●
      subject to alterations
      Selection matrix
      Guide Pillars - Guide Bushes
      ● = suitable
      ● 1 = suitable (see pairing classification at the beginning of chapter D)
      £ = conditionally suitable
      Ñ = not suitable
      The combinations should be considered as recommendations. Depending on the installation situation and type of use, a previous examination or test is
      mandatory, since different combinations may result in varying clearance (slide guide) or pretension (ball guides) values.
      Guide Pillars
      Guide pillars to DIN 9825
      Guide pillars, bolt-on type
      Demountable guide pillars
      Guide pillars
      with centre fixing
      Guide pillars
      with centre fixing
      Guide pillars to AFNOR
      Guide pillars to CNOMO
      Guide pillars for large tools
      Guide pillars ECO-LINE
      Guide Bushes
      Tolerance
      range
      Ball bearing guide bushes
      Mounting flanges with
      ball bearing guide bushes
      Guide bushes, sintered ferrite
      Mounting flanges with
      guide bushes, sintered ferrite
      Guide bushes ECO-LINE bronze
      with solid lubrication rings
      Guide bushes
      bronze coated
      Guide bushes ECO-LINE
      bronzeplated
      Guide bushes with solid
      lubrication
      Mounting flanges with Guide
      bushes with solid lubrication
      Guide bushes with solid
      lubrication
      Guide bushes with solid
      lubrication
      Guide bushes with solid
      lubrication
      Guide bushes with solid
      lubrication
      2021.39. 2021.43.
      2021.50.
      4
      2021.46.
      3/1
      2021.46.
      3 2
      202.21.
      1 0
      202.19.
      210.39.
      subject to alterations
      Deflection of Pillars and Bending equation
      Deflection
      4
      0
      0 1000 3000 N 2000
      F
      40
      130
      200
      50
      100
      150
      200
      250
      3
      2
      1
      0
      Radial Force
      µm
      Deflection of Pillars
      The practical applicatoin of these pillars demands a certain amount of
      re-thinking in regard of tool design. Deflection under radially imposed
      load is shown in the diagram of the right.
      Mounting Instructions:
      Coat head and threads of screws with molydenum disulfite.
      Tighten and undo screw twice before final tightening with torque wrench.
      Bending equation
      The transverse load resistance to tool guides is greatly influenced by the
      position of the guide pillar fixing.
      For a tool with a spring-mounted die guide plate and pillar fixing at the top
      or bottom of the tool, the defelction and pillar bending values do not differ
      when the load is applied at the side since the distance (L) from the point of
      application of the force is the same.
      Significantly better pillar bending values can be achieved by fixing the
      guide pillars in the guide plate, i.e. in the center of the pillar.
      Since the distance ( L/2 ) between the point of application of the force and
      the fixing surface is thus halved, the load-bearing capacity is increased by
      eight times.
      In order to keep moving mass to a minimum and thereby minimize detri-
      mental forces of inertia, FIBRO Stripper-Mounted Pillars are made with a
      hollow core. Rigidity of the die set - of paramount importance - remains
      unaffected by the hollow design.
      f
      F
      f
      Bending
      Equation
      f
      F L
      3 E J
      3
      F
      f
      Bending
      Equation
      f
      F L
      3 E J
      3
      F
      Bending
      Equation
      f
      F 2
      3 E J
      3
      L
      D25
      subject to alterations
      Ball cage, small dimension
      Guide bush for ball bearing, small dimension
      Material:
      Cage: Brass
      Balls: Steel hardened (DIN 5401)
      Material:
      Roller bearing steel 100 Cr 6
      Hardness: hardened to 60 + 4 HRC
      Remarks: available in stainless steel on request
      Execution:
      Guide bush bores d 2 fine-honed to IT3
      Note:
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      1
      d
      k
      1
      l
      206.51.
      2
      d
      1
      l
      1
      d
      h3
      3
      d
      h4
      206.54.
      D26
      Ordering Code (example):
      Ball cage, small dimension =206.51.
      Guide diameter d 1 3 mm = 003.
      Length l 1 10 mm= 010
      Order No =206.51.003. 010
      Ordering Code (example):
      Guide bush for ball bearing, small dimension =206.54.
      Guide diameter d 1 3 mm = 003.
      Length l 1 10 mm= 010
      Order No =206.54. 003. 010
      d 1 3 4 5 6 8
      k 1 1 1 1 1
      l 1 Total number of balls
      10 21 21 29 36
      15 35 35 49 61 61
      20 49 49 69 69 69
      25 64 89 89 89
      30 109 109 109
      40 149
      d 1 3 4 5 6 8
      d 2 5 6 7 8 10
      d 3 7 8 10 11 14
      l 1
      10 ● ● ●
      15 ● ● ● ● ●
      20 ● ● ● ● ●
      25 ● ● ● ●
      30 ● ● ●
      35 ● ●
      40 ●
      206.51.
      206.54.
      Ball cage, small dimension
      Guide bush for ball bearing, small
      dimension
      subject to alterations
      Guide pillar DIN 9825/ISO 9182-2


      1
      l
      2
      l
      d 1 h3
      3
      l
      202.19.
      Material:
      Steel, (Core strength: ≥ 900 N/mm²) surface hardened
      Surface hardness: 60 + 3 HRC, Hardness penetration ≥ 1,8 mm ( up to
      ∅ 12, troughhardened)
      Execution:
      fine-ground and superfinished
      Method of manufacturing entails that centre holes are not concentric
      with O.D.
      Note:
      ∅ 3 to ∅ 8 are not supplied classified.
      ∅ 10 to ∅ 12 only available in tolerance range yellow = .10
      Bearing clearance / Preloading see pairing classification at the begin-
      ning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Tolerance range:
      yellow = .10; green = .20; red = .30
      Mounting example
      D27
      d 1 3 4 5 6 8 10 11 12 15 16 19 20 24 25 30 32 38 40 48 50 60 63 80
      l 2 2 2 2 3 3 3 4 4 6 6 6 8 8 8
      l 3 2 2 2 3 3 3 3 3 3 3 3 3 3 3
      l 1
      30 ●
      40 ● ● ●
      50 ● ● ● ●
      60 ● ● ● ●
      80 ● ● ● ● ●
      90 ● ● ●
      100 ● ● ● ● ● ● ● ●
      112 ● ● ● ● ●
      125 ● ● ● ● ● ● ● ●
      140 ● ● ● ● ● ● ● ●
      160 ● ● ● ● ● ● ● ●
      180 ● ● ● ● ● ●
      200 ● ● ● ● ● ●
      224 ● ● ● ● ● ●
      250 ● ● ● ● ● ● ●
      280 ● ● ● ● ● ● ● ●
      315 ● ● ● ● ● ● ● ●
      355 ● ● ● ● ● ● ● ●
      400 ● ● ● ● ● ● ●
      450 ● ● ● ● ● ●
      500 ● ● ● ● ● ●
      550 ● ● ● ●
      600 ● ● ● ●
      700 ● ● ● ●
      800 ● ● ● ●
      Ordering Code (example):
      Guide pillar DIN 9825/ISO 9182-2 =202.19.
      Guide diameter d 1 3 mm = 003.
      Length l 1 30 mm = 030.
      Classification TOL without = (0)
      Order No =202.19. 003. 030. (0)
      202.19. Guide pillar DIN 9825/ISO 9182-2
      subject to alterations
      Guide pillar with ball cage retainer
      Material:
      Steel, (Core strength: ≥ 900 N/mm²) surface hardened
      Surface hardness: 60 + 3 HRC, Hardness penetration ≥ 1,8 mm
      Execution:
      fine-ground and superfinished
      Note:
      Preloading see pairing classification at the beginning of chapter D
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Dimensions of ball cage retainer see 202.91.
      Tolerance range:
      yellow = .10
      green = .20
      red = .30
      min.
      20
      5
      d
      1
      d
      9 l
      1 l
      2 l 8 l
      3 4
      202.17.
      Mounting example
      D28
      d 1 38 40 48 50 60 63
      d 5 42 44 52 54 64 67
      l 2 6 6 8 8 8 8
      KG (l 8 / l 9 )
      1 (31 / 46) ● ● ● ● ● ●
      2 (41 / 56) ● ● ● ● ● ●
      3 (51 / 66) ● ● ● ● ● ●
      4 (61 / 76) ● ● ● ● ● ●
      5 (73 / 89) ● ● ● ● ● ●
      l 1
      160 ● ●
      180 ● ● ● ●
      200 ● ● ● ●
      224 ● ● ● ●
      250 ● ● ● ● ● ●
      280 ● ● ● ● ● ●
      315 ● ● ● ● ● ●
      355 ● ● ● ● ● ●
      400 ● ● ● ● ● ●
      450 ● ● ● ● ● ●
      500 ● ● ● ● ● ●
      550 ● ● ● ● ● ●
      600 ● ● ● ● ● ●
      700 ● ● ● ● ● ●
      800 ● ● ● ● ● ●
      Ordering Code (example):
      Guide pillar with ball cage retainer =202.17.
      Guide diameter d 1 38 mm = 038.
      Length l 1 160 mm = 160.
      Cage retainer size KG 1 = 1.
      Classification TOL yellow = 10
      Order No =202.17. 038. 160. 1. 10
      202.17. Guide pillar with ball cage retainer
      subject to alterations
      Guide pillar with internal thread on both sides, ~DIN 9825/~ISO 9182-2
      202.22. 60°
      1
      d
      h3
      1
      l
      M8
      20
      Material:
      Steel, (Core strength: ≥ 900 N/mm²) surface hardened
      Surface hardness: 60 + 3 HRC, Hardness penetration ≥ 1,8 mm
      Execution:
      fine-ground and superfinished
      Method of manufacturing entails that centre holes are not concentric
      with O.D.
      Note:
      Bearing clearance / Preloading see pairing classification at the begin-
      ning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Tolerance range:
      yellow = .10
      green = .20
      red = .30
      Mounting example
      D29
      d 1 15 16 19 20 24 25 30 32 38 40 48 50 60 63 80
      l 2 4 4 6 6 6 8 8 8
      l 1
      90 ●
      100 ● ● ●
      112 ● ● ●
      125 ● ● ● ●
      140 ● ● ● ●
      160 ● ● ● ● ●
      180 ● ● ● ● ● ●
      200 ● ● ● ● ● ●
      224 ● ● ● ● ● ●
      250 ● ● ● ● ● ● ●
      280 ● ● ● ● ● ● ● ●
      315 ● ● ● ● ● ● ● ●
      355 ● ● ● ● ● ● ● ●
      400 ● ● ● ● ● ● ●
      450 ● ● ● ● ● ●
      500 ● ● ● ● ● ●
      550 ● ● ● ●
      600 ● ● ● ●
      700 ● ● ● ●
      800 ● ● ● ●
      Ordering Code (example):
      Guide pillar with internal thread on both sides, ~DIN 9825/~ISO 9182-2 =202.22.
      Guide diameter d 1 15 mm = 015.
      Length l 1 90 mm = 090.
      Classification TOL yellow = 10
      Order No =202.22. 015.090. 10
      202.22. Guide pillar with internal thread on both sides, ~DIN 9825/~ISO 9182-2
      subject to alterations
      Guide pillar with internal thread on bottom, ~DIN 9825/~ISO 9182-2
      Material:
      Steel, (Core strength: ≥ 900 N/mm²) surface hardened
      Surface hardness: 60 + 3 HRC, Hardness penetration ≥ 1,8 mm
      Execution:
      fine-ground and superfinished
      Method of manufacturing entails that centre holes are not concentric
      with O.D.
      Note:
      Bearing clearance / Preloading see pairing classification at the begin-
      ning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Tolerance range:
      yellow = .10
      green = .20
      red = .30
      60°
      1
      d
      h3
      1
      l
      M8
      20
      202.23.
      Mounting example
      D30
      d 1 15 16 19 20 24 25 30 32 38 40 48 50 60 63 80
      l 2 4 4 6 6 6 8 8 8
      l 1
      90 ●
      100 ● ● ●
      112 ● ● ●
      125 ● ● ● ●
      140 ● ● ● ●
      160 ● ● ● ● ●
      180 ● ● ● ● ● ●
      200 ● ● ● ● ● ●
      224 ● ● ● ● ● ●
      250 ● ● ● ● ● ● ●
      280 ● ● ● ● ● ● ● ●
      315 ● ● ● ● ● ● ● ●
      355 ● ● ● ● ● ● ● ●
      400 ● ● ● ● ● ● ●
      450 ● ● ● ● ● ●
      500 ● ● ● ● ● ●
      550 ● ● ● ●
      600 ● ● ● ●
      700 ● ● ● ●
      800 ● ● ● ●
      Ordering Code (example):
      Guide pillar with internal thread on bottom, ~DIN 9825/~ISO 9182-2 =202.23.
      Guide diameter d 1 15 mm = 015.
      Length l 1 90 mm = 090.
      Classification TOL yellow = 10
      Order No =202.23. 015.090. 10
      202.23. Guide pillar with internal thread on bottom, ~DIN 9825/~ISO 9182-2
      subject to alterations
      Guide pillar with internal thread on top, ~DIN 9825/~ISO 9182-2
      60°
      1
      d
      h3
      1
      l
      M8
      20
      202.24.
      Material:
      Steel, (Core strength: ≥ 900 N/mm²) surface hardened
      Surface hardness: 60 + 3 HRC, Hardness penetration ≥ 1,8 mm
      Execution:
      fine-ground and superfinished
      Method of manufacturing entails that centre holes are not concentric
      with O.D.
      Note:
      Bearing clearance / Preloading see pairing classification at the begin-
      ning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Tolerance range:
      yellow = .10
      green = .20
      red = .30
      Mounting example
      D31
      d 1 15 16 19 20 24 25 30 32 38 40 48 50 60 63 80
      l 2 4 4 6 6 6 8 8 8
      l 1
      90 ●
      100 ● ● ●
      112 ● ● ●
      125 ● ● ● ●
      140 ● ● ● ●
      160 ● ● ● ● ●
      180 ● ● ● ● ● ●
      200 ● ● ● ● ● ●
      224 ● ● ● ● ● ●
      250 ● ● ● ● ● ● ●
      280 ● ● ● ● ● ● ● ●
      315 ● ● ● ● ● ● ● ●
      355 ● ● ● ● ● ● ● ●
      400 ● ● ● ● ● ● ●
      450 ● ● ● ● ● ●
      500 ● ● ● ● ● ●
      550 ● ● ● ●
      600 ● ● ● ●
      700 ● ● ● ●
      800 ● ● ● ●
      Ordering Code (example):
      Guide pillar with internal thread on top, ~DIN 9825/~ISO 9182-2 =202.24.
      Guide diameter d 1 15 mm = 015.
      Length l 1 90 mm = 090.
      Classification TOL yellow = 10
      Order No =202.24. 015.090. 10
      202.24. Guide pillar with internal thread on top, ~DIN 9825/~ISO 9182-2
      subject to alterations
      Guide pillar endwise bolt-on type, ~DIN 9825/~ISO 9182-2
      Material:
      Steel, (Core strength: ≥ 900 N/mm²) surface hardened
      Surface hardness: 60 + 3 HRC, Hardness penetration ≥ 1,8 mm
      Execution:
      fine precision ground
      End face square within 0.005 mm in 100 mm
      Note:
      Bearing clearance / Preloading see pairing classification at the begin-
      ning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Tolerance range:
      yellow = .10
      green = .20
      red = .30
      d
      60°
      d 1 = 15/16
      19/20
      24/25
      30/32
      38/40
      d 1 = 48/50
      60/63
      d 1 = 80
      3 x 120°
      Hole pattern for column (pillar)
      fastening
      6
      d 6
      l 1 - 3
      0,005/100 A

      3
      min.
      t
      1,5 x M
      min.
      A
      d 1 h3
      M
      d 4
      d 3
      202.21.
      D32
      d 1 15 16 19 20 24 25 30 32 38 40 48 50 60 63 80
      d 3 9 11 14 18 18 14 18 18
      d 4 17 20 22 28 28 22 28 28
      d 6 - - - - - 28 34 54
      t 12 14 16 20.5 20.5 16 20.5 20.5
      M 8 10 12 16 16 12 16 16
      Cap screw M8x35 M10x40 M12x40 M16x40 M16x40 M12x50 M16x60 M16x60
      Tightening torque [Nm] 21 37 85 150 150 85 200 200
      l 1
      90 ●
      100 ● ● ●
      112 ● ● ●
      125 ● ● ● ●
      140 ● ● ● ●
      160 ● ● ● ● ●
      180 ● ● ● ● ● ●
      200 ● ● ● ● ● ●
      224 ● ● ● ● ● ●
      250 ● ● ● ● ● ● ●
      280 ● ● ● ● ● ● ● ●
      315 ● ● ● ● ● ● ● ●
      355 ● ● ● ● ● ● ● ●
      400 ● ● ● ● ● ● ●
      450 ● ● ● ● ● ●
      500 ● ● ● ● ● ●
      550 ● ● ● ●
      600 ● ● ● ●
      700 ● ● ● ●
      800 ● ● ● ●
      Ordering Code (example):
      Guide pillar endwise bolt-on type, ~DIN 9825/~ISO 9182-2 =202.21.
      Guide diameter d 1 15 mm = 015.
      Length l 1 90 mm = 090.
      Classification TOL yellow = 10
      Order No =202.21. 015.090. 10
      202.21. Guide pillar endwise bolt-on type, ~DIN 9825/~ISO 9182-2
      subject to alterations D33
      subject to alterations
      Guide pillar endwise bolt-on type with ball cage, ~DIN 9825/~ISO 9182-2
      Material:
      Steel, (Core strength: ≥ 900 N/mm²) surface
      hardened
      Surface hardness: 60 + 3 HRC, Hardness pene-
      tration ≥ 1,8 mm
      Execution:
      fine precision ground
      End face square within 0.005 mm in 100 mm
      Note:
      Preloading see pairing classification at the
      beginning of chapter D
      Matching guide combinations, see selection
      matrix at the beginning of chapter D.
      Dimensions of ball cage retainer see 202.91.
      Tolerance range:
      yellow = .10
      green = .20
      red = .30
      1,5 x m
      1 l
      4
      d
      1
      d
      m
      3
      d
      t
      min.
      20
      5
      d
      9 l
      2 l 8 l
      4
      202.55.
      X
      d
      60°
      d 1 = 15/16
      19/20
      24/25
      30/32
      38/40
      d 1 = 48/50
      60/63
      3 x 120°
      Hole pattern for column (pillar)
      fastening
      6
      D34
      subject to alterations
      Guide pillar endwise bolt-on type with ball cage, ~DIN 9825/~ISO 9182-2
      D35
      d 1 38 40 48 50 60 63
      d 3 18 18 14 14 18 18
      d 4 28 28 22 22 28 28
      d 5 42 44 52 54 64 67
      d 6 - - 28 28 34 34
      t 20.5 20.5 16 16 20.5 20.5
      m 16 16 12 12 16 16
      Cap screw M16x40 M16x40 M12x50 M12x50 M16x60 M16x60
      Tightening torque [Nm] 150 150 85 85 200 200
      KG (l 8 / l 9 )
      1 (31 / 46) ● ● ● ● ● ●
      2 (41 / 56) ● ● ● ● ● ●
      3 (51 / 66) ● ● ● ● ● ●
      4 (61 / 76) ● ● ● ● ● ●
      5 (73 / 89) ● ● ● ● ● ●
      l 1
      160 ● ●
      180 ● ● ● ●
      200 ● ● ● ●
      224 ● ● ● ●
      250 ● ● ● ● ● ●
      280 ● ● ● ● ● ●
      315 ● ● ● ● ● ●
      355 ● ● ● ● ● ●
      400 ● ● ● ● ● ●
      450 ● ● ● ● ● ●
      500 ● ● ● ● ● ●
      550 ● ● ● ● ● ●
      600 ● ● ● ● ● ●
      700 ● ● ● ● ● ●
      800 ● ● ● ● ● ●
      Ordering Code (example):
      Guide pillar endwise bolt-on type with ball cage, ~DIN 9825/~ISO 9182-2 =202.55.
      Guide diameter d 1 38 mm = 038.
      Length l 1 160 mm = 160.
      Cage retainer size KG 1 = 1.
      Classification TOL yellow = 10
      Order No =202.55. 038. 160. 1. 10
      202.55. Guide pillar endwise bolt-on type with ball cage, ~DIN 9825/~ISO 9182-2
      subject to alterations
      Guide pillar "ECO-Line", ~DIN 9825/~ISO 9182-2
      Material:
      Steel, surface hardened
      Surface hardness: 60 + 3 HRC, Hardness penetration ≥ 1,8 mm
      Execution:
      ground
      Method of manufacturing entails that centre holes are not concentric
      with O.D.
      Note:
      Guide pillars only recommended for use with sliding guides!
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.


      1
      l
      2
      l
      d 1 h4
      3
      202.29.
      Mounting example
      D36
      d 1 15 16 19 20 24 25 30 32 38 40 48 50 60 63 80
      l 2 4 4 6 6 6 8 8 8
      l 1
      90 ●
      100 ● ● ●
      112 ● ● ●
      125 ● ● ● ●
      140 ● ● ● ●
      160 ● ● ● ● ●
      180 ● ● ● ● ● ●
      200 ● ● ● ● ● ●
      224 ● ● ● ● ● ●
      250 ● ● ● ● ● ● ●
      280 ● ● ● ● ● ● ● ●
      315 ● ● ● ● ● ● ● ●
      355 ● ● ● ● ● ● ● ●
      400 ● ● ● ● ● ● ●
      450 ● ● ● ● ● ●
      500 ● ● ● ● ● ●
      550 ● ● ● ●
      600 ● ● ● ●
      700 ● ● ● ●
      800 ● ● ● ●
      Ordering Code (example):
      Guide pillar "ECO-Line", ~DIN 9825/~ISO 9182-2 =202.29.
      Guide diameter d 1 15 mm = 015.
      Length l 1 90 mm = 090
      Order No =202.29. 015.090
      202.29. Guide pillar "ECO-Line", ~DIN 9825/~ISO 9182-2
      subject to alterations D37
      subject to alterations
      Guide pillar "ECO-Line" endwise bolt-on type, ~DIN 9825/~ISO 9182-2
      Material:
      Steel, surface hardened
      Surface hardness: 60 + 3 HRC, Hardness pene-
      tration ≥ 1,8 mm
      Execution:
      ground
      Note:
      Guide pillars only recommended for use with
      sliding guides!
      Matching guide combinations, see selection
      matrix at the beginning of chapter D.
      l 1 - 3

      3
      min.
      t
      1,5 x M
      min.
      d 1 h4
      M
      d 4
      d 3
      202.31.
      X
      d
      60°
      d 1 = 15/16
      19/20
      24/25
      30/32
      38/40
      d 1 = 48/50
      60/63
      d 1 = 80
      3 x 120°
      Hole pattern for column (pillar)
      fastening
      6
      d 6
      D38
      subject to alterations
      Guide pillar "ECO-Line" endwise bolt-on type, ~DIN 9825/~ISO 9182-2
      D39
      d 1 15 16 19 20 24 25 30 32 38 40 48 50 60 63 80
      d 3 9 11 14 18 18 14 18 18
      d 4 17 20 22 28 28 22 28 28
      d 6 - - - - - 28 34 54
      t 12 14 16 20.5 20.5 16 20.5 20.5
      M 8 10 12 16 16 12 16 16
      Cap screw M8x35 M10x40 M12x40 M16x40 M16x40 M12x50 M16x60 M16x60
      Tightening torque [Nm] 21 37 85 150 150 85 200 200
      l 1
      90 ●
      100 ● ● ●
      112 ● ● ●
      125 ● ● ● ●
      140 ● ● ● ●
      160 ● ● ● ● ●
      180 ● ● ● ● ● ●
      200 ● ● ● ● ● ●
      224 ● ● ● ● ● ●
      250 ● ● ● ● ● ● ●
      280 ● ● ● ● ● ● ● ●
      315 ● ● ● ● ● ● ● ●
      355 ● ● ● ● ● ● ● ●
      400 ● ● ● ● ● ● ●
      450 ● ● ● ● ● ●
      500 ● ● ● ● ● ●
      550 ● ● ● ●
      600 ● ● ● ●
      700 ● ● ● ●
      800 ● ● ● ●
      Ordering Code (example):
      Guide pillar "ECO-Line" endwise bolt-on type, ~DIN 9825/~ISO 9182-2 =202.31.
      Guide diameter d 1 15 mm = 015.
      Length l 1 90 mm = 090
      Order No =202.31. 015.090
      202.31. Guide pillar "ECO-Line" endwise bolt-on type, ~DIN 9825/~ISO 9182-2
      subject to alterations
      Guide pillar, conical, DIN 9825/ISO 9182-4/AFNOR
      Description:
      FIBRO demountable pillars with conical shaft
      2021.50. are recommended where die shar-
      pening etc. demands frequent demounting
      and re-fitting.
      Material:
      Steel, (Core strength: ≥ 900 N/mm²) surface
      hardened
      Surface hardness: 60 + 3 HRC, Hardness pene-
      tration ≥ 1,8 mm
      Execution:
      fine-ground and superfinished
      Method of manufacturing entails that centre
      holes are not concentric with O.D.
      Note:
      Matching retaining bushes 2021.39./210.39.
      and retaining discs 2021.53./202.53. to be
      ordered separately.
      Preloading see pairing classification at the
      beginning of chapter D
      Matching guide combinations, see selection
      matrix at the beginning of chapter D.
      Tolerance range:
      yellow = .10
      green = .20
      red = .30
      20
      M8
      3 l
      1 l

      l
      25
      d 1 h3
      4°17'20"
      M
      2021.50.
      X
      Mounting example
      D40
      subject to alterations
      Guide pillar, conical, DIN 9825/ISO 9182-4/AFNOR
      D41
      d 1 16 19 20 24 25 25 30 32 32 38 40 40 48 50 50 60 63 63 63
      d 5 22 22 25 25 32 32 40 40 50 50 63 63 63
      M 6 6 8 8 8 8 8 8 10 10 12 12 12
      l 3 28 38 35 45 48 61 48 61 58 78 69 77 97
      l 1 l
      82 100
      95 113
      100 126 123
      112 130 138 135 145
      125 143 151 148 158 158 158
      140 166 163 173 186 173 180
      160 186 183 193 193 206 193 206 200 211
      180 206 203 213 213 226 213 226 220 231 237
      200 226 223 233 233 233 240 260 251 257
      224 247 257 270 257 270 264 275
      250 273 283 283 296 290 310 301 307 327
      280 313 313 320 340 331 337
      315 348 355 375 366 372 392
      355 395 406 432
      400 477
      Ordering Code (example):
      Guide pillar, conical, DIN 9825/ISO 9182-4/AFNOR =2021.50.
      Guide diameter d 1 16 mm = 016.
      Guide length l 1 82 mm = 082.
      Cone length l 3 28 mm = 028.
      Classification TOL yellow = 10
      Order No =2021.50. 016. 082. 028. 10
      2021.50. Guide pillar, conical, DIN 9825/ISO 9182-4/AFNOR
      subject to alterations
      Demountable guide pillar, conical, with ball cage retainer,
      DIN 9825/ISO 9182-4/AFNOR
      Description:
      FIBRO demountable pillars with conical shaft
      2021.58. are recommended where die shar-
      pening etc. demands frequent demounting
      and re-fitting.
      Material:
      Steel, (Core strength: ≥ 900 N/mm²) surface
      hardened
      Surface hardness: 60 + 3 HRC, Hardness pene-
      tration ≥ 1,8 mm
      Execution:
      fine-ground and superfinished
      Note:
      Dimensions of ball cage retainer see 202.91.
      Matching retaining bushes 2021.39./210.39.
      and retaining discs 2021.53./202.53. to be
      ordered separately.
      Preloading see pairing classification at the
      beginning of chapter D
      Matching guide combinations, see selection
      matrix at the beginning of chapter D.
      Tolerance range:
      yellow = .10
      green = .20
      red = .30
      4
      1 l
      l
      3 l
      min.
      20
      5
      d
      9 l
      2 l 8 l
      1
      d
      2021.58.
      m
      X
      Mounting example
      D42
      subject to alterations
      Demountable guide pillar, conical, with ball cage retainer,
      DIN 9825/ISO 9182-4/AFNOR
      D43
      d 1 38 38 40 40 48 50 50 60 63 63 63
      d 5 42 42 44 44 52 54 54 64 67 67 67
      m 8 8 8 8 10 10 8 12 12 12 12
      l 3 48 48 48 61 58 58 78 69 69 77 97
      KG (l 8 / l 9 )
      1 (31 / 46) ● ● ● ● ● ● ● ● ● ●
      2 (41 / 56) ● ● ● ● ● ● ● ● ● ●
      3 (51 / 66) ● ● ● ● ● ● ● ● ● ●
      4 (61 / 76) ● ● ● ● ● ● ● ● ● ●
      5 (73 / 89) ● ● ● ● ● ● ● ● ● ●
      l 1 l
      125 158 158 158
      140 173 173 173 180 180
      160 193 193 193 206 200 200 211 211
      180 213 213 213 226 220 220 231 231 237
      200 233 233 233 240 240 260 251 251 257
      224 257 257 257 270 264 264 275 275
      250 283 283 283 296 290 290 310 301 301 307 327
      280 313 313 313 320 320 340 331 331 337
      315 348 348 348 355 355 375 366 366 372 392
      355 395 395 406 406 432
      400 477
      Ordering Code (example):
      Demountable guide pillar, conical, with ball cage retainer, DIN 9825/
      ISO 9182-4/AFNOR =2021.58.
      Guide diameter d 1 38 mm = 038.
      Guide length l 1 125 mm = 125.
      Cone length l 3 48 mm = 048.
      Cage retainer size KG 1 = 1
      Classification TOL yellow = 1
      Order No =2021.58. 038. 125. 048. 11
      2021.58. Demountable guide pillar, conical, with ball cage retainer, DIN 9825/ISO 9182-4/
      AFNOR
      subject to alterations
      Retaining disc with countersunk head cap screw, DIN 9825/ISO 9182-4
      Retaining disc with socket cap screw, ~ AFNOR
      Material:
      Retaining disc: Steel, burnished
      Countersunk head cap screw DIN 7991/ISO 10642
      Note:
      Has to be ordered separately to guide pillar, conical according to
      DIN 9825 / ISO 9182-4 2021.50. or 2021.58.
      Material:
      Retaining disc: Steel, burnished
      Socket head cap screw DIN 6912
      Note:
      Has to be ordered separately to guide pillar, conical according to AFNOR
      2021.50. or 2021.58.
      Mounting example
      Mounting example
      M
      s
      5
      d
      2021.53.
      M
      s
      5
      d
      202.53.
      D44
      Order No Nominal-ø Pillar-ø d 5 s M
      2021.53.020 20 19/20 22 3 M6
      2021.53.025 25 24/25 25 3 M8
      2021.53.032 32 30/32 32 3 M8
      2021.53.040 40 38/40 40 5 M8
      2021.53.050 50 48/50 50 5 M10
      2021.53.063 63 60/63 63 6 M12
      Order No Pillar-ø d 5 s M
      202.53.016 16 18 3 M6
      202.53.020 20 22 3 M6
      202.53.025 25 25 4 M8
      202.53.032 32 32 4 M8
      202.53.040 40 40 4 M8
      202.53.050 50 50 5 M10
      202.53.063 63 63 6 M12
      2021.53.
      202.53. Retaining disc with socket cap
      screw, ~ AFNOR
      Retaining disc with countersunk
      head cap screw, DIN 9825/
      ISO 9182-4
      subject to alterations
      Retaining bush for guide pillar conical 2021.50., DIN 9825/ISO 9182-4
      js4
      H5
      13
      6
      4 l
      2 l
      l
      d
      1 d
      4 d
      2 d
      5 d
      3 l
      a
      1 a
      3
      4°17'20"
      7 d
      6 d
      2021.39.
      Material:
      16 MnCr5,
      case hardened 58 ± 2 HRC
      Hardness penetration: ≥ 0,8 mm
      Execution:
      Retaining bore, outside diameter and shoulder precision ground.
      Note:
      Outside diameter d 3 same as that of guide bushes 2081. and 2091.
      The attachment is with 3 Screw clamp, from ∅ d 1 = 38 with 4 Screw
      clamp , which are included in delivery (Order No: 207.45 - Screw clamp
      incl. socket cap screw DIN 6912, Head ∅ 13).
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      3
      d
      H5
      js4
      Mounting example
      D45
      d 1 19 20 24 25 30 32 38 40 48 50 60 63
      d 2 32 40 48 58 70 85
      d 3 32 40 48 58 70 85
      d 4 40 48 56 66 80 95
      d 5 23 26 33 41 51 64
      d 6 53 60 67 77 91 106
      d 7 65.7 72.7 79.7 89.7 103.7 118.7
      a 20.9 22.65 24.4 35.3 40.2 45.5
      a 1 30.3 33.4 36.4 35.3 40.2 45.5
      l 42 49 49 59 52 62 62 75 65 78 78 95
      l 2 30 37 37 47 37 47 47 60 47 60 60 77
      l 3 12 12 15 15 18 18
      l 4 39 36 49 49 59 70
      Ordering Code (example):
      Retaining bush for guide pillar conical 2021.50., DIN 9825/ISO 9182-4 =2021.39.
      Nominal diameter d 1 19 mm = 019.
      Installation length l 2 30 mm = 030
      Order No =2021.39. 019. 030
      2021.39. Retaining bush for guide pillar conical 2021.50., DIN 9825/ISO 9182-4
      subject to alterations
      Retaining bush for guide pillar conical 2021.50.,~ AFNOR
      Material:
      16 MnCr5,
      case hardened 58 ± 2 HRC
      Hardness penetration: ≥ 0,8 mm
      Execution:
      Retaining bore, outside diameter and shoulder precision ground.
      Note:
      Outside diameter d 3 same as that of guide bush 210.
      The attachment is with 3 Screw clamp, from ∅ d 1 = 38 with 4 Screw
      clamp , which are included in delivery (Order No: 207.45 - Screw clamp
      incl. socket cap screw DIN 6912, Head ∅ 13).
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      3
      d
      H5
      m5
      js4
      H5
      13
      6
      4 l
      2 l
      l
      d
      1 d
      4 d
      2 d
      5 d
      3 l
      a
      1 a
      3
      4°17'20"
      7 d
      6 d
      210.39.
      Mounting example
      D46
      d 1 16 20 25 32 40 50 63
      d 2 29 32 41 51 65 84 100
      d 3 28 32 40 50 63 80 90
      d 4 32 36 45 56 70 90 110
      d 5 19 23 26 33 41 51 64
      d 6 45 49 57 67 81 101 121
      d 7 57.7 61.7 69.7 79.7 93.7 113.7 133.7
      a 18.9 19.9 21.9 24.4 36 43 50.1
      a 1 26.9 28.6 32.1 36.4 36 43 50.1
      l 40 50 50 60 63 76 63 76 79 96 98 118
      l 2 30 38 38 48 48 61 48 61 61 78 78 98
      l 3 10 12 12 15 15 18 20
      l 4 30 40 37 47 50 63 50 63 63 80 79 99
      Ordering Code (example):
      Retaining bush for guide pillar conical 2021.50.,~ AFNOR =210.39.
      Nominal diameter d 1 16 mm = 016.
      Installation length l 2 30 mm = 030
      Order No =210.39. 016. 030
      210.39. Retaining bush for guide pillar conical 2021.50.,~ AFNOR
      subject to alterations
      Guide pillar for large tools, DIN 9833/ISO 9182-3
      15°
      l 1
      f6 1
      d
      M12
      l 2
      24
      r
      r6 1
      d
      H7
      min. 5
      l 5
      l 6

      r
      3
      d
      d 5
      2022.19.
      Material:
      Steel, surface hardened
      Surface hardness: 60 + 4 HRC, Hardness penetration 1,5 + 1 mm
      Execution:
      ground
      up to ∅ d 1 = 80 without central hole
      by ∅ d 1 = 80 with 1 lifting thread M12
      from ∅ d 1 = 100 with central hole (through)
      and with 2 lifting threads M12
      Note:
      Guide pillar is recommended to be used only with guide elements with
      solid lubricant.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      D47
      d 1 25 32 40 50 63 80 100 125 160
      d 3 - - - - - - 50 65 95
      d 5 - - - - - - 72 90 132
      r 2 2 2 2.5 2.5 3 3 4 4
      l 2 8 8 8 10 10 10 10 12 12
      l 5 40 45 56 70 80 100 125 140 180
      l 6 4 4 4 4 4 4 4 5 5
      l 1
      125 ● ●
      140 ● ● ●
      160 ● ● ● ●
      180 ● ● ● ● ●
      200 ● ● ● ● ●
      224 ● ● ● ● ● ●
      250 ● ● ● ● ● ●
      280 ● ● ● ● ●
      315 ● ● ● ● ●
      355 ● ● ● ● ●
      400 ● ● ● ● ●
      450 ● ● ● ●
      500 ● ● ● ●
      560 ●
      Ordering Code (example):
      Guide pillar for large tools, DIN 9833/ISO 9182-3 =2022.19.
      Guide diameter d 1 25 mm = 025.
      Length l 1 125 mm = 125
      Order No =2022.19. 025. 125
      2022.19. Guide pillar for large tools, DIN 9833/ISO 9182-3
      subject to alterations
      Guide pillar with 5° pilot taper, to VW-Standard
      Material:
      Steel, surface hardened
      Surface hardness: 60 + 4 HRC, Hardness penetration 1,5 + 1 mm
      Execution:
      precision ground
      ∅ d 1 = 80 with 1 lifting thread M12
      Note:
      Guide pillar is recommended to be used only with guide elements with
      solid lubricant.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Application:
      Floating support in upper half of trimming tools.
      H6
      2
      d
      M12
      f6 1
      d

      -2

      0
      r6 2
      d
      r
      r
      r 1
      l 1
      l 5
      l 6
      25
      24
      2022.13.
      Mounting example
      D48
      d 1 40 50 63 80
      d 2 40 50 63 80
      l 5 56 70 80 100
      l 6 4 4 4 4
      r 2 2.5 2.5 3
      r 1 3 5 6 8
      l 1
      140 ●
      160 ● ●
      180 ● ● ●
      200 ● ● ●
      224 ● ● ● ●
      250 ● ● ● ●
      280 ● ● ● ●
      315 ● ● ●
      355 ● ● ●
      400 ● ●
      Ordering Code (example):
      Guide pillar with 5° pilot taper, to VW-Standard =2022.13.
      Guide diameter d 1 40 mm = 040.
      Length l 1 140 mm = 140
      Order No =2022.13. 040. 140
      2022.13. Guide pillar with 5° pilot taper, to VW-Standard
      subject to alterations
      Guide pillar with pilot tapper, VDI 3356
      l 1
      r6 1
      d
      H7
      min. 5
      r
      f6 1
      d
      M12
      15°
      l 2 l 5
      l 6
      24

      r
      3
      d
      d 5
      2022.15.
      Material:
      Steel, surface hardened
      Surface hardness: 60 + 4 HRC, Hardness penetration 1,5 + 1 mm
      Execution:
      ground
      ∅ d 1 = 80 without central hole with 1 lifting thread M12
      from ∅ d 1 = 100 with central hole (through)
      and with 2 lifting threads M8
      Note:
      Guide pillar is recommended to be used only with guide elements with
      solid lubricant.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      D49
      d 1 80 100 125 160
      d 3 - 50 65 95
      d 5 - 62 82 119
      r 3 3 4 4
      l 2 50 50 50 50
      l 5 100 125 140 180
      l 6 4 4 5 5
      l 1
      280 ●
      315 ● ●
      355 ● ● ●
      400 ● ● ●
      450 ● ● ● ●
      500 ● ●
      560 ●
      Ordering Code (example):
      Guide pillar with pilot tapper, VDI 3356 =2022.15.
      Guide diameter d 1 80 mm = 080.
      Length l 1 280 mm = 280
      Order No =2022.15. 080. 280
      2022.15. Guide pillar with pilot tapper, VDI 3356
      subject to alterations
      Guide pillar with groove, to VW
      Material:
      Steel, surface hardened
      Surface hardness: 60 + 4 HRC, Hardness penetration 1,5 + 1 mm
      Execution:
      ground
      ∅ d 1 = 80 with 1 lifting thread M12
      Note:
      Secure with locating plate 2022.40.1.
      Guide pillar is recommended to be used only with guide elements with
      solid lubricant.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.

      r
      15°
      f6 1
      d
      24
      l 2
      l 1
      l 5
      l 7
      s
      e 2
      t
      r6 1
      d
      H7
      l 6
      r
      2022.17.
      D50
      d 1 25 32 40 50 63 80
      l 2 8 8 8 10 10 10
      l 5 40 45 56 70 80 100
      l 6 4 4 4 4 4 4
      l 7 7 7 10 10 12 12
      r 2 2 2 2.5 2.5 3
      e 2 20.5 24 29.5 33.5 43 50
      t 3 3 4 4 6.5 8
      l 1
      125 ● ●
      140 ● ● ●
      160 ● ● ● ●
      180 ● ● ● ● ●
      200 ● ● ● ● ●
      224 ● ● ● ● ● ●
      250 ● ● ● ● ●
      280 ● ● ● ●
      315 ● ● ●
      355 ● ● ●
      400 ● ●
      450 ●
      500 ●
      Ordering Code (example):
      Guide pillar with groove, to VW =2022.17.
      Guide diameter d 1 25 mm = 025.
      Length l 1 125 mm = 125
      Order No =2022.17. 025. 125
      2022.17. Guide pillar with groove, to VW
      subject to alterations
      Locating plate for guide pillar, to VW
      b 1
      d 9
      b
      s
      a
      e 1
      c x 45°
      2022.40.1.
      Material:
      Steel
      Note:
      Screws are not included.
      Fixing:
      Use socket cap screws DIN EN ISO 4762.
      D51
      Order No Pillar-ø a b s c b 1 e 1 d 9
      2022.40.1.02 25 32 40 20 5 1 10 20 9
      2022.40.1.04 40 50 48 25 8 2 12.5 24 11
      2022.40.1.06 63 80 60 34 10 2 17 30 14
      Ordering Code (example):
      Locating plate for guide pillar, to VW =2022.40.1.
      Nominal size NENN 02 = 02
      Order No =2022.40.1. 02
      2022.40.1. Locating plate for guide pillar,
      to VW
      subject to alterations
      Guide pillar with retaining ring groove, ~AFNOR
      Material:
      Steel, surface hardened
      Surface hardness: 60 + 4 HRC, Hardness penetration 1,5 + 1 mm
      Execution:
      ground
      Note:
      Guide pillar is recommended to be used only with guide elements with
      solid lubricant.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Fixing:
      Clamping flange with retaining ring, without screws, 2073.46.□□□
      order separately.
      15°
      g
      t
      d 5 d
      d 1d8
      5
      l 1-1
      d 1 h5
      l
      3
      4
      d
      c
      d 1 h5
      2022.25.
      D52
      d 1 25 32 40 50 63 80 100
      d 3 22.3 27.8 35.8 45.8 56.8 73.8 93.8
      g 2.7 4.2 4.2 4.2 6.2 6.2 6.2
      l 5 25 32 63 80 100 125 160
      l 1
      100 ●
      125 ● ●
      140 ● ●
      160 ● ●
      180 ● ● ●
      200 ● ● ● ●
      220 ● ● ● ●
      250 ● ● ● ●
      280 ● ● ●
      315 ● ● ● ●
      355 ● ● ● ●
      400 ● ● ● ●
      450 ● ● ●
      500 ● ● ●
      Ordering Code (example):
      Guide pillar with retaining ring groove, ~AFNOR =2022.25.
      Guide diameter d 1 25 mm = 025.
      Length l 1 100 mm = 100
      Order No =2022.25. 025. 100
      2022.25. Guide pillar with retaining ring groove, ~AFNOR
      subject to alterations
      Clamping flange with retaining ring, ~AFNOR
      t
      c
      e 1
      e 1
      a
      a
      g
      d 5
      d 4
      2073.46.
      Material:
      Clamping flange: Steel
      Retaining ring: Spring steel wire
      Note:
      For fixing the guide pillar 2022.25.
      Order No. for reordering retaining ring: 2073.46.□□□.2
      D53
      Order No
      Pillar-ø
      d 1 d 4 d 5 a c g e 1 t
      2073.46.025 25 6.6 11 45 10 2.7 31 7
      2073.46.032 32 6.6 11 56 10 4.2 36 7
      2073.46.040 40 6.6 11 70 12 4.2 50 7
      2073.46.050 50 9 15 80 14 4.2 55 9
      2073.46.063 63 11 18 100 18 6.2 70 11
      2073.46.080 80 13.5 20 110 20 6.2 80 13
      2073.46.100 100 13.5 20 140 20 6.2 100 13
      2073.46. Clamping flange with retaining
      ring, ~AFNOR
      subject to alterations
      Guide pillar with snap ring groove, to Mercedes-Benz Standard
      Material:
      Steel, surface hardened
      Surface hardness: 60 + 4 HRC, Hardness pene-
      tration 1,5 + 1 mm
      Execution:
      ground
      up to ∅ d 1 = 80 without central hole
      by ∅ d 1 = 80 with 1 lifting thread M12
      from ∅ d 1 = 100 with central hole (through)
      and with 2 lifting threads M12
      Note:
      Secure with snap ring 2061.48.
      Guide pillar is recommended to be used only
      with guide elements with solid lubricant.
      Matching guide combinations, see selection
      matrix at the beginning of chapter D.
      Assembly guide lines / Dimensional require-
      ments and tolerances at the end of chapter D.
      d 5
      15°
      3
      d

      l 1
      d 7
      d 6
      r6 1
      d
      H7
      min. 5
      8 l
      l 7
      f6 1
      d
      M12
      l 2
      l 5
      l 6
      24
      r
      r
      X
      2022.16.
      X
      „ X “
      b
      s
      b 1
      b 2
      3
      r 1
      Mounting example
      D54
      subject to alterations
      Guide pillar with snap ring groove, to Mercedes-Benz Standard
      D55
      d 1 40 50 63 80 100 125 160
      d 3 - - - - 50 65 95
      d 5 - - - - 72 90 132
      d 6 33 43 55.7 71.4 89.9 114.9 148.9
      r 2 2.5 2.5 3 3 4 4
      r 1 1 1 1 1.05 1.3 1.3 1.3
      l 2 8 10 10 10 10 12 12
      l 5 56 70 80 100 125 140 180
      l 6 4 4 4 4 4 5 5
      l 7 15 15 15 21 31 31 31
      l 8 14 14 14 20 30 30 30
      b 1 2 2 2 2.1 2.6 2.6 2.6
      b 2 3.2 3.2 3.2 4.2 5.2 5.2 5.2
      l 1
      140 ●
      160 ● ●
      180 ● ● ●
      200 ● ● ●
      224 ● ● ● ●
      250 ● ● ● ● ●
      280 ● ● ● ● ●
      315 ● ● ● ● ●
      355 ● ● ● ● ●
      400 ● ● ● ● ●
      450 ● ● ● ●
      500 ● ● ● ●
      560 ●
      Ordering Code (example):
      Guide pillar with snap ring groove, to Mercedes-Benz Standard =2022.16.
      Guide diameter d 1 40 mm = 040.
      Length l 1 140 mm = 140
      Order No =2022.16. 040. 140
      2022.16. Guide pillar with snap ring groove, to Mercedes-Benz Standard
      subject to alterations
      Guide pillar with pilot tapper and groove, to Mercedes-Benz Standard
      Material:
      Steel, surface hardened
      Surface hardness: 60 + 4 HRC, Hardness penetration 1,5 + 1 mm
      Execution:
      ground
      ∅ d 1 = 80 without central hole with 1 lifting thread M12
      from ∅ d 1 = 100 with central hole (through)
      and with 2 lifting threads M8
      Note:
      Secure with snap ring 2061.48.
      Guide pillar is recommended to be used only with guide elements with
      solid lubricant.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      „ X “
      b
      s
      b 1
      b 2
      3
      r 1
      3
      d
      X

      l 1
      d 7
      d 6
      r6 1
      d
      H7
      min. 5
      8 l
      l 7
      r
      f6 1
      d
      M12
      15°
      l 2
      l 5
      l 6
      24
      r
      d 5
      2022.12.
      Mounting example
      D56
      d 1 80 100 125 160
      d 3 - 50 65 95
      d 5 - 62 82 119
      d 6 71.4 89.9 114.9 148.9
      r 3 3 4 4
      r 1 1.05 1.3 1.3 1.3
      l 2 50 50 50 50
      l 5 100 125 140 180
      l 6 4 4 5 5
      l 7 21 31 31 31
      l 8 20 30 30 30
      b 1 2.1 2.6 2.6 2.6
      b 2 4.2 5.2 5.2 5.2
      l 1
      280 ●
      315 ● ●
      355 ● ● ●
      400 ● ● ●
      450 ● ● ● ●
      500 ● ●
      560 ●
      Ordering Code (example):
      Guide pillar with pilot tapper and groove, to Mercedes-Benz Stan-
      dard =2022.12.
      Guide diameter d 1 80 mm = 080.
      Length l 1 280 mm = 280
      Order No =2022.12. 080. 280
      2022.12. Guide pillar with pilot tapper and groove, to Mercedes-Benz Standard
      subject to alterations
      Snap ring
      d 7
      s
      b 3
      2061.48.
      „ X “
      b
      s
      b 1
      b 2
      3
      r 1
      Mounting example
      Material:
      Spring strip steel
      Note:
      For securing guide pillars 2022.12. and 2022.16.
      D57
      Order No Pillar-ø b 1 b 3 d 7 s
      2061.48.040 40 1.7 2.3 43 1.5
      2061.48.050 50 1.7 2.3 53 1.5
      2061.48.063 63 1.7 2.3 66 1.5
      2061.48.080 80 2.1 2.8 83.2 2
      2061.48.100 100 2.6 3.4 103.8 2.5
      2061.48.125 125 2.6 3.4 128.8 2.5
      2061.48.160 160 2.6 4 164.3 2.5
      2061.48. Snap ring
      subject to alterations
      Guide pillar with groove, to CNOMO
      Material:
      Steel, surface hardened
      Surface hardness: 60 + 3 HRC, Hardness penetration 2 + 1,6 mm
      Execution:
      precision ground
      Note:
      Fit for receiving bore H7.
      Guide pillar is recommended to be used only with guide elements with
      solid lubricant.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      10
      15°
      M12
      1
      d
      2
      d
      -0,5 2
      d
      6
      d
      R4,5
      2
      l
      30
      1
      l
      6
      l
      12
      10
      = =
      90°
      2022.16.45.
      Mounting example
      D58
      d 1 80 100
      Tolerance -0,010/-0,025 -0,010/-0,025
      d 2 80 100
      Tolerance +0,04/+0,05 +0,045/+0,055
      d 6 75 95
      l 2 16 16
      l 6 110 140
      l 1
      350 ●
      400 ● ●
      450 ●
      Ordering Code (example):
      Guide pillar with groove, to CNOMO =2022.16.45.
      Guide diameter d 1 80 mm = 080.
      Length l 1 350 mm = 350
      Order No =2022.16.45. 080. 350
      2022.16.45. Guide pillar with groove, to CNOMO
      subject to alterations
      Guide pillar with groove
      3
      l
      e
      m
      d
      15°
      1
      d
      -0,5 2
      d
      6
      d
      R4,5
      2
      l
      25
      1
      l
      6
      l
      10
      90°
      1 -1
      2
      d p6
      6
      l /2
      60°
      2022.16.48.
      Material:
      Steel, surface hardened
      Surface hardness: 60 + 3 HRC, Hardness penetration 2 + 1,6 mm
      Execution:
      precision ground
      Note:
      Fit for receiving bore H7.
      Guide pillar is recommended to be used only with guide elements with
      solid lubricant.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Mounting example
      D59
      d 1 25 30 40 50 60 65 80 100
      Tolerance -0,005/-0,015 -0,005/-0,015 -0,005/-0,015 -0,005/-0,015 -0,01/-0,02 -0,01/-0,025 -0,01/-0,025 -0,01/-0,025
      d 2 25 30 40 50 60 65 80 100
      Tolerance +0,022/+0,035 +0,022/+0,035 +0,026/+0,042 +0,026/+0,042 +0,032/+0.051 +0,032/+0.051 +0,032/+0.051 +0,037/+0,059
      d 6 21 26 36 45 55 60 75 95
      l 2 5 5 5 10 10 10 10 10
      l 3 5 5 5 10 10 10 10 10
      l 6 30 40 50 70 90 100 120 150
      m M8 M8 M8 M12 M12 M12 M12 M12
      l 1
      80 ●
      100 ● ●
      120 ● ● ●
      140 ● ●
      160 ● ● ●
      180 ● ● ●
      200 ● ● ●
      220 ●
      250 ● ● ● ●
      300 ● ● ● ● ●
      350 ● ● ● ●
      400 ● ●
      Ordering Code (example):
      Guide pillar with groove =2022.16.48.
      Guide diameter d 1 25 mm = 025.
      Length l 1 80 mm = 80
      Order No =2022.16.48. 025. 80
      2022.16.48. Guide pillar with groove
      subject to alterations
      Guide pillar with collar, to WDX
      Material:
      Steel, surface hardened
      Surface hardness: 60 + 4 HRC, Hardness penetration 1,5 + 1 mm
      Execution:
      precision ground
      from ∅ d 1 = 80 with 1 lifting thread M12
      Method of manufacturing entails that centre holes are not concentric
      with O.D.
      Note:
      The guide pillar is only recommended for use with solid lubricants.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Order No. for guide pillar with collar, to WDX, with screw clamps:
      2022.29.□□□.□□□.A
      Fixing:
      (to be ordered separately)
      Screw clamps with screws 2072.46 (M10 x 20 DIN EN ISO 4762)
      up to ∅ d 1 = 50 - 2 screw clamps
      from ∅ d 1 = 63 - 3 screw clamps
      20
      6
      d
      M10
      18
      l 3
      4
      10 6
      l
      -0,5 2
      l
      h6 2
      d
      M12
      f6

      15°
      1
      d
      1 -1
      r6 2
      d
      H7
      3
      d
      2022.29.
      Mounting example
      D60
      d 1 25 32 40 50 63 80 100
      d 2 25 32 40 50 63 80 100
      d 3 32 40 50 60 80 90 110
      d 6 68 75 83 93 106 123 143
      l 2 40 42 56 70 80 100 125
      l 3 6 8 8 10 10 10 10
      l 1
      125 ●
      140 ● ●
      160 ● ● ● ●
      180 ● ● ● ●
      200 ● ● ● ● ●
      224 ● ● ● ● ● ●
      250 ● ● ● ● ●
      280 ● ● ● ● ●
      315 ● ● ● ●
      355 ● ● ●
      400 ● ● ●
      500 ● ●
      Ordering Code (example):
      Guide pillar with collar, to WDX =2022.29.
      Guide diameter d 1 25 mm = 025.
      Length l 1 125 mm = 125
      Order No =2022.29. 025. 125
      2022.29. Guide pillar with collar, to WDX
      subject to alterations D61
      subject to alterations
      Guide pillar with collar, screw clamp retention, DIN 9825/~ISO 9182-5
      Description:
      Demountable pillars with shoulder are suited
      to applications where die sharpening requires
      dismantling and re-fitting.
      Material:
      Steel, (Core strength: ≥ 900 N/mm²) surface
      hardened
      Surface hardness: 60 + 3 HRC, Hardness pene-
      tration ≥ 1,8 mm
      Execution:
      fine precision ground
      Method of manufacturing entails that centre
      holes are not concentric with O.D.
      Note:
      The attachment is with 3 Screw clamp, from
      ∅ d 1 = 38 with 4 Screw clamp , which are
      included in delivery (Order No: 207.45 - Screw
      clamp incl. socket cap screw DIN 6912, Head
      ∅ 13).
      If the desired fixing is with centre retention
      2021.43. this is also possible (to be ordered
      separately).
      Bearing clearance / Preloading see pairing
      classification at the beginning of chapter D.
      Matching guide combinations, see selection
      matrix at the beginning of chapter D.
      Assembly guide lines / Dimensional require-
      ments and tolerances at the end of chapter D.
      Tolerance range:
      yellow = .10
      green = .20
      red = .30
      M8
      25
      20
      8
      6 20
      13
      a 1
      a
      6
      d
      7
      d
      2 l 1 l
      M6
      15
      12,5

      2
      d
      H5
      js4

      1
      d
      h3
      3
      d
      m
      2021.46.
      X
      2021.43.
      2021.46.
      Mounting example
      03.2017
      subject to alterations
      Guide pillar with collar, screw clamp retention, DIN 9825/~ISO 9182-5
      03.2017
      d 1 15 16 19 20 24 25 30 32 38 40 48 50 60 63 80
      d 2 15 16 19 20 24 25 30 32 38 40 48 50 60 63 80
      d 3 22 25 32 40 50 63 80 95
      d 6 33 36 43 51 61 74 91 106
      d 7 45.7 48.7 55.7 63.7 73.7 86.7 103.7 118.7
      a 15.9 16.6 18.4 20.4 29.2 33.8 39.8 46.2
      a 1 21.7 23 26 29.5 29.2 33.8 39.8 46.2
      m M8 M8 M8 M8 M8 M8 M8 M12
      l 2 20 23 30 37 37 47 47 60
      l 1
      100 ● ● ●
      112 ● ● ● ●
      125 ● ● ● ● ●
      140 ● ● ● ● ● ●
      160 ● ● ● ● ● ● ●
      180 ● ● ● ● ● ● ●
      200 ● ● ● ● ● ● ● ●
      224 ● ● ● ● ● ●
      250 ● ● ● ● ● ●
      280 ● ● ● ● ●
      315 ● ● ● ● ●
      355 ● ● ● ●
      400 ● ● ●
      Ordering Code (example):
      Guide pillar with collar, screw clamp retention, DIN 9825/~ISO 9182-5 =2021.46.
      Guide diameter d 1 32 mm = 032.
      Length l 1 315 mm= 315.
      Classification TOL yellow = 10
      Order No =2021.46. 032. 315.10
      2021.46. Guide pillar with collar, screw clamp retention, DIN 9825/~ISO 9182-5
      subject to alterations
      Guide pillar with collar and ball cage retainer
      Description:
      Demountable pillars with shoulder are suited
      to applications where die sharpening requires
      dismantling and re-fitting.
      Material:
      Steel, (Core strength: ≥ 900 N/mm²) surface
      hardened
      Surface hardness: 60 + 3 HRC, Hardness pene-
      tration ≥ 1,8 mm
      Execution:
      fine precision ground
      Note:
      The attachment is with 3 Screw clamp, from
      ∅ d 1 = 38 with 4 Screw clamp , which are
      included in delivery (Order No: 207.45 - Screw
      clamp incl. socket cap screw DIN 6912, Head
      ∅ 13).
      If the desired fixing is with centre retention
      2021.43. this is also possible (to be ordered
      separately).
      Bearing clearance / Preloading see pairing
      classification at the beginning of chapter D.
      Matching guide combinations, see selection
      matrix at the beginning of chapter D.
      Assembly guide lines / Dimensional require-
      ments and tolerances at the end of chapter D.
      Tolerance range:
      yellow = .10
      green = .20
      red = .30
      m
      12,5
      15
      6
      1 l
      1
      d
      2
      d
      js4
      8
      M6
      min.
      20
      5
      d
      9 l
      8 l
      4
      2 l
      13
      7
      d
      6
      d
      a
      1
      a
      2021.44.
      X
      2021.43
      Mounting example
      03.2017
      subject to alterations
      Guide pillar with collar and ball cage retainer
      03.2017
      d 1 38 40 48 50 60 63
      d 2 38 40 48 50 60 63
      d 3 50 50 63 63 80 80
      d 5 42 44 52 54 64 67
      d 6 61 61 74 74 91 91
      d 7 73.7 73.7 86.7 86.7 103.7 103.7
      a 29.2 29.2 33.8 33.8 39.8 39.8
      a 1 29.2 29.2 33.8 33.8 39.8 39.8
      m M8 M8 M8 M8 M8 M8
      l 2 37 37 47 47 47 47
      KG (l 8 / l 9 )
      1 (31 / 46) ● ● ● ● ● ●
      2 (41 / 56) ● ● ● ● ● ●
      3 (51 / 66) ● ● ● ● ● ●
      4 (61 / 76) ● ● ● ● ● ●
      5 (73 / 89) ● ● ● ● ● ●
      l 1
      125 ● ●
      140 ● ● ● ●
      160 ● ● ● ● ● ●
      180 ● ● ● ● ● ●
      200 ● ● ● ● ● ●
      224 ● ● ● ● ● ●
      250 ● ● ● ● ● ●
      280 ● ● ● ● ● ●
      315 ● ● ● ● ● ●
      355 ● ● ● ● ● ●
      400 ● ● ● ●
      Ordering Code (example):
      Guide pillar with collar and ball cage retainer =2021.44.
      Guide diameter d 1 48 mm = 048.
      Length l 1 400 mm = 400.
      Cage retainer size KG 1 = 1.
      Classification TOL yellow = 10
      Order No =2021.44. 048. 400. 1.10
      2021.44. Guide pillar with collar and ball cage retainer
      subject to alterations
      Retaining disc with screw
      Material:
      Retaining disc: Steel, burnished
      Countersunk head cap screw DIN 7991/ISO 10642
      Note:
      For fixing the guide pillars 2021.44., 2021.46. and 2021.29.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      m
      s
      5
      d
      2021.43.
      01.2017
      Order No Nominal-ø Pillar-ø d 5 s m
      2021.43.016 16 15/16 22 6 8
      2021.43.020 20 19/20 25 6 8
      2021.43.025 25 24/25 32 6 8
      2021.43.032 32 30/32 40 6 8
      2021.43.040 40 38/40 50 6 8
      2021.43.050 50 48/50 60 6 8
      2021.43.063 63 60/63 70 6 8
      2021.43.080 80 80 93 12 12
      2021.43. Retaining disc with screw
      subject to alterations
      Ball guide unit to Mercedes-Benz Standard
      ø23
      2
      d
      R6
      js4
      9
      d
      1
      d
      h3
      5
      d
      3
      d
      H5
      js4
      6
      d
      3x120°
      8
      3 l
      4 l
      6 l 2 l
      2025.94.
      Material:
      Demountable guide pillar: Steel, surface hardened
      Guide bush: Tooling steel
      Cage retainer: Steel
      Ball cage: Brass
      Execution:
      Ball guide unit 2025.94. consisting of: Demountable guide pillar, guide
      bush, ball cage, cage retainer, clamps and socket cap screws to
      DIN EN ISO 4762.
      D67
      Pillar diameter d 1 50 80
      d 2 50 80
      d 3 70 105
      d 5 80 118
      d 6 97 135
      d 9 57 91
      l 2 47 75
      l 3 316 450
      l 4 271 400
      l 6 128 160
      Ordering Code (example):
      Ball guide unit to Mercedes-Benz Standard =2025.94.
      Pillar diameter d 1 50 mm = 050
      Order No =2025.94. 050
      2025.94. Ball guide unit to Mercedes-Benz Standard
      subject to alterations
      Guide pillar with collar "ECO-LINE"
      13
      6
      8
      M
      a
      2
      d
      H5
      j6
      d 3
      1
      d
      h4
      6
      d
      7
      d
      a 1
      l 2 l 1
      2021.29.
      Material:
      Steel, surface hardened
      Surface hardness: 60 + 4 HRC, Hardness penetration 1,5 + 1 mm
      Execution:
      ground
      Method of manufacturing entails that centre holes are not concentric
      with O.D.
      Note:
      Guide pillars only recommended for use with sliding guides!
      The attachment is with 3 Screw clamp, from ∅ d 1 = 38 with 4 Screw
      clamp , which are included in delivery (Order No: 207.45 - Screw clamp
      incl. socket cap screw DIN 6912, Head ∅ 13).
      If the desired fixing is with centre retention 2021.43. this is also
      possible (to be ordered separately).
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      03.2017
      d 1 15 16 19 20 24 25 30 32 38 40 48 50 60 63 80
      d 2 15 16 19 20 24 25 30 32 38 40 48 50 60 63 80
      d 3 22 25 32 40 50 63 80 95
      d 6 33 36 43 51 61 74 91 106
      d 7 45.7 48.7 55.7 63.7 73.7 86.7 103.7 118.7
      a 15.9 16.6 18.4 20.4 29.2 33.8 39.8 46.2
      a 1 21.7 23 26 29.5 29.2 33.8 39.8 46.2
      M M8 M8 M8 M8 M8 M8 M8 M12
      l 2 20 23 30 37 37 47 47 60
      l 1
      100 ● ● ●
      112 ● ● ● ●
      125 ● ● ● ● ●
      140 ● ● ● ● ● ●
      160 ● ● ● ● ● ● ●
      180 ● ● ● ● ● ● ●
      200 ● ● ● ● ● ● ● ●
      224 ● ● ● ● ● ●
      250 ● ● ● ● ● ●
      280 ● ● ● ● ●
      315 ● ● ● ● ●
      355 ● ● ● ●
      400 ● ● ●
      Ordering Code (example):
      Guide pillar with collar "ECO-LINE" =2021.29.
      Guide diameter d 1 32 mm = 032.
      Length l 1 112 mm= 112
      Order No =2021.29. 032. 112
      2021.29. Guide pillar with collar "ECO-LINE"
      subject to alterations
      Guide pillar with collar
      +0,002
      2
      l l
      -0,02 1
      ( l )
      d 2
      d 3
      h3 1
      d
      h3 1
      R2
      20 35
      d
      R2
      202.61.
      Description:
      On small modular die sets the combination plastic ball cage 206.41./
      collared guide pillar 202.61. has indeed been successful for several
      years.
      Material:
      Steel, surface hardened
      Surface hardness: 60 + 4 HRC, Hardness penetration 1 ± 0,2 mm
      Execution:
      precision ground
      Note:
      For use with ball cage 206.41. and guide bushes 2062.44.012. or
      2061.44.15.
      D69
      Order No d 1 d 2 d 3 l l 1 l 2
      202.61.012.041.074 12 15.9 12.02 115 41 74
      202.61.015.044.080 15 23.5 15.02 124 44 80
      202.61. Guide pillar with collar
      subject to alterations
      Guide bush for ball bearing, for highest stroking speed
      Guide bush for ball bearing, ISO 9448-3
      Material:
      Tool steel, hardened 62 ± 2 HRC
      Execution:
      Bearing surfaces honed,
      outside diameter precision ground.
      Note:
      For use with ball cage 206.41. and guide pillar 202.61.
      Material:
      Tool steel, hardened 62 ± 2 HRC
      Execution:
      Bearing surfaces honed,
      outside diameter precision ground.
      Note:
      For use with ball cage 206.41. and guide pillar 202.61.
      Tolerance range:
      yellow = .10
      green = .20
      l 1
      3
      d
      d
      h4
      2 IT 3
      d
      1
      2062.44.012.
      l 1
      3
      d
      d
      h4
      2 IT 3
      d
      1
      2061.44.015.
      D70
      Order No d 1 d 2 d 3 l 1 for ball∅
      2062.44.012.016.032 12 16 20 32 2
      2062.44.012.017.032 12 17 20 32 2.5
      Order No d 1 d 2 d 3 l 1
      2061.44.015.023.10 15 21 28 23
      2061.44.015.023.20 15 21 28 23
      2061.44.015.030.10 15 21 28 30
      2061.44.015.030.20 15 21 28 30
      2061.44.015.037.10 15 21 28 37
      2061.44.015.037.20 15 21 28 37
      2061.44.015.047.10 15 21 28 47
      2061.44.015.047.20 15 21 28 47
      2061.44.015.060.10 15 21 28 60
      2061.44.015.060.20 15 21 28 60
      2062.44.012.
      2061.44. Guide bush for ball bearing,
      ISO 9448-3
      Guide bush for ball bearing,
      for highest stroking speed
      subject to alterations
      Ball cage, plastic, for highest stroking speed
      d
      k
      1 l
      1
      206.41.
      Description:
      Owing to its much lower inertia, the plastic ball cage of particular
      advantage in die sets operating at stroking speed of 1000 SPM and
      more.
      The phenomenon of ball-drag at the reversal point of cage travel, set up
      by the cage inertia, no longer occurs. The negative influence of this drag
      is eliminated – and so are the wear symptoms associated with it.
      On small modular die sets the combination plastic ball cage 206.41./
      collared guide pillar 202.61. has indeed been successful for several
      years.
      Material:
      Cage: Plastic tube (Polyacetal - POM)
      Balls: Steel hardened DIN 5401- Quality Class 1
      D71
      Order No d 1 l 1 k
      206.41.012.020.021 12 21 2
      206.41.012.020.042 12 42 2
      206.41.012.025.021 12 21 2.5
      206.41.012.025.042 12 42 2.5
      206.41.015.030.045 15 45 3
      206.41.015.030.056 15 56 3
      206.41.015.030.063 15 63 3
      206.41.015.030.071 15 71 3
      206.41. Ball cage, plastic, for highest
      stroking speed
      subject to alterations
      Demountable guide pillar with centre fixing
      Material:
      Steel, surface hardened
      Surface hardness: 62 + 2 HRC, Hardness penetration 1 ± 0,2 mm
      Execution:
      precision ground
      Note:
      For press fit into register bore N5.
      Bending equation see at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      L
      L L
      2 2
      l


      d 1 h3
      d 1 h3
      3 l 2 l
      1 l
      4 l 5 l 6 6 l
      js4 2
      d
      -0,2 5
      d
      2020.63.
      Mounting example
      D72
      Order No d 1 d 2 d 5 l 1 l 2 l 3 l 4 l 5 l 6
      2020.63.012.042.074 12 13 15.9 116 42 74 12.5 5 3
      2020.63.016.064.094 16 18 21.9 158 64 94 16 8 5
      2020.63. Demountable guide pillar with centre fixing
      subject to alterations D73
      subject to alterations
      Demountable guide pillar with centre fixing
      Material:
      Steel, (Core strength: ≥ 900 N/mm²) surface
      hardened
      Surface hardness: 60 + 3 HRC, Hardness pene-
      tration 2 + 1,6 mm
      Execution:
      precision ground
      Note:
      Use socket cap screws DIN EN ISO 4762 12.9.
      Bearing clearance / Preloading see pairing
      classification at the beginning of chapter D.
      Matching guide combinations, see selection
      matrix at the beginning of chapter D.
      Bending equation see at the beginning of
      chapter D.
      ∅ 12 only available in tolerance range yellow
      = .10
      Tolerance range:
      yellow = .10
      green = .20
      red = .30
      t
      js4 4
      d
      h3
      d 1
      6 l
      120° (3x)
      d 3
      6 l
      5 l 4 l
      3 l 2 l
      1


      d
      l
      l
      h3
      d 1
      6
      d
      7
      d
      2
      2020.62.
      X
      L
      L L
      2 2
      Mounting example
      01.2017
      subject to alterations
      Demountable guide pillar with centre fixing
      01.2017
      d 1 d 2 d 3 d 4 d 6 d 7 t l 1 l 2 l 3 l 4 l 5 l 6
      12 28 20 13 6 3.4 3.4 90 40 50 12 6 3
      12 28 20 13 6 3.4 3.4 100 40 60 12 6 3
      12 28 20 13 6 3.4 3.4 110 50 60 12 6 3
      12 28 20 13 6 3.4 3.4 120 50 70 12 6 3
      12 28 20 13 6 3.4 3.4 130 60 70 12 6 3
      12 28 20 13 6 3.4 3.4 140 70 70 12 6 3
      16 38 28 18 8 4.5 4.6 140 60 80 16 8 4
      16 38 28 18 8 4.5 4.6 150 60 90 16 8 4
      16 38 28 18 8 4.5 4.6 160 70 90 16 8 4
      16 38 28 18 8 4.5 4.6 170 70 100 16 8 4
      16 38 28 18 8 4.5 4.6 180 80 100 16 8 4
      16 38 28 18 8 4.5 4.6 190 90 100 16 8 4
      19 42 32 22 8 4.5 4.6 160 70 90 20 8 4
      19 42 32 22 8 4.5 4.6 170 70 100 20 8 4
      19 42 32 22 8 4.5 4.6 180 80 100 20 8 4
      19 42 32 22 8 4.5 4.6 190 80 110 20 8 4
      19 42 32 22 8 4.5 4.6 200 90 110 20 8 4
      19 42 32 22 8 4.5 4.6 210 100 110 20 8 4
      25 48 38 26 8 4.5 4.6 180 80 100 22 8 6
      25 48 38 26 8 4.5 4.6 190 80 110 22 8 6
      25 48 38 26 8 4.5 4.6 200 90 110 22 8 6
      25 48 38 26 8 4.5 4.6 210 90 120 22 8 6
      25 48 38 26 8 4.5 4.6 220 100 120 22 8 6
      25 48 38 26 8 4.5 4.6 230 110 120 22 8 6
      32 60 48 34 10 5.5 5.7 180 80 100 25 10 7
      32 60 48 34 10 5.5 5.7 190 80 110 25 10 7
      32 60 48 34 10 5.5 5.7 200 90 110 25 10 7
      32 60 48 34 10 5.5 5.7 210 90 120 25 10 7
      32 60 48 34 10 5.5 5.7 220 100 120 25 10 7
      32 60 48 34 10 5.5 5.7 230 100 130 25 10 7
      32 60 48 34 10 5.5 5.7 240 110 130 25 10 7
      32 60 48 34 10 5.5 5.7 250 110 140 25 10 7
      40 70 56 42 11 6.6 6.8 200 90 110 27 12 7
      40 70 56 42 11 6.6 6.8 210 90 120 27 12 7
      40 70 56 42 11 6.6 6.8 220 100 120 27 12 7
      40 70 56 42 11 6.6 6.8 230 100 130 27 12 7
      40 70 56 42 11 6.6 6.8 240 110 130 27 12 7
      40 70 56 42 11 6.6 6.8 250 110 140 27 12 7
      40 70 56 42 11 6.6 6.8 260 120 140 27 12 7
      Ordering Code (example):
      Demountable guide pillar with centre fixing =2020.62.
      Guide diameter d 1 25 mm = 025.
      Length with collar (short) l 2 80 mm = 080.
      Length up to collar (long) l 3 110 mm= 110.
      Classification TOL yellow = 10
      Order No =2020.62. 025. 080. 110.10
      2020.62. Demountable guide pillar with centre fixing
      subject to alterations
      Demountable guide pillar with centre fixing and ring nut
      Material:
      Steel, (Core strength: ≥ 900 N/mm²) surface hardened
      Surface hardness: 60 + 3 HRC, Hardness penetration ≥ 1,8 mm
      Execution:
      precision ground
      Note:
      Bearing clearance / Preloading see pairing classification at the begin-
      ning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Bending equation see at the beginning of chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Tolerance range:
      yellow = .10
      green = .20
      red = .30
      2 I 3 I
      5 I

      5 6 5
      h
      d 5
      h3 1
      d
      R3
      2
      3 js4
      d
      4 I
      d
      h3 1
      d
      d 4
      d 6
      202.60.
      Mounting example
      01.2017
      d 1 19 25 32 40
      d 2 32 38 46 56
      d 3 25 30 36 46
      d 4 M22 x 1.5 M28 x 1.5 M35 x 1.5 M45 x 1.5
      d 5 8 12 20 28
      d 6 40 50 55 68
      h 9 10 11 12
      l 2 80 80 100 100
      l 3 120 120 140 140
      l 4 29 29 34 34
      l 5 45 45 50 50
      Ordering Code (example):
      Demountable guide pillar with centre fixing and ring nut =202.60.
      Guide diameter d 1 32 mm = 032.
      Length with collar l 2 100 mm = 100.
      Length up to collar l 3 140 mm = 140.
      Classification TOL yellow = 10
      Order No =202.60. 032. 100. 140.10
      202.60 Demountable guide pillar with centre fixing and ring nut
      subject to alterations
      Demountable guide pillar with conical centre fixing
      12
      h3
      d 1
      R3
      h3
      d 1
      R3
      k
      120° (3x)
      4
      d
      R1
      (3x)
      DIN 74 - Km 6

      d 2
      d 3
      1x45°
      4
      l
      5
      l
      2
      l
      3
      l
      2020.64.
      2
      L L
      2
      L
      Material:
      Steel, hardened 62 ± 2 HRC
      Execution:
      precision ground
      Note:
      Matching retaining bush 2021.64.
      Use socket cap screws DIN EN ISO 4762 12.9.
      Bearing clearance / Preloading see pairing classification at the begin-
      ning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Bending equation see at the beginning of chapter D.
      Tolerance range:
      yellow = .10
      green = .20
      Mounting example
      D77
      d 1 25 25 32 32 32 32 32 32
      d 2 70 70 76 76 76 76 76 76
      d 3 55 55 62 62 62 62 62 62
      d 4 27.86 27.86 34.86 34.86 34.86 34.86 34.86 34.86
      k 26 26 30 30 30 30 30 30
      l 2 102 122 102 122 122 137 142 162
      l 3 143 143 143 143 153 153 153 153
      l 4 102 102 102 102 112 112 112 112
      l 5 41 41 41 41 41 41 41 41
      Ordering Code (example):
      Demountable guide pillar with conical centre fixing =2020.64.
      Guide diameter d 1 25 mm = 025.
      Length with collar (short) l 2 102 mm = 102.
      Length up to collar (long) l 3 143 mm = 143.
      Classification TOL yellow = 10
      Order No =2020.64. 025. 102.143.10
      2020.64. Demountable guide pillar with conical centre fixing
      subject to alterations
      Retaining bush for guide pillar conical 2020.64.
      Material:
      16 MnCr5
      Surface hardness: 60 ± 2 HRC, Hardness penetration 0,8–1 mm
      Execution:
      Thread not hardenend
      Fixing:
      2073.48.□□15 order separately.

      6 12
      51
      33,84
      45°
      n5
      d 3
      d 2
      d 1
      d 5
      d 6
      2021.64.
      Mounting example
      D78
      Order No D1xx d 2 d 3 d 5 d 6
      2021.64.025 25.5 M35x1,5 37 43 27.86
      2021.64.032 32.5 M40x1,5 44 50 34.86
      2021.64. Retaining bush for guide pillar conical 2020.64.
      subject to alterations
      Slotted nut DIN 1804
      h
      d 8
      d 2
      2073.48.
      Material:
      Steel, hardened
      Note:
      For fixing the retaining bush 2021.64.
      D79
      Order No d 2 d 8 h
      2073.48.35.15 M35x1,5 48 11
      2073.48.40.15 M40x1,5 54 12
      2073.48. Slotted nut DIN 1804
      subject to alterations
      Guide unit with collar MILLION GUIDE
      Description:
      FIBRO Million Guide guide units are used
      wherever rigidity, robustness and a precision
      guide function is required.
      The large supporting surface of the needle
      rollers ensures these properties.
      For stroke speeds up to 50 m/min and tempe-
      ratures up to 80°C.
      Material:
      Needle roller cage: Plastic
      Needle rollers: Steel, hardened
      Guide bush: Tool steel alloy, hardened,
      60 ± 2 HRC
      Guide pillar: Tool steel alloy, hardened,
      60 ± 2 HRC
      Disk: Steel
      Execution:
      Guide unit consisting of a paired guide pillar
      and guide bush, needle roller cage and disk for
      fixing the guide pillar. The fixing screw
      (2192.10./12.) is ordered separately as the
      screw required depends on the thickness of
      the base plate.
      Guide pillar and bushes are executed at:
      ∅ 16 with 4 running surfaces
      ∅ 12, ∅ 20 - ∅ 60 with 6 running surfaces
      ∅ 80 with 8 running surfaces
      Note:
      Guide unit must be installed in accordance
      with the instructions!
      Guide bush must be bonded!
      * Mounting bore
      Order No for spare part needle roller cage see
      table.
      m
      4
      d
      5
      d
      +1
      -0,5 2
      d
      -0,05 6
      d
      -0,01
      6
      d
      ±0,003
      3
      d
      -0,022 2
      d
      -0,018
      -0,06 2
      d
      -0,04
      -0,01 2
      d
      l 1 -0,3
      l 8 -0,1
      l 9 l 6
      l 3
      l 2 l 4
      l 5 +1
      l 7
      +0,08 6
      d
      +0,12
      1
      d
      *
      *
      2024.94.
      X
      guide piller guide sleeve
      needle rollers needle roller cage
      Cross section of guide unit
      D80
      subject to alterations
      Guide unit with collar MILLION GUIDE
      D81
      d 1 12 16 20 25 30 32 40 50 60 80
      d 2 12 16 20 25 30 32 40 50 60 80
      d 3 18 24 29 35 40 42 54 64 74 98
      d 4 16 22 26 32 38 40 50 60 72 105
      d 5 18 24 28 34 38 40 50 60 72 105
      d 6 23 30 37 44 50 54 68 78 95 120
      m M5x8 M6x10 M8x20 M8x20 M10x25 M10x25 M12x30 M12x30 M14x30 M16x30
      l 2 12 16 20 25 30 30 35 35 42 45
      l 3 6 6 8 8 8 8 8 8 15 15
      l 4 7 10 13 13 16 16 18 18 20 26
      l 5 3 4 5 5 7 7 9 9 12 13
      l 6 5 6 8 8 9 9 10 12 15 15
      l 7 29.8 30 52 62 68 68 78 82 116 132
      l 8 40 40 60 70 78 78 92 96 120 145
      l 9 0 0 20 20 20 20 20 20 20 25
      Order no.
      Needle roller cage
      2024.94.01 2 2024.94.01 6 2024.94.02 0 2024.94.02 5 2024.94.03 0 2024.94.05 0 2024.94.04 0 2024.94.05 0 2024.94.06 0 2024.94.08 0
      l 1
      50 ●
      60 ●
      70 ●
      80 ● ● ●
      90 ● ● ●
      100 ● ● ● ● ● ●
      110 ● ● ● ● ● ●
      120 ● ● ● ● ● ● ●
      130 ● ● ● ● ● ●
      140 ● ● ● ●
      150 ● ● ● ● ● ●
      160 ● ● ● ● ● ●
      170 ● ● ● ● ●
      180 ● ● ● ● ● ●
      190 ● ● ● ● ● ●
      200 ● ● ● ● ● ●
      210 ● ● ● ●
      220 ● ● ● ●
      230 ● ● ●
      240 ● ● ●
      250 ● ● ●
      260 ●
      270 ●
      280 ●
      Ordering Code (example):
      Guide unit with collar MILLION GUIDE =2024.94.
      Guide diameter d 1 12 mm = 012.
      Guide length l 1 50 mm = 050
      Order No =2024.94. 012.050
      2024.94. Guide unit with collar MILLION GUIDE
      subject to alterations
      Guide unit with center fixing MILLION GUIDE
      Description:
      FIBRO Million Guide guide units are used
      wherever rigidity, robustness and a precision
      guide function is required.
      The large supporting surface of the needle
      rollers ensures these properties.
      For stroke speeds up to 50 m/min and tempe-
      ratures up to 80°C.
      Material:
      Needle roller cages: Plastic
      Needle rollers: Steel, hardened
      Guide bushes: Tool steel alloy, hardened,
      60 ± 2 HRC
      Guide pillar: Tool steel alloy, hardened,
      60 ± 2 HRC
      Disk: Steel
      Execution:
      Guide unit consisting of a paired guide pillar,
      guide bushes and needle roller cages.
      Guide pillar and bushes are executed at:
      ∅ 16 with 4 running surfaces
      ∅ 12, ∅ 20 - ∅ 30 with 6 running surfaces
      Note:
      Guide unit must be installed in accordance
      with the instructions!
      Guide bushes must be bonded!
      * Mounting bore
      Order No for spare part needle roller cage see
      table.
      -0,025
      -0,015
      m
      1
      d
      1
      d
      -0,005 6
      d
      -0,05 6
      d
      -0,01
      -0,005 2
      d
      -0,05 2
      d
      3
      d
      l 3 -0,3 l 2 -0,3
      l 9
      l 8 -0,1
      l 9 l 6 l 4
      l 8 -0,1
      l 7 l 7
      2
      d
      +0,08 6
      d
      +0,12
      *
      *
      2024.96.
      X
      guide piller guide sleeve
      needle rollers needle roller cage
      Cross section of guide unit
      D82
      subject to alterations
      Guide unit with center fixing MILLION GUIDE
      D83
      d 1 12 16 20 25 30
      d 2 12.5 16.5 20.5 25.5 30.5
      d 3 19 23 27 32 37
      d 6 22 28 34 40 48
      m M5x8 M6x10 M8x20 M8x20 M8x20
      l 4 12 16 20 25 30
      l 6 4 5 5 5 5
      l 7 29.8 30 46 56 68
      l 8 30 40 50 60 70
      l 9 - - 20 20 20
      Order no.
      Needle roller cage
      2024.94.012 2024.94.016 2024.96.020 2024.96.025 2024.94.030
      l 3 l 2
      50 40 50 60
      60 40 50 60
      70 40 50 60 40 50 60
      80 40 50 60 70 40 50 60 70
      90 40 50 60 70 40 50 60 70 40 50 60 70 40 50 60 70
      100 40 50 60 70 40 50 60 70 40 50 60 70
      110 40 50 60 70 40 50 60 70
      Ordering Code (example):
      Guide unit with center fixing MILLION GUIDE =2024.96.
      Guide diameter d 1 12 mm = 012.
      Length up to collar l 3 50 mm = 050.
      Length with collar l 2 40 mm = 040
      Order No =2024.96. 012.050. 040
      2024.96. Guide unit with center fixing MILLION GUIDE
      subject to alterations
      Guide bearing with solid lubricant
      d 4
      1 t
      h 1
      h
      H7
      d 3
      d 1
      b
      e 2
      a
      e 1
      Guide Brush 2052.70.
      d 5
      2031.70.
      Material:
      Basic body: Special cast iron
      Guide bush 2052.70.: Bronze with solid lubricant, oilless lubricating
      Execution:
      Face and top machined.
      Note:
      Notes on sliding type guides at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Mounting example
      D84
      d 1 19 20 24 25 30 32 38 40 50 63 80
      d 3 45 50 65 80 96 110 130
      d 4 9 9 11 13.5 17.5 17.5 22
      a 85 90 115 130 160 180 215
      b 45 50 65 80 96 110 130
      e 1 64 68 83 95 118 132 160
      e 2 24 28 34 45 55 62 75
      h 18 22 25 30 35 35 40
      h 1 37 47 60 77 95 120 120
      t 1 3 3 3 3 4 4 10
      Ordering Code (example):
      Guide bearing with solid lubricant =2031.70.
      Guide diameter d 1 19 mm = 019
      Order No =2031.70. 019
      2031.70. Guide bearing with solid lubricant
      subject to alterations
      Retention bearing
      1
      h
      3
      d
      d 1 R6
      a
      h
      b
      2031.01.
      Material:
      Special cast iron
      Execution:
      Face and top machined. Hole fine bored to d 1 R6 fit.
      Note:
      Check squareness of pillars after press-fitting.
      Mounting example
      D85
      d 1 15 16 19 20 24 25 30 32 38 40 48 50 60 63 80
      d 3 35 45 50 65 80 96 110 130
      a 70 85 90 115 130 160 180 215
      b 35 45 50 65 80 96 110 130
      h 18 18 22 25 30 35 35 40
      h 1 30 37 47 60 77 95 120 120
      Ordering Code (example):
      Retention bearing =2031.01.
      Guide diameter d 1 15 mm= 015
      Order No =2031.01. 015
      2031.01. Retention bearing
      subject to alterations
      Guide bearing, sintered guide
      3
      d
      1
      d
      h
      1
      h
      a
      b
      2031.31.
      Material:
      Basic body: Special cast iron
      Guide bush 2051.32.: Sintered ferrite of high purity, carbonitrided, long-
      term lubrication
      Execution:
      Face and top machined. Bores honed.
      Note:
      Notes on sliding type guides at the beginning of chapter D.
      Bearing clearance see pairing classification at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Tolerance range:
      yellow = .10
      green = .20
      red = .30
      Mounting example
      D86
      d 1 15 16 19 20 24 25 30 32 38 40 48 50 60 63 80
      d 3 35 45 50 65 80 96 110 130
      a 70 85 90 115 130 160 180 215
      b 35 45 50 65 80 96 110 130
      h 18 18 22 25 30 35 35 40
      h 1 30 37 47 60 77 95 120 120
      Ordering Code (example):
      Guide bearing, sintered guide =2031.31.
      Guide diameter d 1 15 mm = 015.
      Classification TOL yellow = 10
      Order No =2031.31.015.10
      2031.31. Guide bearing, sintered guide
      subject to alterations
      Guide bearing for ball bearing guide
      l
      h 1
      1
      1
      d
      3
      d
      2
      d
      h
      a
      b
      2031.41.
      Material:
      Basic body: Special cast iron
      Guide bush 2061.44.: Tool steel, Hardness: 62 ± 2 HRC
      Execution:
      Face and top machined. Bores honed.
      Note:
      Notes on ball bearing type guides at the beginning of chapter D.
      Preloading see pairing classification at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Tolerance range:
      yellow = .10
      green = .20
      red = .30
      Mounting example
      D87
      d 1 15 16 19 20 24 25 30 32 38 40 48 50 60 63
      d 2 21 22 25 26 30 31 38 40 46 48 56 58 68 71
      d 3 35 45 50 65 80 96 110
      a 70 85 90 115 130 160 180
      b 35 45 50 65 80 96 110
      h 18 18 22 25 30 35 35
      h 1 30 37 47 60 77 95 120
      l 1 44 44 56 71 95 120 140
      l* 45 45 56 71 95 120 140
      *l = Nominal ordering length of ball cage - prefered length
      Ordering Code (example):
      Guide bearing for ball bearing guide =2031.41.
      Guide diameter d 1 15 mm = 015.
      Classification TOL yellow = 10
      Order No =2031.41.015.10
      2031.41. Guide bearing for ball bearing guide
      subject to alterations
      Retention bearing with screw holes
      1 t
      3
      d
      d 1 R6
      1
      h
      h
      4
      d
      b
      2
      e
      1
      e
      a
      5
      d
      2031.02.
      Material:
      Special cast iron
      Execution:
      Face and top machined. Hole fine bored to d 1 R6 fit.
      Note:
      Check squareness of pillars after press-fitting.
      Mounting example
      D88
      d 1 15 16 19 20 24 25 30 32 38 40 48 50 60 63 80
      d 3 35 45 50 65 80 96 110 130
      d 4 6.6 9 9 11 14 18 18 22
      d 5 11 15 15 18 20 26 26 33
      t 1 3 3 3 3 3 4 4 4
      a 70 85 90 115 130 160 180 215
      b 35 45 50 65 80 96 110 130
      e 1 53 64 68 83 95 118 132 160
      e 2 19 24 28 34 45 55 62 75
      h 18 18 22 25 30 35 35 40
      h 1 30 37 47 60 77 95 120 120
      Ordering Code (example):
      Retention bearing with screw holes =2031.02.
      Guide diameter d 1 15 mm= 015
      Order No =2031.02. 015
      2031.02. Retention bearing with screw holes
      subject to alterations
      Guide bearing with screw holes, sintered guide
      3
      d
      1
      d
      h
      1
      h
      a
      b
      4
      d
      1 t
      5
      d
      2031.34.
      1
      e
      2
      e
      Material:
      Basic body: Special cast iron
      Guide bush 2051.32.: Sintered ferrite of high purity, carbonitrided, long-
      term lubrication
      Execution:
      Face and top machined. Bores honed.
      Note:
      Notes on sliding type guides at the beginning of chapter D.
      Bearing clearance see pairing classification at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Tolerance range:
      yellow = .10
      green = .20
      red = .30
      Mounting example
      D89
      d 1 15 16 19 20 24 25 30 32 38 40 48 50 60 63 80
      d 3 35 45 50 65 80 96 110 130
      d 4 6.6 9 9 11 14 18 18 22
      d 5 11 15 15 18 20 26 26 33
      t 1 3 3 3 3 3 4 4 4
      a 70 85 90 115 130 160 180 215
      b 35 45 50 65 80 96 110 130
      e 1 53 64 68 83 95 118 132 160
      e 2 19 24 28 34 45 55 62 75
      h 18 18 22 25 30 35 35 40
      h 1 30 37 47 60 77 95 120 120
      Ordering Code (example):
      Guide bearing with screw holes, sintered guide =2031.34.
      Guide diameter d 1 15 mm = 015.
      Classification TOL yellow = 10
      Order No =2031.34. 015.10
      2031.34. Guide bearing with screw holes, sintered guide
      subject to alterations
      Guide bearing with screw holes, for ball bearing guide
      l
      h 1
      1
      1
      d
      3
      d
      2
      d
      h
      a
      b
      4
      d
      1 t
      5
      d
      2031.42.
      1
      e
      2
      e
      Material:
      Basic body: Special cast iron
      Guide bush 2061.44.: Tool steel, Hardness: 62 ± 2 HRC
      Execution:
      Face and top machined. Bores honed.
      Note:
      Notes on ball bearing type guides at the beginning of chapter D.
      Preloading see pairing classification at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Tolerance range:
      yellow = .10
      green = .20
      red = .30
      Mounting example
      D90
      d 1 15 16 19 20 24 25 30 32 38 40 48 50 60 63
      d 2 21 22 25 26 30 31 38 40 46 48 56 58 68 71
      d 3 35 45 50 65 80 96 110
      d 4 6.6 9 9 11 14 18 18
      d 5 11 15 15 18 20 26 26
      t 1 3 3 3 3 3 4 4
      a 70 85 90 115 130 160 180
      b 35 45 50 65 80 96 110
      e 1 53 64 68 83 95 118 132
      e 2 19 24 28 34 45 55 62
      h 18 18 22 25 30 35 35
      h 1 30 37 47 60 77 95 120
      l 1 44 44 56 70 95 120 140
      l* 45 45 56 71 95 120 140
      *l = Nominal ordering length of ball cage - prefered length
      Ordering Code (example):
      Guide bearing with screw holes, for ball bearing guide =2031.42.
      Guide diameter d 1 15 mm = 015.
      Classification TOL yellow = 10
      Order No =2031.42. 015.10
      2031.42. Guide bearing with screw holes, for ball bearing guide
      subject to alterations
      Retention bearing, low build height
      1
      e
      a
      b
      2
      e h
      1
      h
      4
      d
      d 3
      H5
      js4
      d 1
      R6
      2031.04.
      Material:
      Special cast iron
      Execution:
      Both faces machined to dims. h; O. D. d 3 turned.
      Hole fine bored to d 1 R6 - fit.
      Note:
      Check squareness of pillars after press-fitting.
      Mounting example
      D91
      d 1 15 16 19 20 24 25 30 32 38 40 48 50 60 63 80
      d 3 32 42 47 62 77 93 107 127
      d 4 7 9 9 11 14 18 18 22
      a 70 85 90 115 130 160 180 215
      b 35 45 50 65 80 96 110 130
      e 1 53 64 68 83 95 118 132 160
      e 2 19 24 28 34 45 55 62 75
      h 16 16 20 23 28 33 33 38
      h 1 30 37 47 60 77 95 120 120
      Ordering Code (example):
      Retention bearing, low build height =2031.04.
      Guide diameter d 1 15 mm= 015
      Order No =2031.04. 015
      2031.04. Retention bearing, low build height
      subject to alterations
      Guide bearing, low build height, sintered guide
      d 3
      H5
      js4
      h
      1
      d
      1
      h
      1
      e
      a
      b
      2
      e
      4
      d
      2031.38.
      Material:
      Basic body: Special cast iron
      Guide bush 2051.32.: Sintered ferrite of high purity, carbonitrided, long-
      term lubrication
      Execution:
      Both faces machined to dims. h; O. D. d 3 turned.
      Bores honed.
      Note:
      Notes on sliding type guides at the beginning of chapter D.
      Bearing clearance see pairing classification at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Tolerance range:
      yellow = .10
      green = .20
      red = .30
      Mounting example
      D92
      d 1 15 16 19 20 24 25 30 32 38 40 48 50 60 63 80
      d 3 32 42 47 62 77 93 107 127
      d 4 7 9 9 11 14 18 18 22
      a 70 85 90 115 130 160 180 215
      b 35 45 50 65 80 96 110 130
      e 1 53 64 68 83 95 118 132 160
      e 2 19 24 28 34 45 55 62 75
      h 16 16 20 23 28 33 33 38
      h 1 30 37 47 60 77 95 120 120
      Ordering Code (example):
      Guide bearing, low build height, sintered guide =2031.38.
      Guide diameter d 1 15 mm = 015.
      Classification TOL yellow = 10
      Order No =2031.38. 015.10
      2031.38. Guide bearing, low build height, sintered guide
      subject to alterations
      Guide bearing low build height, for ball bearing guide
      d 3
      H5
      js4
      l
      h
      1
      1
      h
      2
      d
      1
      d
      4
      d
      1
      e
      a
      b
      2
      e
      2031.44.
      Material:
      Basic body: Special cast iron
      Guide bush 2061.44.: Tool steel, Hardness: 62 ± 2 HRC
      Execution:
      Both faces machined to dims. h; O. D. d 3 turned.
      Bores honed.
      Note:
      Notes on ball bearing type guides at the beginning of chapter D.
      Preloading see pairing classification at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Tolerance range:
      yellow = .10
      green = .20
      red = .30
      Mounting example
      D93
      d 1 19 20 24 25 30 32 38 40 48 50
      d 2 25 26 30 31 38 40 46 48 56 58
      d 3 42 47 62 77 93 93
      d 4 9 9 11 14 18 18
      a 85 90 115 130 160 160
      b 45 50 65 80 96 96
      e 1 64 68 83 95 118 118
      e 2 24 28 34 45 55 55
      h 16 20 23 28 33 33
      h 1 37 47 60 77 95 95
      l 1 44 56 70 95 120 120
      l* 45 56 71 95 120 10
      *l = Nominal ordering length of ball cage - prefered length
      Ordering Code (example):
      Guide bearing low build height, for ball bearing guide =2031.44.
      Guide diameter d 1 19 mm = 019.
      Classification TOL yellow = 10
      Order No =2031.44. 019. 10
      2031.44. Guide bearing low build height, for ball bearing guide
      subject to alterations
      Guide bearing with headed guide bush with solid lubricant
      2072.45.
      H7
      H7
      2082.70.
      h
      e 1
      e
      a
      d 2
      d 1
      d 3
      l
      b
      1
      l 5
      h 1 +1
      ±2
      e 2
      d 6
      h 2
      d 7
      M
      2032.70.
      Material:
      Basic body: Steel, St 37
      Guide bush 2082.70.: Bronze with solid lubricant, oilless lubricating
      Execution:
      Face machined.
      Note:
      Notes on sliding type guides at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Mounting example
      D94
      Order No d 1 a b h H1 d 2 d 3 l 1 L5 d 6 d 7 h 2 e e 1 e 2 M
      2032.70.050 50 160 100 60 57 63 71 71 17 17.5 26 40 89 118 55 M6
      2032.70.063 63 180 125 70 67 80 90 80 19 17.5 26 50 123 132 62 M10
      2032.70.080 80 215 145 90 87 100 112 100 22 22 33 66 143 160 75 M10
      2032.70.100 100 230 170 110 107 125 140 125 21 22 33 86 168 168 110 M10
      2032.70.125 125 270 205 140 137 160 180 160 30 26 40 112 203 203 142 M10
      2032.70.160 160 315 250 180 177 200 220 200 32 26 40 152 243 243 170 M10
      2032.70. Guide bearing with headed guide bush with solid lubricant
      subject to alterations
      Retention bearing for guide pillars for large tools
      2032.02.
      h 2
      h 1
      H7
      e 1
      a
      d 1
      b
      e 2
      d 6
      d 7
      ±2
      Material:
      Steel, St 37
      Execution:
      Face machined. Hole fine bored to d 1 H7 fit.
      Note:
      For guide pillars with mounting diameter r6.
      Check squareness of pillars after press-fitting.
      Mounting example
      D95
      Order No d 1 a b h 1 d 6 d 7 h 2 e 1 e 2
      2032.02.050 50 160 100 70 17.5 26 40 118 55
      2032.02.063 63 180 125 80 17.5 26 50 132 62
      2032.02.080 80 215 145 100 22 33 66 160 75
      2032.02.100 100 230 170 125 22 33 86 168 110
      2032.02.125 125 270 205 140 26 40 112 203 142
      2032.02.160 160 315 250 180 26 40 152 243 170
      2032.02. Retention bearing for guide pillars for large tools
      subject to alterations
      Guide bush, sintered ferrite carbonitrided with long-term lubrication,
      ISO 9448-2
      Material:
      Sintered ferrite of high purity, carbonitrided, long-term lubrication
      Execution:
      Bearing surfaces and outside diameter precision ground.
      Slip-Fit Bonding:
      The position of the bearing is given by push fit holes tolerance H5. The
      adhesive (order no. 281.648) provides optimum push retention whilst
      offering the following advantages:
      - high accuracy and stiffness
      - no problems to find position when changing bushings
      We do not recommend to press fit for the same reasons mentioned
      above.
      Note:
      Notes on sliding type guides at the beginning of chapter D.
      *Bearing clearance see pairing classification at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      ∅ 8 - ∅ 12 not available in tolerance range red = .30.
      Tolerance range:
      yellow = .10
      green = .20
      red = .30
      l 1
      1
      3
      d
      H5
      js4
      d *
      2051.32.
      D96
      d 1 8 11 12 15 16 19 20 24 25 30 32 38 40 48 50 60 63 80
      d 3 13.7 22 28 32 40 48 58 70 85 95.7
      l 1
      15 ●
      23 ● ● ● ●
      30 ● ● ● ● ● ●
      37 ● ● ● ● ● ● ●
      47 ● ● ● ● ● ●
      60 ● ● ● ● ● ● ● ●
      77 ● ● ● ● ● ●
      95 ● ● ● ●
      110 ●
      120 ● ● ● ●
      Ordering Code (example):
      Guide bush, sintered ferrite carbonitrided with long-term lubrica-
      tion, ISO 9448-2 =2051.32.
      Guide diameter d 1 8 mm = 008.
      Length l 1 15 mm = 015.
      Classification TOL yellow = 10
      Order No =2051.32. 008. 015.10
      2051.32. Guide bush, sintered ferrite carbonitrided with long-term lubrication, ISO 9448-2
      subject to alterations
      Guide bush "ECO-LINE", bronzeplated, ISO 9448-2
      3
      d
      j6
      H6
      1
      d
      H5
      4
      d
      5
      d
      1
      l
      -0,5
      -0,2
      2 l
      = =
      2051.92.
      Material:
      Steel, d 3 induction hardened
      Execution:
      Bronze coated internal bore.
      Outside diameter fine-ground.
      Slip-Fit Bonding:
      The position of the bearing is given by push fit holes tolerance H5. The
      adhesive (order no. 281.648) provides optimum push retention whilst
      offering the following advantages:
      - high accuracy and stiffness
      - no problems to find position when changing bushings
      We do not recommend to press fit for the same reasons mentioned
      above.
      Note:
      Notes on sliding type guides at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      D97
      d 1 15 16 19 20 24 25 30 32 38 40 48 50 60 63 80
      d 3 28 32 40 48 58 70 85 105
      d 4 26 30 38 46 56 67 82 101
      d 5 4 4 4 4 4 5 5 8
      l 2 5 5 5 5 5 6 6 9
      l 1
      23 ● ● ●
      30 ● ● ● ● ●
      37 ● ● ● ● ● ●
      47 ● ● ● ● ● ●
      60 ● ● ● ● ● ● ●
      77 ● ● ● ● ● ●
      95 ● ● ● ●
      120 ● ● ● ●
      135 ●
      Ordering Code (example):
      Guide bush "ECO-LINE", bronzeplated, ISO 9448-2 =2051.92.
      Guide diameter d 1 15 mm = 015.
      Length l 1 23 mm = 023
      Order No =2051.92. 015.023
      2051.92. Guide bush "ECO-LINE", bronzeplated, ISO 9448-2
      subject to alterations
      Guide bush "ECO-LINE", Bronze with solid lubrication rings, ISO 9448-2
      Material:
      Bronze with solid lubricant, oilless lubricating
      Execution:
      Contact surface with solid lubricant rings.
      Outside diameter precision ground.
      Slip-Fit Bonding:
      The position of the bearing is given by push fit holes tolerance H5. The
      adhesive (order no. 281.648) provides optimum push retention whilst
      offering the following advantages:
      - high accuracy and stiffness
      - no problems to find position when changing bushings
      We do not recommend to press fit for the same reasons mentioned
      above.
      Note:
      Notes on sliding type guides at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      r
      r
      3
      d
      j6
      H6
      1
      d
      H6
      1
      l
      2051.72.
      D98
      d 1 15 16 19 20 24 25 30 32 38 40 48 50 60 63 80
      d 3 28 32 40 48 58 70 85 105
      r 2 2 2.5 2.5 3 3 3.5 4
      l 1
      23 ● ● ●
      30 ● ● ● ● ●
      37 ● ● ● ● ● ●
      47 ● ● ● ● ● ●
      60 ● ● ● ● ● ●
      77 ● ● ● ● ●
      95 ● ● ● ●
      120 ● ● ●
      135 ●
      Ordering Code (example):
      Guide bush "ECO-LINE", Bronze with solid lubrication rings, ISO 9448-2 =2051.72.
      Guide diameter d 1 15 mm = 015.
      Length l 1 23 mm = 023
      Order No =2051.72. 015.023
      2051.72. Guide bush "ECO-LINE", Bronze with solid lubrication rings, ISO 9448-2
      subject to alterations
      Guide bush for ball bearing, ISO 9448-3
      2061.44.
      1
      d
      3
      d
      H5
      js4
      1
      d
      2
      l
      l
      *
      Material:
      Tool steel, hardened 62 ± 2 HRC
      Execution:
      Bearing surfaces honed,
      outside diameter precision ground.
      Slip-Fit Bonding:
      The position of the bearing is given by push fit holes tolerance H5. The
      adhesive (order no. 281.648) provides optimum push retention whilst
      offering the following advantages:
      - high accuracy and stiffness
      - no problems to find position when changing bushings
      We do not recommend to press fit for the same reasons mentioned
      above.
      Note:
      Notes on ball bearing type guides at the beginning of chapter D.
      *Preloading see pairing classification at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      ∅ 8 - ∅ 12 not available in tolerance range red = .30.
      Tolerance range:
      yellow = .10; green = .20; red = .30
      D99
      d 1 8 10 11 12 15 16 19 20 24 25 30 32 38 40 48 50 60 63 80
      d 2 11 14 15 16 21 22 25 26 30 31 38 40 46 48 56 58 68 71 92
      d 3 18 22 22 22 28 28 32 32 40 40 48 48 58 58 70 70 85 85 105
      l 1 / l*
      30 / 40 ● ● ● ●
      23 / 40 ● ● ●
      37 / 40 ● ● ●
      23 / 45 ● ● ● ● ● ●
      30 / 45 ● ● ● ● ● ● ● ● ● ●
      37 / 45 ● ● ● ● ● ●
      47 / 56 ● ● ● ● ● ● ● ●
      60 / 71 ● ● ● ● ● ● ● ●
      77 / 95 ● ● ● ● ● ● ● ● ● ● ● ●
      37 / 50 ● ● ● ● ● ●
      95 / 120 ● ● ● ● ● ● ● ●
      47 / 63 ● ● ● ●
      60 / 80 ● ● ● ●
      120 / 140 ● ● ● ● ● ● ●
      60 / 95 ● ●
      *l = Nominal ordering length of ball cage - prefered length
      Ordering Code (example):
      Guide bush for ball bearing, ISO 9448-3 =2061.44.
      Guide diameter d 1 8 mm = 008.
      Installation length l 1 30 mm = 030.
      Classification TOL yellow = 10
      Order No =2061.44. 008. 030. 10
      2061.44. Guide bush for ball bearing, ISO 9448-3
      subject to alterations
      Guide bush for ball bearing, AFNOR
      Material:
      Tool steel, hardened 62 ± 2 HRC
      Execution:
      Bearing surfaces honed,
      outside diameter precision ground.
      Slip-Fit Bonding:
      The position of the bearing is given by push fit holes tolerance H6. The
      adhesive (order no. 281.648) provides optimum push retention whilst
      offering the following advantages:
      - high accuracy and stiffness
      - no problems to find position when changing bushings
      We do not recommend to press fit for the same reasons mentioned
      above.
      Note:
      Notes on ball bearing type guides at the beginning of chapter D.
      *Preloading see pairing classification at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Tolerance range:
      yellow = .10; green = .20; red = .30
      1
      d
      3
      d
      H6
      m5
      1
      d
      2
      l
      l
      *
      206.49.
      Mounting example
      D100
      d 1 16 20 25 32 40 50
      d 2 22 26 31 40 48 58
      d 3 28 32 40 50 63 80
      l 1 / l*
      35 / 45 ● ●
      40 / 45 ● ● ●
      50 / 56 ● ● ●
      60 / 71 ● ● ● ●
      70 / 80 ● ● ● ● ●
      80 / 95 ● ● ● ● ●
      90 / 95 ●
      45 / 56 ●
      90 / 105 ● ● ●
      100 / 120 ● ● ●
      55 / 63 ●
      120 / 140 ● ●
      *l = Nominal ordering length of ball cage - prefered length
      Ordering Code (example):
      Guide bush for ball bearing, AFNOR =206.49.
      Guide diameter d 1 16 mm = 016.
      Installation length l 1 35 mm = 035.
      Classification TOL yellow = 10
      Order No =206.49. 016. 035. 10
      206.49. Guide bush for ball bearing, AFNOR
      subject to alterations
      Guide bush for ball bearing, with stroke limitation
      2
      l
      stroke
      2
      1
      l
      *d
      3
      d
      H5
      1
      d
      2
      js4
      2061.47.
      Material:
      Tool steel, hardened 62 ± 2 HRC
      Execution:
      Bearing surfaces honed,
      outside diameter precision ground.
      Slip-Fit Bonding:
      The position of the bearing is given by push fit holes tolerance H5. The
      adhesive (order no. 281.648) provides optimum push retention whilst
      offering the following advantages:
      - high accuracy and stiffness
      - no problems to find position when changing bushings
      We do not recommend to press fit for the same reasons mentioned
      above.
      Note:
      Notes on ball bearing type guides at the beginning of chapter D.
      *Preloading see pairing classification at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Tolerance range:
      yellow = .10; green = .20; red = .30
      D101
      d 1 15 16 19 20 24 25 30 32 38 40 48 50 60 63
      d 2 21 22 25 26 30 31 38 40 46 48 56 58 68 71
      d 3 28 32 40 48 58 70 85
      l 1 / l 2 *
      60 / 44 ●
      77 / 44 ● ●
      95 / 50 ●
      120 / 65 ●
      120 / 80 ●
      120 / 95 ●
      *l 2 = Manufacturing length of ball cage
      Ordering Code (example):
      Guide bush for ball bearing, with stroke limitation =2061.47.
      Guide diameter d 1 15 mm = 015.
      Installation length l 1 60 mm = 060.
      Classification TOL yellow = 10
      Order No =2061.47. 015.060. 10
      2061.47. Guide bush for ball bearing, with stroke limitation
      subject to alterations
      Ball cage with circlip groove, Brass
      1
      d
      1
      l
      k
      n
      m
      206.71.
      Material:
      Cage: Brass
      Balls: Steel hardened (DIN 5401)
      Note:
      Ball cages from ø 10 has a groove for circlip to
      DIN 471.
      Notes on ball bearing type guides at the
      beginning of chapter D.
      Bearing life and dynamic load indexes see at
      the end of chapter D.
      l = Nominal ordering length
      l 1 = Manufacturing length
      D102
      d 1 20 16 24 25 19 8 10 11 12 30 32 15 38 40 48 50 60 63 80
      k 3 3 3 3 1.5 2 4 4 3 4 4 4 4 6
      n 1.6 1.6 1.6 1.6 - 1.1 2.1 2.1 1.6 2.1 2.1 2.1 2.1 3
      m 1.3 1.3 1.6 1.3 - 1.1 1.85 1.85 1.3 1.85 2.15 2.15 2.65 3.15
      l / l 1 Total number of balls
      24 / 24 80 64
      28 / 28 100 80
      31 / 32 120 120 120
      40 / 39 80 176
      40 / 40 160 120 120
      45 / 44 180 144 180 180 144
      45 / 45 140 140 168
      50 / 50 160 160 192 224 224
      56 / 55 180 180 216
      56 / 56 240 192 240 240 192
      56 / 57 272
      63 / 64 224 224
      63 / 65 264 308 308
      71 / 70 240 240
      71 / 72 320 256 320 320 256
      75 / 75 260
      80 / 80 360 360 360 280 280 336 392 392
      95 / 95 340 340 408 476 476 544
      95 / 96 440 440 440
      105 / 105 380 380 456 532 532 608
      120 / 119 540
      120 / 120 560 440 440 528 616 616 704
      128 / 128 616
      140 / 140 520 520 624 728 728 832 648
      160 / 160 600 600 720 840 840 960
      160 / 161 756
      180 / 180 816 952 952 1088
      180 / 182 864
      200 / 200 912 1064 1064 1216
      200 / 203 972
      240 / 238 1152
      240 / 240 1104 1288 1288 1472
      Ordering Code (example):
      Ball cage with circlip groove, Brass =206.71.
      Guide diameter d 1 8 mm = 008.
      Nominal ordering length of ball cage l 40 mm = 040
      Order No =206.71. 008. 040
      206.71. Ball cage with circlip groove, Brass
      subject to alterations
      Ball cage with circlip groove, Aluminium
      Material:
      Cage: Aluminium
      Balls: Steel hardened (DIN 5401)
      Note:
      Ball cages from ø 10 has a groove for circlip to
      DIN 471.
      Notes on ball bearing type guides at the
      beginning of chapter D.
      Bearing life and dynamic load indexes see at
      the end of chapter D.
      l = Nominal ordering length
      l 1 = Manufacturing length
      1
      d
      1
      l
      k
      n
      m
      2060.61.
      D103
      d 1 10 11 12 15 16 19 20 24 25 30 32 38 40 48 50 60 63 80
      k 2 2 3 3 3 3 3 4 4 4 4 6
      n 1.1 1.1 1.6 1.6 1.6 1.6 1.6 2.1 2.1 2.1 2.1 3
      m 1.1 1.1 1.3 1.3 1.3 1.3 1.6 1.85 1.85 2.15 2.65 3.15
      l / l 1 Total number of balls
      40 / 39 176 176
      56 / 57 272 272
      45 / 44 144 144 180 180 180
      56 / 56 192 192 240 240 240
      63 / 64 224 224
      71 / 72 256 256 320 320 320
      24 / 24 64 80
      28 / 28 80 100
      31 / 32 120 120 120
      80 / 80 360 360 360 280 336 392
      95 / 96 440 440 440
      40 / 40 160 120
      120 / 120 560 440 528 616 704
      45 / 45 140 168
      50 / 50 160 192 224
      56 / 55 180 216
      71 / 70 240
      95 / 95 340 408 476 544
      105 / 105 380 456 532 608
      140 / 140 520 624 728 832 648
      160 / 160 600 720 840 960
      63 / 65 264 308
      180 / 180 816 952 1088
      200 / 200 912 1064 1216
      240 / 240 1104 1288 1472
      120 / 119 540
      160 / 161 756
      180 / 182 864
      200 / 203 972
      240 / 238 1152
      Ordering Code (example):
      Ball cage with circlip groove, Aluminium =2060.61.
      Guide diameter d 1 10 mm = 010.
      Nominal ordering length of ball cage l 40 mm = 040
      Order No =2060.61. 010. 040
      2060.61. Ball cage with circlip groove, Aluminium
      subject to alterations
      Ball cage with assembly aid, Brass
      k
      1
      l
      206.73.
      Material:
      Cage: Brass
      Balls: Steel hardened (DIN 5401)
      Note:
      No assistant is needed for their assembly.
      These cages are equipped with a suitably posi-
      tioned brake ring insert. That ensures equal
      cage spacing especially on die sets with
      multiple pillars.
      Notes on ball bearing type guides at the
      beginning of chapter D.
      Bearing life and dynamic load indexes see at
      the end of chapter D.
      l = Nominal ordering length
      l 1 = Manufacturing length
      D104
      d 1 10 11 12 15 16 19 20 24 25 30 32 38 40 48 50 60 63 80
      k 2 2 3 3 3 3 3 4 4 4 4 6
      l / l 1 Total number of balls
      40 / 39 176 176
      56 / 57 272 272
      45 / 44 144 144 180 180 180
      56 / 56 192 192 240 240 240
      63 / 64 224 224
      71 / 72 256 256 320 320 320
      24 / 24 64 80
      28 / 28 80 100
      31 / 32 120 120 120
      80 / 80 360 360 360 280 336 392
      95 / 96 440 440 440
      40 / 40 160 120
      120 / 120 560 440 528 616 704
      45 / 45 140 168
      50 / 50 160 192 224
      56 / 55 180 216
      71 / 70 240
      95 / 95 340 408 476 544
      105 / 105 380 456 532 608
      140 / 140 520 624 728 832 648
      160 / 160 600 720 840 960
      63 / 65 264 308
      180 / 180 816 952 1088
      200 / 200 912 1064 1216
      240 / 240 1104 1288 1472
      120 / 119 540
      160 / 161 756
      180 / 182 864
      200 / 203 972
      240 / 238 1152
      Ordering Code (example):
      Ball cage with assembly aid, Brass =206.73.
      Guide diameter d 1 10 mm = 010.
      Nominal ordering length of ball cage l 40 mm = 040
      Order No =206.73. 010. 040
      206.73. Ball cage with assembly aid, Brass
      subject to alterations
      Ball cage with assembly aid, Aluminium
      Material:
      Cage: Aluminium
      Balls: Steel hardened (DIN 5401)
      Note:
      No assistant is needed for their assembly.
      These cages are equipped with a suitably posi-
      tioned brake ring insert. That ensures equal
      cage spacing especially on die sets with
      multiple pillars.
      Notes on ball bearing type guides at the
      beginning of chapter D.
      Bearing life and dynamic load indexes see at
      the end of chapter D.
      l = Nominal ordering length
      l 1 = Manufacturing length
      k
      1
      l
      2060.63.
      D105
      d 1 10 11 12 15 16 19 20 24 25 30 32 38 40 48 50 60 63 80
      k 2 2 3 3 3 3 3 4 4 4 4 6
      l / l 1 Total number of balls
      40 / 39 176 176
      56 / 57 272 272
      45 / 44 144 144 180 180 180
      56 / 56 192 192 240 240 240
      63 / 64 224 224
      71 / 72 256 256 320 320 320
      24 / 24 64 80
      28 / 28 80 100
      31 / 32 120 120 120
      80 / 80 360 360 360 280 336 392
      95 / 96 440 440 440
      40 / 40 160 120
      120 / 120 560 440 528 616 704
      45 / 45 140 168
      50 / 50 160 192 224
      56 / 55 180 216
      71 / 70 240
      95 / 95 340 408 476 544
      105 / 105 380 456 532 608
      140 / 140 520 624 728 832 648
      160 / 160 600 720 840 960
      63 / 65 264 308
      180 / 180 816 952 1088
      200 / 200 912 1064 1216
      240 / 240 1104 1288 1472
      120 / 119 540
      160 / 161 756
      180 / 182 864
      200 / 203 972
      240 / 238 1152
      Ordering Code (example):
      Ball cage with assembly aid, Aluminium =2060.63.
      Guide diameter d 1 10 mm = 010.
      Nominal ordering length of ball cage l 40 mm = 040
      Order No =2060.63. 010. 040
      2060.63. Ball cage with assembly aid, Aluminium
      subject to alterations
      Ball cage with circlip and fastening ring groove, Brass
      i
      d
      k
      s n
      2 Cage travel
      stroke
      2
      =
      2 l
      3
      1
      l
      1
      d
      l
      206.75.
      Material:
      Cage: Brass
      Balls: Steel hardened (DIN 5401)
      Note:
      Notes on ball bearing type guides at the
      beginning of chapter D.
      Bearing life and dynamic load indexes see at
      the end of chapter D.
      l = Nominal ordering length
      l 1 = Manufacturing length
      D106
      d 1 19 20 24 25 30 32 38 40 48 50 60 63
      d i x s 20 x 1 21 x 1 25 x 1.2 26 x 1.2 31 x 1.2 33 x 1.2 39 x 1.5 41 x 1.75 50 x 2 51 x 2 60 x 2 63 x 2
      k 3 3 3 3 4 4 4 4 4 4 4 4
      l 2 2.6 2.6 2.6 2.6 2.6 2.6 3.45 3.45 4.3 4.3 4.3 4.3
      n 1.3 1.3 1.3 1.3 1.3 1.3 1.85 1.6 2.15 2.15 2.15 2.15
      l / l 1 l 3
      56 / 56 31 31 31 31
      72 / 72 41 41 41 41
      80 / 80 51 51 51 51 51 51 51 51 51 51
      70 / 70 41 41
      95 / 95 61 61 61 61 61 61 61 61
      105 / 105 61 61 61 61
      120 / 120 73 73 73 73 73 73
      140 / 140 83 83
      Ordering Code (example):
      Ball cage with circlip and fastening ring groove, Brass =206.75.
      Guide diameter d 1 19 mm = 019.
      Nominal ordering length of ball cage l 56 mm = 056.
      Groove length l 3 31 mm = 031
      Order No =206.75. 019. 056. 031
      206.75. Ball cage with circlip and fastening ring groove, Brass
      subject to alterations
      Ball cage with circlip and fastening ring groove, Aluminium
      Material:
      Cage: Aluminium
      Balls: Steel hardened (DIN 5401)
      Note:
      Notes on ball bearing type guides at the
      beginning of chapter D.
      Bearing life and dynamic load indexes see at
      the end of chapter D.
      l = Nominal ordering length
      l 1 = Manufacturing length
      i
      d
      k
      s n
      2 Cage travel
      stroke
      2
      =
      2 l
      3
      1
      l
      1
      d
      l
      2060.65.
      D107
      d 1 19 20 24 25 30 32 38 40 48 50 60 63
      d i x s 20 x 1 21 x 1 25 x 1.2 26 x 1.2 31 x 1.2 33 x 1.2 39 x 1.5 41 x 1.75 50 x 2 51 x 2 60 x 2 63 x 2
      k 3 3 3 3 4 4 4 4 4 4 4 4
      l 2 2.6 2.6 2.6 2.6 2.6 2.6 3.45 3.45 4.3 4.3 4.3 4.3
      n 1.3 1.3 1.3 1.3 1.3 1.3 1.85 1.6 2.15 2.15 2.15 2.15
      l / l 1 l 3
      56 / 56 31 31 31 31
      72 / 72 41 41 41 41
      80 / 80 51 51 51 51 51 51 51 51 51 51
      70 / 70 41 41
      95 / 95 61 61 61 61 61 61 61 61
      105 / 105 61 61 61 61
      120 / 120 73 73 73 73 73 73
      140 / 140 83 83
      Ordering Code (example):
      Ball cage with circlip and fastening ring groove, Aluminium =2060.65.
      Guide diameter d 1 19 mm = 019.
      Nominal ordering length of ball cage l 56 mm = 056.
      Groove length l 3 31 mm = 031
      Order No =2060.65. 019. 056. 031
      2060.65. Ball cage with circlip and fastening ring groove, Aluminium
      subject to alterations
      Headed guide bush with ball cage retainer
      Material:
      Bush: Tool steel
      Hardness: 62 ± 2 HRC
      Cage: Brass
      Balls: Steel hardened (DIN 5401)
      Note:
      Ball cage position - please specify the required cage advance with order.
      FIBRO Ball Cage Retainers ensure optimum starting position of ball
      cages on inverted die sets - even if pillars retract from guide bushes. The
      application determines the cage advance. Note that cage travel is half
      the stroke length.
      In this context it is of importance to note the minimum constructional
      length.
      The cage advance should be chosen so that during normal operation of
      the tool, optimum position is achieved.
      The attachment is with 3 screw clamps, from ∅ d 1 = 38 with 4 screw
      clamps, which are included in delivery (Order No: 207.45 - screw clamp
      incl. socket cap screw DIN 6912, Head ∅ 13).
      *Preloading see pairing classification at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Price and delivery on request!
      Tolerance range:
      yellow = .10; green = .20; red = .30
      2081.67.
      2,5
      8,5
      8
      d
      4
      d
      6 6
      l
      4 6
      2
      l
      2
      *d
      3
      d
      H5
      js4
      1
      d
      X
      5
      d
      Cage
      advance
      3
      l
      1
      l
      a 1
      a
      7
      d
      6
      d
      13
      „ X ”
      D108
      d 1 19 20 24 25 30 32 38 40 48 50 60 63
      d 2 25 26 30 31 38 40 46 48 56 58 68 71
      d 3 32 40 48 58 70 85
      d 4 32 40 48 58 70 85
      d 5 40 48 56 66 80 95
      d 6 52 60 67 77 91 106
      d 7 64.7 72.7 79.7 89.7 103.7 118.7
      d 8 38.9 46 53 63 77 92
      l 1 59 79 93 108 127 150
      l 2 23 23 30 37 47 60
      l 3 36 56 63 71 80 90
      l 72 96 120 140 140 160
      a 20.7 22.65 24.4 35.3 40.2 45.5
      a 1 30 33.4 36.4 35.3 40.2 45.5
      Ordering Code (example):
      Headed guide bush with ball cage retainer =2081.67.
      Guide diameter d 1 19 mm = 019.
      Cage advance VL 5 mm = 005.
      Classification TOL yellow = 10
      Order No =2081.67. 019. 005. 10
      2081.67. Headed guide bush with ball cage retainer
      subject to alterations
      Headed guide bush with ball cage retainer
      2081.68.
      2,5
      8,5
      8
      d
      4
      d
      6 6
      l
      4 6
      2
      l
      2
      *d
      3
      d
      H5
      js4
      1
      d
      X
      5
      d
      Cage
      advance
      3
      l
      1
      l
      a 1
      a
      7
      d
      6
      d
      13
      „ X ”
      Material:
      Bush: Tool steel
      Hardness: 62 ± 2 HRC
      Cage: Aluminium
      Balls: Steel hardened (DIN 5401)
      Note:
      Ball cage position - please specify the required cage advance with order.
      FIBRO Ball Cage Retainers ensure optimum starting position of ball
      cages on inverted die sets - even if pillars retract from guide bushes. The
      application determines the cage advance. Note that cage travel is half
      the stroke length.
      In this context it is of importance to note the minimum constructional
      length.
      The cage advance should be chosen so that during normal operation of
      the tool, optimum position is achieved.
      The attachment is with 3 screw clamps, from ∅ d 1 = 38 with 4 screw
      clamps, which are included in delivery (Order No: 207.45 - screw clamp
      incl. socket cap screw DIN 6912, Head ∅ 13).
      *Preloading see pairing classification at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Price and delivery on request!
      Tolerance range:
      yellow = .10; green = .20; red = .30
      D109
      d 1 19 20 24 25 30 32 38 40 48 50 60 63
      d 2 25 26 30 31 38 40 46 48 56 58 68 71
      d 3 32 40 48 58 70 85
      d 4 32 40 48 58 70 85
      d 5 40 48 56 66 80 95
      d 6 52 60 67 77 91 106
      d 7 64.7 72.7 79.7 89.7 103.7 118.7
      d 8 38.9 46 53 63 77 92
      l 1 59 79 93 108 127 150
      l 2 23 23 30 37 47 60
      l 3 36 56 63 71 80 90
      l 72 96 120 140 140 160
      a 20.7 22.65 24.4 35.3 40.2 45.5
      a 1 30 33.4 36.4 35.3 40.2 45.5
      Ordering Code (example):
      Headed guide bush with ball cage retainer =2081.68.
      Guide diameter d 1 19 mm = 019.
      Cage advance VL 5 mm = 005.
      Classification TOL yellow = 10
      Order No =2081.68. 019. 005. 10
      2081.68. Headed guide bush with ball cage retainer
      subject to alterations
      Flanged guide bush with ball cage retainer
      Material:
      Bush: Tool steel
      Hardness: 62 ± 2 HRC
      Cage: Brass
      Balls: Steel hardened (DIN 5401)
      Note:
      Ball cage position - please specify the required cage advance with order.
      FIBRO Ball Cage Retainers ensure optimum starting position of ball
      cages on inverted die sets - even if pillars retract from guide bushes. The
      application determines the cage advance. Note that cage travel is half
      the stroke length.
      In this context it is of importance to note the minimum constructional
      length.
      The cage advance should be chosen so that during normal operation of
      the tool, optimum position is achieved.
      *Preloading see pairing classification at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Price and delivery on request!
      Tolerance range:
      yellow = .10
      green = .20
      red = .30
      5
      d
      k
      4
      d
      Cage advance
      l
      3
      l
      6
      d
      4 6
      1
      l
      2
      l
      2
      *d
      3
      d
      H5
      js4
      1
      d
      X
      „ X ”
      7
      d
      1
      t
      2091.67.
      D110
      d 1 19 20 24 25 30 32 38 40 48 50 60 63 80
      d 2 25 26 30 31 38 40 46 48 56 58 68 71 92
      d 3 32 40 48 58 70 85 105
      d 4 50 63 72 85 104 120 148
      d 5 40 50 58 70 86 100 125
      d 6 4.5 5.5 5.5 6.6 9 9 11
      d 7 8 10 10 11 15 15 18
      t 1 4.6 5.7 5.7 6.8 9 9 11
      k 18 23 28 33 38 46 56
      l 1 52 62 72 77 102 102 125
      l 2 37 37 47 47 60 60 75
      l 3 15 25 25 30 42 42 50
      l 72 72 80 95 105 120 140
      Ordering Code (example):
      Flanged guide bush with ball cage retainer =2091.67.
      Guide diameter d 1 19 mm = 019.
      Cage advance VL 5 mm = 005.
      Classification TOL yellow = 10
      Order No =2091.67. 019. 005. 10
      2091.67. Flanged guide bush with ball cage retainer
      subject to alterations
      Flanged guide bush with ball cage retainer
      5
      d
      k
      4
      d
      Cage advance
      l
      3
      l
      6
      d
      4 6
      1
      l
      2
      l
      2
      *d
      3
      d
      H5
      js4
      1
      d
      X
      „ X ”
      7
      d
      1
      t
      2091.68.
      Material:
      Bush: Tool steel
      Hardness: 62 ± 2 HRC
      Cage: Aluminium
      Balls: Steel hardened (DIN 5401)
      Note:
      Ball cage position - please specify the required cage advance with order.
      FIBRO Ball Cage Retainers ensure optimum starting position of ball
      cages on inverted die sets - even if pillars retract from guide bushes. The
      application determines the cage advance. Note that cage travel is half
      the stroke length.
      In this context it is of importance to note the minimum constructional
      length.
      The cage advance should be chosen so that during normal operation of
      the tool, optimum position is achieved.
      *Preloading see pairing classification at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Price and delivery on request!
      Tolerance range:
      yellow = .10
      green = .20
      red = .30
      D111
      d 1 19 20 24 25 30 32 38 40 48 50 60 63 80
      d 2 25 26 30 31 38 40 46 48 56 58 68 71 92
      d 3 32 40 48 58 70 85 105
      d 4 50 63 72 85 104 120 148
      d 5 40 50 58 70 86 100 125
      d 6 4.5 5.5 5.5 6.6 9 9 11
      d 7 8 10 10 11 15 15 18
      t 1 4.6 5.7 5.7 6.8 9 9 11
      k 18 23 28 33 38 46 56
      l 1 52 62 72 77 102 102 125
      l 2 37 37 47 47 60 60 75
      l 3 15 25 25 30 42 42 50
      l 72 72 80 95 105 120 140
      Ordering Code (example):
      Flanged guide bush with ball cage retainer =2091.68.
      Guide diameter d 1 19 mm = 019.
      Cage advance VL 5 mm = 005.
      Classification TOL yellow = 10
      Order No =2091.68. 019. 005. 10
      2091.68. Flanged guide bush with ball cage retainer
      subject to alterations
      Roller cage with circlip groove, Brass
      Description:
      Roller cages make linear contact with the guide bush and the guide
      pillar. This results in a load carrying capacity for each individual roller
      which is many times that of a ball of the same diameter. Roller bearings
      feature a FIBRO specific seal, similar to the ball bearings. The profile
      rollers are arranged in a spiral layout axially, so that every roller has its
      own path. The cages are grooved to accept a DIN 471 circlip.
      Material:
      Roller Cage: Brass
      Rollers: Steel hardened, 100 Cr6, DIN 5402
      Note:
      Preloading see at the beginning of Chapter D.
      For roller cages use only pairing class guide pillar red = .30 and
      guide sleeve yellow = .10.
      d 1
      1
      l
      Roller:
      hardened steel
      Guide pillar
      Guide bush
      Cage
      k
      2061.82.
      n
      D112
      d 1 19 20 24 25 30 32 38 40 48 50 63
      k 3 3 3 4 4 4 4
      n 1.6 1.6 1.6 2.1 2.1 2.1 2.1
      l 1 Total number of rollers
      45 32 32 40 48
      55 40 40 50 60 70
      65 48 48 60 72 84 108
      75 56 56 70 84 98 126 154
      85 64 64 80 96 112 144 176
      95 72 72 90 108 126 162 198
      105 80 80 100 120 140 180 220
      115 110 132 154 198 242
      125 120 144 168 216 264
      135 156 182 234 286
      145 168 196 252 308
      155 180 210 270 330
      165 192 224 288 352
      175 238 306 374
      185 252 324 396
      205 280 360 440
      Ordering Code (example):
      Roller cage with circlip groove, Brass =2061.82.
      Guide diameter d 1 19 mm = 019.
      Length l 1 45 mm = 045
      Order No =2061.82. 019. 045
      2061.82. Roller cage with circlip groove, Brass
      subject to alterations
      Circlip DIN 471
      s
      2
      d
      Installation
      space required
      206.72.
      n
      s
      1
      d
      a
      d
      Mounting example
      Description:
      For securing the ball and roller cages
      Execution:
      to DIN 471
      D113
      d 1 d a x s d 2 d 1 d a x s d 2
      10 13 x 1 20.2 30 37 x 1.5 49
      11 14 x 1 21.4 32 38 x 1.75 51.4
      12 15 x 1 22.6 38 45 x 1.75 59.1
      15 20 x 1.2 28.4 40 47 x 1.75 60.8
      16 21 x 1.2 29.6 48 55 x 2 70.2
      18 23 x 1.2 32.2 50 57 x 2 72.6
      19 24 x 1.2 33.2 60 67 x 2.5 83.1
      20 25 x 1.2 34.2 63 70 x 2.5 87
      24 29 x 1.5 39.1 80 90 x 3 108.5
      25 30 x 1.5 40.5
      Ordering Code (example):
      Circlip DIN 471 =206.72.
      Guide diameter d 1 10 mm= 010
      Order No =206.72. 010
      206.72. Circlip DIN 471
      subject to alterations
      Roller cage with assembly aid, Brass
      Description:
      Roller cages make linear contact with the guide bush and the guide
      pillar. This results in a load carrying capacity for each individual roller
      which is many times that of a ball of the same diameter. Roller bearings
      feature a FIBRO specific seal, similar to the ball bearings. The profile
      rollers are arranged in a spiral layout axially, so that every roller has its
      own path.
      Material:
      Roller Cage: Brass
      Rollers: Steel hardened, 100 Cr6, DIN 5402
      Note:
      No assistant is needed for their assembly. These cages are equipped
      with a suitably positioned brake ring insert. That ensures equal cage
      spacing especially on die sets with multiple pillars.
      Preloading see at the beginning of Chapter D.
      For roller cages use only pairing class guide pillar red = .30 and
      guide sleeve yellow = .10.
      Roller Cage
      hardened steel
      Guide Pillar
      Guide bush
      Cage
      k
      d 1
      1
      l
      2061.84.
      D114
      d 1 19 20 24 25 30 32 38 40 48 50 63
      k 3 3 3 4 4 4 4
      l 1 Total number of rollers
      45 32 32 40 48
      55 40 40 50 60 70
      65 48 48 60 72 84 108
      75 56 56 70 84 98 126 154
      85 64 64 80 96 112 144 176
      95 72 72 90 108 126 162 198
      105 80 80 100 120 140 180 220
      115 110 132 154 198 242
      125 120 144 168 216 264
      135 156 182 234 286
      145 168 196 252 308
      155 180 210 270 330
      165 192 224 288 352
      175 238 306 374
      185 252 324 396
      205 280 360 440
      Ordering Code (example):
      Roller cage with assembly aid, Brass =2061.84.
      Guide diameter d 1 19 mm = 019.
      Length l 1 45 mm = 045
      Order No =2061.84. 019. 045
      2061.84. Roller cage with assembly aid, Brass
      subject to alterations
      Headed guide bush, bronze coated, ISO 9448-6
      5
      d
      3
      d
      H5
      js4
      1
      d
      M8x1
      d
      4
      d
      8
      l 2
      3
      l
      6 6
      45°
      1
      l
      a
      1
      a
      6
      d
      7
      d
      „ X ”
      X
      2081.81.
      Material:
      1.0503
      ∅ d 3 and d 8 induction hardened to 500+100 HV 10.
      Execution:
      Bronze coated internal bore.
      Diameter d 3 and collar face precision ground.
      Note:
      The attachment is with 3 screw clamps, from ∅ d 1 = 38 with 4 screw
      clamps, which are included in delivery (Order No: 207.45 - screw clamp
      incl. socket cap screw DIN 6912, Head ∅ 13).
      Notes on sliding type guides at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Mounting example
      D115
      d 1 19 20 24 25 30 32 38 40 48 50 60 63 80
      Tolerance +0.003/+0.012 +0.003/+0.012 +0.004/+0.015 +0.004/+0.015 +0.004/+0.015 +0.005/+0.018 +0.005/+0.018
      d 3 32 40 48 58 70 85 105
      d 4 32 40 48 58 70 85 105
      d 5 40 48 56 66 80 95 118
      d 6 52 60 67 77 91 106 129
      d 7 64.7 72.7 79.7 89.7 103.7 118.7 141
      d 8 39 46 53 63 77 92 115
      a 20.9 22.7 24.4 35.3 40.2 45.5 54.5
      a 1 30.3 33.4 36.4 35.3 40.2 45.5 54.5
      l 1 59 79 93 108 127 150 150
      l 2 23 23 30 37 47 60 60
      l 3 36 56 63 71 80 90 90
      Ordering Code (example):
      Headed guide bush, bronze coated, ISO 9448-6 =2081.81.
      Guide diameter d 1 19 mm = 019
      Order No =2081.81. 019
      2081.81. Headed guide bush, bronze coated, ISO 9448-6
      subject to alterations
      Headed guide bush, bronze coated, ISO 9448-6
      Material:
      1.0503
      ∅ d 3 and d 8 induction hardened to 500+100 HV 10.
      Execution:
      Bronze coated internal bore.
      Diameter d 3 and collar face precision ground.
      Note:
      The attachment is with 3 screw clamps, from ∅ d 1 = 38 with 4 screw
      clamps, which are included in delivery (Order No: 207.45 - screw clamp
      incl. socket cap screw DIN 6912, Head ∅ 13).
      Notes on sliding type guides at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      a
      1
      a
      6
      d
      7
      d
      „ X ”
      5
      d
      3
      d
      H5
      js4
      3
      l
      M8x1
      d
      4
      d
      8
      l 2
      6 6
      1
      d
      45°
      X
      1
      l
      2081.84.
      Mounting example
      D116
      d 1 19 20 24 25 30 32 38 40 48 50 60 63 80
      Tolerance +0.003/+0.012 +0.003/+0.012 +0.004/+0.015 +0.004/+0.015 +0.004/+0.015 +0.005/+0.018 +0.005/+0.018
      d 3 32 40 48 58 70 85 105
      d 4 32 40 48 58 70 85 105
      d 5 40 48 56 66 80 95 118
      d 6 52 60 67 77 91 106 129
      d 7 65.7 72.7 79.7 89.7 103.7 118.7 141
      d 8 39 46 53 63 77 92 115
      a 20.9 22.7 24.4 35.3 40.2 45.5 54.5
      a 1 30.3 33.4 36.4 35.3 40.2 45.5 54.5
      l 1 43 59 75 82 97 116 120
      l 2 23 23 30 37 47 60 60
      l 3 20 36 45 45 50 56 60
      Ordering Code (example):
      Headed guide bush, bronze coated, ISO 9448-6 =2081.84.
      Guide diameter d 1 19 mm = 019
      Order No =2081.84. 019
      2081.84. Headed guide bush, bronze coated, ISO 9448-6
      subject to alterations
      Headed guide bush, bronze coated, ISO 9448-6
      a
      1
      a
      6
      d
      7
      d
      „ X ”
      1
      l
      3
      l
      d
      4
      d
      5
      3
      d
      H5
      js4
      1
      d
      M8x1
      l 2
      6
      X
      2081.85.
      Material:
      1.0503
      ∅ d 3 and d 8 induction hardened to 500+100 HV 10.
      Execution:
      Bronze coated internal bore.
      Diameter d 3 and collar face precision ground.
      Note:
      The attachment is with 3 screw clamps, from ∅ d 1 = 38 with 4 screw
      clamps, which are included in delivery (Order No: 207.45 - screw clamp
      incl. socket cap screw DIN 6912, Head ∅ 13).
      Notes on sliding type guides at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Mounting example
      D117
      d 1 19 20 24 25 30 32 38 40 48 50 60 63 80
      Tolerance +0.003/+0.012 +0.003/+0.012 +0.004/+0.015 +0.004/+0.015 +0.004/+0.015 +0.005/+0.018 +0.005/+0.018
      d 3 32 40 48 58 70 85 105
      d 4 32 40 48 58 70 85 105
      d 5 40 48 56 66 80 95 118
      d 6 52 60 67 77 91 106 129
      d 7 65.7 72.7 79.7 89.7 103.7 118.7 141
      a 20.9 22.7 24.4 35.3 40.2 45.5 54.4
      a 1 30.3 33.4 36.4 35.3 40.2 45.5 54.4
      l 1 35 35 42 52 65 80 80
      l 2 23 23 30 37 47 60 60
      l 3 12 12 12 15 18 20 20
      Ordering Code (example):
      Headed guide bush, bronze coated, ISO 9448-6 =2081.85.
      Guide diameter d 1 19 mm = 019
      Order No =2081.85. 019
      2081.85. Headed guide bush, bronze coated, ISO 9448-6
      subject to alterations
      Headed guide bush, sintered ferrite carbonitrided with long-term lubrica-
      tion, ISO 9448-6
      Material:
      Sintered ferrite of high purity, carbonitrided, long-term lubrication
      Execution:
      Bearing surfaces and outside diameter precision ground.
      Note:
      The attachment is with 3 screw clamps, from ∅ d 1 = 38 with 4 screw
      clamps, which are included in delivery (Order No: 207.45 - screw clamp
      incl. socket cap screw DIN 6912, Head ∅ 13).
      Notes on sliding type guides at the beginning of chapter D.
      *Bearing clearance see pairing classification at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Tolerance range:
      yellow = .10
      green = .20
      red = .30
      1
      l
      l 3
      2
      l
      6 6
      8
      d
      3
      d
      H5
      js4
      d *
      1
      5
      d
      13
      a
      1
      a
      6
      d
      7
      d
      „ X ”
      X
      d 4
      2081.31.
      Mounting example
      D118
      d 1 19 20 24 25 30 32 38 40 48 50 60 63
      d 3 32 40 48 58 70 85
      d 4 32 40 48 58 70 85
      d 5 40 48 56 66 80 95
      d 6 52 60 67 77 91 106
      d 7 64.7 72.7 79.7 89.7 103.7 118.7
      d 8 39 46 53 63 77 92
      a 20.7 22.65 24.4 35.3 40.2 45.5
      a 1 30 33.4 36.4 35.3 40.2 45.5
      l 1 59 79 93 108 127 150
      l 2 23 23 30 37 47 60
      l 3 36 56 63 71 80 90
      Ordering Code (example):
      Headed guide bush, sintered ferrite carbonitrided
      with long-term lubrication, ISO 9448-6 =2081.31.
      Guide diameter d 1 19 mm = 019.
      Classification TOL yellow = 10
      Order No =2081.31. 019. 10
      2081.31. Headed guide bush, sintered ferrite carbonitrided with long-term lubrication,
      ISO 9448-6
      subject to alterations
      Headed guide bush, sintered ferrite carbonitrided with long-term lubrica-
      tion, ISO 9448-6
      13
      a
      1
      a
      6
      d
      7
      d
      „ X ”
      X
      l 3
      2
      l
      1
      l
      6 6
      8
      d
      3
      d
      H5
      js4
      d *
      1
      5
      d
      d 4
      2081.32.
      Material:
      Sintered ferrite of high purity, carbonitrided, long-term lubrication
      Execution:
      Bearing surfaces and outside diameter precision ground.
      Note:
      The attachment is with 3 screw clamps, from ∅ d 1 = 38 with 4 screw
      clamps, which are included in delivery (Order No: 207.45 - screw clamp
      incl. socket cap screw DIN 6912, Head ∅ 13).
      Notes on sliding type guides at the beginning of chapter D.
      *Bearing clearance see pairing classification at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Tolerance range:
      yellow = .10
      green = .20
      red = .30
      Mounting example
      D119
      d 1 24 25 30 32 38 40 48 50
      d 3 40 48 58 70
      d 4 40 48 58 70
      d 5 48 56 66 80
      d 6 60 67 77 91
      d 7 72.7 79.7 89.7 103.7
      d 8 46 53 63 77
      a 22.65 24.4 35.3 40.2
      a 1 33.4 36.4 35.3 40.2
      l 1 80 93 110 131
      l 2 30 37 47 60
      l 3 50 56 63 71
      Ordering Code (example):
      Headed guide bush, sintered ferrite carbonitrided
      with long-term lubrication, ISO 9448-6 =2081.32.
      Guide diameter d 1 24 mm = 024.
      Classification TOL yellow = 10
      Order No =2081.32. 024. 10
      2081.32. Headed guide bush, sintered ferrite carbonitrided with long-term lubrication,
      ISO 9448-6
      subject to alterations
      Headed guide bush, sintered ferrite carbonitrided with long-term lubrica-
      tion, ISO 9448-6
      Material:
      Sintered ferrite of high purity, carbonitrided, long-term lubrication
      Execution:
      Bearing surfaces and outside diameter precision ground.
      Note:
      The attachment is with 3 screw clamps, from ∅ d 1 = 38 with 4 screw
      clamps, which are included in delivery (Order No: 207.45 - screw clamp
      incl. socket cap screw DIN 6912, Head ∅ 13).
      Notes on sliding type guides at the beginning of chapter D.
      *Bearing clearance see pairing classification at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Tolerance range:
      yellow = .10
      green = .20
      red = .30
      13
      a
      1
      a
      6
      d
      7
      d
      „ X ”
      X
      l 3
      2
      l
      1
      l
      6 6
      8
      d
      3
      d
      H5
      js4
      d *
      1
      5
      d
      d 4
      2081.33.
      Mounting example
      D120
      d 1 24 25 30 32 38 40 48 50
      d 3 40 48 58 70
      d 4 40 48 58 70
      d 5 48 56 66 80
      d 6 60 67 77 91
      d 7 72.7 79.7 89.7 103.7
      d 8 46 53 63 77
      a 22.65 24.4 35.3 40.2
      a 1 33.4 36.4 35.3 40.2
      l 1 55 69 79 96
      l 2 30 37 47 60
      l 3 25 32 32 36
      Ordering Code (example):
      Headed guide bush, sintered ferrite carbonitrided
      with long-term lubrication, ISO 9448-6 =2081.33.
      Guide diameter d 1 24 mm = 024.
      Classification TOL yellow = 10
      Order No =2081.33. 024. 10
      2081.33. Headed guide bush, sintered ferrite carbonitrided with long-term lubrication,
      ISO 9448-6
      subject to alterations
      Headed guide bush, sintered ferrite carbonitrided with long-term lubrica-
      tion, ISO 9448-6
      13
      a
      1
      a
      6
      d
      7
      d
      „ X ”
      X
      l 3
      2 l
      1
      l
      6 6
      8
      d
      3
      d
      H5
      js4
      d *
      1
      5
      d
      d 4
      2081.34.
      Material:
      Sintered ferrite of high purity, carbonitrided, long-term lubrication
      Execution:
      Bearing surfaces and outside diameter precision ground.
      Note:
      The attachment is with 3 screw clamps, from ∅ d 1 = 38 with 4 screw
      clamps, which are included in delivery (Order No: 207.45 - screw clamp
      incl. socket cap screw DIN 6912, Head ∅ 13).
      Notes on sliding type guides at the beginning of chapter D.
      *Bearing clearance see pairing classification at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Tolerance range:
      yellow = .10
      green = .20
      red = .30
      Mounting example
      D121
      d 1 19 20 24 25 30 32 38 40 48 50 60 63
      d 3 32 40 48 58 70 85
      d 4 32 40 48 58 70 85
      d 5 40 48 56 66 80 95
      d 6 52 60 67 77 91 106
      d 7 64.7 72.7 79.7 89.7 103.7 118.7
      d 8 39 46 53 63 77 92
      a 20.7 22.65 24.4 35.3 40.2 45.5
      a 1 30 33.4 36.4 35.3 40.2 45.5
      l 1 43 59 75 82 97 116
      l 2 23 23 30 37 47 60
      l 3 20 36 45 45 50 56
      Ordering Code (example):
      Headed guide bush, sintered ferrite carbonitrided
      with long-term lubrication, ISO 9448-6 =2081.34.
      Guide diameter d 1 19 mm = 019.
      Classification TOL yellow = 10
      Order No =2081.34. 019. 10
      2081.34. Headed guide bush, sintered ferrite carbonitrided with long-term lubrication,
      ISO 9448-6
      subject to alterations
      Headed guide bush, sintered ferrite carbonitrided with long-term lubrica-
      tion, ISO 9448-6
      Material:
      Sintered ferrite of high purity, carbonitrided, long-term lubrication
      Execution:
      Bearing surfaces and outside diameter precision ground.
      Note:
      The attachment is with 3 screw clamps, from ∅ d 1 = 38 with 4 screw
      clamps, which are included in delivery (Order No: 207.45 - screw clamp
      incl. socket cap screw DIN 6912, Head ∅ 13).
      Notes on sliding type guides at the beginning of chapter D.
      *Bearing clearance see pairing classification at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Tolerance range:
      yellow = .10
      green = .20
      red = .30
      13
      a
      1
      a
      6
      d
      7
      d
      „ X ”
      X
      2
      l l 3
      1
      l
      6
      4
      d
      3
      d
      H5
      js4
      d *
      1
      5
      d
      2081.35.
      Mounting example
      D122
      d 1 19 20 24 25 30 32 38 40 48 50 60 63
      d 3 32 40 48 58 70 85
      d 4 32 40 48 58 70 85
      d 5 40 48 56 66 80 95
      d 6 52 60 67 77 91 106
      d 7 64.7 72.7 79.7 89.7 103.7 118.7
      a 20.7 22.65 24.4 35.3 40.2 45.5
      a 1 30 33.4 36.4 35.3 40.2 45.5
      l 1 35 35 42 52 65 80
      l 2 23 23 30 37 47 60
      l 3 12 12 12 15 18 20
      Ordering Code (example):
      Headed guide bush, sintered ferrite carbonitrided
      with long-term lubrication, ISO 9448-6 =2081.35.
      Guide diameter d 1 19 mm = 019.
      Classification TOL yellow = 10
      Order No =2081.35. 019. 10
      2081.35. Headed guide bush, sintered ferrite carbonitrided with long-term lubrication,
      ISO 9448-6
      subject to alterations
      Headed guide bush "ECO-LINE", bronzeplated, ISO 9448-6
      a
      1
      a
      6
      d
      7
      d
      „ X ”
      5
      d
      3
      d
      H6
      j6
      1
      d
      M8x1
      d
      4
      d
      8
      l 2
      3
      l
      6 6
      45°
      1
      l
      H5
      X
      2081.91.
      Material:
      Steel, d 3 induction hardened
      Execution:
      Bronze coated internal bore.
      Outside diameter fine-ground.
      Note:
      The attachment is with 3 screw clamps, from ∅ d 1 = 38 with 4 screw
      clamps, which are included in delivery (Order No: 207.45 - screw clamp
      incl. socket cap screw DIN 6912, Head ∅ 13).
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Mounting example
      D123
      d 1 19 20 24 25 30 32 38 40 48 50 60 63 80
      d 3 32 40 48 58 70 85 105
      d 4 32 40 48 58 70 85 105
      d 5 40 48 56 66 80 95 118
      d 6 52 60 67 77 91 106 129
      d 7 64.7 72.7 79.7 89.7 103.7 118.7 141
      d 8 39 46 53 63 77 92 115
      a 20.7 22.7 24.4 35.3 40.2 45.5 54.5
      a 1 30.3 33.4 36.4 35.3 40.2 45.5 54.5
      l 1 59 79 93 108 127 150 150
      l 2 23 23 30 37 47 60 60
      l 3 36 56 63 71 80 90 90
      Ordering Code (example):
      Headed guide bush "ECO-LINE", bronzeplated, ISO 9448-6 =2081.91.
      Guide diameter d 1 19 mm = 019
      Order No =2081.91. 019
      2081.91. Headed guide bush "ECO-LINE", bronzeplated, ISO 9448-6
      subject to alterations
      Headed guide bush "ECO-LINE", bronzeplated, ISO 9448-6
      Material:
      Steel, d 3 induction hardened
      Execution:
      Bronze coated internal bore.
      Outside diameter fine-ground.
      Note:
      The attachment is with 3 screw clamps, from ∅ d 1 = 38 with 4 screw
      clamps, which are included in delivery (Order No: 207.45 - screw clamp
      incl. socket cap screw DIN 6912, Head ∅ 13).
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      a
      1
      a
      6
      d
      7
      d
      „ X ”
      5
      d
      3
      d
      H6
      j6
      3
      l
      M8x1
      d
      4
      d
      8
      l 2
      6 6
      45°
      X
      1
      l
      1
      d
      H5
      2081.94.
      Mounting example
      D124
      d 1 19 20 24 25 30 32 38 40 48 50 60 63 80
      d 3 32 40 48 58 70 85 105
      d 4 32 40 48 58 70 85 105
      d 5 40 48 56 66 80 95 118
      d 6 52 60 67 77 91 106 129
      d 7 64.7 72.7 79.7 89.7 103.7 118.7 141
      d 8 39 46 53 63 77 92 115
      a 20.7 22.7 24.4 35.3 40.2 45.5 54.5
      a 1 30.3 33.4 36.4 35.3 40.2 45.5 54.5
      l 1 43 59 75 82 97 116 120
      l 2 23 23 30 37 47 60 60
      l 3 20 36 45 45 50 56 60
      Ordering Code (example):
      Headed guide bush "ECO-LINE", bronzeplated, ISO 9448-6 =2081.94.
      Guide diameter d 1 19 mm = 019
      Order No =2081.94. 019
      2081.94. Headed guide bush "ECO-LINE", bronzeplated, ISO 9448-6
      subject to alterations
      Headed guide bush "ECO-LINE", bronzeplated, ISO 9448-6
      a
      1
      a
      6
      d
      7
      d
      „ X ”
      1
      l
      3
      l
      d
      4
      d
      5
      3
      d
      H6
      j6
      M8x1
      l 2
      6
      1
      d
      H5
      X
      2081.95.
      Material:
      Steel, d 3 induction hardened
      Execution:
      Bronze coated internal bore.
      Outside diameter fine-ground.
      Note:
      The attachment is with 3 screw clamps, from ∅ d 1 = 38 with 4 screw
      clamps, which are included in delivery (Order No: 207.45 - screw clamp
      incl. socket cap screw DIN 6912, Head ∅ 13).
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Mounting example
      D125
      d 1 19 20 24 25 30 32 38 40 48 50 60 63 80
      d 3 32 40 48 58 70 85 105
      d 4 32 40 48 58 70 85 105
      d 5 40 48 56 66 80 95 118
      d 6 52 60 67 77 91 106 129
      d 7 64.7 72.7 79.7 89.7 103.7 118.7 141
      a 20.7 22.65 24.4 35.3 40.2 45.5 54.4
      a 1 30 33.4 36.4 35.3 40.2 45.5 54.4
      l 1 35 35 42 52 65 80 80
      l 2 23 23 30 37 47 60 60
      l 3 12 12 12 15 18 20 20
      Ordering Code (example):
      Headed guide bush "ECO-LINE", bronzeplated, ISO 9448-6 = 2081.95.
      Guide diameter d 1 19 mm = 019
      Order No = 2081.95.019
      2081.95. Headed guide bush "ECO-LINE", bronzeplated, ISO 9448-6
      subject to alterations
      Headed guide bush "ECO-LINE", Bronze with solid lubricant rings,
      ISO 9448-6
      Material:
      Bronze with solid lubricant, oilless lubricating
      Execution:
      Contact surface with solid lubricant rings.
      Outside diameter precision ground.
      Note:
      The attachment is with 3 screw clamps, from ∅ d 1 = 38 with 4 screw
      clamps, which are included in delivery (Order No: 207.45 - screw clamp
      incl. socket cap screw DIN 6912, Head ∅ 13).
      Notes on sliding type guides at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      a
      1
      a
      6
      d
      7
      d
      „ X ”
      5
      d
      d
      4
      d
      8
      l 2
      3
      l
      6 6
      45°
      1
      l
      3
      d
      H6
      j6
      1
      d
      H6
      X
      2081.71.
      Mounting example
      D126
      d 1 19 20 24 25 30 32 38 40 48 50 60 63 80
      d 3 32 40 48 58 70 85 105
      d 4 32 40 48 58 70 85 105
      d 5 40 48 56 66 80 95 118
      d 6 52 60 67 77 91 106 129
      d 7 64.7 72.7 79.7 89.7 103.7 118.7 141
      d 8 39 46 53 63 77 92 115
      a 20.7 22.65 24.4 35.3 40.2 45.5 54.5
      a 1 30 33.4 36.4 35.3 40.2 45.5 54.5
      l 1 59 79 93 108 127 150 150
      l 2 23 23 30 37 47 60 60
      l 3 36 56 63 71 80 90 90
      Ordering Code (example):
      Headed guide bush "ECO-LINE", Bronze with solid lubricant rings,
      ISO 9448-6 =2081.71.
      Guide diameter d 1 19 mm = 019
      Order No =2081.71.019
      2081.71. Headed guide bush "ECO-LINE", Bronze with solid lubricant rings, ISO 9448-6
      subject to alterations
      Headed guide bush "ECO-LINE", Bronze with solid lubricant rings,
      ISO 9448-6
      a
      1
      a
      6
      d
      7
      d
      „ X ”
      5
      d
      3
      l
      d
      4
      d
      8
      l 2
      6 6
      45°
      X
      1
      l
      3
      d
      H6
      j6
      1
      d
      H6
      2081.74.
      Material:
      Bronze with solid lubricant, oilless lubricating
      Execution:
      Contact surface with solid lubricant rings.
      Outside diameter precision ground.
      Note:
      The attachment is with 3 screw clamps, from ∅ d 1 = 38 with 4 screw
      clamps, which are included in delivery (Order No: 207.45 - screw clamp
      incl. socket cap screw DIN 6912, Head ∅ 13).
      Notes on sliding type guides at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Mounting example
      D127
      d 1 19 20 24 25 30 32 38 40 48 50 60 63 80
      d 3 32 40 48 58 70 85 105
      d 4 32 40 48 58 70 85 105
      d 5 40 48 56 66 80 95 118
      d 6 52 60 67 77 91 106 129
      d 7 64.7 72.7 79.7 89.7 103.7 118.7 141
      d 8 39 46 53 63 77 92 115
      a 20.7 22.65 24.4 35.3 40.2 45.5 54.5
      a 1 30 33.4 36.4 35.3 40.2 45.5 54.5
      l 1 43 59 75 82 97 116 120
      l 2 23 23 30 37 47 60 60
      l 3 20 36 45 45 50 56 60
      Ordering Code (example):
      Headed guide bush "ECO-LINE", Bronze with solid lubricant rings,
      ISO 9448-6 =2081.74.
      Guide diameter d 1 19 mm = 019
      Order No =2081.74. 019
      2081.74. Headed guide bush "ECO-LINE", Bronze with solid lubricant rings, ISO 9448-6
      subject to alterations
      Headed guide bush "ECO-LINE", Bronze with solid lubricant rings,
      ISO 9448-6
      Material:
      Bronze with solid lubricant, oilless lubricating
      Execution:
      Contact surface with solid lubricant rings.
      Outside diameter precision ground.
      Note:
      The attachment is with 3 screw clamps, from ∅ d 1 = 38 with 4 screw
      clamps, which are included in delivery (Order No: 207.45 - screw clamp
      incl. socket cap screw DIN 6912, Head ∅ 13).
      Notes on sliding type guides at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      a
      1
      a
      6
      d
      7
      d
      „ X ”
      1
      l
      3
      l
      d
      4
      d
      5
      l 2
      6
      3
      d
      H6
      j6
      1
      d
      H6
      X
      2081.75.
      Mounting example
      D128
      d 1 19 20 24 25 30 32 38 40 48 50 60 63 80
      d 3 32 40 48 58 70 85 105
      d 4 32 40 48 58 70 85 105
      d 5 40 48 56 66 80 95 118
      d 6 52 60 67 77 91 106 129
      d 7 64.7 72.7 79.7 89.7 103.7 118.7 141
      a 20.7 22.65 24.4 35.3 40.2 45.5 54.4
      a 1 30 33.4 36.4 35.3 40.2 45.5 54.4
      l 1 35 35 42 52 65 80 80
      l 2 23 23 30 37 47 60 60
      l 3 12 12 12 15 18 20 20
      Ordering Code (example):
      Headed guide bush "ECO-LINE", Bronze with solid lubricant rings,
      ISO 9448-6 = 2081.75.
      Guide diameter d 1 19 mm = 19
      Order No = 2081.75.19
      2081.75. Headed guide bush "ECO-LINE", Bronze with solid lubricant rings, ISO 9448-6
      subject to alterations
      Headed guide bush for ball bearing, ISO 9448-7
      a
      a 1
      13
      7
      d
      6
      d
      „ X ”
      1
      l
      2
      l
      3
      l
      l
      8
      d
      2
      *d
      d
      H5
      js4
      1
      d
      3
      6 6
      5
      d
      d 4
      X
      2081.44.
      Material:
      Tool steel, hardened 62 ± 2 HRC
      Execution:
      Bearing surfaces honed,
      outside diameter precision ground.
      Note:
      The attachment is with 3 screw clamps, from ∅ d 1 = 38 with 4 screw
      clamps, which are included in delivery (Order No: 207.45 - screw clamp
      incl. socket cap screw DIN 6912, Head ∅ 13).
      Notes on ball bearing type guides at the beginning of chapter D.
      *Preloading see pairing classification at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Ball guide capacity calculations at the end of chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Tolerance range:
      yellow = .10
      green = .20
      red = .30
      Mounting example
      D129
      d 1 19 20 24 25 30 32 38 40 48 50 60 63 80
      d 2 25 26 30 31 38 40 46 48 56 58 68 71 92
      d 3 32 40 48 58 70 85 105
      d 4 32 40 48 58 70 85 105
      d 5 40 48 56 66 80 95 118
      d 6 52 60 67 77 91 106 129
      d 7 64.7 72.7 79.7 89.7 103.7 118.7 141.7
      d 8 39 46 53 63 77 92 115
      a 20.7 22.65 24.4 35.3 40.2 45.5 54.5
      a 1 30 33.4 36.4 35.3 40.2 45.5 54.5
      l 1 59 79 93 108 127 150 150
      l 2 23 23 30 37 47 60 60
      l 3 36 56 63 71 80 90 90
      l* 71 95 120 120 140 160 160
      *l = Nominal ordering length of ball cage - prefered length
      Ordering Code (example):
      Headed guide bush for ball bearing, ISO 9448-7 =2081.44.
      Guide diameter d 1 19 mm = 019.
      Classification TOL yellow = 10
      Order No =2081.44. 019. 10
      2081.44. Headed guide bush for ball bearing, ISO 9448-7
      subject to alterations
      Headed guide bush for ball bearing, ISO 9448-7
      Material:
      Tool steel, hardened 62 ± 2 HRC
      Execution:
      Bearing surfaces honed,
      outside diameter precision ground.
      Note:
      The attachment is with 3 screw clamps, from ∅ d 1 = 38 with 4 screw
      clamps, which are included in delivery (Order No: 207.45 - screw clamp
      incl. socket cap screw DIN 6912, Head ∅ 13).
      Notes on ball bearing type guides at the beginning of chapter D.
      *Preloading see pairing classification at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Ball guide capacity calculations at the end of chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Tolerance range:
      yellow = .10
      green = .20
      red = .30
      a
      a 1
      13
      7
      d
      6
      d
      „ X ”
      3
      l
      2
      l
      1
      l
      8
      d
      2
      *d
      d
      H5
      js4
      1
      d
      3
      6 6
      5
      d
      d 4
      X
      2081.45.
      l
      Mounting example
      D130
      d 1 24 25 30 32 38 40 48 50
      d 2 30 31 38 40 46 48 56 58
      d 3 40 48 58 70
      d 4 40 48 58 70
      d 5 48 56 66 80
      d 6 60 67 77 91
      d 7 72.7 79.7 89.7 103.7
      d 8 46 53 63 77
      a 22.65 24.4 35.3 40.2
      a 1 33.4 36.4 35.3 40.2
      l 1 80 93 110 131
      l 2 30 37 47 60
      l 3 50 56 63 71
      l* 95 120 140 160
      *l = Nominal ordering length of ball cage - prefered length
      Ordering Code (example):
      Headed guide bush for ball bearing, ISO 9448-7 =2081.45.
      Guide diameter d 1 24 mm = 024.
      Classification TOL yellow = 10
      Order No =2081.45. 024. 10
      2081.45. Headed guide bush for ball bearing, ISO 9448-7
      subject to alterations
      Headed guide bush for ball bearing, ISO 9448-7
      a
      a 1
      13
      7
      d
      6
      d
      „ X ”
      3
      l
      1
      l
      2
      l
      8
      d
      2
      *d
      d
      H5
      js4
      1
      d
      3
      6 6
      5
      d
      d 4
      X
      2081.46.
      l
      Material:
      Tool steel, hardened 62 ± 2 HRC
      Execution:
      Bearing surfaces honed,
      outside diameter precision ground.
      Note:
      The attachment is with 3 screw clamps, from ∅ d 1 = 38 with 4 screw
      clamps, which are included in delivery (Order No: 207.45 - screw clamp
      incl. socket cap screw DIN 6912, Head ∅ 13).
      Notes on ball bearing type guides at the beginning of chapter D.
      *Preloading see pairing classification at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Ball guide capacity calculations at the end of chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Tolerance range:
      yellow = .10
      green = .20
      red = .30
      Mounting example
      D131
      d 1 19 20 24 25 30 32 38 40 48 50 60 63 80
      d 2 25 26 30 31 38 40 46 48 56 58 68 71 92
      d 3 32 40 48 58 70 85 105
      d 4 32 40 48 58 70 85 105
      d 5 40 48 56 66 80 95 118
      d 6 52 60 67 77 91 106 129
      d 7 64.7 72.7 79.7 89.7 103.7 118.7 141.7
      d 8 39 46 53 63 77 92 115
      a 20.7 22.65 24.4 35.3 40.2 45.5 54.5
      a 1 30 33.4 36.4 35.3 40.2 45.5 54.5
      l 1 43 59 75 82 97 116 120
      l 2 23 23 30 37 47 60 60
      l 3 20 36 45 45 50 56 60
      l* 56 71 95 105 120 140 140
      *l = Nominal ordering length of ball cage - prefered length
      Ordering Code (example):
      Headed guide bush for ball bearing, ISO 9448-7 =2081.46.
      Guide diameter d 1 19 mm = 019.
      Classification TOL yellow = 10
      Order No =2081.46. 019. 10
      2081.46. Headed guide bush for ball bearing, ISO 9448-7
      subject to alterations
      Headed guide bush for ball bearing, ISO 9448-7
      Material:
      Tool steel, hardened 62 ± 2 HRC
      Execution:
      Bearing surfaces honed,
      outside diameter precision ground.
      Note:
      The attachment is with 3 screw clamps, from ∅ d 1 = 38 with 4 screw
      clamps, which are included in delivery (Order No: 207.45 - screw clamp
      incl. socket cap screw DIN 6912, Head ∅ 13).
      Notes on ball bearing type guides at the beginning of chapter D.
      *Preloading see pairing classification at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Ball guide capacity calculations at the end of chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Tolerance range:
      yellow = .10
      green = .20
      red = .30
      a
      a 1
      13
      7
      d
      6
      d
      „ X ”
      3
      l
      1
      l
      2
      l
      4
      d
      2
      *d
      d
      H5
      js4
      1
      d
      3
      6
      5
      d
      X
      2081.47.
      l
      Mounting example
      D132
      d 1 19 20 24 25 30 32 38 40 48 50 60 63 80
      d 2 25 26 30 31 38 40 46 48 56 58 68 71 92
      d 3 32 40 48 58 70 85 105
      d 4 32 40 48 58 70 85 105
      d 5 40 48 56 66 80 95 118
      d 6 52 60 67 77 91 106 129
      d 7 64.7 72.7 79.7 89.7 103.7 118.7 141.7
      a 20.7 22.65 24.4 35.3 40.2 45.5 54.5
      a 1 30 33.4 36.4 35.3 40.2 45.5 54.5
      l 1 35 35 42 52 65 80 80
      l 2 23 23 30 37 47 60 60
      l 3 12 12 12 15 18 20 20
      l* 45 45 56 63 80 95 120
      *l = Nominal ordering length of ball cage - prefered length
      Ordering Code (example):
      Headed guide bush for ball bearing, ISO 9448-7 =2081.47.
      Guide diameter d 1 19 mm = 019.
      Classification TOL yellow = 10
      Order No =2081.47. 019. 10
      2081.47. Headed guide bush for ball bearing, ISO 9448-7
      subject to alterations
      Headed guide bush for ball bearing, ISO 9448-7
      a
      a 1
      13
      7
      d
      6
      d
      „ X ”
      3
      l
      1
      l
      2
      l
      8
      d
      2
      *d
      d
      H5
      js4
      1
      d
      3
      6 6
      5
      d
      d 4
      X
      2081.49.
      l
      Material:
      Tool steel, hardened 62 ± 2 HRC
      Execution:
      Bearing surfaces honed,
      outside diameter precision ground.
      Note:
      The attachment is with 3 screw clamps, from ∅ d 1 = 38 with 4 screw
      clamps, which are included in delivery (Order No: 207.45 - screw clamp
      incl. socket cap screw DIN 6912, Head ∅ 13).
      Notes on ball bearing type guides at the beginning of chapter D.
      *Preloading see pairing classification at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Ball guide capacity calculations at the end of chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Tolerance range:
      yellow = .10
      green = .20
      red = .30
      Mounting example
      D133
      d 1 24 25 30 32 38 40 48 50
      d 2 30 31 38 40 46 48 56 58
      d 3 40 48 58 70
      d 4 40 48 58 70
      d 5 48 56 66 80
      d 6 60 67 77 91
      d 7 72.7 79.7 89.7 103.7
      d 8 46 53 63 77
      a 22.65 24.4 35.3 40.2
      a 1 33.4 36.4 35.3 40.2
      l 1 55 69 79 96
      l 2 30 37 47 60
      l 3 25 32 32 36
      l* 71 80 95 120
      *l = Nominal ordering length of ball cage - prefered length
      Ordering Code (example):
      Headed guide bush for ball bearing, ISO 9448-7 =2081.49.
      Guide diameter d 1 24 mm = 024.
      Classification TOL yellow = 10
      Order No =2081.49. 024. 10
      2081.49. Headed guide bush for ball bearing, ISO 9448-7
      subject to alterations
      Flanged guide bush, sintered ferrite carbonitrided with long-term lubrica-
      tion, ISO 9448-4
      Material:
      Sintered ferrite of high purity, carbonitrided, long-term lubrication
      Execution:
      Bearing surfaces and outside diameter precision ground.
      Note:
      The guide bush is fixed by means of 3 screws to DIN EN ISO 4762.
      The screws are not contained in the scope of delivery.
      Notes on sliding type guides at the beginning of chapter D.
      *Bearing clearance see pairing classification at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Tolerance range:
      yellow = .10
      green = .20
      red = .30
      k
      d 5
      d 4
      „ X ”
      t
      l 3
      1
      l
      2
      l
      d *
      d 3 H5
      js4
      1
      6
      d
      X
      7
      d
      2091.31.
      Mounting example
      D134
      d 1 19 20 24 25 30 32 38 40 48 50 60 63 80
      d 3 32 40 48 58 70 85 105
      d 4 50 63 72 85 104 120 148
      d 5 40 50 58 70 86 100 125
      d 6 4.5 5.5 5.5 6.6 9 9 11
      d 7 8 10 10 11 15 15 18
      k 18 23 28 33 38 46 56
      l 1 52 62 72 77 102 102 125
      l 2 37 37 47 47 60 60 75
      l 3 15 25 25 30 42 42 50
      t 4.6 5.7 5.7 6.8 9 9 11
      Ordering Code (example):
      Flanged guide bush, sintered ferrite carbonitrided
      with long-term lubrication, ISO 9448-4 =2091.31.
      Guide diameter d 1 19 mm = 019.
      Classification TOL yellow = 10
      Order No =2091.31. 019. 10
      2091.31. Flanged guide bush, sintered ferrite carbonitrided with long-term lubrication,
      ISO 9448-4
      subject to alterations
      Flanged guide bush, sintered ferrite carbonitrided with long-term lubrica-
      tion, ISO 9448-4
      k
      d 5
      d 4
      „ X ”
      l
      l
      3
      d
      H5
      js4
      d *
      1
      6
      d
      l 3
      1
      2
      t
      X
      7
      d
      2091.32.
      Material:
      Sintered ferrite of high purity, carbonitrided, long-term lubrication
      Execution:
      Bearing surfaces and outside diameter precision ground.
      Note:
      The guide bush is fixed by means of 3 srews up to ø 16: with screws to
      DIN 6912, from ø 19: with screws to DIN EN ISO 4762.
      The screws are not contained in the scope of delivery.
      Notes on sliding type guides at the beginning of chapter D.
      *Bearing clearance see pairing classification at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Tolerance range:
      yellow = .10
      green = .20
      red = .30
      Mounting example
      D135
      d 1 15 16 19 20 24 25 30 32 38 40 48 50 60 63
      d 3 28 32 40 48 58 70 85
      d 4 45 50 63 72 85 104 120
      d 5 35 40 50 58 70 86 100
      d 6 4.5 4.5 5.5 5.5 6.6 9 9
      d 7 8 8 10 10 11 15 15
      k 15 18 23 28 33 38 46
      l 1 36 45 55 62 67 89 89
      l 2 30 30 30 37 37 47 47
      l 3 6 15 25 25 30 42 42
      t 3.4 4.6 5.7 5.7 6.8 9 9
      Ordering Code (example):
      Flanged guide bush, sintered ferrite carbonitrided
      with long-term lubrication, ISO 9448-4 =2091.32.
      Guide diameter d 1 15 mm = 015.
      Classification TOL yellow = 10
      Order No =2091.32. 015.10
      2091.32. Flanged guide bush, sintered ferrite carbonitrided with long-term lubrication,
      ISO 9448-4
      subject to alterations
      Flanged guide bush, sintered ferrite carbonitrided with long-term lubrica-
      tion, ISO 9448-4
      Material:
      Sintered ferrite of high purity, carbonitrided, long-term lubrication
      Execution:
      Bearing surfaces and outside diameter precision ground.
      Note:
      The guide bush is fixed by means of 3 srews up to ø 16: with screws to
      DIN 6912, from ø 19: with screws to DIN EN ISO 4762.
      The screws are not contained in the scope of delivery.
      Notes on sliding type guides at the beginning of chapter D.
      *Bearing clearance see pairing classification at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Tolerance range:
      yellow = .10
      green = .20
      red = .30
      k
      d 5
      d 4
      „ X ”
      l 3
      l 1
      2
      l
      3
      d
      H5
      js4
      d *
      1
      6
      d
      t
      X
      7
      d
      2091.34.
      Mounting example
      D136
      d 1 15 16 19 20 24 25 30 32 38 40 48 50
      d 3 28 32 40 48 58 70
      d 4 45 50 63 72 85 104
      d 5 35 40 50 58 70 86
      d 6 4.5 4.5 5.5 5.5 6.6 9
      d 7 8 8 10 10 11 15
      k 15 18 23 28 33 38
      l 1 29 38 38 45 55 62
      l 2 23 23 23 30 30 37
      l 3 6 15 15 15 25 25
      t 3.4 4.6 5.7 5.7 6.8 9
      Ordering Code (example):
      Flanged guide bush, sintered ferrite carbonitrided
      with long-term lubrication, ISO 9448-4 =2091.34.
      Guide diameter d 1 15 mm = 015.
      Classification TOL yellow = 10
      Order No =2091.34. 015.10
      2091.34. Flanged guide bush, sintered ferrite carbonitrided with long-term lubrication,
      ISO 9448-4
      subject to alterations
      Flanged guide bush "ECO-LINE", bronzeplated, ISO 9448-4
      3x120°
      30°
      k
      7
      d
      t
      X
      4
      d
      3
      d
      j6
      H6
      1
      d
      H5
      2
      l
      1
      l
      6
      d
      „X“
      5
      d
      Grease nipple
      with thread
      DIN 3405 -A M8x1
      2091.91.
      Material:
      Steel, d 3 induction hardened
      Execution:
      Bronze coated internal bore.
      Outside diameter fine-ground.
      Note:
      The guide bush is fixed by means of 3 screws to DIN EN ISO 4762.
      The screws are not contained in the scope of delivery.
      Notes on sliding type guides at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Mounting example
      D137
      d 1 19 20 24 25 30 32 38 40 48 50 60 63 80
      d 3 32 40 48 58 70 85 105
      d 4 50 63 72 85 104 120 146
      d 5 40 50 58 70 86 100 125
      d 6 4.5 5.5 5.5 6.6 9 9 11
      d 7 8 10 10 11 15 15 18
      k 18 23 28 33 38 46 56
      l 1 52 62 72 77 102 102 125
      l 2 36 37 47 47 60 60 75
      t 4.6 5.7 5.7 6.8 9 9 11
      Ordering Code (example):
      Flanged guide bush "ECO-LINE", bronzeplated, ISO 9448-4 =2091.91.
      Guide diameter d 1 19 mm = 019
      Order No =2091.91. 019
      2091.91. Flanged guide bush "ECO-LINE", bronzeplated, ISO 9448-4
      subject to alterations
      Flanged guide bush "ECO-LINE", bronzeplated, ISO 9448-4
      Material:
      Steel, d 3 induction hardened
      Execution:
      Bronze coated internal bore.
      Outside diameter fine-ground.
      Note:
      The guide bush is fixed by means of 3 srews up to ø 16: with screws to
      DIN 6912, from ø 19: with screws to DIN EN ISO 4762.
      The screws are not contained in the scope of delivery.
      Notes on sliding type guides at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      5
      Grease nipple
      DIN 3405 -A M8x1
      with thread
      from d 1 = 19 mm
      3x120°
      30°
      k
      7
      d
      t
      X
      4
      d
      3
      d
      j6
      H6
      1
      d
      H5
      2
      l
      1
      l
      6
      d
      „X“
      5
      d
      ø26*
      2
      l /2
      ø4
      2091.92.
      Groove and
      lubrication hole
      by d 1 = 15/16 mm
      Mounting example
      D138
      d 1 15 16 19 20 24 25 30 32 38 40 48 50 60 63
      d 3 28 32 40 48 58 70 85
      d 4 45 50 63 72 85 104 120
      d 5 35 40 50 58 70 86 100
      d 6 4.5 4.5 5.5 5.5 6.6 9 9
      d 7 8 8 10 10 11 15 15
      k 15 18 23 28 33 38 46
      l 1 36 45 55 62 67 89 89
      l 2 30 30 30 37 37 47 47
      t 3.4 4.6 5.7 5.7 6.8 9 9
      Ordering Code (example):
      Flanged guide bush "ECO-LINE", bronzeplated, ISO 9448-4 =2091.92.
      Guide diameter d 1 15 mm= 015
      Order No =2091.92. 015
      2091.92. Flanged guide bush "ECO-LINE", bronzeplated, ISO 9448-4
      subject to alterations
      Flanged guide bush "ECO-LINE", bronzeplated, ISO 9448-4
      Groove and
      lubrication hole
      by d 1 = 15/16 mm
      5
      3x120°
      30°
      k
      7
      d
      t
      X
      4
      d
      3
      d
      j6
      H6
      1
      d
      H5
      2
      l
      1
      l
      6
      d
      „X“
      5
      d
      ø26*
      2
      l /2
      ø4
      2091.94.
      Grease nipple
      DIN 3405 -A M8x1
      with thread
      from d 1 = 19 mm
      Material:
      Steel, d 3 induction hardened
      Execution:
      Bronze coated internal bore.
      Outside diameter fine-ground.
      Note:
      The guide bush is fixed by means of 3 srews up to ø 16: with screws to
      DIN 6912, from ø 19: with screws to DIN EN ISO 4762.
      The screws are not contained in the scope of delivery.
      Notes on sliding type guides at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Mounting example
      D139
      d 1 15 16 19 20 24 25 30 32 38 40 48 50
      d 3 28 32 40 48 58 70
      d 4 45 50 63 72 85 104
      d 5 35 40 50 58 70 86
      d 6 4.5 4.5 5.5 5.5 6.6 9
      d 7 8 8 10 10 11 15
      k 15 18 23 28 33 38
      l 1 29 38 38 45 55 62
      l 2 23 23 23 30 30 37
      t 3.4 4.6 5.7 5.7 6.8 9
      Ordering Code (example):
      Flanged guide bush "ECO-LINE", bronzeplated, ISO 9448-4 =2091.94.
      Guide diameter d 1 15 mm= 015
      Order No =2091.94. 015
      2091.94. Flanged guide bush "ECO-LINE", bronzeplated, ISO 9448-4
      subject to alterations
      Flanged guide bush "ECO-LINE", Bronze with solid lubricant rings,
      ISO 9448-4
      Material:
      Bronze with solid lubricant, oilless lubricating
      Execution:
      Contact surface with solid lubricant rings.
      Outside diameter precision ground.
      Note:
      The guide bush is fixed by means of 3 screws to DIN EN ISO 4762.
      The screws are not contained in the scope of delivery.
      Notes on sliding type guides at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      t
      l 3
      1
      l
      2
      l
      6
      d
      3
      d
      H6
      j6
      d 1 H6
      7
      d
      k
      d 5
      d 4
      „ X ”
      X
      2091.71.
      Mounting example
      D140
      d 1 19 20 24 25 30 32 38 40 48 50 60 63 80
      d 3 32 40 48 58 70 85 105
      d 4 50 63 72 85 104 120 148
      d 5 40 50 58 70 86 100 125
      d 6 4.5 5.5 5.5 6.6 9 9 11
      d 7 8 10 10 11 15 15 18
      k 18 23 28 33 38 46 56
      l 1 52 62 72 77 102 102 125
      l 2 37 37 47 47 60 60 75
      l 3 15 25 25 30 42 42 50
      t 4.6 5.7 5.7 6.8 9 9 11
      Ordering Code (example):
      Flanged guide bush "ECO-LINE", Bronze with solid lubricant rings,
      ISO 9448-4 =2091.71.
      Guide diameter d 1 19 mm = 019
      Order No =2091.71.019
      2091.71. Flanged guide bush "ECO-LINE", Bronze with solid lubricant rings, ISO 9448-4
      subject to alterations
      Flanged guide bush "ECO-LINE", Bronze with solid lubricant rings,
      ISO 9448-4
      l
      l
      6
      d
      l 3
      1
      2
      t
      3
      d
      H6
      j6
      d 1 H6
      7
      d
      k
      d 5
      d 4
      „ X ”
      X
      2091.72.
      Material:
      Bronze with solid lubricant, oilless lubricating
      Execution:
      Contact surface with solid lubricant rings.
      Outside diameter precision ground.
      Note:
      The guide bush is fixed by means of 3 srews up to ø 16: with screws to
      DIN 6912, from ø 19: with screws to DIN EN ISO 4762.
      The screws are not contained in the scope of delivery.
      Notes on sliding type guides at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Mounting example
      D141
      d 1 15 16 19 20 24 25 30 32 38 40 48 50 60 63
      d 3 28 32 40 48 58 70 85
      d 4 45 50 63 72 85 104 120
      d 5 35 40 50 58 70 86 100
      d 6 4.5 4.5 5.5 5.5 6.6 9 9
      d 7 8 8 10 10 11 15 15
      k 15 18 23 28 33 38 46
      l 1 36 45 55 62 67 89 89
      l 2 30 30 30 37 37 47 47
      l 3 6 15 25 25 30 42 42
      t 3.4 4.6 5.7 5.7 6.8 9 9
      Ordering Code (example):
      Flanged guide bush "ECO-LINE", Bronze with solid lubricant rings,
      ISO 9448-4 =2091.72.
      Guide diameter d 1 15 mm= 015
      Order No =2091.72. 015
      2091.72. Flanged guide bush "ECO-LINE", Bronze with solid lubricant rings, ISO 9448-4
      subject to alterations
      Flanged guide bush "ECO-LINE", Bronze with solid lubricant rings,
      ISO 9448-4
      Material:
      Bronze with solid lubricant, oilless lubricating
      Execution:
      Contact surface with solid lubricant rings.
      Outside diameter precision ground.
      Note:
      The guide bush is fixed by means of 3 srews up to ø 16: with screws to
      DIN 6912, from ø 19: with screws to DIN EN ISO 4762.
      The screws are not contained in the scope of delivery.
      Notes on sliding type guides at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      k
      l 3
      l 1
      2
      l
      3
      d
      H6
      j6
      d 1
      6
      d
      t
      d 5
      d 4
      X
      „ X ”
      H6
      7
      d
      2091.74.
      Mounting example
      D142
      d 1 15 16 19 20 24 25 30 32 38 40 48 50
      d 3 28 32 40 48 58 70
      d 4 45 50 63 72 85 104
      d 5 35 40 50 58 70 86
      d 6 4.5 4.5 5.5 5.5 6.6 9
      d 7 8 8 10 10 11 15
      k 15 18 23 28 33 38
      l 1 29 38 38 45 55 62
      l 2 23 23 23 30 30 37
      l 3 6 15 15 15 25 25
      t 3.4 4.6 5.7 5.7 6.8 9
      Ordering Code (example):
      Flanged guide bush "ECO-LINE", Bronze with solid lubricant rings,
      ISO 9448-4 =2091.74.
      Guide diameter d 1 15 mm= 015
      Order No =2091.74. 015
      2091.74. Flanged guide bush "ECO-LINE", Bronze with solid lubricant rings, ISO 9448-4
      subject to alterations
      Flanged guide bush for ball bearing, ISO 9448-5
      k
      4
      d
      5
      d
      „ X ”
      6
      d
      t
      3
      l
      1
      l
      2
      l
      *d
      3
      d
      H5
      js4
      1
      d
      2
      X
      206.71.
      2060.61.
      7
      d
      2091.44.
      l
      Material:
      Tool steel, hardened 62 ± 2 HRC
      Execution:
      Bearing surfaces honed,
      outside diameter precision ground.
      Note:
      The guide bush is fixed by means of 3 screws to DIN EN ISO 4762.
      The screws are not contained in the scope of delivery.
      Notes on ball bearing type guides at the beginning of chapter D.
      *Preloading see pairing classification at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Ball guide capacity calculations at the end of chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Tolerance range:
      yellow = .10
      green = .20
      red = .30
      Mounting example
      D143
      d 1 19 20 24 25 30 32 38 40 48 50 60 63 80
      d 2 25 26 30 31 38 40 46 48 56 58 68 71 92
      d 3 32 40 48 58 70 85 105
      d 4 50 63 72 85 104 120 148
      d 5 40 50 58 70 86 100 125
      d 6 4.5 5.5 5.5 6.6 9 9 11
      d 7 8 10 10 11 15 15 18
      k 18 23 28 33 38 46 56
      l 1 52 62 72 77 102 102 125
      l 2 37 37 47 47 60 60 75
      l 3 15 25 25 30 42 42 50
      t 3.4 5.7 5.7 6.8 9 9 11
      l* 71 71 80 95 120 120 140
      *l = Nominal ordering length of ball cage - prefered length
      Ordering Code (example):
      Flanged guide bush for ball bearing, ISO 9448-5 =2091.44.
      Guide diameter d 1 19 mm = 019.
      Classification TOL yellow = 10
      Order No =2091.44. 019. 10
      2091.44. Flanged guide bush for ball bearing, ISO 9448-5
      subject to alterations
      Flanged guide bush for ball bearing, ISO 9448-5
      Material:
      Tool steel, hardened 62 ± 2 HRC
      Execution:
      Bearing surfaces honed,
      outside diameter precision ground.
      Note:
      The guide bush is fixed by means of 3 srews up to ø 16: with screws to
      DIN 6912, from ø 19: with screws to DIN EN ISO 4762.
      The screws are not contained in the scope of delivery.
      Notes on ball bearing type guides at the beginning of chapter D.
      *Preloading see pairing classification at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Ball guide capacity calculations at the end of chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Tolerance range:
      yellow = .10
      green = .20
      red = .30
      k
      4
      d
      5
      d
      „ X ”
      2
      l
      1
      l
      3
      l
      6
      d
      t
      *d
      3
      d
      H5
      js4
      1
      d
      2
      X
      206.71.
      2060.61.
      7
      d
      2091.45.
      l
      Mounting example
      D144
      d 1 15 16 19 20 24 25 30 32 38 40 48 50 60 63
      d 2 21 22 25 26 30 31 38 40 46 48 56 58 68 71
      d 3 28 32 40 48 58 70 85
      d 4 45 50 63 72 85 104 120
      d 5 35 40 50 58 70 86 100
      d 6 4.5 4.5 5.5 5.5 6.6 9 9
      d 7 8 8 10 10 11 15 15
      k 15 18 23 28 33 38 46
      l 1 36 45 55 62 67 89 89
      l 2 30 30 30 37 37 47 47
      l 3 6 15 25 25 30 42 42
      t 3.4 4.6 5.7 5.7 6.8 9 9
      l* 45 56 71 71 80 95 95
      *l = Nominal ordering length of ball cage - prefered length
      Ordering Code (example):
      Flanged guide bush for ball bearing, ISO 9448-5 =2091.45.
      Guide diameter d 1 15 mm = 015.
      Classification TOL yellow = 10
      Order No =2091.45. 015.10
      2091.45. Flanged guide bush for ball bearing, ISO 9448-5
      subject to alterations
      Flanged guide bush for ball bearing, ISO 9448-5
      k
      4
      d
      5
      d
      „ X ”
      3
      l
      2
      l
      1
      l
      6
      d
      t
      *d
      3
      d
      H5
      js4
      1
      d
      2
      X
      206.71.
      2060.61.
      7
      d
      2091.46.
      l
      Material:
      Tool steel, hardened 62 ± 2 HRC
      Execution:
      Bearing surfaces honed,
      outside diameter precision ground.
      Note:
      The guide bush is fixed by means of 3 srews up to ø 16: with screws to
      DIN 6912, from ø 19: with screws to DIN EN ISO 4762.
      The screws are not contained in the scope of delivery.
      Notes on ball bearing type guides at the beginning of chapter D.
      *Preloading see pairing classification at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Ball guide capacity calculations at the end of chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Tolerance range:
      yellow = .10
      green = .20
      red = .30
      Mounting example
      D145
      d 1 12 15 16 19 20 24 25 30 32 38 40 48 50
      d 2 16 21 22 25 26 30 31 38 40 46 48 56 58
      d 3 26 28 32 40 48 58 70
      d 4 43 45 50 63 72 85 104
      d 5 33 35 40 50 58 70 86
      d 6 4.5 4.5 4.5 5.5 5.5 6.6 9
      d 7 8 8 8 10 10 11 15
      k 13 15 18 23 28 33 38
      l 1 25 29 38 38 45 55 62
      l 2 16 23 23 23 30 30 37
      l 3 9 6 15 15 15 25 25
      t 4.6 3.4 4.6 5.7 5.7 6.8 9
      l* 40 45 45 45 56 63 80
      *l = Nominal ordering length of ball cage - prefered length
      Ordering Code (example):
      Flanged guide bush for ball bearing, ISO 9448-5 =2091.46.
      Guide diameter d 1 12 mm = 012.
      Classification TOL yellow = 10
      Order No =2091.46. 012.10
      2091.46. Flanged guide bush for ball bearing, ISO 9448-5
      subject to alterations
      Headed guide bush, sintered ferrite carbonitrided with long-term lubrica-
      tion, ~AFNOR
      Material:
      Sintered ferrite of high purity, carbonitrided, long-term lubrication
      Execution:
      Bearing surfaces and outside diameter precision ground.
      Note:
      The attachment is with 3 screw clamps, from ∅ d 1 = 38 with 4 screw
      clamps, which are included in delivery (Order No: 207.45 - screw clamp
      incl. socket cap screw DIN 6912, Head ∅ 13).
      Notes on sliding type guides at the beginning of chapter D.
      *Bearing clearance see pairing classification at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Tolerance range:
      yellow = .10
      green = .20
      red = .30
      13
      a
      1
      a
      6
      d
      7
      d
      „ X ”
      8,5
      6 6
      d *
      1
      5
      d
      3
      d
      H6
      k5
      3
      d
      H6
      f8
      8
      d
      l 3
      1
      l
      2
      l
      2,5
      d 4
      X
      210.31.
      Mounting example
      D146
      d 1 19 20 25 32 40 50
      d 3 32 40 50 63 80
      d 4 32 40 50 63 80
      d 5 36 45 56 70 90
      d 6 49 57 67 81 101
      d 7 61.7 69.7 79.7 93.7 113.7
      d 8 35 43.5 53 67 87
      a 19.9 21.9 24.4 36 43
      a 1 28.6 32.1 36.4 36 43
      l 1 66 70 83 98 120
      l 2 30 30 38 48 61
      l 3 36 40 45 50 59
      Ordering Code (example):
      Headed guide bush, sintered ferrite carbonitrided
      with long-term lubrication, ~AFNOR =210.31.
      Guide diameter d 1 19 mm = 019.
      Classification TOL yellow = 10
      Order No =210.31.019. 10
      210.31. Headed guide bush, sintered ferrite carbonitrided with long-term lubrication, ~AFNOR
      subject to alterations
      Headed guide bush, sintered ferrite carbonitrided with long-term lubrica-
      tion, ~AFNOR
      13
      a
      1
      a
      6
      d
      7
      d
      „ X ”
      l
      5
      d
      8
      d
      d *
      1
      3
      d
      H6
      k5
      3
      d
      H6
      f8
      l 3
      2
      l 1
      6 6
      8,5
      2,5
      d 4
      X
      210.34.
      Material:
      Sintered ferrite of high purity, carbonitrided, long-term lubrication
      Execution:
      Bearing surfaces and outside diameter precision ground.
      Note:
      The attachment is with 3 screw clamps, from ∅ d 1 = 38 with 4 screw
      clamps, which are included in delivery (Order No: 207.45 - screw clamp
      incl. socket cap screw DIN 6912, Head ∅ 13).
      Notes on sliding type guides at the beginning of chapter D.
      *Bearing clearance see pairing classification at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Tolerance range:
      yellow = .10
      green = .20
      red = .30
      Mounting example
      D147
      d 1 19 20 25 32 40 50
      d 3 32 40 50 63 80
      d 4 32 40 50 63 80
      d 5 36 45 56 70 90
      d 6 49 57 67 81 101
      d 7 61.7 69.7 79.7 93.7 113.7
      d 8 35 43.5 53 67 87
      a 19.9 21.9 24.4 36 43
      a 1 28.6 32.1 36.4 36 43
      l 1 42 50 63 76 96
      l 2 30 38 48 61 78
      l 3 12 12 15 15 18
      Ordering Code (example):
      Headed guide bush, sintered ferrite carbonitrided
      with long-term lubrication, ~AFNOR =210.34.
      Guide diameter d 1 19 mm = 019.
      Classification TOL yellow = 10
      Order No =210.34. 019. 10
      210.34. Headed guide bush, sintered ferrite carbonitrided with long-term lubrication, ~AFNOR
      subject to alterations
      Headed guide bush, sintered ferrite carbonitrided with long-term lubrica-
      tion, ~AFNOR
      Material:
      Sintered ferrite of high purity, carbonitrided, long-term lubrication
      Execution:
      Bearing surfaces and outside diameter precision ground.
      Note:
      The attachment is with 3 screw clamps, from ∅ d 1 = 38 with 4 screw
      clamps, which are included in delivery (Order No: 207.45 - screw clamp
      incl. socket cap screw DIN 6912, Head ∅ 13).
      Notes on sliding type guides at the beginning of chapter D.
      *Bearing clearance see pairing classification at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Tolerance range:
      yellow = .10
      green = .20
      red = .30
      13
      a
      1
      a
      6
      d
      7
      d
      „ X ”
      6
      5
      d
      d *
      1
      3
      d
      H6
      k5
      3
      d
      H6
      f8
      4
      d
      l l 3
      2
      l 1
      X
      8,5
      2,5
      210.35.
      Mounting example
      D148
      d 1 19 20 25 32 40 50
      d 3 32 40 50 63 80
      d 4 32 40 50 63 80
      d 5 36 45 56 70 90
      d 6 49 57 67 81 101
      d 7 61.7 69.7 79.7 93.7 113.7
      a 19.9 21.9 24.4 36 43
      a 1 28.6 32.1 36.4 36 43
      l 1 28 32 37 44 44
      l 2 16 20 25 32 32
      l 3 12 12 12 12 12
      Ordering Code (example):
      Headed guide bush, sintered ferrite carbonitrided
      with long-term lubrication, ~AFNOR =210.35.
      Guide diameter d 1 19 mm = 019.
      Classification TOL yellow = 10
      Order No =210.35. 019. 10
      210.35. Headed guide bush, sintered ferrite carbonitrided with long-term lubrication, ~AFNOR
      subject to alterations D149
      subject to alterations
      Headed guide bush for ball bearing, ~AFNOR
      Material:
      Tool steel, hardened 62 ± 2 HRC
      Execution:
      Bearing surfaces honed,
      outside diameter precision ground.
      Note:
      The attachment is with 3 screw clamps, from
      ∅ d 1 = 38 with 4 screw clamps, which are
      included in delivery (Order No: 207.45 - screw
      clamp incl. socket cap screw DIN 6912, Head
      ∅ 13).
      Notes on ball bearing type guides at the
      beginning of chapter D.
      *Preloading see pairing classification at the
      beginning of chapter D
      Matching guide combinations, see selection
      matrix at the beginning of chapter D.
      Ball guide capacity calculations at the end of
      chapter D.
      Assembly guide lines / Dimensional require-
      ments and tolerances at the end of chapter D.
      Tolerance range:
      yellow = .10
      green = .20
      red = .30
      4
      d
      8
      d
      2
      *d
      1
      d
      d
      H6
      k5 3
      d 5
      1 l
      l 3
      l
      2 l 6 6
      „ X ”
      a 1
      a
      6
      d
      7
      d
      13
      X
      210.44.
      X
      Mounting example
      D150
      subject to alterations
      Headed guide bush for ball bearing, ~AFNOR
      D151
      d 1 16 20 25 32 40 50 63
      d 2 22 26 31 40 48 58 71
      d 3 28 32 40 50 63 80 90
      d 4 29 32 40 50 63 80 90
      d 5 32 36 45 56 70 90 110
      d 6 45 49 57 67 81 101 121
      d 7 57.7 61.7 69.7 79.7 93.7 113.7 131.7
      d 8 31 35 43.5 53.5 67 87 107
      a 18.9 19.9 21.9 24.4 36 43 50.1
      a 1 26.9 28.6 32.1 36.4 36 43 50.1
      l 3 32 36 40 45 50 63 63
      l 2 * l 1 /l
      23 55/63 63/71 68/80
      30 62/71 66/71 70/80 75/80 80/95
      38 70/71 74/80 78/95 83/95 88/95 101/120
      48 88/100 93/105 98/105 111/120
      61 101/120 106/120 111/120 124/140
      78 123/120 128/140 141/160
      98 148/160 161/180 161/180
      123 186/200
      *l = Nominal ordering length of ball cage - prefered length
      Ordering Code (example):
      Headed guide bush for ball bearing, ~AFNOR =210.44.
      Guide diameter d 1 16 mm = 016.
      Installation length l 2 23 mm = 023.
      Classification TOL yellow = 10
      Order No =210.44. 016. 023. 10
      210.44. Headed guide bush for ball bearing, ~AFNOR
      subject to alterations
      Headed guide bush for ball bearing, ~AFNOR
      Material:
      Tool steel, hardened 62 ± 2 HRC
      Execution:
      Bearing surfaces honed, outside diameter
      fine-ground.
      Note:
      The attachment is with 3 screw clamps, from
      ∅ d 1 = 38 with 4 screw clamps, which are
      included in delivery (Order No: 207.45 - screw
      clamp incl. socket cap screw DIN 6912, Head
      ∅ 13).
      Notes on ball bearing type guides at the
      beginning of chapter D.
      *Preloading see pairing classification at the
      beginning of chapter D
      Matching guide combinations, see selection
      matrix at the beginning of chapter D.
      Ball guide capacity calculations at the end of
      chapter D.
      Assembly guide lines / Dimensional require-
      ments and tolerances at the end of chapter D.
      Tolerance range:
      yellow = .10
      green = .20
      red = .30
      „ X ”
      a 1
      a
      6
      d
      7
      d
      13
      X
      2 l
      1 l
      l 3
      l
      6
      4
      d
      2
      *d
      1
      d
      d
      H6
      k5 3
      d 5
      210.46.
      X
      Mounting example
      D152
      subject to alterations
      Headed guide bush for ball bearing, ~AFNOR
      D153
      d 1 16 20 25 32 40 50 63
      d 2 22 26 31 40 48 58 71
      d 3 28 32 40 50 63 80 90
      d 4 29 32 40 50 63 80 90
      d 5 32 36 45 56 70 90 110
      d 6 45 49 57 67 81 101 121
      d 7 57.7 61.7 69.7 79.7 93.7 113.7 131.7
      a 18.9 19.9 21.9 24.4 36 43 50.1
      a 1 26.9 28.6 32.1 36.4 36 43 50.1
      l 3 10 12 12 15 15 18 20
      l 2 * l 1 /l
      23 33/45
      30 40/45 42/45 42/45 45/56
      38 48/56 50/56 50/56 53/71
      48 58/63 60/71 60/71 63/71 63/80
      61 73/80 76/80 76/95 79/95
      78 90/105 93/105 93/105 96/405
      98 113/120 113/120 116/140 118/120
      123 143/160
      *l = Nominal ordering length of ball cage - prefered length
      Ordering Code (example):
      Headed guide bush for ball bearing, ~AFNOR =210.46.
      Guide diameter d 1 16 mm = 016.
      Installation length l 2 23 mm = 023.
      Classification TOL yellow = 10
      Order No =210.46. 016. 023. 10
      210.46. Headed guide bush for ball bearing, ~AFNOR
      subject to alterations
      Guide bush with collar, for ball bearing, ~AFNOR
      Material:
      Tool steel, hardened 62 ± 2 HRC
      Execution:
      Bearing surfaces honed,
      outside diameter precision ground.
      Note:
      The guide bush is fixed with slotted nut 207.48.
      Notes on ball bearing type guides at the beginning of chapter D.
      *Preloading see pairing classification at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Ball guide capacity calculations at the end of chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Tolerance range:
      yellow = .10
      green = .20
      red = .30
      h
      l
      M
      1
      d
      2
      *d
      4
      d
      H6
      k5 3
      d
      1
      l
      3
      l
      4
      l
      2
      l
      +2
      210.45.
      6
      d
      Mounting example
      D154
      d 1 16 16 20 20 20 25 25 25 32 32 32 40 40 40 50 50
      d 2 22 22 26 26 26 31 31 31 40 40 40 48 48 48 58 58
      d 3 28 28 32 32 32 40 40 40 50 50 50 63 63 63 80 80
      d 4 32 32 36 36 36 45 45 45 56 56 56 70 70 70 90 90
      d 6 40 40 44 44 44 55 55 55 65 65 65 81 81 81 100 100
      M M27x1 M27x1 M30x1 M30x1 M30x1 M39x1 M39x1 M39x1 M48x1 M48x1 M48x1 M60x1 M60x1 M60x1 M76x1 M76x1
      h 3 3 4 4 4 4 4 4 5 5 5 6 6 6 8 8
      l 1 16 20 17 21 25 22 26 31 26 31 38 32 39 47 41 49
      l 2 8 12 8 12 16 12 16 21 15 20 27 20 27 35 26 34
      l 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 5 5
      l 4 5 5 6 6 6 7 7 7 7 7 7 8 8 8 10 10
      l* 24 28 24 28 31 31 40 40 40 40 50 50 50 56 50 63
      *l = Nominal ordering length of ball cage - prefered length
      Ordering Code (example):
      Guide bush with collar, for ball bearing, ~AFNOR =210.45.
      Guide diameter d 1 16 mm = 016.
      Total length l 1 16 mm = 016.
      Classification TOL yellow = 10
      Order No =210.45. 016. 016. 10
      210.45. Guide bush with collar, for ball bearing, ~AFNOR
      subject to alterations
      Guide bush with collar, bronze coated, ~AFNOR
      h
      d
      G5/G6
      M
      1
      4
      d
      k5 2
      d
      5
      d
      3
      l
      l
      2
      l
      1
      l
      4
      l
      210.85.
      d 6
      Material:
      1.0503
      ∅ d 2 induction hardened to 500+100 HV 10
      Execution:
      Bronze coated internal bore.
      Diameter d 2 and collar face precision ground.
      up to ∅ d 1 = 25 tolerance G6
      from ∅ d 1 = 32 tolerance G5
      Note:
      The guide bush is fixed with slotted nut 207.48.
      Notes on sliding type guides at the beginning of chapter D.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Mounting example
      D155
      d 1 16 16 20 20 25 25 32 32 40 40 50 50
      TOL +0.006/
      +0.017
      +0.006/
      +0.017
      +0.007/
      +0.020
      +0.007/
      +0.020
      +0.007/
      +0.020
      +0.007/
      +0.020
      +0.009/
      +0.020
      +0.009/
      +0.020
      +0.009/
      +0.020
      +0.009/
      +0.020
      +0.009/
      +0.020
      +0.009/
      +0.020
      d 2 28 28 32 32 40 40 50 50 63 63 80 80
      d 4 32 32 36 36 45 45 56 56 70 70 90 90
      d 5 3 3 4 4 4 4 4 4 7 7 7 7
      d 6 40 40 44 44 55 55 65 65 81 81 100 100
      h 3 3 4 4 4 4 5 5 6 6 8 8
      M M27x1 M27x1 M30x1 M30x1 M39x1 M39x1 M48x1 M48x1 M60x1 M60x1 M76x1 M76x1
      l 16 20 21 25 26 31 31 38 39 47 41 49
      l 1 3 3 3 3 3 3 4 4 4 4 5 5
      l 2 11 15 15 19 19 24 24 31 31 39 31 39
      l 3 5 5 6 6 7 7 7 7 8 8 10 10
      l 4 5.5 7.5 5 9.5 9.5 12 12 15.5 15.5 19.5 15.5 19.5
      Ordering Code (example):
      Guide bush with collar, bronze coated, ~AFNOR =210.85.
      Guide diameter d 1 16 mm = 016.
      Total length l 16 mm = 016
      Order No =210.85. 016. 016
      210.85. Guide bush with collar, bronze coated, ~AFNOR
      subject to alterations
      Slotted nut
      Material:
      Steel
      Note:
      For fixing the guide bushes 210.45. and 210.85.
      h
      t
      6
      d
      m (5H)
      H13
      b
      207.48.
      D156
      Order No d 6 b t h m
      207.48.016 40 5 3 3 M27 x 1
      207.48.020 44 5 4 4 M30 x 1
      207.48.025 55 6 4 4 M39 x 1
      207.48.032 65 6 5 5 M48 x 1
      207.48.040 81 7 6 6 M60 x 1
      207.48.050 100 8 8 8 M76 x 1
      207.48. Slotted nut
      Oilless Guide
      Elements
      Oilless Guide
      Elements
      D157
      CU 60–66%
      Al 5,0–7,5%
      Fe 2,0–4,0%
      Mn 2,5–5,0%
      Zn 17,5–31,5%
      8,2
      770
      180–210
      560
      450
      8
      12
      105–115
      15
      0,04–0,10
      45–55
      +300
      1,6–2,0 × 10 -5
      1,8–2,3
      7–8
      ±150
      25–30
      5000 80 30 10000
      3000 150 60 20000
      subject to alterations
      Oilless guide elements
      General description
      Oilless Guide Elements with embedded solid lubricants are used in
      applications of linear or rotary motion in toolmaking, general machine
      construction and similar engineering uses. The structure of the base ma-
      terial provides closely spaced deposits of solid lubricant – properties and
      specifications as per table below.
      The elements satisfy highest demands in terms of load bearing capacity at
      low sliding speeds, within an extensive temperature band.
      The lubricant deposits are arranged in staggered geometrical patterns,
      thus en suring optimal lubrication effect along the sliding motion, especial-
      ly with counter bearings which are hardened and ground.
      The sliding surfaces should be lightly greased with lithium grease emulsi-
      on, prior to commissioning.
      On flat guideways and pillar guides, from 25 to 30 per cent of the sliding
      surfaces consist of lubricant deposits. Surfaces of counter bearings must
      have a ground finish, preferably with a lay parallel with the sliding motion.
      Choice of element-type
      Standard:
      – for general uses at temperatures up to 200°C
      Special Types on request
      Advantages of oilless guide elements
      – good emergency sliding properties
      – highest carrying capacity at low speed
      – use under water or with chemical solutions
      – extremely wide temperature resistance – hot and cold
      – damping properties in presence of vibration
      Oilless guide elements – Material data
      Surface pressure, temperature, speed and lubrication
      PV value
      The permissible bearing load is determined from the pressure and the
      PV value, which defines the bearing wear.
      The PV value is the product of surface pressure (P) and running velocity (V).
      The permissible bearing load is determined from the PV value.
      PV = P × V (N/cm 2 × m/min.)
      P = F/A (N/cm 2 )
      F = max. load (N)
      A = projected area of the bearing
      chemical composition
      specific density kg/dm 3
      tensile strength Rm N/mm 2
      Brinell hardness HB 10
      shear strength N/mm 2
      yield limit Rp 0,2 N/mm 2
      elongation to fracture A5 %
      elongation %
      modulus of elasticity kN/mm 2
      stroking velocity m/min
      co-efficient of friction
      temperature conductance W/(m × K)
      temperature resistance °C
      co-efficient of thermal expansion /°C
      co-efficient of shrinkage %
      electric conductance m/(? × mm 2 )
      alt. flexural strength N/mm 2
      ratio sliding surface to lubricant deposits (%)
      Surface pressure max. (N/cm 2 ) Temp. (C°) Speed (m/min.) PV value (N/cm 2 × m/min) Lubrication
      Initial
      Pressure Iubrication
      D158
      CU 60–66%
      Al 5,0–7,5%
      Fe 2,0–4,0%
      Mn 2,5–5,0%
      Zn 17,5–31,5%
      8,2
      770
      180–210
      560
      450
      8
      12
      105–115
      15
      0,04–0,10
      45–55
      +300
      1,6–2,0 × 10 -5
      1,8–2,3
      7–8
      ±150
      25–30
      5000 80 30 10000
      3000 150 60 20000
      subject to alterations
      Oilless guide elements
      General description
      Oilless Guide Elements with embedded solid lubricants are used in
      applications of linear or rotary motion in toolmaking, general machine
      construction and similar engineering uses. The structure of the base ma-
      terial provides closely spaced deposits of solid lubricant – properties and
      specifications as per table below.
      The elements satisfy highest demands in terms of load bearing capacity at
      low sliding speeds, within an extensive temperature band.
      The lubricant deposits are arranged in staggered geometrical patterns,
      thus en suring optimal lubrication effect along the sliding motion, especial-
      ly with counter bearings which are hardened and ground.
      The sliding surfaces should be lightly greased with lithium grease emulsi-
      on, prior to commissioning.
      On flat guideways and pillar guides, from 25 to 30 per cent of the sliding
      surfaces consist of lubricant deposits. Surfaces of counter bearings must
      have a ground finish, preferably with a lay parallel with the sliding motion.
      Choice of element-type
      Standard:
      – for general uses at temperatures up to 200°C
      Special Types on request
      Advantages of oilless guide elements
      – good emergency sliding properties
      – highest carrying capacity at low speed
      – use under water or with chemical solutions
      – extremely wide temperature resistance – hot and cold
      – damping properties in presence of vibration
      Oilless guide elements – Material data
      Surface pressure, temperature, speed and lubrication
      PV value
      The permissible bearing load is determined from the pressure and the
      PV value, which defines the bearing wear.
      The PV value is the product of surface pressure (P) and running velocity (V).
      The permissible bearing load is determined from the PV value.
      PV = P × V (N/cm 2 × m/min.)
      P = F/A (N/cm 2 )
      F = max. load (N)
      A = projected area of the bearing
      chemical composition
      specific density kg/dm 3
      tensile strength Rm N/mm 2
      Brinell hardness HB 10
      shear strength N/mm 2
      yield limit Rp 0,2 N/mm 2
      elongation to fracture A5 %
      elongation %
      modulus of elasticity kN/mm 2
      stroking velocity m/min
      co-efficient of friction
      temperature conductance W/(m × K)
      temperature resistance °C
      co-efficient of thermal expansion /°C
      co-efficient of shrinkage %
      electric conductance m/(? × mm 2 )
      alt. flexural strength N/mm 2
      ratio sliding surface to lubricant deposits (%)
      Surface pressure max. (N/cm 2 ) Temp. (C°) Speed (m/min.) PV value (N/cm 2 × m/min) Lubrication
      Initial
      Pressure Iubrication
      subject to alterations
      Thrust washer, Bronze with solid lubricant
      2053.70.
      90°
      d
      -0,1
      0,5 x 45°
      5
      d
      3
      d
      4
      d
      s
      0,5 x 45°
      7
      d 6
      t
      Material:
      Bronze with solid lubricant, oilless lubricating
      Note:
      For combination loads use together with Bushes 2052.70.
      Screws not included.
      Fixing:
      from d 3 = 10,2 2 X M3
      from d 3 = 20,2 2 X M5
      from d 3 = 40,2 2 X M6
      from d 3 = 50,3 4 X M6
      from d 3 = 60,3 4 X M8
      from d 3 = 90,5 4 X M10
      D159
      d 1 10 12 13 14 15 16 18 20 25 30 35 40 45 50 55 60 65 70 75 80 90 100 120
      d 3 10.2 12.2 13.2 14.2 15.2 16.2 18.2 20.2 25.2 30.2 35.2 40.2 45.3 50.3 55.3 60.3 65.3 70.3 75.3 80.3 90.5 100.5 120.5
      d 4 30 40 40 40 50 50 50 50 55 60 70 80 90 100 110 120 125 130 140 150 170 190 200
      d 5 20 28 28 28 28 28 35 35 40 45 50 60 67.5 75 85 90 95 100 110 120 140 160 175
      d 6 3.4 3.4 3.4 3.4 3.4 3.4 3.4 5.5 5.5 5.5 5.5 6.6 6.6 6.6 6.6 9 9 9 9 9 11 11 11
      d 7 6.9 6.9 6.9 6.9 6.9 6.9 6.9 11.5 11.5 11.5 11.5 13.7 13.7 13.7 13.7 18.3 18.3 18.3 18.3 18.3 22.7 22.7 22.7
      s 3 3 3 3 3 3 3 5 5 5 5 7 7 8 8 8 8 10 10 10 10 10 10
      t 1.8 1.8 1.8 1.8 1.8 1.8 1.8 3 3 3 3 3.6 3.6 3.6 3.6 4.6 4.6 4.6 4.6 4.6 5.9 5.9 5.9
      Ordering Code (example):
      Thrust washer, Bronze with solid lubricant =2053.70.
      Guide diameter d 1 10 mm = 010
      Order No =2053.70. 010
      2053.70. Thrust washer, Bronze with solid lubricant
      subject to alterations
      Guide bush, Bronze with solid lubricant
      Material:
      Bronze with solid lubricant, oilless lubricating
      Note:
      Bushes can be used with radial or axial motion.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Attention:
      Note that press fitment reduces inside bush diameter.
      2052.70.
      2
      d
      m6
      4
      l
      15°
      r
      r
      d 1 F7 A
      Ø0,02 A
      1
      l
      D160
      d 1 8 10 10 12 13 14 15 16 18 19 20 20 20 24 25 25 25 28 30 30 30 31.5 32 35 35 38 40 40
      d 2 12 14 15 18 19 20 21 22 24 25 26 28 30 32 32 33 35 38 38 40 42 40 42 44 45 48 50 55
      r 0.5 0.5 0.5 0.5 0.5 0.5 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 1.5 1.5 1.5
      l 4 2 2 2 2 2 2 2 2 2 2 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
      l 1
      8 ● ●
      10 ● ● ● ● ● ● ● ●
      12 ● ● ● ● ● ●
      15 ● ● ● ● ● ● ● ● ●
      16 ● ● ● ● ● ● ● ● ●
      20 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      25 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      30 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      35 ● ● ● ● ● ● ● ● ● ● ● ●
      37 ● ●
      40 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      47 ● ●
      50 ● ● ● ● ● ● ● ● ● ●
      60 ● ● ● ● ● ● ● ● ●
      70 ●
      77 ● ●
      80 ●
      Ordering Code (example):
      Guide bush, Bronze with solid lubricant =2052.70.
      Guide diameter d 1 8 mm = 008.
      External diameter d 2 12 mm = 012.
      Installation length l 1 8 mm = 008
      Order No =2052.70. 008. 012.008
      2052.70. Guide bush, Bronze with solid lubricant
      subject to alterations
      Guide bush, Bronze with solid lubricant
      2052.70.
      2
      d
      m6
      4
      l
      15°
      r
      r
      d 1 F7 A
      Ø0,02 A
      1
      l
      Material:
      Bronze with solid lubricant, oilless lubricating
      Note:
      Bushes can be used with radial or axial motion.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Attention:
      Note that press fitment reduces inside bush diameter.
      D161
      d 1 45 45 45 50 50 50 55 60 60 63 65 70 70 75 75 80 80 85 90 100 110 120 125 130 140 150 160
      d 2 55 56 60 60 62 65 70 74 75 75 80 85 90 90 95 96 100 100 110 120 130 140 145 150 160 170 180
      r 1.5 1.5 1.5 1.5 1.5 1.5 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
      l 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
      l 1
      30 ● ● ● ● ● ● ● ●
      35 ● ● ● ● ● ● ● ●
      40 ● ● ● ● ● ● ● ● ● ● ● ●
      50 ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      60 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      70 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      80 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      95 ●
      100 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
      120 ● ● ● ● ● ● ● ● ●
      130 ●
      140 ● ● ● ●
      150 ● ●
      Ordering Code (example):
      Guide bush, Bronze with solid lubricant =2052.70.
      Guide diameter d 1 8 mm = 008.
      External diameter d 2 12 mm = 012.
      Installation length l 1 8 mm = 008
      Order No =2052.70. 008. 012.008
      2052.70. Guide bush, Bronze with solid lubricant
      subject to alterations
      Guide bush with collar, Bronze with solid lubricant
      Material:
      Bronze with solid lubricant, oilless lubricating
      Note:
      Bushes can be used with radial or axial motion.
      Bushes can also be fitted with Loctite.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D
      2085.70.
      2
      2
      d
      G7
      k6
      d 3
      d 1 H7
      r
      r
      Ø0,02 A
      15°
      1 l
      2 l
      6
      A
      D162
      d 1 12 16 20 24
      d 2 16 20 26 30
      d 3 18 24 28 35
      r 2 2 2 2
      l 1 l 2
      20 14 ● ● ● ●
      25 19 ● ● ● ●
      30 24 ● ● ● ●
      Ordering Code (example):
      Guide bush with collar, Bronze with solid lubricant =2085.70.
      Guide diameter d 1 12 mm = 012.
      Length l 1 20 mm = 020
      Order No =2085.70. 012.020
      2085.70. Guide bush with collar, Bronze with solid lubricant
      subject to alterations
      Guide bush with collar, Bronze with solid lubricant
      2085.71.
      1
      1
      2
      2
      d
      H7
      r6
      d 3
      d 1 E7
      Ø0,02 A
      A
      2 l 3 l
      4 l
      15°
      r
      r
      r
      1 l
      Material:
      Bronze with solid lubricant, oilless lubricating
      Note:
      Bushes can be used with radial or axial motion.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Attention:
      Note that press fitment reduces inside bush diameter.
      D163
      d 1 10 12 13 14 15 16 20 25 30 31.5 35 40 45 50 55 60 63 70 75 80 90 100 120
      d 2 14 18 19 20 21 22 30 35 40 40 45 50 55 60 65 75 75 85 90 100 110 120 140
      d 3 22 25 26 27 28 29 40 45 50 50 60 65 70 75 80 90 85 105 110 120 130 150 170
      l 3 2 3 3 3 3 3 5 5 5 5 5 5 5 5 5 7.5 7.5 7.5 7.5 10 10 10 10
      l 4 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4
      r 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3
      r 2 0.4 0.4 0.4 0.4 0.5 0.5 0.5 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.7 0.7 0.7 0.7 0.7 0.8 0.8 0.8 0.8
      l 1 l 2
      15 13 12 12 12 12 12 10 10
      20 18 17 17 17 17 17 15 15 15 15 15 15
      25 22 22 20 20 20
      30 27 27 25 25 25 25 25 25 25
      35 30 30
      40 35 35 35 35 35 35 35 35 32.5
      50 45 45 45 45 45 42.5 42.5
      60 55 55 55 52.5 50 50
      67.5 60
      80 72.5 72.5 70 70 70 70
      100 90 90 90
      Ordering Code (example):
      Guide bush with collar, Bronze with solid lubricant =2085.71.
      Guide diameter d 1 10 mm = 010.
      Length l 1 15 mm = 015
      Order No =2085.71. 010. 015
      2085.71. Guide bush with collar, Bronze with solid lubricant
      subject to alterations
      Guide bush with collar, Bronze with solid lubricant
      Material:
      Bronze with solid lubricant, oilless lubricating
      Note:
      Bushes can be used with radial or axial motion.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Attention:
      Note that press fitment reduces inside bush diameter.
      2086.70.
      H7
      1 ±0,2
      l
      ±0,1
      2
      10°
      m6
      d 2
      1 F7
      d
      d 3 h12
      R 0,5
      r
      Ø0,02 A
      r
      A
      l
      3
      D164
      d 1 12 16 20 25 30 40 50 60
      d 2 18 22 28 33 38 50 62 75
      d 3 25 30 36 43 48 60 75 90
      r 1 1 1 1 1 2 2 3
      l 1 15 20 25 30 35 45 55 65
      l 2 4 5 5 5 5 5 6 7
      Ordering Code (example):
      Guide bush with collar, Bronze with solid lubricant =2086.70.
      Guide diameter d 1 12 mm = 012.
      Total length l 1 15 mm = 015
      Order No =2086.70. 012.015
      2086.70. Guide bush with collar, Bronze with solid lubricant
      subject to alterations
      Guide bush with collar, Bronze with solid lubricant
      2085.72.
      3
      d 3
      d 2 m6
      H7
      Ø0,02 A
      d 1 H7 A
      2 r
      1 r
      1 r
      r
      1 r
      2 l
      1 l
      3 l
      Material:
      Bronze with solid lubricant, oilless lubricating
      Note:
      Bushes can be used with radial or axial motion.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Attention:
      Note that press fitment reduces inside bush diameter.
      D165
      d 1 25 30 40 50 60 65 65 80 80 100 100
      d 2 35 40 55 65 75 80 80 100 100 120 120
      d 3 45 50 65 75 85 90 90 110 110 130 130
      r 10 20 20 20 20 20 20 20 20 20 20
      r 1 1 1 2 2 2 2 2 2 2 2 2
      r 2 2 2 2 2 2 2 2 2 2 3 3
      l 3 7 10 10 10 10 10 10 10 10 10 10
      l 2 33 40 60 70 70 70 110 90 130 90 130
      l 1 40 50 70 80 80 80 120 100 140 100 140
      Ordering Code (example):
      Guide bush with collar, Bronze with solid lubricant =2085.72.
      Guide diameter d 1 25 mm = 025.
      Length l 1 40 mm = 040
      Order No =2085.72. 025. 040
      2085.72. Guide bush with collar, Bronze with solid lubricant
      subject to alterations
      Guide bush with collar, Bronze with solid lubricant, DIN 9834/ISO 9448
      Material:
      Bronze with solid lubricant, oilless lubricating
      Note:
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Fixing:
      (to be ordered separately)
      Screw clamps with screws,
      up to ∅ d 1 = 50 - 2072.45.10 (M6 X 16 DIN EN ISO 4762)
      from ∅ d 1 = 60 - 2072.45.16 (M10 X 20 DIN EN ISO 4762)
      Attention:
      Bushes can only be used with axial motion!
      2082.70.
      7
      d
      3 l
      h
      H7
      h6 2
      d
      1 -1,0
      l
      1
      d
      H7
      3
      d
      4
      d
      4 l
      r
      R1
      A
      ∅ 0,02 A
      5 -0,5
      l
      -0,5
      6
      d
      D166
      d 1 24 25 30 32 38 40 48 50 60 63 80 100 125 160
      d 2 32 40 50 63 80 100 125 160 200
      d 3 40 50 63 71 90 112 140 180 220
      d 4 32 40 50 63 80 100 125 160 200
      d 6 58 66 79 89 123 143 168 203 243
      d 7 7 7 7 7 11.5 11.5 11.5 11.5 11.5
      l 1 40 50 63 71 80 100 125 160 200
      l 3 6.3 6.3 6.3 6.3 10 10 10 10 10
      l 4 3 4 5 6.3 8 10 12.5 16 16
      l 5 10 12 15 17 19 22 21 30 32
      h 10 10 10 10 16 16 16 16 16
      r 3 3 3 5 6 8 10 12 18
      Ordering Code (example):
      Guide bush with collar, Bronze with solid lubricant, DIN 9834/ISO 9448 =2082.70.
      Guide diameter d 1 24 mm = 024
      Order No =2082.70. 024
      2082.70. Guide bush with collar, Bronze with solid lubricant, DIN 9834/ISO 9448
      subject to alterations
      Guide bush with collar, Bronze with solid lubricant, NAAMS
      6
      1
      l
      16
      4
      l
      -2
      -3 2
      l
      r
      R2
      3
      d
      d
      d 6
      1
      d
      H7
      4
      H7
      g6 2
      d
      ø11,5
      2082.71.
      Material:
      Bronze with solid lubricant, oilless lubricating
      Note:
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Fixing:
      (to be ordered separately)
      Screw clamps with screws 2072.46 (M10 x 20 DIN EN ISO 4762)
      Attention:
      Bushes can only be used with axial motion!
      D167
      d 1 25 32 40 50 63 80 100 125
      d 2 32 40 50 63 80 100 125 160
      d 3 40 50 63 71 90 112 140 180
      d 4 32 40 50 63 80 100 125 160
      d 6 75 83 93 106 123 143 168 203
      l 1 40 50 63 71 80 100 125 160
      l 2 30 40 50 56 63 80 106 132
      l 4 3 4 5 6.3 8 10 12.5 16
      r 3 3 3 5 6 8 10 12
      Ordering Code (example):
      Guide bush with collar, Bronze with solid lubricant, NAAMS =2082.71.
      Guide diameter d 1 25 mm = 025
      Order No =2082.71. 025
      2082.71. Guide bush with collar, Bronze with solid lubricant, NAAMS
      subject to alterations
      Guide bush with collar, Bronze with solid lubricant, NAAMS
      Material:
      Bronze with solid lubricant, oilless lubricating
      Note:
      Bushes can be used with radial or axial motion.
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Fixing:
      (to be ordered separately)
      Screw clamps with screws 2072.47 (M8 x 20 DIN EN ISO 4762)
      30°
      6
      13
      1
      l
      2
      l
      R2
      M8

      4
      3
      d
      1
      d
      C9
      6
      d
      A
      g6 2
      d
      H7
      Ø0,02 A
      2086.71.
      D168
      d 1 25 32 40 50 63 80 100 125
      d 2 32 40 50 63 80 100 125 160
      d 3 40 50 63 71 90 112 140 180
      d 6 29 34 40.5 44.5 54 65 79 99
      l 1 40 50 55 63 75 90 115 138
      l 2 4 4 5 6 8 10 12 12
      Ordering Code (example):
      Guide bush with collar, Bronze with solid lubricant, NAAMS =2086.71.
      Guide diameter d 1 25 mm = 025
      Order No =2086.71. 025
      2086.71. Guide bush with collar, Bronze with solid lubricant, NAAMS
      subject to alterations
      Guide bush with collar, Bronze with solid lubricant, CNOMO
      h
      l 3
      k
      2
      l
      1
      l
      4
      l
      2072.48.45. 2073.45.
      3
      d
      d 2
      H6
      m6
      d 1 G7
      6
      d
      7
      d
      Øt A
      A
      2102.70.
      Material:
      Bronze with solid lubricant, oilless lubricating
      Note:
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Fixing:
      (to be ordered separately)
      Screw clamps with screws 2072.48.45. or
      Securing flange 2073.45.
      Attention:
      Bushes can only be used with axial motion!
      Note that press fitment reduces inside bush diameter.
      D169
      d 1 20 25 32 40 50 63 80 100
      d 2 28 35 44 52 63 80 100 125
      d 3 32 40 50 60 71 90 112 140
      d 6 - - - 75 90 111 133 162
      d 7 48 56 65 82 98 115 144 170
      l 1 32 40 50 63 80 100 125 160
      l 2 28 35 44 55 70 88 109 140
      l 3 4 5 6 8 10 12 16 20
      l 4 3 5 8 8 8 10 10 10
      h 10 10 12 12 16 20 25 32
      k - - - 12 16 20 25 32
      t 0.01 0.01 0.01 0.02 0.02 0.02 0.02 0.02
      Ordering Code (example):
      Guide bush with collar, Bronze with solid lubricant, CNOMO =2102.70.
      Guide diameter d 1 20 mm = 020
      Order No =2102.70. 020
      2102.70. Guide bush with collar, Bronze with solid lubricant, CNOMO
      subject to alterations
      Guide bush with collar, Bronze, CNOMO
      Material:
      Bronze
      Note:
      Matching guide combinations, see selection matrix at the beginning of
      chapter D.
      Assembly guide lines / Dimensional requirements and tolerances at the
      end of chapter D.
      Fixing:
      (to be ordered separately)
      Screw clamps with screws 2072.48.45. or
      Securing flange 2073.45.
      Attention:
      Bushes can only be used with axial motion!
      Note that press fitment reduces inside bush diameter.
      h l 6
      l
      k
      6
      l 3
      2
      l
      1
      l
      4
      l
      l1/2
      l 7
      2072.48.45. 2073.45.
      R1,5
      3
      d
      5
      d
      d 2
      H6
      m6
      Øt A
      d 1 G7
      6
      d
      7
      d
      2102.71.
      A
      D170
      d 1 20 25 32 40 50 63 80 100
      d 2 28 35 44 52 63 80 100 125
      d 3 32 40 50 60 71 90 112 140
      d 5 22 27 34 42 52 65 82 102
      d 6 - - - 75 90 111 133 162
      d 7 48 56 65 82 98 115 144 170
      l 1 32 40 50 63 80 100 125 160
      l 2 28 35 44 55 70 88 109 140
      l 3 4 5 6 8 10 12 16 20
      l 4 3 5 8 8 8 10 10 10
      l 6 - - 12 16 20 25 32 40
      l 7 5 5 5 8 10 12 16 20
      h 10 10 12 12 16 20 25 32
      k - - - 12 16 20 25 32
      t 0.01 0.01 0.01 0.02 0.02 0.02 0.02 0.02
      Ordering Code (example):
      Guide bush with collar, Bronze, CNOMO =2102.71.
      Guide diameter d 1 20 mm = 020
      Order No =2102.71.020
      2102.71. Guide bush with collar, Bronze, CNOMO
      subject to alterations
      Flat guide bar, Bronze with solid lubricant
      b
      R2
      s +0,3
      l
      2961.71.
      Material:
      Bronze with solid lubricant, oilless lubricating
      Execution:
      Sliding faces ground.
      D171
      Order No b s l l l
      305 605 1005
      2961.71.020.004.0305 20 4 ●
      2961.71.025.005.0305 25 5 ●
      2961.71.030.004.0305 30 4 ●
      2961.71.030.006.0305 30 6 ● ●
      2961.71.030.008.0305 30 8 ● ●
      2961.71.030.010.0305 30 10 ● ● ●
      2961.71.030.012.0305 30 12 ● ● ●
      2961.71.035.010.0305 35 10 ● ● ●
      2961.71.040.005.0305 40 5 ● ●
      2961.71.040.006.0305 40 6 ● ●
      2961.71.040.008.0305 40 8 ● ● ●
      2961.71.040.010.0305 40 10 ● ● ●
      2961.71.040.012.0605 40 12 ● ●
      2961.71.040.016.0605 40 16 ● ●
      2961.71.050.010.0305 50 10 ● ● ●
      2961.71.050.012.0605 50 12 ● ●
      2961.71.050.020.0605 50 20 ● ●
      2961.71.060.012.0605 60 12 ● ●
      2961.71.060.016.0605 60 16 ● ●
      2961.71.080.010.0305 80 10 ● ● ●
      2961.71.080.012.0605 80 12 ● ●
      2961.71.080.016.0605 80 16 ● ●
      2961.71.080.020.0605 80 20 ● ●
      2961.71.080.025.0605 80 25 ● ●
      2961.71.100.016.0605 100 16 ● ●
      2961.71.100.020.0605 100 20 ● ●
      2961.71.100.025.0605 100 25 ● ●
      2961.71.125.020.0605 125 20 ● ●
      2961.71.125.025.0605 125 25 ● ●
      2961.71.160.025.0605 160 25 ● ●
      Ordering Code (example):
      Flat guide bar, Bronze with solid lubricant =2961.71.
      Width b 20 mm = 020.
      Thickness s 4 mm = 004.
      Length l 305 mm = 0305
      Order No =2961.71.020. 004. 0305
      2961.71. Flat guide bar, Bronze with solid lubricant
      subject to alterations
      Flat guide bar, Bronze with solid lubricant
      Material:
      Bronze with solid lubricant, oilless lubricating
      Execution:
      Sliding faces ground.
      0
      -0,2
      a
      -0,1
      -0,2
      b
      s
      0
      -0,015
      2961.76.
      D172
      Order No b s a
      2961.76.025.005.050 25 5 50
      2961.76.025.005.071 25 5 71
      2961.76.025.005.090 25 5 90
      2961.76.025.006.050 25 6 50
      2961.76.025.006.063 25 6 63
      2961.76.025.006.080 25 6 80
      2961.76.025.006.100 25 6 100
      2961.76.025.006.125 25 6 125
      2961.76.040.005.050 40 5 50
      2961.76.040.005.071 40 5 71
      2961.76.040.005.090 40 5 90
      2961.76.040.006.080 40 6 80
      2961.76.040.006.100 40 6 100
      2961.76.040.006.125 40 6 125
      2961.76.040.006.160 40 6 160
      2961.76.040.006.200 40 6 200
      2961.76.063.006.080 63 6 80
      2961.76.063.006.100 63 6 100
      2961.76.063.006.125 63 6 125
      2961.76.063.006.160 63 6 160
      2961.76.063.008.125 63 8 125
      2961.76.063.008.160 63 8 160
      2961.76.063.008.200 63 8 200
      2961.76.063.008.250 63 8 250
      2961.76.063.008.315 63 8 315
      2961.76. Flat guide bar, Bronze with solid lubricant
      subject to alterations
      Flat guide bar, Bronze with solid lubricant
      0
      -0,5
      l
      -0,1
      -0,2
      b
      s
      0
      -0,015
      2961.77.
      Material:
      Bronze with solid lubricant, oilless lubricating
      Execution:
      Sliding faces ground.
      D173
      Order No b s l
      2961.77.025.006.500 25 6 500
      2961.77.040.006.500 40 6 500
      2961.77.063.008.500 63 8 500
      2961.77.080.010.500 80 10 500
      2961.77. Flat guide bar, Bronze with solid lubricant
      subject to alterations
      Flat guide bar with two sliding surfaces, Bronze with solid lubricant
      Material:
      Bronze with solid lubricant, oilless lubricating
      Execution:
      Sliding faces ground.
      +0,3
      s
      X
      l
      b +0,1
      X
      2961.73.
      D174
      Order No b s l l
      305 605
      2961.73.025.005.0305 25 5 ●
      2961.73.030.006.0305 30 6 ●
      2961.73.035.010.0605 35 10 ●
      2961.73.040.008.0605 40 8 ●
      2961.73.040.012.0605 40 12 ●
      2961.73.050.010.0605 50 10 ●
      2961.73.060.016.0605 60 16 ●
      2961.73.080.012.0605 80 12 ●
      2961.73.080.020.0605 80 20 ●
      2961.73.100.020.0605 100 20 ●
      2961.73. Flat guide bar with two sliding surfaces, Bronze with solid lubricant
      subject to alterations
      Flat guide bar, Bronze with solid lubricant
      l
      e 4
      3
      e e 2
      1
      e e
      l
      l
      4
      e
      3
      e e 2 e
      1
      e
      45
      b
      b
      10
      +0,04
      +0,01
      R2
      DIN 74 - Jm 6
      b
      e
      1
      e
      A
      DIN 74 - Jm 8
      DIN 74 - Jm 8
      F
      ± 0,025
      10
      R2
      R2
      ± 0,025
      10
      E
      b
      2961.70.
      Material:
      Bronze with solid lubricant, oilless lubricating
      Execution:
      Sliding faces ground.
      Note:
      Screws are not included.
      Fixing:
      Use socket cap screws DIN 7984.
      D175
      Order No Shape b l e e 1 e 2 e 3 e 4
      Number of
      screw holes
      2961.70.018.075 A 18 75 15 45 - - - 2
      2961.70.018.100 A 18 100 25 50 - - - 2
      2961.70.018.125 A 18 125 25 75 - - - 2
      2961.70.018.150 A 18 150 25 100 - - - 2
      2961.70.028.075 A 28 75 15 45 - - - 2
      2961.70.028.100 A 28 100 25 50 - - - 2
      2961.70.028.125 A 28 125 25 75 - - - 2
      2961.70.028.150 A 28 150 25 100 - - - 2
      2961.70.035.100 F 35 100 20 60 - - - 2
      2961.70.035.150 F 35 150 20 55 55 - - 3
      2961.70.035.200 F 35 200 20 55 50 55 - 4
      2961.70.035.250 F 35 250 20 70 70 70 - 4
      2961.70.035.300 F 35 300 20 65 65 65 65 5
      2961.70.035.350 F 35 350 20 80 75 75 80 5
      2961.70.038.075 A 38 75 15 45 - - - 2
      2961.70.038.100 A 38 100 25 50 - - - 2
      2961.70.038.125 A 38 125 25 75 - - - 2
      2961.70.038.150 A 38 150 25 100 - - - 2
      2961.70.048.075 A 48 75 15 45 - - - 2
      2961.70.048.100 A 48 100 25 50 - - - 2
      2961.70.048.125 A 48 125 25 75 - - - 2
      2961.70.048.150 A 48 150 25 100 - - - 2
      2961.70.050.100 F 50 100 20 60 - - - 2
      2961.70.050.150 F 50 150 20 55 55 - - 3
      2961.70.050.200 F 50 200 20 55 50 55 - 4
      2961.70.050.250 F 50 250 20 70 70 70 - 4
      2961.70.050.300 F 50 300 20 65 65 65 65 5
      2961.70.050.350 F 50 350 20 80 75 75 80 5
      2961.70.050.400 F 50 400 20 90 90 90 90 5
      2961.70.075.150 E 75 150 20 110 - - - 4
      2961.70.075.200 E 75 200 20 80 80 - - 6
      2961.70.075.250 E 75 250 20 105 105 - - 6
      2961.70.075.300 E 75 300 20 85 90 85 - 8
      2961.70.075.400 E 75 400 20 120 120 120 - 8
      2961.70.075.500 E 75 500 20 115 115 115 115 10
      2961.70. Flat guide bar, Bronze with solid lubricant
      subject to alterations
      Flat guide bar, Bronze with solid lubricant
      ø17,5
      R2
      R2
      7,3
      ø11
      0,02
      10 ±0,025
      2961.75.
      Material:
      Bronze with solid lubricant,
      oilless lubricating
      Note:
      Screws are not included.
      Attention:
      Direction of motion of flat guide
      bars with a width of b = 28 and
      38 mm only in longitudinal
      direction.
      Fixing:
      Use socket cap screws DIN 7984
      M10.
      e 1
      1
      e
      e 2 e 1
      b
      b
      b
      a
      l
      e a
      e
      l
      a
      l
      a e
      B A
      C
      2961.75.
      D176
      Order No Shape b l e a e 1 e 2
      Number of
      screw holes
      2961.75.028.075 A 28 75 15 45 14 - 2
      2961.75.028.100 A 28 100 25 50 14 - 2
      2961.75.028.125 A 28 125 25 75 14 - 2
      2961.75.028.150 A 28 150 25 100 14 - 2
      2961.75.038.075 A 38 75 15 45 19 - 2
      2961.75.038.100 A 38 100 25 50 19 - 2
      2961.75.038.125 A 38 125 25 75 19 - 2
      2961.75.038.150 A 38 150 25 100 19 - 2
      2961.75.048.075 A 48 75 15 45 24 - 2
      2961.75.048.100 A 48 100 25 50 24 - 2
      2961.75.048.125 A 48 125 25 75 24 - 2
      2961.75.048.150 A 48 150 25 100 24 - 2
      2961.75.048.200 A 48 200 50 100 24 - 2
      2961.75.058.075 A 58 75 15 45 29 - 2
      2961.75.058.100 A 58 100 25 50 29 - 2
      2961.75.058.125 A 58 125 25 75 29 - 2
      2961.75.058.150 A 58 150 25 100 29 - 2
      2961.75.058.200 A 58 200 50 100 29 - 2
      2961.75.075.075 A 75 75 15 45 37.5 - 2
      2961.75.075.100 A 75 100 25 50 37.5 - 2
      2961.75.075.125 A 75 125 25 75 37.5 - 2
      2961.75.075.150 A 75 150 25 100 37.5 - 2
      2961.75.075.200 C 75 200 25 75 37.5 - 3
      2961.75.100.100 B 100 100 25 50 25 50 4
      2961.75.100.125 B 100 125 25 75 25 50 4
      2961.75.100.150 B 100 150 25 100 25 50 4
      2961.75.100.200 B 100 200 25 150 25 50 4
      2961.75.100.250 B 100 250 25 200 25 50 4
      2961.75.125.150 B 125 150 25 100 37.5 50 4
      2961.75.125.200 B 125 200 25 150 37.5 50 4
      2961.75.125.250 B 125 250 25 200 37.5 50 4
      2961.75.150.150 B 150 150 25 100 25 100 4
      2961.75.150.200 B 150 200 25 150 25 100 4
      2961.75. Flat guide bar, Bronze with solid lubricant
      subject to alterations
      Retaining plate, Bronze with solid lubricant, VDI 3357
      e 1
      e 1
      e
      e e
      e e
      e 2
      e 2
      e 2
      e 2
      a
      a
      a
      2
      b
      1
      b
      b
      2
      b
      1
      b
      b
      2
      b
      1
      b
      b
      e
      a
      s
      2
      b
      1
      b
      b
      A
      ød
      ød
      ød
      ød
      e
      e 1
      B
      C
      D
      2961.74.
      Material:
      Bronze with solid lubricant, oilless lubricating
      Note:
      Screws are not included.
      Fixing:
      Use socket cap screws DIN EN ISO 4762.
      Mounting example
      D177
      Order No Shape b s a b 2 b 1 d e e 1 e 2
      Number of
      screw holes
      2961.74.035.10.160 A 35 10 160 10 20 11 70 - 45 2
      2961.74.035.10.200 A 35 10 200 10 20 11 110 - 45 2
      2961.74.035.10.250 B 35 10 250 10 20 11 80 - 45 3
      2961.74.045.15.160 A 45 15 160 15 30 13.5 70 - 45 2
      2961.74.045.15.200 A 45 15 200 15 30 13.5 110 - 45 2
      2961.74.045.15.250 B 45 15 250 15 30 13.5 80 - 45 3
      2961.74.055.15.160 A 55 15 160 20 35 17.5 70 - 45 2
      2961.74.055.15.200 A 55 15 200 20 35 17.5 110 - 45 2
      2961.74.055.15.250 B 55 15 250 20 35 17.5 80 - 45 3
      2961.74.075.25.160 A 75 25 160 25 40 17.5 70 - 45 2
      2961.74.075.25.200 A 75 25 200 25 40 17.5 110 - 45 2
      2961.74.075.25.250 B 75 25 250 25 40 17.5 80 - 45 3
      2961.74.085.28.240 B 85 28 240 30 60 22 95 - 25 3
      2961.74.085.28.300 D 85 28 300 30 60 22 85 80 25 4
      2961.74.085.28.350 D 85 28 350 30 60 22 100 100 25 4
      2961.74.085.28.400 D 85 28 400 30 60 22 115 120 25 4
      2961.74.085.28.450 C 85 28 450 30 60 22 100 100 25 5
      2961.74.085.30.160 A 85 30 160 30 60 22 70 - 45 2
      2961.74.085.30.200 A 85 30 200 30 60 22 110 - 45 2
      2961.74.085.30.250 B 85 30 250 30 60 22 80 - 45 3
      2961.74.085.30.300 B 85 30 300 30 60 22 105 - 45 3
      2961.74.085.30.350 B 85 30 350 30 60 22 130 - 45 3
      2961.74.085.30.400 C 85 30 400 30 60 22 80 75 45 5
      2961.74.100.25.160 A 100 25 160 30 60 17.5 70 - 45 2
      2961.74.100.25.200 A 100 25 200 30 60 17.5 110 - 45 2
      2961.74.100.25.250 B 100 25 250 30 60 17.5 80 - 45 3
      2961.74.100.25.400 C 100 25 400 30 60 17.5 80 75 45 5
      2961.74.100.30.160 A 100 30 160 30 60 22 70 - 45 2
      2961.74.100.30.200 A 100 30 200 30 60 22 110 - 45 2
      2961.74.100.30.250 B 100 30 250 30 60 22 80 - 45 3
      2961.74.100.30.400 C 100 30 400 30 60 22 80 75 45 5
      2961.74.125.25.160 A 125 25 160 30 75 17.5 70 - 45 2
      2961.74.125.25.200 A 125 25 200 30 75 17.5 110 - 45 2
      2961.74.125.25.250 B 125 25 250 30 75 17.5 80 - 45 3
      2961.74.125.25.300 D 125 25 300 30 80 26 85 80 25 4
      2961.74.125.25.350 D 125 25 350 30 80 26 100 100 25 4
      2961.74.125.25.400.1 D 125 25 400 30 80 26 115 120 25 4
      2961.74.125.25.400 C 125 25 400 30 75 17.5 80 75 45 5
      2961.74.125.25.450 C 125 25 450 30 80 26 100 100 25 5
      2961.74.125.25.500 C 125 25 500 30 80 26 110 115 25 5
      2961.74.125.30.160 A 125 30 160 30 75 22 70 - 45 2
      2961.74.125.30.200 A 125 30 200 30 75 22 110 - 45 2
      2961.74.125.30.250 B 125 30 250 30 75 22 80 - 45 3
      2961.74.125.30.300 B 125 30 300 30 75 22 105 - 45 3
      2961.74.125.30.350 B 125 30 350 30 75 22 130 - 45 3
      2961.74.125.30.400 C 125 30 400 30 75 22 80 75 45 5
      2961.74.125.30.450 C 125 30 450 30 75 22 80 95 50 5
      2961.74.125.30.500 C 125 30 500 30 75 22 80 120 50 5
      2961.74. Retaining plate, Bronze with solid lubricant,
      VDI 3357
      subject to alterations
      Retaining plate, Steel, VDI 3357
      Material:
      Steel, surface hardened
      Note:
      Screws are not included.
      Fixing:
      Use socket cap screws DIN EN ISO 4762.
      e 2
      ød
      b
      1
      b
      a
      e e e 1
      D
      ød
      1
      b
      b
      a
      e
      A
      e 2
      ød
      1
      b
      b
      a
      e e
      B
      e 2
      ød
      1
      b
      b
      a
      e
      e e 1
      e 1
      C
      e 2
      2961.79.
      Mounting example
      D178
      Order No Shape b s a b 1 d e e 1 e 2
      Number of
      screw holes
      2961.79.035.10.160 A 35 10 160 20 11 70 - 45 2
      2961.79.035.10.200 A 35 10 200 20 11 110 - 45 2
      2961.79.035.10.250 B 35 10 250 20 11 80 - 45 3
      2961.79.045.15.160 A 45 15 160 30 13.5 70 - 45 2
      2961.79.045.15.200 A 45 15 200 30 13.5 110 - 45 2
      2961.79.045.15.250 B 45 15 250 30 13.5 80 - 45 3
      2961.79.055.15.160 A 55 15 160 35 17.5 70 - 45 2
      2961.79.055.15.200 A 55 15 200 35 17.5 110 - 45 2
      2961.79.055.15.250 B 55 15 250 35 17.5 80 - 45 3
      2961.79.075.25.160 A 75 25 160 40 17.5 70 - 45 2
      2961.79.075.25.200 A 75 25 200 40 17.5 110 - 45 2
      2961.79.075.25.250 B 75 25 250 40 17.5 80 - 45 3
      2961.79.085.28.240 B 85 28 240 60 22 95 - 25 3
      2961.79.085.28.300 D 85 28 300 60 22 85 80 25 4
      2961.79.085.28.350 D 85 28 350 60 22 100 100 25 4
      2961.79.085.28.400 D 85 28 400 60 22 115 120 25 4
      2961.79.085.28.450 C 85 28 450 60 22 100 100 25 5
      2961.79.085.30.160 A 85 30 160 60 22 70 - 45 2
      2961.79.085.30.200 A 85 30 200 60 22 110 - 45 2
      2961.79.085.30.250 B 85 30 250 60 22 80 - 45 3
      2961.79.085.30.300 B 85 30 300 60 22 105 - 45 3
      2961.79.085.30.350 B 85 30 350 60 22 130 - 45 3
      2961.79.085.30.400 C 85 30 400 60 22 80 75 45 5
      2961.79.100.25.160 A 100 25 160 60 17.5 70 - 45 2
      2961.79.100.25.200 A 100 25 200 60 17.5 110 - 45 2
      2961.79.100.25.250 B 100 25 250 60 17.5 80 - 45 3
      2961.79.100.25.400 C 100 25 400 60 17.5 80 75 45 5
      2961.79.100.30.160 A 100 30 160 60 22 70 - 45 2
      2961.79.100.30.200 A 100 30 200 60 22 110 - 45 2
      2961.79.100.30.250 B 100 30 250 60 22 80 - 45 3
      2961.79.100.30.400 C 100 30 400 60 22 80 75 45 5
      2961.79.125.25.160 A 125 25 160 75 17.5 70 - 45 2
      2961.79.125.25.200 A 125 25 200 75 17.5 110 - 45 2
      2961.79.125.25.250 B 125 25 250 75 17.5 80 - 45 3
      2961.79.125.25.400 C 125 25 400 75 17.5 80 75 45 5
      2961.79.125.25.300 D 125 25 300 80 26 85 80 25 4
      2961.79.125.25.350 D 125 25 350 80 26 100 100 25 4
      2961.79.125.25.400.1 D 125 25 400 80 26 115 120 25 4
      2961.79.125.25.450 C 125 25 450 80 26 100 100 25 5
      2961.79.125.25.500 C 125 25 500 80 26 110 115 25 5
      2961.79.125.30.160 A 125 30 160 75 22 70 - 45 2
      2961.79.125.30.200 A 125 30 200 75 22 110 - 45 2
      2961.79.125.30.250 B 125 30 250 75 22 80 - 45 3
      2961.79.125.30.300 B 125 30 300 75 22 105 - 45 3
      2961.79.125.30.350 B 125 30 350 75 22 130 - 45 3
      2961.79.125.30.400 C 125 30 400 75 22 80 75 45 5
      2961.79.125.30.450 C 125 30 450 75 22 80 95 50 5
      2961.79.125.30.500 C 125 30 500 75 22 80 120 50 5
      2961.79. Retaining plate, Steel, VDI 3357
      subject to alterations
      Retaining plate, Steel with solid lubricant, VDI 3357
      A
      e 2 e
      a
      s
      2
      b
      1
      b
      b
      ød
      e e e 2
      a
      2
      b
      1
      b
      b
      ød
      B
      e 1 e e e 2
      a
      2
      b
      1
      b
      b
      ød
      e 1
      C
      e 1 e e 2
      a
      2
      b
      1
      b
      b
      ød
      e
      D
      2961.81.
      Material:
      Steel, surface hardened. Sliding faces with
      embedded solid lubricant.
      Note:
      Screws are not included.
      Fixing:
      Use socket cap screws DIN EN ISO 4762.
      Mounting example
      D179
      Order No Shape b s a b 2 b 1 d e e 1 e 2
      Number of
      screw holes
      2961.81.035.10.160 A 35 10 160 10 20 11 70 - 45 2
      2961.81.035.10.200 A 35 10 200 10 20 11 110 - 45 2
      2961.81.035.10.250 B 35 10 250 10 20 11 80 - 45 3
      2961.81.045.15.160 A 45 15 160 15 30 13.5 70 - 45 2
      2961.81.045.15.200 A 45 15 200 15 30 13.5 110 - 45 2
      2961.81.045.15.250 B 45 15 250 15 30 13.5 80 - 45 3
      2961.81.055.15.160 A 55 15 160 20 35 17.5 70 - 45 2
      2961.81.055.15.200 A 55 15 200 20 35 17.5 110 - 45 2
      2961.81.055.15.250 B 55 15 250 20 35 17.5 80 - 45 3
      2961.81.075.25.160 A 75 25 160 25 40 17.5 70 - 45 2
      2961.81.075.25.200 A 75 25 200 25 40 17.5 110 - 45 2
      2961.81.075.25.250 B 75 25 250 25 40 17.5 80 - 45 3
      2961.81.085.28.240 B 85 28 240 30 60 22 95 - 25 3
      2961.81.085.28.300 D 85 28 300 30 60 22 85 80 25 4
      2961.81.085.28.350 D 85 28 350 30 60 22 100 100 25 4
      2961.81.085.28.400 D 85 28 400 30 60 22 115 120 25 4
      2961.81.085.28.450 C 85 28 450 30 60 22 100 100 25 5
      2961.81.085.30.160 A 85 30 160 30 60 22 70 - 45 2
      2961.81.085.30.200 A 85 30 200 30 60 22 110 - 45 2
      2961.81.085.30.250 B 85 30 250 30 60 22 80 - 45 3
      2961.81.085.30.300 B 85 30 300 30 60 22 105 - 45 3
      2961.81.085.30.350 B 85 30 350 30 60 22 130 - 45 3
      2961.81.085.30.400 C 85 30 400 30 60 22 80 75 45 5
      2961.81.100.25.160 A 100 25 160 30 60 17.5 70 - 45 2
      2961.81.100.25.200 A 100 25 200 30 60 17.5 110 - 45 2
      2961.81.100.25.250 B 100 25 250 30 60 17.5 80 - 45 3
      2961.81.100.25.400 C 100 25 400 30 60 17.5 80 75 45 5
      2961.81.100.30.160 A 100 30 160 30 60 22 70 - 45 2
      2961.81.100.30.200 A 100 30 200 30 60 22 110 - 45 2
      2961.81.100.30.250 B 100 30 250 30 60 22 80 - 45 3
      2961.81.100.30.400 C 100 30 400 30 60 22 80 75 45 5
      2961.81.125.25.160 A 125 25 160 30 75 17.5 70 - 45 2
      2961.81.125.25.200 A 125 25 200 30 75 17.5 110 - 45 2
      2961.81.125.25.250 B 125 25 250 30 75 17.5 80 - 45 3
      2961.81.125.25.300 D 125 25 300 30 80 26 85 80 25 4
      2961.81.125.25.350 D 125 25 350 30 80 26 100 100 25 4
      2961.81.125.25.400 C 125 25 400 30 75 17.5 80 75 45 5
      2961.81.125.25.400.1 D 125 25 400 30 80 26 115 120 25 4
      2961.81.125.25.450 C 125 25 450 30 80 26 100 100 25 5
      2961.81.125.25.500 C 125 25 500 30 80 26 110 115 25 5
      2961.81.125.30.160 A 125 30 160 30 75 22 70 - 45 2
      2961.81.125.30.200 A 125 30 200 30 75 22 110 - 45 2
      2961.81.125.30.250 B 125 30 250 30 75 22 80 - 45 3
      2961.81.125.30.300 B 125 30 300 30 75 22 105 - 45 3
      2961.81.125.30.350 B 125 30 350 30 75 22 130 - 45 3
      2961.81.125.30.400 C 125 30 400 30 75 22 80 75 45 5
      2961.81.125.30.450 C 125 30 450 30 75 22 80 95 50 5
      2961.81.125.30.500 C 125 30 500 30 75 22 80 120 50 5
      2961.81. Retaining plate, Steel with solid lubricant, VDI 3357
      subject to alterations
      Retaining plate, Bronze with solid lubricant
      Material:
      Bronze with solid lubricant,
      oilless lubricating
      Note:
      Screws are not included.
      Fixing:
      Use socket cap screws
      DIN EN ISO 4762 M10.
      b 1
      b
      a
      a
      1
      e e
      1
      e e
      a
      e e
      ±0,025
      10
      ø11
      b 2 b 2
      b b
      e
      a
      a
      1
      e
      b 2
      b
      20
      a
      a
      e e
      1
      e
      b 1
      e e
      1
      e
      20
      b 1
      b 2
      b
      20
      20
      e e
      1
      b
      1
      b
      G
      ±0,1
      10
      b 1
      b 2
      b
      20
      1
      e
      1
      e
      1
      e
      20
      1
      e
      1
      e
      b 1
      b 2
      b
      F E D C B A
      2961.78.
      Mounting example
      D180
      Order No Shape a b b 1 b 2 e e 1
      Number of
      screw holes
      2961.78.032.0100 A 100 32 10 21 60 - 2
      2961.78.032.0150 B 150 32 10 21 55 - 3
      2961.78.032.0160 B 160 32 10 21 60 - 3
      2961.78.050.0200 C 200 50 30 36 50 60 4
      2961.78.050.0250 C 250 50 30 36 70 70 4
      2961.78.050.0300 D 300 50 30 36 65 65 5
      2961.78.050.0350 D 350 50 30 36 80 75 5
      2961.78.050.0400 D 400 50 30 36 90 90 5
      2961.78.050.0500 E 500 50 30 36 95 90 6
      2961.78.050.0600 E 600 50 30 36 115 110 6
      2961.78.050.0800 F 800 50 30 36 130 125 7
      2961.78.050.0605 G 605 50 30 36 - - -
      2961.78.050.1005 G 1005 50 30 36 - - -
      2961.78. Retaining plate, Bronze with solid lubricant
      subject to alterations
      Retaining plate, Steel with solid lubricant, NAAMS
      30
      A
      ø17,5
      a
      a
      a
      a
      e 1
      e 1
      e 1 e 1
      e e
      e e
      e e
      e e
      25
      2
      b
      1
      b
      b
      20
      25
      25
      25
      2
      b
      1
      b
      b
      20
      2
      b
      1
      b
      b
      20
      2
      b
      1
      b
      b
      20
      B D
      C
      2961.82.
      Material:
      Steel, surface hardened. Sliding
      faces with embedded solid
      lubricant.
      Note:
      Screws are not included.
      Fixing:
      Use socket cap screws
      DIN EN ISO 4762 M16.
      Mounting example
      D181
      Order No Shape b a b 1 b 2 e e 1
      Number of
      screw holes
      2961.82.075.200 A 75 200 55 40 75 - 3
      2961.82.075.250 B 75 250 55 40 65 70 4
      2961.82.075.250.1 D 75 250 55 40 65 70 4
      2961.82.075.250.2 A 75 250 55 40 100 - 3
      2961.82.075.315 C 75 315 55 40 65 67.5 5
      2961.82.075.350 C 75 350 55 40 75 75 5
      2961.82.075.400 C 75 400 55 40 90 85 5
      2961.82.075.450 C 75 450 55 40 100 100 5
      2961.82.100.200 A 100 200 80 55 75 - 3
      2961.82.100.250 B 100 250 80 55 65 70 4
      2961.82.100.250.1 D 100 250 80 55 65 70 4
      2961.82.100.250.2 A 100 250 80 55 100 - 3
      2961.82.100.315 C 100 315 80 55 65 67.5 5
      2961.82.100.350 C 100 350 80 55 75 75 5
      2961.82.100.400 C 100 400 80 55 90 85 5
      2961.82.100.450 C 100 450 80 55 100 100 5
      2961.82.125.200 A 125 200 105 65 75 - 3
      2961.82.125.250 B 125 250 105 65 65 70 4
      2961.82.125.250.1 D 125 250 105 65 65 70 4
      2961.82.125.250.2 A 125 250 105 65 100 - 3
      2961.82.125.315 C 125 315 105 65 65 67.5 5
      2961.82.125.350 C 125 350 105 65 75 75 5
      2961.82.125.400 C 125 400 105 65 90 85 5
      2961.82.125.450 C 125 450 105 65 100 100 5
      2961.82.150.200 A 150 200 130 65 75 - 3
      2961.82.150.250 B 150 250 130 65 65 70 4
      2961.82.150.250.1 D 150 250 130 65 65 70 4
      2961.82.150.250.2 A 150 250 130 65 100 - 3
      2961.82.150.315 C 150 315 130 65 65 67.5 5
      2961.82.150.350 C 150 350 130 65 75 75 5
      2961.82.150.400 C 150 400 130 65 90 85 5
      2961.82.150.450 C 150 450 130 65 100 100 5
      2961.82. Retaining plate, Steel with solid lubricant, NAAMS
      subject to alterations
      Retaining plate, Steel, CNOMO
      Material:
      Steel, surface hardened
      Note:
      Screws are not included.
      Fixing:
      Use socket cap screws DIN EN ISO 4762 M16.
      20
      35
      160
      125
      215
      100
      250
      ø17,5
      28
      80 80
      28
      35
      R2,5
      R2,5
      R2,5
      2961.79.45.
      Mounting example
      D182
      Order No Number of screw holes
      2961.79.45.080.20.160 2
      2961.79.45.080.20.250 3
      2961.79.45. Retaining plate, Steel, CNOMO
      subject to alterations
      Retaining plate, Bronze with solid lubricant, CNOMO
      20
      25
      160
      135
      85
      50
      25
      85
      50
      25
      250
      225
      125
      25
      ø11
      R2,5
      R2,5
      R2,5
      2961.81.45.
      Material:
      Bronze with solid lubricant, oilless lubricating
      Note:
      Screws are not included.
      Fixing:
      Use socket cap screws DIN EN ISO 4762 M10.
      Mounting example
      D183
      Order No Number of screw holes
      2961.81.45.085.20.160 2
      2961.81.45.085.20.250 3
      2961.81.45. Retaining plate, Bronze with solid lubricant, CNOMO
      subject to alterations
      Sliding pad, small dimension, Bronze with solid lubricant
      d
      5 ± 0,025
      90°
      2960.72.
      Material:
      Bronze with solid lubricant,
      oilless lubricating
      Note:
      Screws are not included.
      Fixing:
      Use countersunk cap screws
      DIN 7991/ISO 10642.
      15
      15
      15
      15
      e e
      a
      e
      a
      e e
      a
      e
      a
      1
      e
      1
      e
      b
      b
      b
      b
      A B
      C D
      2960.72.
      D184
      Order No Shape b a e e 1 d
      Number of
      screw holes
      2960.72.018.050 A 18 50 20 - 6.5 2
      2960.72.018.075 A 18 75 45 - 6.5 2
      2960.72.018.100 A 18 100 70 - 6.5 2
      2960.72.018.150 B 18 150 60 - 6.5 3
      2960.72.028.050 A 28 50 20 - 9 2
      2960.72.028.075 A 28 75 45 - 9 2
      2960.72.028.100 A 28 100 70 - 9 2
      2960.72.028.150 B 28 150 60 - 9 3
      2960.72.038.050 A 38 50 20 - 9 2
      2960.72.038.075 A 38 75 45 - 9 2
      2960.72.038.100 A 38 100 70 - 9 2
      2960.72.038.150 B 38 150 60 - 9 3
      2960.72.048.075 A 48 75 45 - 9 2
      2960.72.048.100 A 48 100 70 - 9 2
      2960.72.048.125 A 48 125 95 - 9 2
      2960.72.048.150 B 48 150 60 - 9 3
      2960.72.075.075 C 75 75 45 45 9 4
      2960.72.075.100 C 75 100 70 45 9 4
      2960.72.075.125 C 75 125 95 45 9 4
      2960.72.075.150 D 75 150 60 45 9 6
      2960.72.100.100 C 100 100 70 70 9 4
      2960.72.100.125 C 100 125 95 70 9 4
      2960.72.100.150 D 100 150 60 70 9 6
      2960.72. Sliding pad, small dimension, Bronze with solid lubricant
      subject to alterations D185
      subject to alterations
      Sliding pad, Bronze with solid lubricant, VDI 3357
      Material:
      Bronze with solid lubricant, oilless lubricating
      Note:
      Screws are not included.
      Fixing:
      Use socket cap screws DIN EN ISO 4762.
      H
      1
      l e
      a
      b
      1
      e
      1
      l
      b
      a
      1
      l e
      a
      1
      e
      b
      D B
      G
      1
      l e
      a
      1
      e
      b
      2960.71.
      X
      t
      d
      d 1
      10
      15°
      R5
      20
      0,02
      0
      -0,02
      3x45°
      2960.71.
      D186
      subject to alterations
      Sliding pad, Bronze with solid lubricant, VDI 3357
      D187
      Order No Shape b a l 1 e e 1 d d 1 t
      Number of
      screw holes
      2960.71.050.080 B 50 80 25 30 - 9 15 9 2
      2960.71.050.100 B 50 100 25 50 - 13.5 20 13 2
      2960.71.050.125 B 50 125 25 75 - 13.5 20 13 2
      2960.71.050.160 B 50 160 25 110 - 13.5 20 13 2
      2960.71.050.200 B 50 200 25 150 - 13.5 20 13 2
      2960.71.080.050 D 80 50 25 - 30 9 15 9 2
      2960.71.080.080 B 80 80 25 30 - 13.5 20 13 2
      2960.71.080.100 B 80 100 25 50 - 13.5 20 13 2
      2960.71.080.125 B 80 125 25 75 - 13.5 20 13 2
      2960.71.080.160 B 80 160 25 110 - 13.5 20 13 2
      2960.71.080.200 B 80 200 25 150 - 13.5 20 13 2
      2960.71.080.250 B 80 250 40 170 - 13.5 20 13 2
      2960.71.080.315 B 80 315 40 235 - 13.5 20 13 2
      2960.71.100.050 D 100 50 25 - 50 13.5 20 13 2
      2960.71.100.080 D 100 80 40 - 50 13.5 20 13 2
      2960.71.100.100 B 100 100 25 50 - 13.5 20 13 2
      2960.71.100.125 B 100 125 25 75 - 13.5 20 13 2
      2960.71.100.160 B 100 160 25 110 - 13.5 20 13 2
      2960.71.100.200 B 100 200 25 150 - 13.5 20 13 2
      2960.71.100.250 B 100 250 40 170 - 13.5 20 13 2
      2960.71.100.315 B 100 315 40 235 - 13.5 20 13 2
      2960.71.125.050 D 125 50 25 - 75 13.5 20 13 2
      2960.71.125.080 D 125 80 40 - 75 13.5 20 13 2
      2960.71.125.100 G 125 100 25 50 75 13.5 20 13 3
      2960.71.125.125 G 125 125 25 75 75 13.5 20 13 3
      2960.71.125.160 G 125 160 25 110 75 13.5 20 13 3
      2960.71.125.200 G 125 200 25 150 75 13.5 20 13 3
      2960.71.125.250 G 125 250 40 170 75 13.5 20 13 3
      2960.71.125.315 G 125 315 40 235 75 13.5 20 13 3
      2960.71.160.050 D 160 50 25 - 110 13.5 20 13 2
      2960.71.160.080 D 160 80 40 - 110 13.5 20 13 2
      2960.71.160.100 G 160 100 25 50 110 13.5 20 13 3
      2960.71.160.125 G 160 125 25 75 110 13.5 20 13 3
      2960.71.160.160 G 160 160 25 110 110 13.5 20 13 3
      2960.71.160.200 G 160 200 25 150 110 13.5 20 13 3
      2960.71.160.250 H 160 250 40 170 110 13.5 20 13 4
      2960.71.160.315 H 160 315 40 235 110 13.5 20 13 4
      2960.71. Sliding pad, Bronze with solid lubricant, VDI 3357
      subject to alterations
      Sliding pad, Steel, VDI 3357
      Material:
      Steel, surface hardened
      Note:
      Screws are not included.
      Fixing:
      Use socket cap screws DIN EN ISO 4762.
      H
      1
      l e
      a
      b
      1
      e
      1
      l
      b
      a
      1
      l e
      a
      1
      e
      b
      D B
      G
      1
      l e
      a
      1
      e
      b
      2960.87.
      X
      t
      d
      d 1
      10
      15°
      R5
      20
      0,02
      0
      -0,02
      3x45°
      2960.87.
      D188
      subject to alterations
      Sliding pad, Steel, VDI 3357
      D189
      Order No Shape b a l 1 e e 1 d d 1 t
      Number of
      screw holes
      2960.87.050.080 B 50 80 25 30 - 9 15 9 2
      2960.87.050.100 B 50 100 25 50 - 13.5 20 13 2
      2960.87.050.125 B 50 125 25 75 - 13.5 20 13 2
      2960.87.050.160 B 50 160 25 110 - 13.5 20 13 2
      2960.87.050.200 B 50 200 25 150 - 13.5 20 13 2
      2960.87.080.050 D 80 50 25 - 30 9 15 9 2
      2960.87.080.080 B 80 80 25 30 - 13.5 20 13 2
      2960.87.080.100 B 80 100 25 50 - 13.5 20 13 2
      2960.87.080.125 B 80 125 25 75 - 13.5 20 13 2
      2960.87.080.160 B 80 160 25 110 - 13.5 20 13 2
      2960.87.080.200 B 80 200 25 150 - 13.5 20 13 2
      2960.87.080.250 B 80 250 40 170 - 13.5 20 13 2
      2960.87.080.315 B 80 315 40 235 - 13.5 20 13 2
      2960.87.100.050 D 100 50 25 - 50 13.5 20 13 2
      2960.87.100.080 D 100 80 40 - 50 13.5 20 13 2
      2960.87.100.100 B 100 100 25 50 - 13.5 20 13 2
      2960.87.100.125 B 100 125 25 75 - 13.5 20 13 2
      2960.87.100.160 B 100 160 25 110 - 13.5 20 13 2
      2960.87.100.200 B 100 200 25 150 - 13.5 20 13 2
      2960.87.100.250 B 100 250 40 170 - 13.5 20 13 2
      2960.87.100.315 B 100 315 40 235 - 13.5 20 13 2
      2960.87.125.050 D 125 50 25 - 75 13.5 20 13 2
      2960.87.125.080 D 125 80 40 - 75 13.5 20 13 2
      2960.87.125.100 G 125 100 25 50 75 13.5 20 13 3
      2960.87.125.125 G 125 125 25 75 75 13.5 20 13 3
      2960.87.125.160 G 125 160 25 110 75 13.5 20 13 3
      2960.87.125.200 G 125 200 25 150 75 13.5 20 13 3
      2960.87.125.250 G 125 250 40 170 75 13.5 20 13 3
      2960.87.125.315 G 125 315 40 235 75 13.5 20 13 3
      2960.87.160.050 D 160 50 25 - 110 13.5 20 13 2
      2960.87.160.080 D 160 80 40 - 110 13.5 20 13 2
      2960.87.160.100 G 160 100 25 50 110 13.5 20 13 3
      2960.87.160.125 G 160 125 25 75 110 13.5 20 13 3
      2960.87.160.160 G 160 160 25 110 110 13.5 20 13 3
      2960.87.160.200 G 160 200 25 150 110 13.5 20 13 3
      2960.87.160.250 H 160 250 40 170 110 13.5 20 13 4
      2960.87.160.315 H 160 315 40 235 110 13.5 20 13 4
      2960.87. Sliding pad, Steel, VDI 3357
      subject to alterations
      Sliding pad, Steel with sinterlayer, VDI 3357
      Description:
      Steel with sinterlayer is a two-layer material.
      It ensures low maintenance, selflubricating
      service even in arduous multishift
      applications.
      Material:
      Steel plate with sinterlayer,
      part of lubricant 20-25%.
      Note:
      Screws are not included.
      Fixing:
      Use socket cap screws DIN EN ISO 4762.
      H
      1
      l e
      a
      b
      1
      e
      1
      l
      b
      a
      1
      l e
      a
      1
      e
      b
      D B
      G
      1
      l e
      a
      1
      e
      b
      2960.30.
      X
      2960.30.
      D190
      subject to alterations
      Sliding pad, Steel with sinterlayer, VDI 3357
      D191
      Order No Shape b a l 1 e e 1 d d 1 t
      Number of
      screw holes
      2960.30.050.080 B 50 80 25 30 - 9 15 9 2
      2960.30.050.100 B 50 100 25 50 - 13.5 20 13 2
      2960.30.050.125 B 50 125 25 75 - 13.5 20 13 2
      2960.30.050.160 B 50 160 25 110 - 13.5 20 13 2
      2960.30.050.200 B 50 200 25 150 - 13.5 20 13 2
      2960.30.080.050 D 80 50 25 - 30 9 15 9 2
      2960.30.080.080 B 80 80 25 30 - 13.5 20 13 2
      2960.30.080.100 B 80 100 25 50 - 13.5 20 13 2
      2960.30.080.125 B 80 125 25 75 - 13.5 20 13 2
      2960.30.080.160 B 80 160 25 110 - 13.5 20 13 2
      2960.30.080.200 B 80 200 25 150 - 13.5 20 13 2
      2960.30.080.250 B 80 250 40 170 - 13.5 20 13 2
      2960.30.080.315 B 80 315 40 235 - 13.5 20 13 2
      2960.30.100.050 D 100 50 25 - 50 13.5 20 13 2
      2960.30.100.080 D 100 80 40 - 50 13.5 20 13 2
      2960.30.100.100 B 100 100 25 50 - 13.5 20 13 2
      2960.30.100.125 B 100 125 25 75 - 13.5 20 13 2
      2960.30.100.160 B 100 160 25 110 - 13.5 20 13 2
      2960.30.100.200 B 100 200 25 150 - 13.5 20 13 2
      2960.30.100.250 B 100 250 40 170 - 13.5 20 13 2
      2960.30.100.315 B 100 315 40 235 - 13.5 20 13 2
      2960.30.125.050 D 125 50 25 - 75 13.5 20 13 2
      2960.30.125.080 D 125 80 40 - 75 13.5 20 13 2
      2960.30.125.100 G 125 100 25 50 75 13.5 20 13 3
      2960.30.125.125 G 125 125 25 75 75 13.5 20 13 3
      2960.30.125.160 G 125 160 25 110 75 13.5 20 13 3
      2960.30.125.200 G 125 200 25 150 75 13.5 20 13 3
      2960.30.125.250 G 125 250 40 170 75 13.5 20 13 3
      2960.30.125.315 G 125 315 40 235 75 13.5 20 13 3
      2960.30.160.050 D 160 50 25 - 110 13.5 20 13 2
      2960.30.160.080 D 160 80 40 - 110 13.5 20 13 2
      2960.30.160.100 G 160 100 25 50 110 13.5 20 13 3
      2960.30.160.125 G 160 125 25 75 110 13.5 20 13 3
      2960.30.160.160 G 160 160 25 110 110 13.5 20 13 3
      2960.30.160.200 G 160 200 25 150 110 13.5 20 13 3
      2960.30.160.250 H 160 250 40 170 110 13.5 20 13 4
      2960.30.160.315 H 160 315 40 235 110 13.5 20 13 4
      2960.30. Sliding pad, Steel with sinterlayer, VDI 3357
      subject to alterations
      Sliding pad, Bronze with solid lubricant, ISO 9183-1
      Material:
      Bronze with solid lubricant, oilless lubricating
      Note:
      Screws are not included.
      Fixing:
      Use socket cap screws DIN EN ISO 4762 M12.
      e 2
      1
      e
      b
      1
      l
      a
      2
      l
      A
      1
      e
      b
      1
      l
      a
      B
      a
      1
      e
      b
      1
      l
      1
      e
      C
      a
      1
      l
      e 2
      b
      2
      l
      D
      b
      1
      e
      e 2
      a
      1
      l
      2
      l
      E
      a
      1
      e
      b
      e 2
      1
      l
      2
      l
      1
      e
      F
      2960.70.
      X
      ø20
      15°
      R5
      R10
      10
      0,02
      ± 0,025
      20
      ø13,5
      13
      2960.70.
      D192
      subject to alterations
      Sliding pad, Bronze with solid lubricant, ISO 9183-1
      D193
      Order No Shape b a l 1 e 1 l 2 e 2
      2960.70.050.080 B 50 80 20 35 25 -
      2960.70.050.100 B 50 100 20 55 25 -
      2960.70.050.125 B 50 125 20 80 25 -
      2960.70.050.160 B 50 160 20 115 25 -
      2960.70.050.200 B 50 200 20 155 25 -
      2960.70.050.250 C 50 250 20 100 25 -
      2960.70.080.050 D 80 50 25 - 20 40
      2960.70.080.080 E 80 80 20 35 20 40
      2960.70.080.100 E 80 100 20 55 20 40
      2960.70.080.125 E 80 125 20 80 20 40
      2960.70.080.160 A 80 160 20 115 20 40
      2960.70.080.200 A 80 200 20 155 20 40
      2960.70.080.250 F 80 250 20 100 20 40
      2960.70.080.315 F 80 315 20 132 20 40
      2960.70.100.050 D 100 50 25 - 20 60
      2960.70.100.080 E 100 80 20 35 20 60
      2960.70.100.100 E 100 100 20 55 20 60
      2960.70.100.125 A 100 125 20 80 20 60
      2960.70.100.160 A 100 160 20 115 20 60
      2960.70.100.200 A 100 200 20 155 20 60
      2960.70.100.250 F 100 250 20 100 20 60
      2960.70.100.315 F 100 315 20 132 20 60
      2960.70.125.050 D 125 50 25 - 20 85
      2960.70.125.080 E 125 80 20 35 20 85
      2960.70.125.100 A 125 100 20 55 20 85
      2960.70.125.125 A 125 125 20 80 20 85
      2960.70.125.160 A 125 160 20 115 20 85
      2960.70.125.200 A 125 200 20 155 20 85
      2960.70.125.250 F 125 250 20 100 20 85
      2960.70.125.315 F 125 315 20 132 20 85
      2960.70.160.050 D 160 50 25 - 20 120
      2960.70.160.080 A 160 80 20 35 20 120
      2960.70.160.100 A 160 100 20 55 20 120
      2960.70.160.125 A 160 125 20 80 20 120
      2960.70.160.160 A 160 160 20 115 20 120
      2960.70.160.200 A 160 200 20 155 20 120
      2960.70.160.250 F 160 250 20 100 20 120
      2960.70.160.315 F 160 315 20 132 20 120
      2960.70. Sliding pad, Bronze with solid lubricant, ISO 9183-1
      subject to alterations
      Sliding pad, Bronze with solid lubricant
      R2
      ø11
      ø18
      R5
      12
      ± 0,025
      20
      0,02
      DIN 74-
      Km
      2960.85.
      Material:
      Bronze with solid lubricant, oilless lubricating
      Note:
      Screws are not included.
      Fixing:
      Use socket cap screws DIN EN ISO 4762 M10.
      e e
      b b b
      e 1 e 1 e
      a
      a
      a
      3
      e
      3
      e
      3
      e
      A B
      C
      2
      e
      2
      e
      2
      e
      2960.85.
      D194
      Order No Shape b a e e 1 e 2 e 3
      Number of
      screw holes
      2960.85.028.075 A 28 75 14 - 15 45 2
      2960.85.028.100 A 28 100 14 - 25 50 2
      2960.85.028.125 A 28 125 14 - 25 75 2
      2960.85.028.150 A 28 150 14 - 25 100 2
      2960.85.038.075 A 38 75 19 - 15 45 2
      2960.85.038.100 A 38 100 19 - 25 50 2
      2960.85.038.125 A 38 125 19 - 25 75 2
      2960.85.038.150 A 38 150 19 - 25 100 2
      2960.85.038.200 A 38 200 19 - 25 150 2
      2960.85.048.075 A 48 75 24 - 15 45 2
      2960.85.048.100 A 48 100 24 - 25 50 2
      2960.85.048.125 A 48 125 24 - 25 75 2
      2960.85.048.150 A 48 150 24 - 25 100 2
      2960.85.048.200 A 48 200 24 - 25 150 2
      2960.85.058.075 A 58 75 29 - 15 45 2
      2960.85.058.100 A 58 100 29 - 25 50 2
      2960.85.058.150 A 58 150 29 - 25 100 2
      2960.85.075.075.1 A 75 75 37.5 - 15 45 2
      2960.85.075.075 B 75 75 25 25 25 25 2
      2960.85.075.100.1 A 75 100 37.5 - 25 50 2
      2960.85.075.100 B 75 100 25 25 25 50 2
      2960.85.075.125 A 75 125 37.5 - 25 75 2
      2960.85.075.150 A 75 150 37.5 - 25 100 2
      2960.85.075.200 A 75 200 37.5 - 25 150 2
      2960.85.100.100 C 100 100 25 50 25 50 4
      2960.85.100.125 C 100 125 25 50 25 75 4
      2960.85.100.150 C 100 150 25 50 25 100 4
      2960.85.100.200 C 100 200 25 50 25 150 4
      2960.85.100.250 C 100 250 25 50 25 200 4
      2960.85.100.300 C 100 300 25 50 25 250 4
      2960.85.125.125 C 125 125 37.5 50 25 75 4
      2960.85.125.150 C 125 150 37.5 50 25 100 4
      2960.85.125.200 C 125 200 37.5 50 25 150 4
      2960.85.125.250 C 125 250 37.5 50 25 200 4
      2960.85.125.300 C 125 300 37.5 50 25 250 4
      2960.85.125.350 C 125 350 37.5 50 25 300 4
      2960.85.150.150 C 150 150 25 100 25 100 4
      2960.85.150.200 C 150 200 25 100 25 150 4
      2960.85.150.250 C 150 250 25 100 25 200 4
      2960.85.150.300 C 150 300 25 100 25 250 4
      2960.85.200.200 C 200 200 25 150 25 150 4
      2960.85.200.250 C 200 250 25 150 25 200 4
      2960.85.200.300 C 200 300 25 150 25 250 4
      2960.85. Sliding pad, Bronze with solid lubricant
      subject to alterations
      Sliding pad, Bronze with solid lubricant
      R3,5
      2x45°
      B
      B A
      A
      1
      e
      b
      1
      e 25
      b
      100
      a
      25
      25 100
      a
      B A
      2x45°
      R5
      3x45°
      2960.86.
      B - B A - A
      A B
      ø11
      ø17
      R3,5
      R5
      12
      ± 0,025
      20
      3x45°
      2x45° 2x45°
      0,02
      DIN 74-
      Km
      2960.86.
      Material:
      Bronze with solid lubricant,
      oilless lubricating
      Note:
      Screws are not included.
      Fixing:
      Use socket cap screws
      DIN EN ISO 4762 M10.
      D195
      Order No Shape b a e 1
      Number of
      screw holes
      2960.86.038.150 A 38 150 19 2
      2960.86.075.150 A 75 150 37.5 2
      2960.86.100.150 B 100 150 50 4
      2960.86. Sliding pad, Bronze with solid lubricant
      subject to alterations
      Sliding pad, Bronze with solid lubricant
      R2
      25 -0,02
      +0,5
      13
      ø20
      ø14
      R5
      Km 12
      DIN 74
      0,02
      2960.76.
      Material:
      Bronze with solid lubricant,
      oilless lubricating
      Note:
      Screws are not included.
      Fixing:
      Use socket cap screws
      DIN EN ISO 4762 M12.
      3x45°
      3x45°
      b b
      1
      e
      1
      e
      1
      e
      25 25
      25
      25 e e
      e
      a
      a
      B A
      2960.76.
      D196
      Order No Shape b a e e 1
      Number of
      screw holes
      2960.76.080.100 A 80 100 50 30 2
      2960.76.080.125 A 80 125 75 30 2
      2960.76.080.160 A 80 160 110 30 2
      2960.76.080.200 B 80 200 75 15 3
      2960.76.100.125 A 100 125 75 50 2
      2960.76.100.160 A 100 160 110 50 2
      2960.76.100.200 B 100 200 75 25 3
      2960.76.125.125 A 125 125 75 75 2
      2960.76. Sliding pad, Bronze with solid lubricant
      subject to alterations
      Sliding pad, Bronze with solid lubricant, CNOMO
      h
      h
      h
      c
      g
      a
      l
      a
      b
      h
      l
      f
      a
      e
      c
      d
      b
      a
      c
      d
      l
      f
      e
      l
      B
      D
      C
      A
      b
      c
      b
      c 1
      c 2
      h
      1
      h 2
      h 1
      h
      h 1
      1
      2962.78.45.
      0,02
      2x45°
      ø9
      ø16
      10
      0,02
      0
      +0,05
      16
      R3
      ø11
      C, D
      ø9
      R3
      10
      0
      +0,05
      16
      A, B
      ø16
      2x45°
      2962.78.45.
      Material:
      Bronze with solid lubricant,
      oilless lubricating
      Note:
      Screws are not included.
      Fixing:
      Use socket cap screws
      DIN EN ISO 4762 M8.
      D197
      Order No Shape a l b c c 1 c 2 d e f g h h 1 h 2
      Number of
      screw
      counterbores
      Number of
      screw holes
      2962.78.45.050.16.063 A 50 63 15 35 - - - - - - 12 51 - 2 -
      2962.78.45.050.16.160 C 50 160 19 31 - - - - - - 21 147 - 2 -
      2962.78.45.050.16.250 D 50 250 19 31 - - - - - - 21 121237 3 -
      2962.78.45.080.16.160 C 80 160 22 58 - - 68 15 145 - 31 147 - 2 2
      2962.78.45.080.16.250 D 80 250 22 58 - - 68 25 105235 21 121237 3 3
      2962.78.45.100.16.063 B 100 63 15 33 67 85 - - - - 12 51 - 4 -
      2962.78.45. Sliding pad, Bronze with solid lubricant, CNOMO
      subject to alterations
      Sliding pad, Bronze with solid lubricant
      Material:
      Bronze with solid lubricant, oilless lubricating
      Note:
      Screws are not included.
      Fixing:
      Use socket cap screws DIN EN ISO 4762, or
      countersunk cap screws DIN 7991/ISO 10642.
      2962.78.
      l 1 l
      l 1
      e
      e
      e
      a -0,5
      a -0,5
      a -0,5
      a -0,5
      a -0,5
      a -0,5
      a -0,5
      a -0,5
      a -0,5
      a -0,5
      a -0,5
      e 1 e 1 e
      e 1 e
      e 1 e 1 e
      e 1 e 1 e
      A
      B
      C
      D E
      F
      G
      H L M
      I J K
      e 1 e e 1
      e 1 e 1 e 3
      e 1 e 1 e e 3
      e 1 e 1 e 3 e 3
      e 1 e 1 e 3
      e 1 e 1 e
      e 1 e
      b -0,1 b -0,1 b -0,1 b -0,1
      b -0,1 b -0,1 b -0,1
      b -0,1
      b -0,1
      b -0,1 b -0,1
      l 1 l 1 l 1
      l 1 l 1
      1
      l 1
      l 1 l 1
      e 2 e 2
      2
      e
      2
      e
      B
      2
      e
      2
      e
      G
      2
      e
      2
      e
      X
      2962.78.
      d
      R2
      R2
      R2
      I
      J
      K
      15°
      15°
      15°
      5
      1x45°
      t
      s ±0,025
      0,02
      d 1
      d 1
      d 1
      d
      d
      5
      5
      t
      1x45°
      s ±0,025
      0,02
      t
      1x45°
      s ±0,025
      0,02
      d
      1x45°
      t
      1x45°
      0,02
      R2
      d 1
      1x45°
      5
      1x45°
      0,02
      d 1
      s ±0,025 s ±0,025
      90°
      A, B, C, D,
      E, H, L, M
      F + G
      D198
      subject to alterations
      Sliding pad, Bronze with solid lubricant
      D199
      Order No Shape b s a l 1 e e 1 e 2 e 3
      Number of
      screw holes d d 1 t
      2962.78.030.12.0100 A 30 12 100 15 20 60 - - 2 15 9 9
      2962.78.030.12.0160 B 30 12 160 15 20 60 - - 3 15 9 9
      2962.78.030.12.0240 B 30 12 240 15 25 95 - - 3 15 9 9
      2962.78.030.12.0250 B 30 12 250 15 20 105 - - 3 15 9 9
      2962.78.030.12.0300 L 30 12 300 15 25 85 - 80 4 15 9 9
      2962.78.030.12.0350 L 30 12 350 15 25 100 - 100 4 15 9 9
      2962.78.030.12.0400 L 30 12 400 15 25 115 - 120 4 15 9 9
      2962.78.030.12.0450 M 30 12 450 15 25 100 - 100 5 15 9 9
      2962.78.030.12.0500 M 30 12 500 15 25 110 - 115 5 15 9 9
      2962.78.040.08.0100 F 40 8 100 20 20 60 - - 2 - 9 5
      2962.78.040.08.0160 G 40 8 160 20 20 60 - - 3 - 9 5
      2962.78.040.08.0250 G 40 8 250 20 20 105 - - 3 - 9 5
      2962.78.040.12.0100 A 40 12 100 20 20 60 - - 2 15 9 9
      2962.78.040.12.0160 B 40 12 160 20 20 60 - - 3 15 9 9
      2962.78.040.12.0250 B 40 12 250 20 20 105 - - 3 15 9 9
      2962.78.040.16.0100 A 40 16 100 20 20 60 - - 2 18 11 11
      2962.78.040.16.0160 B 40 16 160 20 20 60 - - 3 18 11 11
      2962.78.040.16.0250 B 40 16 250 20 20 105 - - 3 18 11 11
      2962.78.050.20.0100 A 50 20 100 15 20 60 20 - 2 20 13.5 13
      2962.78.050.20.0160 B 50 20 160 15 20 60 10 - 3 20 13.5 13
      2962.78.050.20.0240 A 50 20 240 25 50 140 - - 2 20 13.5 13
      2962.78.050.20.0240.1 K 50 20 240 25 50 140 - - 2 20 13.5 13
      2962.78.050.20.0250 B 50 20 250 15 20 105 10 - 3 20 13.5 13
      2962.78.050.20.0300 B 50 20 300 25 50 100 - - 3 20 13.5 13
      2962.78.050.20.0300.1 J 50 20 300 25 50 100 - - 3 20 13.5 13
      2962.78.050.20.0350 B 50 20 350 25 50 125 - - 3 20 13.5 13
      2962.78.050.20.0350.1 J 50 20 350 25 50 125 - - 3 20 13.5 13
      2962.78.050.20.0400.1 J 50 20 400 25 50 150 - - 3 20 13.5 13
      2962.78.050.20.0450.1 I 50 20 450 25 50 115 - 120 4 20 13.5 13
      2962.78.050.20.0500.1 I 50 20 500 25 50 135 - 130 4 20 13.5 13
      2962.78.060.16.0100 A 60 16 100 15 20 60 30 - 2 18 11 11
      2962.78.060.16.0160 B 60 16 160 15 20 60 15 - 3 18 11 11
      2962.78.060.16.0250 B 60 16 250 15 20 105 15 - 3 18 11 11
      2962.78.080.12.0100 A 80 12 100 20 20 60 40 - 2 15 9 9
      2962.78.080.12.0160 C 80 12 160 20 20 120 40 - 4 15 9 9
      2962.78.080.12.0250 D 80 12 250 20 20 105 20 - 5 15 9 9
      2962.78.080.20.0100 A 80 20 100 20 20 60 40 - 2 20 13.5 13
      2962.78.080.20.0160 C 80 20 160 20 20 120 40 - 4 20 13.5 13
      2962.78.080.20.0250 D 80 20 250 20 20 105 20 - 5 20 13.5 13
      2962.78.080.20.0300 B 80 20 300 40 50 100 - - 3 20 13.5 13
      2962.78.080.20.0300.1 J 80 20 300 40 50 100 - - 3 20 13.5 13
      2962.78.080.20.0350 B 80 20 350 40 50 125 - - 3 20 13.5 13
      2962.78.080.20.0350.1 J 80 20 350 40 50 125 - - 3 20 13.5 13
      2962.78.080.20.0400 B 80 20 400 40 50 150 - - 3 20 13.5 13
      2962.78.080.20.0400.1 J 80 20 400 40 50 150 - - 3 20 13.5 13
      2962.78.080.20.0450 L 80 20 450 40 50 115 - 120 4 20 13.5 13
      2962.78.080.20.0450.1 I 80 20 450 40 50 115 - 120 4 20 13.5 13
      2962.78.080.20.0500 L 80 20 500 40 50 135 - 130 4 20 13.5 13
      2962.78.080.20.0500.1 I 80 20 500 40 50 135 - 130 4 20 13.5 13
      2962.78.100.16.0100 A 100 16 100 20 20 60 60 - 2 18 11 11
      2962.78.100.16.0160 C 100 16 160 20 20 120 60 - 4 18 11 11
      2962.78.100.16.0250 E 100 16 250 20 20 105 60 - 6 18 11 11
      2962.78.125.20.0100 C 125 20 100 20 20 60 85 - 4 20 13.5 13
      2962.78.125.20.0160 C 125 20 160 20 20 120 85 - 4 20 13.5 13
      2962.78.125.20.0250 E 125 20 250 20 20 105 85 - 6 20 13.5 13
      2962.78.125.20.0400 D 125 20 400 25 50 150 37.5 - 5 20 13.5 13
      2962.78.125.20.0450 H 125 20 450 25 50 115 37.5 120 6 20 13.5 13
      2962.78.125.20.0500 H 125 20 500 25 50 135 37.5 130 6 20 13.5 13
      2962.78. Sliding pad, Bronze with solid lubricant
      subject to alterations
      Sliding pad, Steel, CNOMO
      2x45°
      ±0,025 17
      0,02
      11
      1x45°
      ø18
      M10
      ø11
      2962.84.45.
      Material:
      Steel, surface hardened
      Note:
      Screws are not included.
      Fixing:
      Use socket cap screws
      DIN EN ISO 4762 M10.
      16
      234
      125
      12 12
      16
      144
      a
      a
      1
      l
      1
      l
      b b
      A
      B
      2962.84.45.
      D200
      Order No Shape b a l 1
      Number of
      screw
      counterbores
      Number of
      threads
      2962.84.45.050.17.160 A 50 160 38 2 2
      2962.84.45.050.17.250 B 50 250 38 3 3
      2962.84.45.080.17.160 A 80 160 68 2 2
      2962.84.45.080.17.250 B 80 250 68 3 3
      2962.84.45. Sliding pad, Steel, CNOMO
      subject to alterations
      Sliding pad, Steel with solid lubricant
      e
      e
      e
      e
      e
      e 3
      e 3
      e 1
      e 1
      a
      a
      a
      a
      a
      l 1 l 1
      l 1 l 1 l 1
      b b
      b b b
      A B D
      H L
      e 1
      e 1 e 1
      e 1
      e 1 e 1
      e 1
      e 2
      e 2
      e 2
      e 2
      2962.85.
      d
      1x45°
      t
      s
      1x45°
      0,02
      R2
      d 1
      2962.85.
      Material:
      Steel, surface hardened. Sliding
      faces with embedded solid
      lubricant.
      Note:
      Screws are not included.
      Fixing:
      Use socket cap screws
      DIN EN ISO 4762 M12.
      D201
      Order No Shape b s a l 1 e e 1 e 2 e 3
      Number of
      screw holes d 1 d t
      2962.85.050.20.0240 A 50 20 240 25 50 140 - - 2 13.5 20 13
      2962.85.050.20.0300 B 50 20 300 25 50 100 - - 3 13.5 20 13
      2962.85.050.20.0350 B 50 20 350 25 50 125 - - 3 13.5 20 13
      2962.85.080.20.0300 B 80 20 300 40 50 100 - - 3 13.5 20 13
      2962.85.080.20.0350 B 80 20 350 40 50 125 - - 3 13.5 20 13
      2962.85.080.20.0400 B 80 20 400 40 50 150 - - 3 13.5 20 13
      2962.85.080.20.0450 L 80 20 450 40 50 115 - 120 4 13.5 20 13
      2962.85.080.20.0500 L 80 20 500 40 50 135 - 130 4 13.5 20 13
      2962.85.125.20.0400 D 125 20 400 25 50 150 37.5 - 5 13.5 20 13
      2962.85.125.20.0450 H 125 20 450 25 50 115 37.5 120 6 13.5 20 13
      2962.85.125.20.0500 H 125 20 500 25 50 135 37.5 130 6 13.5 20 13
      2962.85. Sliding pad, Steel with solid lubricant
      subject to alterations
      Sliding pad, Bronze with solid lubricant, NAAMS
      +0,5
      ±0,025
      ø13,5
      13
      15°
      10
      ø20
      R5
      30°
      3x45°
      20
      Km 12
      DIN 74
      0,02 A
      0,1 A
      A
      2960.79.
      Material:
      Bronze with solid lubricant,
      oilless lubricating
      Note:
      Screws are not included.
      Fixing:
      Use socket cap screws
      DIN EN ISO 4762 M12.
      3
      e
      2
      e
      1
      e
      3
      e
      2
      e
      3
      e
      3
      e
      e
      e
      e e
      l 3 l 3 l 2 l 3
      l 3 l 1
      l 1 l 1 l 1
      b b b
      b
      a
      a
      a a
      A B C
      D
      2960.79.
      D202
      Order No Shape b a l 1 l 2 l 3 e e 1 e 2 e 3
      Number of
      screw holes
      2960.79.050.100 A 50 100 25 - - 30 - - 30 2
      2960.79.050.150 A 50 150 25 - - 30 - - 80 2
      2960.79.050.200 A 50 200 25 - - 40 - - 120 2
      2960.79.080.100 A 80 100 20 - 40 30 - - 30 2
      2960.79.080.150 A 80 150 20 - 40 30 - - 80 2
      2960.79.080.200 A 80 200 20 - 40 40 - - 120 2
      2960.79.080.250 A 80 250 20 - 40 40 - - 170 2
      2960.79.080.315 B 80 315 20 20 20 40 - 210 25 3
      2960.79.100.050 D 100 50 22 - 56 14 - - 13 2
      2960.79.100.080 D 100 80 22 - 56 30 - - 20 2
      2960.79.100.100 A 100 100 22 - 56 30 - - 30 2
      2960.79.100.150 A 100 150 22 - 56 30 - - 80 2
      2960.79.100.200 B 100 200 22 28 28 40 - 95 25 3
      2960.79.100.250 B 100 250 22 28 28 40 - 145 25 3
      2960.79.100.315 B 100 315 22 28 28 40 - 210 25 3
      2960.79.125.080 D 125 80 25 - 75 30 - - 20 2
      2960.79.125.100 A 125 100 25 - 75 30 - - 30 2
      2960.79.125.150 A 125 150 25 - 75 30 - - 80 2
      2960.79.125.200 B 125 200 25 37 38 40 - 95 25 3
      2960.79.125.250 B 125 250 25 37 38 40 - 145 25 3
      2960.79.125.315 C 125 315 25 - 75 40 25 165 25 4
      2960.79.160.100 A 160 100 30 - 100 30 - - 30 2
      2960.79.160.150 A 160 150 30 - 100 30 - - 80 2
      2960.79.160.200 B 160 200 30 50 50 40 - 95 25 3
      2960.79.160.250 C 160 250 30 - 100 40 25 120 25 4
      2960.79.160.315 C 160 315 30 - 100 40 25 185 25 4
      2960.79. Sliding pad, Bronze with solid lubricant, NAAMS
      subject to alterations
      Sliding pad, Steel, NAAMS
      3
      e
      2
      e
      1
      e
      3
      e
      2
      e
      3
      e
      3
      e
      e
      e
      e e
      l 3 l 3 l 2 l 3
      l 3 l 1
      l 1 l 1 l 1
      b b b
      b
      a
      a
      a a
      D
      2960.80.
      A B C
      +0,5
      ±0,025
      13
      15°
      10
      ø13,5
      ø20
      R5
      30°
      3x45°
      20
      Km 12
      DIN 74
      0,02 A
      0,1 A
      A
      2960.80.
      Material:
      Steel, surface hardened
      Note:
      Screws are not included.
      Fixing:
      Use socket cap screws
      DIN EN ISO 4762 M12.
      D203
      Order No Shape b a l 1 l 2 l 3 e e 1 e 2 e 3
      Number of
      screw holes
      2960.80.050.100 A 50 100 25 - - 30 - - 30 2
      2960.80.050.150 A 50 150 25 - - 30 - - 80 2
      2960.80.050.200 A 50 200 25 - - 40 - - 120 2
      2960.80.080.100 A 80 100 20 - 40 30 - - 30 2
      2960.80.080.150 A 80 150 20 - 40 30 - - 80 2
      2960.80.080.200 A 80 200 20 - 40 40 - - 120 2
      2960.80.080.250 A 80 250 20 - 40 40 - - 170 2
      2960.80.080.315 B 80 315 20 20 20 40 - 210 25 3
      2960.80.100.050 D 100 50 22 - 56 14 - - 13 2
      2960.80.100.080 D 100 80 22 - 56 30 - - 20 2
      2960.80.100.100 A 100 100 22 - 56 30 - - 30 2
      2960.80.100.150 A 100 150 22 - 56 30 - - 80 2
      2960.80.100.200 B 100 200 22 28 28 40 - 95 25 3
      2960.80.100.250 B 100 250 22 28 28 40 - 145 25 3
      2960.80.100.315 B 100 315 22 28 28 40 - 210 25 3
      2960.80.125.080 D 125 80 25 - 75 30 - - 20 2
      2960.80.125.100 A 125 100 25 - 75 30 - - 30 2
      2960.80.125.150 A 125 150 25 - 75 30 - - 80 2
      2960.80.125.200 B 125 200 25 37 38 40 - 95 25 3
      2960.80.125.250 B 125 250 25 37 38 40 - 145 25 3
      2960.80.125.315 C 125 315 25 - 75 40 25 165 25 4
      2960.80.160.100 A 160 100 30 - 100 30 - - 30 2
      2960.80.160.150 A 160 150 30 - 100 30 - - 80 2
      2960.80.160.200 B 160 200 30 50 50 40 - 95 25 3
      2960.80.160.250 C 160 250 30 - 100 40 25 120 25 4
      2960.80.160.315 C 160 315 30 - 100 40 25 185 25 4
      2960.80. Sliding pad, Steel, NAAMS
      subject to alterations
      Sliding pad, Bronze with solid lubricant, AFNOR/ISO 9183-2
      Material:
      Bronze with solid lubricant, oilless lubricating
      Note:
      Screws are not included.
      Fixing:
      Use socket cap screws DIN EN ISO 4762 M10.
      e
      e
      20
      20
      20
      20
      20
      20
      20
      20
      e 2
      b
      b
      a
      A
      a
      a
      a
      a
      a
      a
      a
      a
      b
      b
      b
      b
      b
      b
      b
      25
      25
      25
      25
      25
      25
      25
      25
      25
      e 1
      e 2
      e 1
      e 1
      e 1
      e 1
      e 1
      e 2
      e 2
      e 1
      e 1 e 1
      e 1 e 1
      e 3
      e 3
      e 2 e 1 e 1
      e 4 e 4
      e e
      e
      e e e
      e e e e
      e e e e e
      20
      B C
      D
      E
      F
      G
      H
      I
      2960.74.
      X
      2960.74.
      30°
      14
      R 10
      12
      ø11
      ø20
      0,02
      ± 0,01
      20
      DIN 74 - Km
      D204
      subject to alterations
      Sliding pad, Bronze with solid lubricant, AFNOR/ISO 9183-2
      D205
      Order No Shape b a e e 1 e 2 e 3 e 4
      Number of
      screw holes
      2960.74.070.100 A 70 100 50 20 - - - 2
      2960.74.070.150 B 70 150 50 10 20 - - 3
      2960.74.070.200 D 70 200 50 20 - - - 4
      2960.74.100.100 I 100 100 - 30 20 - 25 3
      2960.74.100.150 C 100 150 25 50 - 50 - 4
      2960.74.100.200 D 100 200 50 50 - - - 4
      2960.74.100.250 E 100 250 50 50 - - - 5
      2960.74.100.300 F 100 300 50 50 - - - 6
      2960.74.150.100 G 150 100 - 25 50 50 - 4
      2960.74.150.150 H 150 150 - 25 50 - - 4
      2960.74.150.200 D 150 200 50 100 - - - 4
      2960.74.150.250 E 150 250 50 100 - - - 5
      2960.74.150.300 F 150 300 50 100 - - - 6
      2960.74.200.100 G 200 100 - 50 50 50 - 4
      2960.74. Sliding pad, Bronze with solid lubricant, AFNOR/ISO 9183-2
      subject to alterations
      Sliding pad, Special cast iron (GG25) with solid lubricant,
      AFNOR/ISO 9183- 2
      Description:
      Special cast iron with solid lubricant is a low-
      cost alternative, altthough absorption of the
      surface pressure is reduced by 60%.
      Material:
      Special cast iron (GG25) with solid lubricant.
      Note:
      Screws are not included.
      Fixing:
      Use socket cap screws DIN EN ISO 4762 M10.
      e
      e
      20
      20
      20
      20
      20
      20
      20
      20
      e 2
      b
      b
      a
      A
      a
      a
      a
      a
      a
      a
      a
      a
      b
      b
      b
      b
      b
      b
      b
      25
      25
      25
      25
      25
      25
      25
      25
      25
      e 1
      e 2
      e 1
      e 1
      e 1
      e 1
      e 1
      e 2
      e 2
      e 1
      e 1 e 1
      e 1 e 1
      e 3
      e 3
      e 2 e 1 e 1
      e 4 e 4
      e e
      e
      e e e
      e e e e
      e e e e e
      20
      B C
      D
      E
      F
      G
      H
      I
      2960.75.
      X
      2960.75.
      ± 0,25
      21
      30°
      14
      R 10
      12
      ø11
      ø20
      0,02
      DIN 74 - Km
      D206
      subject to alterations
      Sliding pad, Special cast iron (GG25) with solid lubricant,
      AFNOR/ISO 9183- 2
      D207
      Order No Shape b a e e 1 e 2 e 3 e 4
      Number of
      screw holes
      2960.75.070.100 A 70 100 50 20 - - - 2
      2960.75.070.150 B 70 150 50 10 20 - - 3
      2960.75.070.200 D 70 200 50 20 - - - 4
      2960.75.100.100 I 100 100 - 30 20 - 25 3
      2960.75.100.150 C 100 150 25 50 - 50 - 4
      2960.75.100.200 D 100 200 50 50 - - - 4
      2960.75.100.250 E 100 250 50 50 - - - 5
      2960.75.100.300 F 100 300 50 50 - - - 6
      2960.75.150.100 G 150 100 - 25 50 50 - 4
      2960.75.150.150 H 150 150 - 25 50 - - 4
      2960.75.150.200 D 150 200 50 100 - - - 4
      2960.75.150.250 E 150 250 50 100 - - - 5
      2960.75.150.300 F 150 300 50 100 - - - 6
      2960.75.200.100 G 200 100 - 50 50 50 - 4
      2960.75. Sliding pad, Special cast iron (GG25) with solid lubricant, AFNOR/ISO 9183-2
      subject to alterations
      Sliding pad, Steel with oil groove, CNOMO
      Material:
      Steel, surface hardened
      Note:
      Screws are not included.
      Fixing:
      Use socket cap screws DIN EN ISO 4762 M10.
      25
      1
      e
      70
      9
      e
      25
      1
      e
      45
      25
      145
      1
      e
      b
      a
      a
      b
      b
      b
      a
      a
      25
      1
      e
      25
      95
      9
      e
      1
      e
      2
      e
      25
      45
      20
      25
      70
      20
      25
      9
      e
      4
      e
      A
      1
      e
      9
      e
      a
      5
      e
      4
      e
      6
      e
      5
      e
      4
      e
      1
      e
      9
      e
      45
      20
      B C
      5
      e
      4
      e
      6
      e
      9
      e
      20
      D
      145
      5
      e
      4
      e
      6
      e
      7
      e
      20
      b
      E
      1
      e
      5
      e
      4
      e
      6
      e
      7
      e
      8
      e
      20
      a
      b
      9
      e
      F
      2
      e
      3
      e
      9
      e
      4
      e
      20
      a
      b
      G
      2
      e
      3
      e
      5
      e
      6
      e
      20
      a
      4
      e
      b
      25
      1
      e
      H
      2
      e
      5
      e
      4
      e
      a
      20
      32,5
      b
      9
      e
      I
      2960.44.45.
      X
      2960.44.45.
      14
      3x45°
      ±0,25 21
      ø7
      ø11
      ø20
      30°
      R10
      0,02
      D208
      subject to alterations
      Sliding pad, Steel with oil groove, CNOMO
      D209
      Order No Shape b a e 1 e 2 e 3 e 4 e 5 e 6 e 7 e 8 e 9
      Number of
      screw holes
      2960.44.45.070.100 A 70 100 20 - - 70 - - - - 10 2
      2960.44.45.070.150 B 70 150 10 20 - 70 120 - - - 10 3
      2960.44.45.070.200 D 70 200 20 - - 70 120 170 - - 10 4
      2960.44.45.100.100 I 100 100 30 50 - 45 70 - - - 25 3
      2960.44.45.100.150 C 100 150 50 - - 45 95 120 - - 25 4
      2960.44.45.100.200 D 100 200 50 - - 70 120 170 - - 25 4
      2960.44.45.100.250 E 100 250 50 - - 70 120 170 220 - 25 5
      2960.44.45.100.300 F 100 300 50 - - 70 120 170 220 270 25 6
      2960.44.45.150.100 G 150 100 25 75 100 70 - - - - 50 4
      2960.44.45.150.150 H 150 150 25 75 100 45 95 120 - - 50 4
      2960.44.45.150.200 D 150 200 100 - - 70 120 170 - - 50 4
      2960.44.45.150.250 E 150 250 100 - - 70 120 170 220 - 50 5
      2960.44.45.150.300 F 150 300 100 - - 70 120 170 220 270 50 6
      2960.44.45.200.100 G 200 100 50 100 150 70 - - - - 75 4
      2960.44.45. Sliding pad, Steel with oil groove, CNOMO
      subject to alterations
      Sliding pad, Bronze with oil groove, CNOMO
      14
      3x45°
      ±0,01 20
      ø7
      ø11
      ø20
      12
      30°
      R10
      0,02
      2960.54.45.
      Material:
      Bronze
      Note:
      Screws are not included.
      Fixing:
      Use socket cap screws
      DIN EN ISO 4762 M10.
      A
      9
      e
      1
      e
      b
      25
      45
      20
      4
      e
      a
      9
      e
      1
      e
      2
      e
      3
      e
      b
      25
      70
      20
      4
      e
      a
      6
      e
      5
      e
      1
      e
      45
      20
      a
      4
      e
      5
      e
      25
      2
      e
      b
      32,5
      20
      4
      e
      a
      5
      e
      b
      9
      e
      2
      e
      25
      1
      e
      H
      B
      I
      9
      e
      2960.54.45.
      D210
      Order No Shape b a e 1 e 2 e 3 e 4 e 5 e 6 e 9
      Number of
      screw holes
      2960.54.45.070.100 A 70 100 20 - - 70 - - 10 2
      2960.54.45.070.150 B 70 150 10 20 - 70 120 - 10 3
      2960.54.45.100.100 I 100 100 30 50 - 45 70 - 25 3
      2960.54.45.150.150 H 150 150 25 75 100 45 95 120 50 4
      2960.54.45. Sliding pad, Bronze with oil groove, CNOMO
      subject to alterations
      Sliding pad, Bronze with solid lubricant, VDI 3357
      A
      25 e
      a
      b
      10
      ø15
      ø9
      9
      Km 8
      DIN 74
      15°
      3x45°
      12 -0,02
      0,02
      12 -0,02
      Km 8
      DIN 74
      15°
      9
      3x45°
      0,02
      ø9
      ø15
      10
      25 e 1 e e
      a
      b
      B
      2960.81.
      Material:
      Bronze with solid lubricant, oilless lubricating
      Note:
      Screws are not included.
      Fixing:
      Use socket cap screws DIN EN ISO 4762 M8.
      D211
      Order No Shape b a e e 1
      Number of
      screw holes
      2960.81.030.080 A 30 80 30 - 2
      2960.81.030.100 A 30 100 50 - 2
      2960.81.030.125 A 30 125 75 - 2
      2960.81.030.160 A 30 160 110 - 2
      2960.81.030.200 A 30 200 150 - 2
      2960.81.030.225 A 30 225 175 - 2
      2960.81.030.250 B 30 250 60 80 4
      2960.81.030.260 B 30 260 60 90 4
      2960.81.030.280 B 30 280 60 110 4
      2960.81.030.300 B 30 300 80 90 4
      2960.81.030.320 B 30 320 80 110 4
      2960.81.040.080 A 40 80 30 - 2
      2960.81.040.100 A 40 100 50 - 2
      2960.81.040.125 A 40 125 75 - 2
      2960.81.040.160 A 40 160 110 - 2
      2960.81.040.200 A 40 200 150 - 2
      2960.81.050.080 A 50 80 30 - 2
      2960.81.050.100 A 50 100 50 - 2
      2960.81.050.125 A 50 125 75 - 2
      2960.81.050.160 A 50 160 110 - 2
      2960.81.050.200 A 50 200 150 - 2
      2960.81.050.225 A 50 225 175 - 2
      2960.81.050.250 B 50 250 60 80 4
      2960.81.050.300 B 50 300 80 90 4
      2960.81.050.350 B 50 350 100 100 4
      2960.81.050.400 B 50 400 120 110 4
      2960.81.060.080 A 60 80 30 - 2
      2960.81.060.100 A 60 100 50 - 2
      2960.81.060.125 A 60 125 75 - 2
      2960.81.060.160 A 60 160 110 - 2
      2960.81.060.200 A 60 200 150 - 2
      2960.81.060.225 A 60 225 175 - 2
      2960.81.060.240 B 60 240 60 70 4
      2960.81.060.250 B 60 250 60 80 4
      2960.81.060.260 B 60 260 60 90 4
      2960.81.060.280 B 60 280 60 110 4
      2960.81.080.080 A 80 80 30 - 2
      2960.81.080.100 A 80 100 50 - 2
      2960.81.080.125 A 80 125 75 - 2
      2960.81.080.160 A 80 160 110 - 2
      2960.81.080.200 A 80 200 150 - 2
      2960.81.080.225 A 80 225 175 - 2
      2960.81.080.240 B 80 240 60 70 4
      2960.81.080.250 B 80 250 60 80 4
      2960.81.080.260 B 80 260 60 90 4
      2960.81.080.280 B 80 280 60 110 4
      2960.81.100.240 B 100 240 60 70 4
      2960.81.100.260 B 100 260 60 90 4
      2960.81.100.280 B 100 280 60 110 4
      2960.81. Sliding pad, Bronze with solid lubricant, VDI 3357
      subject to alterations
      Sliding pad, Steel, VDI 3357
      Material:
      Steel, surface hardened
      Note:
      Screws are not included.
      Fixing:
      Use socket cap screws DIN EN ISO 4762 M8.
      10
      ø15
      ø9
      25 e
      a
      b
      9
      15°
      3x45°
      12
      A
      -0,02
      0,02
      15°
      9
      ø9
      ø15
      10
      12 -0,02
      3x45°
      0,02
      25 e e e 1
      b
      a
      2960.88.
      B
      X
      D212
      subject to alterations
      Sliding pad, Steel, VDI 3357
      D213
      Order No Shape b a e e 1
      Number of
      screw holes
      2960.88.030.080 A 30 80 30 - 2
      2960.88.030.100 A 30 100 50 - 2
      2960.88.030.125 A 30 125 75 - 2
      2960.88.030.160 A 30 160 110 - 2
      2960.88.030.200 A 30 200 150 - 2
      2960.88.040.080 A 40 80 30 - 2
      2960.88.040.100 A 40 100 50 - 2
      2960.88.040.125 A 40 125 75 - 2
      2960.88.040.160 A 40 160 110 - 2
      2960.88.040.200 A 40 200 150 - 2
      2960.88.040.225 A 40 225 175 - 2
      2960.88.040.240 B 40 240 60 70 4
      2960.88.040.250 B 40 250 60 80 4
      2960.88.040.260 B 40 260 60 90 4
      2960.88.040.280 B 40 280 60 110 4
      2960.88.050.080 A 50 80 30 - 2
      2960.88.050.100 A 50 100 50 - 2
      2960.88.050.125 A 50 125 75 - 2
      2960.88.050.160 A 50 160 110 - 2
      2960.88.050.180 A 50 180 130 - 2
      2960.88.050.200 A 50 200 150 - 2
      2960.88.050.225 A 50 225 175 - 2
      2960.88.050.240 B 50 240 60 70 4
      2960.88.050.250 B 50 250 60 80 4
      2960.88.050.260 B 50 260 60 90 4
      2960.88.050.280 B 50 280 60 110 4
      2960.88.060.080 A 60 80 30 - 2
      2960.88.060.100 A 60 100 50 - 2
      2960.88.060.125 A 60 125 75 - 2
      2960.88.060.160 A 60 160 110 - 2
      2960.88.060.200 A 60 200 150 - 2
      2960.88.060.225 A 60 225 175 - 2
      2960.88.060.240 B 60 240 60 70 4
      2960.88.060.250 B 60 250 60 80 4
      2960.88.060.260 B 60 260 60 90 4
      2960.88.060.280 B 60 280 60 110 4
      2960.88.060.300 B 60 300 80 90 4
      2960.88.060.320 B 60 320 80 110 4
      2960.88.060.340 B 60 340 80 130 4
      2960.88.060.350 B 60 350 100 100 4
      2960.88.080.080 A 80 80 30 - 2
      2960.88.080.100 A 80 100 50 - 2
      2960.88.080.125 A 80 125 75 - 2
      2960.88.080.160 A 80 160 110 - 2
      2960.88.080.200 A 80 200 150 - 2
      2960.88.080.225 A 80 225 175 - 2
      2960.88.080.240 B 80 240 60 70 4
      2960.88.080.250 B 80 250 60 80 4
      2960.88.080.260 B 80 260 60 90 4
      2960.88.080.280 B 80 280 60 110 4
      2960.88.080.300 B 80 300 80 90 4
      2960.88.080.320 B 80 320 80 110 4
      2960.88.080.340 B 80 340 80 130 4
      2960.88.080.350 B 80 350 100 100 4
      2960.88.100.250 B 100 250 60 80 4
      2960.88.100.280 B 100 280 60 110 4
      2960.88.100.300 B 100 300 80 90 4
      2960.88.100.320 B 100 320 80 110 4
      2960.88.100.340 B 100 340 80 130 4
      2960.88.100.350 B 100 350 100 100 4
      2960.88. Sliding pad, Steel, VDI 3357
      subject to alterations
      Sliding pad, Bronze with solid lubricant, VDI 3357
      Material:
      Bronze with solid lubricant,
      oilless lubricating
      Note:
      Screws are not included.
      Fixing:
      Use socket cap screws
      DIN EN ISO 4762 M12.
      2
      l
      25 25
      10
      b
      13
      3x45°
      20 - 0,02
      0,02
      15°
      1
      l
      2
      l
      ø13,5
      ø20
      R5
      2960.93.
      D214
      Order No b l 1 l 2
      2960.93.050.250 50 250 60
      2960.93.050.300 50 300 80
      2960.93.050.350 50 350 100
      2960.93.050.400 50 400 120
      2960.93.050.450 50 450 140
      2960.93.050.500 50 500 150
      2960.93.080.250 80 250 60
      2960.93.080.300 80 300 80
      2960.93.080.350 80 350 100
      2960.93.080.400 80 400 120
      2960.93.080.450 80 450 140
      2960.93.080.500 80 500 150
      2960.93.100.250 100 250 60
      2960.93.100.300 100 300 80
      2960.93.100.350 100 350 100
      2960.93.100.400 100 400 120
      2960.93.100.450 100 450 140
      2960.93.100.500 100 500 150
      2960.93.125.250 125 250 60
      2960.93.125.300 125 300 80
      2960.93.125.350 125 350 100
      2960.93.125.400 125 400 120
      2960.93.125.450 125 450 140
      2960.93.125.500 125 500 150
      2960.93.160.250 160 250 60
      2960.93.160.300 160 300 80
      2960.93.160.350 160 350 100
      2960.93.160.400 160 400 120
      2960.93.160.450 160 450 140
      2960.93.160.500 160 500 150
      2960.93. Sliding pad, Bronze with solid lubricant, VDI 3357
      subject to alterations
      Guide bar with two sliding surfaces, Bronze with solid lubricant, VDI 3357
      1
      b
      1
      b
      d
      t
      a
      e e
      15°
      s
      10°
      5
      a
      e 25
      b
      0,02
      5
      25
      b
      A
      B
      - 0,02
      d 1
      3x45°
      2962.75.
      Material:
      Bronze with solid lubricant, oilless lubricating
      Note:
      Screws are not included.
      Fixing:
      Use socket cap screws
      DIN EN ISO 4762.
      D215
      Order No Shape a b s b 1 e d d 1 t
      Number of
      screw holes
      2962.75.025.012.0110 A 110 25 12 12.5 60 15 9 8.5 2
      2962.75.025.012.0120 A 120 25 12 12.5 70 15 9 8.5 2
      2962.75.025.015.0110 A 110 25 15 12.5 60 18 11 10.5 2
      2962.75.025.015.0120 A 120 25 15 12.5 70 18 11 10.5 2
      2962.75.060.030.0125 A 125 60 30 30 75 20 13.5 13 2
      2962.75.060.030.0150 A 150 60 30 30 100 20 13.5 13 2
      2962.75.060.030.0160 A 160 60 30 30 110 20 13.5 13 2
      2962.75.060.030.0200 B 200 60 30 30 75 20 13.5 13 3
      2962.75.060.040.0125 A 125 60 40 30 75 20 13.5 13 2
      2962.75.060.040.0150 A 150 60 40 30 100 20 13.5 13 2
      2962.75.060.040.0160 A 160 60 40 30 110 20 13.5 13 2
      2962.75.060.040.0200 B 200 60 40 30 75 20 13.5 13 3
      2962.75. Guide bar with two sliding surfaces, Bronze with solid lubricant, VDI 3357
      subject to alterations
      Guide bar with two sliding surfaces, Bronze with solid lubricant, CNOMO
      ø16
      ø9
      10
      +0,01
      20
      0
      0,02
      2x45°
      2962.75.45.
      Material:
      Bronze with solid lubricant,
      oilless lubricating
      Note:
      Screws are not included.
      Fixing:
      Use socket cap screws
      DIN EN ISO 4762 M8.
      31 31
      a a
      l
      237
      21
      l
      147
      21
      A
      121
      19 19
      R3,5
      R3,5
      B
      2962.75.45.
      D216
      Order No Shape a l
      Number of
      screw holes
      2962.75.45.050.20.160 A 50 160 2
      2962.75.45.050.20.250 B 50 250 3
      2962.75.45. Guide bar with two sliding surfaces, Bronze with solid
      lubricant, CNOMO
      subject to alterations
      Guide bar with three sliding surfaces, Bronze with solid lubricant
      15°
      15°
      l 1 l 1
      a
      e e
      ± 0,02
      s
      5
      a
      e 25
      b
      0,01
      DIN 74 - Km
      5
      25
      b
      B
      A t
      d 1
      d
      2962.76.
      Material:
      Bronze with solid lubricant, oilless lubricating
      Note:
      Screws are not included.
      Fixing:
      Use socket cap screws DIN EN ISO 4762.
      D217
      Order No Shape a b s e l 1 d d 1 t
      Number of
      screw holes
      2962.76.070.032.0125 A 125 70 32 75 40 20 13.5 13 2
      2962.76.070.032.0150 A 150 70 32 100 40 20 13.5 13 2
      2962.76.070.032.0200 B 200 70 32 75 40 20 13.5 13 3
      2962.76.090.045.0125 A 125 90 45 75 55 26 17.5 17.5 2
      2962.76.090.045.0150 B 150 90 45 50 55 26 17.5 17.5 3
      2962.76.090.045.0200 B 200 90 45 75 55 26 17.5 17.5 3
      2962.76. Guide bar with three sliding surfaces, Bronze with solid lubricant
      subject to alterations
      Guide bar with two sliding surfaces, Bronze with solid lubricant
      Material:
      Bronze with solid lubricant, oilless lubricating
      Note:
      Screws are not included.
      l
      b
      s ±0,1
      ø16
      17
      e 3 e 2 e 1 20
      3x45°
      min
      30
      2962.77.
      D218
      Order No b s l e 1 e 2 e 3
      Number of
      screw holes
      2962.77.065.040.0150 65 40 150 110 - - 2
      2962.77.065.040.0200 65 40 200 80 80 - 3
      2962.77.065.040.0250 65 40 250 105 105 - 3
      2962.77.065.040.0300 65 40 300 90 80 90 4
      2962.77.065.040.0350 65 40 350 105 100 105 4
      2962.77.065.065.0150 65 65 150 110 - - 2
      2962.77.065.065.0200 65 65 200 80 80 - 3
      2962.77.065.065.0250 65 65 250 105 105 - 3
      2962.77.065.065.0300 65 65 300 90 80 90 4
      2962.77.065.065.0350 65 65 350 105 105 105 4
      2962.77. Guide bar with two sliding surfaces, Bronze with solid lubricant
      subject to alterations
      Guide bar with four sliding surfaces, Bronze with solid lubricant
      l ±1
      l 3
      2
      l
      2
      l
      2
      l
      3
      l
      1
      l
      1
      l
      1
      l
      1
      l
      c
      ± 0,025
      b
      ± 0,025
      a
      300 0,02
      0,02/300
      2962.74.
      Material:
      Bronze with solid lubricant, oilless lubricating
      D219
      Order No a b c l l 1 l 2 l 3
      2962.74.015.010.075 10.3 15.3 6 75 25 6 3
      2962.74.015.010.100 10.3 15.3 6 100 25 6 3
      2962.74.015.010.125 10.3 15.3 6 125 25 6 3
      2962.74.015.010.150 10.3 15.3 6 150 25 6 3
      2962.74.015.010.175 10.3 15.3 6 175 25 6 3
      2962.74.015.010.200 10.3 15.3 6 200 25 6 3
      2962.74.015.010.225 10.3 15.3 6 225 25 6 3
      2962.74.015.010.250 10.3 15.3 6 250 25 6 3
      2962.74.015.010.275 10.3 15.3 6 275 25 6 3
      2962.74.015.010.300 10.3 15.3 6 300 25 6 3
      2962.74.025.015.105 15.3 25.3 8 105 35 8 4
      2962.74.025.015.140 15.3 25.3 8 140 35 8 4
      2962.74.025.015.175 15.3 25.3 8 175 35 8 4
      2962.74.025.015.210 15.3 25.3 8 210 35 8 4
      2962.74.025.015.245 15.3 25.3 8 245 35 8 4
      2962.74.025.015.280 15.3 25.3 8 280 35 8 4
      2962.74.025.015.315 15.3 25.3 8 315 35 8 4
      2962.74.025.015.350 15.3 25.3 8 350 35 8 4
      2962.74.025.015.385 15.3 25.3 8 385 35 8 4
      2962.74.025.015.420 15.3 25.3 8 420 35 8 4
      2962.74.025.015.455 15.3 25.3 8 455 35 8 4
      2962.74.025.015.490 15.3 25.3 8 490 35 8 4
      2962.74.035.025.135 25.3 35.3 12 135 45 10 5
      2962.74.035.025.180 25.3 35.3 12 180 45 10 5
      2962.74.035.025.225 25.3 35.3 12 225 45 10 5
      2962.74.035.025.270 25.3 35.3 12 270 45 10 5
      2962.74.035.025.315 25.3 35.3 12 315 45 10 5
      2962.74.035.025.360 25.3 35.3 12 360 45 10 5
      2962.74.035.025.405 25.3 35.3 12 405 45 10 5
      2962.74.035.025.450 25.3 35.3 12 450 45 10 5
      2962.74.035.025.495 25.3 35.3 12 495 45 10 5
      2962.74.045.035.165 35.3 45.3 16 165 55 12 6
      2962.74.045.035.220 35.3 45.3 16 220 55 12 6
      2962.74.045.035.275 35.3 45.3 16 275 55 12 6
      2962.74.045.035.330 35.3 45.3 16 330 55 12 6
      2962.74.045.035.385 35.3 45.3 16 385 55 12 6
      2962.74.045.035.440 35.3 45.3 16 440 55 12 6
      2962.74.045.035.495 35.3 45.3 16 495 55 12 6
      2962.74. Guide bar with four sliding surfaces, Bronze with
      solid lubricant
      subject to alterations
      Guide bar with one sliding surfaces, Bronze with solid lubricant
      Material:
      Bronze with solid lubricant,
      oilless lubricating
      Note:
      Screws are not included.
      e 2 e 1 e 1
      e 1 e 1 25
      25
      a
      a
      e
      0,5x45°
      e
      ød
      ød
      R3
      0,02 0,02
      R3
      0,5x45°
      B
      A
      b +0,05
      +0,02
      s ±0,02 b +0,05
      +0,02
      s ±0,02
      2962.79.
      D220
      Order No Shape b s a e e 1 e 2 d
      Number of
      screw holes
      2962.79.030.040.150 A 30 40 150 20 50 - 14 3
      2962.79.030.040.200 A 30 40 200 20 75 - 14 3
      2962.79.030.040.250 B 30 40 250 20 75 50 14 4
      2962.79.040.040.150 A 40 40 150 20 50 - 14 3
      2962.79.040.040.200 A 40 40 200 20 75 - 14 3
      2962.79.040.040.250 B 40 40 250 20 75 50 14 4
      2962.79.045.050.150 A 45 50 150 25 50 - 18 3
      2962.79.045.050.200 A 45 50 200 25 75 - 18 3
      2962.79.045.050.250 B 45 50 250 25 75 50 18 4
      2962.79.055.050.150 A 55 50 150 25 50 - 18 3
      2962.79.055.050.200 A 55 50 200 25 75 - 18 3
      2962.79.055.050.250 B 55 50 250 25 75 50 18 4
      2962.79.060.050.150 A 60 50 150 25 50 - 18 3
      2962.79.060.050.200 A 60 50 200 25 75 - 18 3
      2962.79.060.050.250 B 60 50 250 25 75 50 18 4
      2962.79.070.050.150 A 70 50 150 25 50 - 18 3
      2962.79.070.050.200 A 70 50 200 25 75 - 18 3
      2962.79.070.050.250 B 70 50 250 25 75 50 18 4
      2962.79. Guide bar with one sliding surfaces, Bronze with solid
      lubricant
      subject to alterations
      Guide bar with three sliding surfaces, Bronze with solid lubricant
      b
      0
      -0,015
      0
      -0,2
      a s
      0
      -0,015
      2962.80.
      Material:
      Bronze with solid lubricant,
      oilless lubricating
      D221
      Order No b s a
      2962.80.025.016.080 25 16 80
      2962.80.025.016.100 25 16 100
      2962.80.025.016.125 25 16 125
      2962.80.040.025.125 40 25 125
      2962.80.040.025.160 40 25 160
      2962.80.040.025.200 40 25 200
      2962.80.063.040.200 63 40 200
      2962.80.063.040.250 63 40 250
      2962.80.063.040.315 63 40 315
      2962.80. Guide bar with three sliding surfaces, Bronze with solid
      lubricant
      subject to alterations
      Guide bracket, Steel with solid lubricant, VDI 3387
      5 x 45°
      t
      c
      d
      1
      10
      15°
      r
      d
      2960.73.
      Material:
      Steel, surface hardened. Sliding
      faces with embedded solid lubri-
      cant.
      Note:
      Screws are not included.
      Fixing:
      Use socket cap screws
      DIN EN ISO 4762.
      45
      32
      5
      M16
      ø17
      1
      e
      1
      e
      f x 45°
      1
      l e
      e
      a
      a
      15°
      r
      15°
      r
      10
      10
      2
      l
      min. support
      2
      l
      min. support
      60
      60
      b f7
      f7
      b
      1
      l
      f x 45°
      2960.73.
      A B
      D222
      Order No Shape b a c l 1 l 2 e e 1 d d 1 f t r
      Number of
      screw holes
      2960.73.063.180.036 A 63 180 36 20 90 50 36 14 20 18 16 16 3
      2960.73.063.200.036 A 63 200 36 20 90 50 36 14 20 18 16 16 3
      2960.73.063.224.036 A 63 224 36 20 90 50 36 14 20 18 16 16 3
      2960.73.071.180.036 A 71 180 36 20 90 50 36 14 20 18 16 16 3
      2960.73.071.200.036 A 71 200 36 20 90 50 36 14 20 18 16 16 3
      2960.73.071.224.036 A 71 224 36 20 90 50 36 14 20 18 16 16 3
      2960.73.090.200.045 A 90 200 45 20 100 50 50 18 26 28 21 25 3
      2960.73.090.224.045 A 90 224 45 20 100 50 50 18 26 28 21 25 3
      2960.73.090.250.045 A 90 250 45 20 100 50 50 18 26 28 21 25 3
      2960.73.112.200.045 A 112 200 45 20 100 50 50 18 26 28 21 25 3
      2960.73.112.224.045 A 112 224 45 20 100 50 50 18 26 28 21 25 3
      2960.73.112.250.045 A 112 250 45 20 100 50 50 18 26 28 21 25 3
      2960.73.140.315.045 B 140 315 45 40 150 80 90 22 33 36 25.5 31.5 4
      2960.73.140.400.045 B 140 400 45 40 150 80 90 22 33 36 25.5 31.5 4
      2960.73.140.400.056 B 140 400 56 40 150 80 90 22 33 36 25.5 31.5 4
      2960.73.190.400.056 B 190 400 56 40 150 80 90 22 33 36 25.5 31.5 4
      2960.73.240.500.056 B 240 500 56 40 250 160 160 26 40 36 30.5 31.5 4
      2960.73.240.630.056 B 240 630 56 40 250 160 160 26 40 36 30.5 31.5 4
      2960.73. Guide bracket, Steel with solid lubricant, VDI 3387
      subject to alterations
      Guide bracket, Bronze with solid lubricant, VDI 3387
      45
      32
      5
      M16
      ø17
      1
      e
      1
      e
      f x 45°
      1
      l e
      e
      a
      a
      15°
      r
      15°
      r
      10
      10
      2
      l
      min. support
      2
      l
      min. support
      60
      60
      b f7
      f7
      b
      1
      l
      f x 45°
      2960.89.
      A B
      5 x 45°
      t
      c
      d
      1
      10
      15°
      r
      d
      2960.89.
      Material:
      Bronze with solid lubricant,
      oilless lubricating
      Note:
      Screws are not included.
      Fixing:
      Use socket cap screws
      DIN EN ISO 4762.
      D223
      Order No Shape b a l 1 l 2 e e 1 d d 1 f c t r
      Number of
      screw holes
      2960.89.063.180 A 63 180 20 90 50 36 14 20 18 36 16 16 3
      2960.89.063.200 A 63 200 20 90 50 36 14 20 18 36 16 16 3
      2960.89.063.224 A 63 224 20 90 50 36 14 20 18 36 16 16 3
      2960.89.071.180 A 71 180 20 90 50 36 14 20 18 36 16 16 3
      2960.89.071.200 A 71 200 20 90 50 36 14 20 18 36 16 16 3
      2960.89.071.224 A 71 224 20 90 50 36 14 20 18 36 16 16 3
      2960.89.090.200 A 90 200 20 100 50 50 18 26 28 45 21 25 3
      2960.89.090.224 A 90 224 20 100 50 50 18 26 28 45 21 25 3
      2960.89.090.250 A 90 250 20 100 50 50 18 26 28 45 21 25 3
      2960.89.112.200 A 112 200 20 100 50 50 18 26 28 45 21 25 3
      2960.89.112.224 A 112 224 20 100 50 50 18 26 28 45 21 25 3
      2960.89.112.250 A 112 250 20 100 50 50 18 26 28 45 21 25 3
      2960.89.140.315 B 140 315 40 150 80 90 22 33 36 45 25.5 31.5 4
      2960.89.190.400 B 190 400 40 150 80 90 22 33 36 56 25.5 31.5 4
      2960.89.240.500 B 240 500 40 250 160 160 26 40 36 56 30.5 31.5 4
      2960.89.240.630 B 240 630 40 250 160 160 26 40 36 56 30.5 31.5 4
      2960.89. Guide bracket, Bronze with solid lubricant, VDI 3387
      subject to alterations
      Slide centre guide, Bronze with solid lubricant
      Material:
      Bronze with solid lubricant,
      oilless lubricating
      Note:
      Screws are not included.
      Fixing:
      Use socket cap screws
      DIN EN ISO 4762 M12.
      25
      25
      A
      B
      50
      25
      13
      50
      25
      1
      l
      l -1,0
      0
      l -1,0
      0
      M8
      6 x 45°
      2 x 45°
      3 x 45°
      6 x 45°
      ø20
      ø14
      s -0,1
      0
      15
      c*
      b -0,02
      0
      1
      b
      2966.72.
      D224
      Order No Shape b l s b 1 l 1 c*
      Number of
      screw holes
      2966.72.030.100.030 A 30 100 30 15 - 18 2
      2966.72.030.150.030 A 30 150 30 15 - 18 2
      2966.72.030.200.030 B 30 200 30 15 100 18 3
      2966.72.030.250.030 B 30 250 30 15 125 18 3
      2966.72.030.300.030 B 30 300 30 15 150 18 3
      2966.72.030.350.030 B 30 350 30 15 175 18 3
      2966.72.040.100.030 A 40 100 30 20 - 18 2
      2966.72.040.150.030 A 40 150 30 20 - 18 2
      2966.72.040.200.030 B 40 200 30 20 100 18 3
      2966.72.040.250.030 B 40 250 30 20 125 18 3
      2966.72.040.300.030 B 40 300 30 20 150 18 3
      2966.72.040.350.030 B 40 350 30 20 175 18 3
      2966.72.040.100.040 A 40 100 40 20 - 20 2
      2966.72.040.150.040 A 40 150 40 20 - 20 2
      2966.72.040.200.040 B 40 200 40 20 100 20 3
      2966.72.040.250.040 B 40 250 40 20 125 20 3
      2966.72.040.300.040 B 40 300 40 20 150 20 3
      2966.72.040.350.040 B 40 350 40 20 175 20 3
      *Solid lubricant area
      2966.72. Slide centre guide, Bronze with solid lubricant
      subject to alterations
      Overrun Cam, Steel hardened, VDI 3357
      plug gauge
      h6
      ø16
      w
      radiused
      R25
      R3
      s ±0,01
      15
      20 e
      b
      a
      90
      45 20
      ø20
      ø13,5
      3x45°
      l
      t
      2960.90.
      Material:
      Steel, through-hardened
      Note:
      Screws are not included.
      Fixing:
      Use socket cap screws
      DIN EN ISO 4762 M12.
      2960.90.
      2960.91.
      Mounting example
      D225
      Order No b a s e t w l
      2960.90.100.170.045 100 170 45 60 30 20 143.37
      2960.90.125.170.045 125 170 45 85 30 20 143.37
      2960.90.150.170.045 150 170 45 110 30 20 143.37
      2960.90.200.170.045 200 170 45 160 30 20 143.37
      2960.90.100.150.045 100 150 45 60 30 30 127.86
      2960.90.100.170.060 100 170 60 60 45 30 127.86
      2960.90.125.150.045 125 150 45 85 30 30 127.86
      2960.90.125.170.060 125 170 60 85 45 30 127.86
      2960.90.150.150.045 150 150 45 110 30 30 127.86
      2960.90.150.170.060 150 170 60 110 45 30 127.86
      2960.90.200.150.045 200 150 45 160 30 30 127.86
      2960.90.200.170.060 200 170 60 160 45 30 127.86
      2960.90. Overrun Cam, Steel hardened, VDI 3357
      subject to alterations
      Overrun Cam, Steel hardened and gas nitrided, VDI 3357
      Material:
      Steel, through-hardened and gas
      nitrided
      Note:
      Screws are not included.
      Fixing:
      Use socket cap screws
      DIN EN ISO 4762 M12.
      2960.90.
      2960.91.
      plug gauge
      h6
      ø16
      w
      radiused
      R25
      R3
      s ±0,01
      15
      20 e
      b
      a
      90
      45 20
      ø20
      ø13,5
      3x45°
      l
      t
      2960.91.
      Mounting example
      D226
      Order No b a s e t w l
      2960.91.100.170.045 100 170 45 60 30 20 143.37
      2960.91.125.170.045 125 170 45 85 30 20 143.37
      2960.91.150.170.045 150 170 45 110 30 20 143.37
      2960.91.200.170.045 200 170 45 160 30 20 143.37
      2960.91.100.150.045 100 150 45 60 30 30 127.86
      2960.91.100.170.060 100 170 60 60 45 30 127.86
      2960.91.125.150.045 125 150 45 85 30 30 127.86
      2960.91.125.170.060 125 170 60 85 45 30 127.86
      2960.91.150.150.045 150 150 45 110 30 30 127.86
      2960.91.150.170.060 150 170 60 110 45 30 127.86
      2960.91.200.150.045 200 150 45 160 30 30 127.86
      2960.91.200.170.060 200 170 60 160 45 30 127.86
      2960.91. Overrun Cam, Steel hardened and gas nitrided, VDI 3357
      subject to alterations
      Overrun Cam, Bronze with solid lubricant, VDI 3357
      plug gauge
      h6
      ø16
      w
      radiused
      R25
      R3
      s ±0,01
      15
      20 e
      b
      a
      90
      45 20
      ø20
      ø13,5
      3x45°
      l
      t
      2960.92.
      Material:
      Bronze with solid lubricant,
      oilless lubricating
      Note:
      Screws are not included.
      Fixing:
      Use socket cap screws
      DIN EN ISO 4762 M12.
      2960.92.
      2960.90.
      Mounting example
      D227
      Order No b a s e t w l
      2960.92.100.170.045 100 170 45 60 30 20 143.37
      2960.92.125.170.045 125 170 45 85 30 20 143.37
      2960.92.150.170.045 150 170 45 110 30 20 143.37
      2960.92.200.170.045 200 170 45 160 30 20 143.37
      2960.92.100.150.045 100 150 45 60 30 30 127.86
      2960.92.100.170.060 100 170 60 60 45 30 127.86
      2960.92.125.150.045 125 150 45 85 30 30 127.86
      2960.92.125.170.060 125 170 60 85 45 30 127.86
      2960.92.150.150.045 150 150 45 110 30 30 127.86
      2960.92.150.170.060 150 170 60 110 45 30 127.86
      2960.92.200.150.045 200 150 45 160 30 30 127.86
      2960.92.200.170.060 200 170 60 160 45 30 127.86
      2960.92. Overrun Cam, Bronze with solid lubricant, VDI 3357
      subject to alterations
      Angled guide gib, Bronze with solid lubricant
      Material:
      Bronze with solid lubricant, oilless lubricating
      Note:
      Screws are not included.
      Fixing:
      Use socket cap screws DIN EN ISO 4762.
      e
      t
      d
      20
      l
      4
      e
      2
      e
      3
      e
      1
      e
      R2
      1
      a
      1
      d
      3
      a
      ±0,1
      4
      a
      +0,1
      +0,05
      2
      a
      2962.70.
      D228
      Order No a 1 a 2 l a 3 a 4 e e 1 e 2 e 3 e 4 d d 1 t
      Number of
      screw holes
      2962.70.026.100 26 20 100 8 10 9 60 - - - 15 9 9.6 2
      2962.70.026.150 26 20 150 8 10 9 55 55 - - 15 9 9.6 3
      2962.70.026.200 26 20 200 8 10 9 55 50 55 - 15 9 9.6 4
      2962.70.032.100 32 30 100 10 15 11 60 - - - - 11 - 2
      2962.70.032.150 32 30 150 10 15 11 55 55 - - - 11 - 3
      2962.70.032.200 32 30 200 10 15 11 55 50 55 - - 11 - 4
      2962.70.032.250 32 30 250 10 15 11 70 70 70 - - 11 - 4
      2962.70.050.200 50 45 200 22 25 14 55 50 55 - 18 11 25 4
      2962.70.050.250 50 45 250 22 25 14 70 70 70 - 18 11 25 4
      2962.70.050.300 50 45 300 22 25 14 65 65 65 65 18 11 25 5
      2962.70.050.350 50 45 350 22 25 14 80 75 75 80 18 11 25 5
      2962.70. Angled guide gib, Bronze with solid lubricant
      subject to alterations
      Angled guide gib, Bronze with solid lubricant, CNOMO
      40
      40
      b
      28
      a
      d
      c
      R3,5
      ø18
      ø11
      16 ± 0,1
      13
      R2
      R1
      20 ±0,01
      2962.70.45.
      Material:
      Bronze with solid lubricant, oilless lubricating
      Note:
      Screws are not included.
      Fixing:
      Use socket cap screws DIN EN ISO 4762 M10.
      D229
      Order No a b c d
      Number of
      screw holes
      2962.70.45.040.160 160 15 145 - 2
      2962.70.45.040.250 250 15 145 225 3
      2962.70.45. Angled guide gib, Bronze with solid lubricant, CNOMO
      subject to alterations
      Angled guide gib, Bronze with solid lubricant
      Material:
      Bronze with solid lubricant, oilless lubricating
      b l
      h
      r
      1
      1
      b
      ±0,1
      1
      h
      +0,05
      +0,1
      2962.71.
      D230
      Order No b h b 1 h 1 l l l
      305 605 1005
      2962.71.020.012.0305 20 12 5 6 ●
      2962.71.025.015.0305 25 15 7 8 ●
      2962.71.030.020.0305 30 20 9 12 ●
      2962.71.032.030.0605 32 30 10 15 ● ●
      2962.71.035.035.0605 35 35 12 24 ● ●
      2962.71.050.045.0605 50 45 22 25 ● ●
      2962.71.050.050.0605 50 50 16 34 ● ●
      2962.71. Angled guide gib, Bronze with solid lubricant
      subject to alterations
      Angled guide gib, Bronze with solid lubricant
      b l
      h
      1
      b
      +0,5
      1
      h
      +0,05
      +0,1
      2962.72.
      Material:
      Bronze with solid lubricant, oilless lubricating
      D231
      Order No b h b 1 h 1 l l l
      205 320 605
      2962.72.015.012.0205 15 12 5 5 ●
      2962.72.020.017.0205 20 17 5 7 ● ●
      2962.72.020.022.0205 20 22 5 7 ● ●
      2962.72.028.027.0205 28 27 8 10 ● ● ●
      2962.72.028.036.0205 28 36 8 10 ● ● ●
      2962.72.028.046.0205 28 46 8 10 ● ● ●
      2962.72.040.066.0205 40 66 12 22 ● ● ●
      2962.72.040.086.0205 40 86 12 26 ● ● ●
      2962.72. Angled guide gib, Bronze with solid lubricant
      subject to alterations
      Angled guide gib, Bronze with solid lubricant
      Provide
      shoulders
      to support
      angle guide
      for high
      transverse
      forces
      Aligne
      this side
      only
      Flat guide bar
      Slide
      Mounting example
      Material:
      Bronze with solid lubricant, oilless lubricating
      Note:
      Screws are not included.
      Fixing:
      Use socket cap screws DIN EN ISO 4762.
      2962.73.
      d
      l
      R1
      Through-
      holes
      for screws
      Aligning surface
      e
      g
      f
      c
      b
      1
      h
      1
      b
      3
      b
      2
      b
      3
      h
      2
      h
      D232
      Order No b 1 h 1 l b 2 b 3 h 2 h 3 b c e f g d
      Number of
      screw holes
      2962.73.025.125 25 15.5 125 18 9 8.5 6 27.5 - - - 97.5 9 2
      2962.73.025.160 25 15.5 160 18 9 8.5 6 27.5 - - - 132.5 9 2
      2962.73.032.125 32 30.5 125 22 11 15.5 9 27.5 - - - 97.5 11 2
      2962.73.032.160 32 30.5 160 22 11 15.5 9 27.5 - - - 132.5 11 2
      2962.73.032.200 32 30.5 200 22 11 15.5 9 27.5 - - - 172.5 11 2
      2962.73.045.100 45 50.5 100 30 15 34.5 18 27.5 - - - 72.5 13.5 2
      2962.73.045.160 45 50.5 160 30 15 34.5 18 27.5 - - - 132.5 13.5 2
      2962.73.055.100 55 55.5 100 37 20 39.5 23 27.5 - - - 72.5 13.5 2
      2962.73.055.160 55 55.5 160 37 20 39.5 23 27.5 - - - 132.5 13.5 2
      2962.73.070.160 70 75.5 160 50 30 55.5 35 35 - - - 125 17.5 2
      2962.73.070.200 70 75.5 200 50 30 55.5 35 35 - - - 165 17.5 2
      2962.73.070.250 70 75.5 250 50 30 55.5 35 35 - 125 - 215 17.5 3
      2962.73.070.400 70 75.5 400 50 30 55.5 35 35 125 200 275 365 17.5 5
      2962.73.085.160 85 90.5 160 63 38 65.5 45 42.5 - - - 117.5 22 2
      2962.73.085.200 85 90.5 200 63 38 65.5 45 42.5 - - - 157.5 22 2
      2962.73.085.250 85 90.5 250 63 38 65.5 45 42.5 - 125 - 207.5 22 3
      2962.73.085.400 85 90.5 400 63 38 65.5 45 42.5 125 200 275 357.5 22 5
      2962.73. Angled guide gib, Bronze with solid lubricant
      subject to alterations
      Angled guide gib, Bronze with solid lubricant
      h
      -0,1
      R0,4
      b 1 +0,02
      h -0,015
      b
      h 2
      -0,015 1
      l
      0
      -0,2
      2962.81.
      Material:
      Bronze with solid lubricant, oilless lubricating
      D233
      Order No h b l h 1 h 2 b 1
      2962.81.016.115.040 16 11.5 40 12 4 6
      2962.81.016.115.050 16 11.5 50 12 4 6
      2962.81.016.115.063 16 11.5 63 12 4 6
      2962.81.016.115.080 16 11.5 80 12 4 6
      2962.81.016.155.050 16 15.5 50 11 5 8
      2962.81.016.155.063 16 15.5 63 11 5 8
      2962.81.016.155.080 16 15.5 80 11 5 8
      2962.81.016.155.100 16 15.5 100 11 5 8
      2962.81.020.195.063 20 19.5 63 15 5 8
      2962.81.020.195.080 20 19.5 80 15 5 8
      2962.81.020.195.100 20 19.5 100 15 5 8
      2962.81.020.195.125 20 19.5 125 15 5 8
      2962.81.020.245.080 20 24.5 80 15 5 8
      2962.81.020.245.100 20 24.5 100 15 5 8
      2962.81.020.245.125 20 24.5 125 15 5 8
      2962.81.020.245.160 20 24.5 160 15 5 8
      2962.81.025.315.100 25 31.5 100 19 6 10
      2962.81.025.315.125 25 31.5 125 19 6 10
      2962.81.025.315.160 25 31.5 160 19 6 10
      2962.81.025.315.200 25 31.5 200 19 6 10
      2962.81.025.395.125 25 39.5 125 19 6 10
      2962.81.025.395.160 25 39.5 160 19 6 10
      2962.81.025.395.200 25 39.5 200 19 6 10
      2962.81.025.395.250 25 39.5 250 19 6 10
      2962.81.032.495.160 32 49.5 160 24 8 12
      2962.81.032.495.200 32 49.5 200 24 8 12
      2962.81.032.495.250 32 49.5 250 24 8 12
      2962.81.032.495.315 32 49.5 315 24 8 12
      2962.81. Angled guide gib, Bronze with solid lubricant
      subject to alterations
      Angled guide gib, Bronze with solid lubricant
      Provide
      shoulders
      to support
      angle guide
      for high
      transverse
      forces
      Aligne
      this side
      only
      Flat guide bar
      Slide
      Mounting example
      Material:
      Bronze with solid lubricant, oilless lubricating
      Note:
      Screws and pins are not included.
      Fixing:
      Use socket cap screws DIN EN ISO 4762 and dowel pins DIN 7979.
      d
      h
      g
      f
      e
      b
      c
      a
      l
      Through-
      holes
      for screws
      t
      R2
      1
      a
      2
      d
      d
      4
      a
      5
      a
      2
      a
      1
      e
      1
      d
      H7
      3
      a
      2962.82.
      D234
      Order No a 1 a 2 l a 3 a 4 a 5 a b c e e 1 f g h d d 1 d 2 t
      Number of
      screw holes
      2962.82.055.100 55 55 100 37 39 23 10 27.5 - - 20 - 72.5 90 13.5 10 11 30 2
      2962.82.055.160 55 55 160 37 39 23 10 27.5 - - 20 - 132.5 150 13.5 10 11 30 2
      2962.82.070.160 70 75 160 50 55 35 12.5 35 - - 30 - 125 147.5 17.5 12 13 30 2
      2962.82.070.200 70 75 200 50 55 35 12.5 35 - - 30 - 165 187.5 17.5 12 13 30 2
      2962.82.070.250 70 75 250 50 55 35 12.5 35 - 125 30 - 215 237.5 17.5 12 13 30 3
      2962.82.070.400 70 75 400 50 55 35 12.5 35 125 200 30 275 365 387.5 17.5 12 13 30 5
      2962.82.085.160 85 90 160 63 65 45 15 42.5 - - 38 - 117.5 145 22 16 17 30 2
      2962.82.085.200 85 90 200 63 65 45 15 42.5 - - 38 - 157.5 185 22 16 17 30 2
      2962.82.085.250 85 90 250 63 65 45 15 42.5 - 125 38 - 207.5 235 22 16 17 30 3
      2962.82.085.400 85 90 400 63 65 45 15 42.5 125 200 38 275 357.5 385 22 16 17 30 5
      2962.82. Angled guide gib, Bronze with solid lubricant
      subject to alterations
      Angled guide gib, Bronze with solid lubricant
      +0,7
      d
      d
      H7
      F7
      d
      l 2 ±0,1
      l 3 ±0,01
      l 1 -0,2
      1
      l 4
      3
      h
      2
      t
      3
      t
      h 2
      t 1 ±0,1
      2
      3
      g6
      b
      d
      +1
      3
      R Z 6,3
      R Z 6,3
      B
      A
      l 4
      2962.83.
      Material:
      Bronze with solid lubricant, oilless lubricating
      Note:
      Screws and pins are not included.
      Fixing:
      Use socket cap screws DIN EN ISO 4762 and
      dowel pins DIN 7979.
      D235
      Order No Shape b h 1 * h 2 l 1 h 3 t 1 l 2 l 3 l 4 d 1 d 2 d 3 t 2 t 3
      Number of
      screw holes
      2962.83.016.012.050 A 16 12 11 50 4 5 34 14 9.5 10 5.5 5 5.7 - 2
      2962.83.016.012.071 A 16 12 11 71 4 5 55 35 9.5 10 5.5 5 5.7 - 2
      2962.83.016.012.090 B 16 12 11 90 4 5 74 54 9.5 10 5.5 5 5.7 - 3
      2962.83.020.020.080 A 20 20 19 80 5 5 64 40 12 11 6.6 6 6.8 9.5 2
      2962.83.020.020.100 A 20 20 19 100 5 5 84 60 12 11 6.6 6 6.8 9.5 2
      2962.83.020.020.125 B 20 20 19 125 5 5 109 85 12 11 6.6 6 6.8 9.5 3
      2962.83.025.032.100 A 25 32 31 100 6 6 80 50 15.5 15 9 8 9 19 2
      2962.83.025.032.125 A 25 32 31 125 6 6 105 75 15.5 15 9 8 9 19 2
      2962.83.025.032.160 B 25 32 31 160 6 6 140 110 15.5 15 9 8 9 19 3
      2962.83.030.050.125 A 30 50 49 125 8 7 95 55 18 18 11 10 11 34 2
      2962.83.030.050.160 A 30 50 49 160 8 7 130 90 18 18 11 10 11 34 2
      2962.83.030.050.200 B 30 50 49 200 8 7 170 130 18 18 11 10 11 34 3
      *h 1 = Nominal ordering height
      2962.83. Angled guide gib, Bronze with solid lubricant
      subject to alterations
      T-Guide bar, Bronze with solid lubricant
      Material:
      Bronze with solid lubricant,
      oilless lubricating
      Material:
      Bronze with solid lubricant,
      oilless lubricating
      + 0,05
      + 0,05
      c
      + 0,1
      l
      a -0,2
      + 0,1
      h
      - 0,2
      b
      0,02/300
      2964.77.
      -0,2
      + 0,05
      c
      + 0,2
      + 0,1
      + 0,05
      l
      a
      + 0,1
      + 0,05 h
      b
      0,02/300
      2964.78.
      D236
      Order No a b c h l
      2964.77.012.018.0350 12 18 8 5 350
      2964.77.025.022.0350 25 22 12 15 350
      2964.77.035.028.0350 35 28 18 20 350
      Order No a b c h l
      2964.78.012.018.0350 12 18 8 5 350
      2964.78.025.022.0350 25 22 12 15 350
      2964.78.035.028.0350 35 28 18 20 350
      2964.77.
      2964.78.
      T-Guide bar, Bronze with solid lubricant
      T-Guide bar, Bronze with solid lubricant
      subject to alterations
      Sliding block, Bronze with solid lubricant, NAAMS
      Prismatic guide, Steel, NAAMS
      d 1
      t
      h
      3x45°
      25
      120°
      l
      50
      e 1 e 1
      5x45°
      (h 1 )
      d
      Screws M12
      *Screws M16
      DIN EN ISO 4762
      G6
      ø12
      Holes for pins
      G6
      *16 / Reference face
      h 3
      e ±0,01
      b ±0,026
      2963.82.
      (h 1 )
      t
      h
      h 2
      120°
      10
      l
      50
      25 e 1 e 1
      5x45°
      3x45°
      d 1
      d
      G6
      ø12
      Holes for pins pre-drilled to
      G6
      *16 /
      Screws M12
      *Screws M16
      DIN EN ISO 4762
      Reference face
      h 3
      e ±0,01
      b ±0,026
      2963.83.
      Material:
      Bronze with solid lubricant,
      oilless lubricating
      Note:
      Screws and pins are not included.
      * at 2963.82.125.
      Material:
      Steel, sliding faces surface
      hardened
      Note:
      Screws and pins are not included.
      * at 2963.83.125.
      D237
      Order No b h (h 1 ) h 3 l e 1 e d d 1 t
      Number of
      screw holes
      2963.82.065.039.0150 65 39 (42) 65 150 100 50 20 13.5 13 2
      2963.82.065.039.0200 65 39 (42) 65 200 150 100 20 13.5 13 2
      2963.82.065.039.0250 65 39 (42) 65 250 100 150 20 13.5 13 3
      2963.82.065.039.0300 65 39 (42) 65 300 125 200 20 13.5 13 3
      2963.82.075.039.0150 75 39 (42) 65 150 100 50 20 13.5 13 2
      2963.82.075.039.0200 75 39 (42) 65 200 150 100 20 13.5 13 2
      2963.82.075.039.0250 75 39 (42) 65 250 100 150 20 13.5 13 3
      2963.82.075.039.0300 75 39 (42) 65 300 125 200 20 13.5 13 3
      2963.82.125.052.0150 125 52 (57) 85 150 100 50 26 17.5 15 2
      2963.82.125.052.0200 125 52 (57) 85 200 150 100 26 17.5 15 2
      2963.82.125.052.0250 125 52 (57) 85 250 100 150 26 17.5 15 3
      2963.82.125.052.0300 125 52 (57) 85 300 125 200 26 17.5 15 3
      Order No b h (h 1 ) h 2 h 3 l e e 1 d d 1 t
      Number of
      screw holes
      2963.83.065.040.0150 65 40 (23) 21 65 150 50 100 20 13.5 10 2
      2963.83.065.040.0200 65 40 (23) 21 65 200 100 150 20 13.5 10 2
      2963.83.065.040.0250 65 40 (23) 21 65 250 150 100 20 13.5 10 3
      2963.83.065.040.0300 65 40 (23) 21 65 300 200 125 20 13.5 10 3
      2963.83.075.040.0150 75 40 (23) 21 65 150 50 100 20 13.5 10 2
      2963.83.075.040.0200 75 40 (23) 21 65 200 100 150 20 13.5 10 2
      2963.83.075.040.0250 75 40 (23) 21 65 250 150 100 20 13.5 10 3
      2963.83.075.040.0300 75 40 (23) 21 65 300 200 125 20 13.5 10 3
      2963.83.125.060.0150 125 60 (28) 27 85 150 50 100 26 17.5 15 2
      2963.83.125.060.0200 125 60 (28) 27 85 200 100 150 26 17.5 15 2
      2963.83.125.060.0250 125 60 (28) 27 85 250 150 100 26 17.5 15 3
      2963.83.125.060.0300 125 60 (28) 27 85 300 200 125 26 17.5 15 3
      2963.82.
      2963.83. Prismatic guide, Steel, NAAMS
      Sliding block, Bronze with solid lubricant, NAAMS
      subject to alterations
      Sliding block, Bronze with solid lubricant, VDI 3357
      Prismatic guide, Steel, VDI 3357
      Material:
      Bronze with solid lubricant,
      oilless lubricating
      Note:
      Screws and pins are not included.
      * at 2963.84.125.
      Material:
      Steel, sliding faces surface
      hardened
      Note:
      Screws and pins are not included.
      * at 2963.85.125.
      h
      t
      d 1
      d
      H7
      ø12
      Holes for pins
      25
      l
      55
      5x45°
      e 1 e 1
      3x45°
      120°
      Screws M12
      *Screws M16
      DIN EN ISO 4762
      H7
      *16 /
      (h 1 ) e ±0,01
      b h6
      h 3
      rotating
      2963.84.
      d 1
      Screws M12
      *Screws M16
      DIN EN ISO 4762
      h
      d
      t
      10
      e 1 25 e 1
      l
      55
      5x45°
      3x45°
      (h 1 )
      h 2
      H7
      ø12
      Holes for pins
      H7
      *16 /
      e ±0,01
      b h6
      120°
      h 3
      rotating
      2963.85.
      D238
      Order No b h (h 1 ) h 3 l e e 1 d d 1 t
      Number of
      screw holes
      2963.84.065.044.0150 65 44 (47) 65 150 45 100 20 13.5 20 2
      2963.84.065.044.0200 65 44 (47) 65 200 95 150 20 13.5 20 2
      2963.84.065.044.0250 65 44 (47) 65 250 145 100 20 13.5 20 3
      2963.84.065.044.0300 65 44 (47) 65 300 195 125 20 13.5 20 3
      2963.84.125.047.0150 125 47 (52) 85 150 45 100 26 17.5 15 2
      2963.84.125.047.0200 125 47 (52) 85 200 95 150 26 17.5 15 2
      2963.84.125.047.0250 125 47 (52) 85 250 145 100 26 17.5 15 3
      2963.84.125.047.0300 125 47 (52) 85 300 195 125 26 17.5 15 3
      2963.84.125.052.0150 125 52 (57) 85 150 45 100 26 17.5 15 2
      2963.84.125.052.0200 125 52 (57) 85 200 95 150 26 17.5 15 2
      2963.84.125.052.0250 125 52 (57) 85 250 145 100 26 17.5 15 3
      2963.84.125.052.0300 125 52 (57) 85 300 195 125 26 17.5 15 3
      Order No b h (h 1 ) h 2 h 3 l e e 1 d d 1 t
      Number of
      screw holes
      2963.85.065.035.0150 65 35 (18) 17 65 150 45 100 20 13.5 8 2
      2963.85.065.035.0200 65 35 (18) 17 65 200 95 150 20 13.5 8 2
      2963.85.065.035.0250 65 35 (18) 17 65 250 145 100 20 13.5 8 3
      2963.85.065.035.0300 65 35 (18) 17 65 300 195 125 20 13.5 8 3
      2963.85.125.060.0150 125 60 (33) 32 85 150 45 100 26 17.5 15 2
      2963.85.125.060.0200 125 60 (33) 32 85 200 95 150 26 17.5 15 2
      2963.85.125.060.0250 125 60 (33) 32 85 250 145 100 26 17.5 15 3
      2963.85.125.060.0300 125 60 (33) 32 85 300 195 125 26 17.5 15 3
      2963.85.125.060.0150.1 125 60 (28) 27 85 150 45 100 26 17.5 15 2
      2963.85.125.060.0200.1 125 60 (28) 27 85 200 95 150 26 17.5 15 2
      2963.85.125.060.0250.1 125 60 (28) 27 85 250 145 100 26 17.5 15 3
      2963.85.125.060.0300.1 125 60 (28) 27 85 300 195 125 26 17.5 15 3
      2963.84.
      2963.85. Prismatic guide, Steel, VDI 3357
      Sliding block, Bronze with solid lubricant, VDI 3357
      subject to alterations
      Prismatic guide, Bronze with solid lubricant
      Sliding block, Steel
      H7
      2 x ø10
      65
      l
      e 1 e
      35
      (18)
      7
      15
      120°
      ø17,5
      ø11
      e e 1
      11
      e ±0,01
      2
      h 3
      2963.70.
      ø14
      15
      65
      l
      e e 1
      (47)
      44
      ø17,5
      ø11
      20
      120°
      e 1 e
      10
      H7
      2 x ø10
      e ±0,01
      2
      h 3
      2963.71.
      Material:
      Bronze with solid lubricant,
      oilless lubricating
      Note:
      Screws and pins are not included.
      Fixing:
      Use socket cap screws
      DIN EN ISO 4762 M10.
      Material:
      Steel, sliding faces surface
      hardened
      Note:
      Screws and pins are not included.
      Fixing:
      Use socket cap screws
      DIN EN ISO 4762 M10.
      D239
      Order No e e 1 e 2 h 3 l
      Number of
      screw holes
      2963.70.065.035.0100 20 60 20 65 100 2
      2963.70.065.035.0150 25 50 50 65 150 3
      2963.70.065.035.0200 25 50 100 65 200 4
      2963.70.065.035.0250 25 50 150 65 250 5
      2963.70.065.035.0300 25 50 200 65 300 6
      Order No e e 1 e 2 h 3 l
      Number of
      screw holes
      2963.71.065.044.0100 20 60 20 65 100 2
      2963.71.065.044.0150 25 50 50 65 150 3
      2963.71.065.044.0200 25 50 100 65 200 4
      2963.71.065.044.0250 25 50 150 65 250 5
      2963.71.065.044.0300 25 50 200 65 300 6
      2963.70.
      2963.71. Sliding block, Steel
      Prismatic guide, Bronze with solid lubricant
      subject to alterations
      Prismatic guide, Bronze with solid lubricant
      Sliding block, Steel
      Material:
      Bronze with solid lubricant,
      oilless lubricating
      Note:
      Screws and pins are not included.
      Fixing:
      Use socket cap screws
      DIN EN ISO 4762 M12.
      Material:
      Steel, sliding faces surface
      hardened
      Note:
      Screws and pins are not included.
      Fixing:
      Use socket cap screws
      DIN EN ISO 4762 M12.
      (18)
      13
      ø10 (2x)
      ø20 (6x)
      ø13 (6x)
      120
      90
      e 1 50
      25
      e e
      l
      15
      120°
      10
      35
      H7
      2963.72.
      13
      ø20 (6x)
      ø13 (6x)
      (47)
      3x45°
      44
      25
      120°
      55
      120
      90
      e 1 50
      25 e e
      l
      ø10 (2x)
      H7
      2963.73.
      D240
      Order No l e e 1
      Number of
      screw holes
      2963.72.120.035.0150 150 50 50 6
      2963.72.120.035.0200 200 75 100 6
      2963.72.120.035.0250 250 100 150 6
      2963.72.120.035.0300 300 125 200 6
      Order No l e e 1
      Number of
      screw holes
      2963.73.120.044.0150 150 50 50 6
      2963.73.120.044.0200 200 75 100 6
      2963.73.120.044.0250 250 100 150 6
      2963.73.120.044.0300 300 125 200 6
      2963.72.
      2963.73. Sliding block, Steel
      Prismatic guide, Bronze with solid lubricant
      subject to alterations D241
      subject to alterations
      Prismatic guide, Steel
      Material:
      Steel, sliding faces surface hardened
      Note:
      Screws and pins are not included.
      Fixing:
      Use socket cap screws DIN EN ISO 4762 M12.
      (16)
      Socket cap screws
      Holes for pins pre-drilled
      to ø11,8
      Holes for pins pre-drilled
      to ø11,8
      150
      82
      82
      13
      14
      57
      ø14
      ø22
      25
      90°
      95
      60 30 30 15
      l
      20
      e e 1 e 1 e
      Holes for pins pre-drilled
      to ø11,8
      200
      82
      20 25 110 25
      Socket cap screws
      Socket cap screws
      2963.81.
      A
      B C
      D242
      Order No Shape l e e 1
      Number of
      screw holes
      2963.81.095.057.0150 B 150 30 - 2
      2963.81.095.057.0200 C 200 25 - 2
      2963.81.095.057.0250 A 250 25 80 3
      2963.81.095.057.0300 A 300 30 100 3
      2963.81. Prismatic guide, Steel
      subject to alterations
      Sliding block, Bronze with solid lubricant
      (58)
      ø14
      ø11,8
      13
      ø22
      ø14
      150
      Holes for pins pre-drilled
      80
      90°
      18
      60 30 30 15
      l
      20
      e e 1 e 1
      25
      47
      e
      80
      Holes for pins pre-drilled
      200
      Holes for pins pre-drilled
      80
      20 25 110 25
      Socket cap screws Socket cap screws
      Socket cap screws
      2963.80.
      A
      B C
      Material:
      Bronze with solid lubricant, oilless lubricating
      Note:
      Screws and pins are not included.
      Fixing:
      Use socket cap screws DIN EN ISO 4762 M12.
      D243
      Order No Shape l e e 1
      Number of
      screw holes
      2963.80.080.047.0150 B 150 30 - 2
      2963.80.080.047.0200 C 200 25 - 2
      2963.80.080.047.0250 A 250 25 80 3
      2963.80.080.047.0300 A 300 30 100 3
      2963.80. Sliding block, Bronze with solid lubricant
      subject to alterations
      Single-sided prismatic guide, Bronze with solid lubricant
      Material:
      Bronze with solid lubricant, oilless lubricating
      Note:
      Matching single-sided prismatic sliding blocks
      2965.83.
      Screws and pins are not included.
      Fixing:
      Use socket cap screws DIN EN ISO 4762 M12.
      15
      45°
      ø14
      Holes for pins pre-drilled
      ø11,8
      15
      60
      20
      e e 1 e 1 25
      15
      47
      e
      60
      Holes ø14
      Holes ø14
      Holes for pins pre-drilled
      Holes for pins pre-drilled
      60
      Holes ø14
      20
      2965.81.
      A
      B C
      l
      e e e
      l
      1 1
      l
      e e e
      D244
      Order No Shape l e e 1
      Number of
      screw holes
      2965.81.060.047.0150 B 150 30 60 2
      2965.81.060.047.0200 C 200 25 110 3
      2965.81.060.047.0250 A 250 25 80 3
      2965.81.060.047.0300 A 300 30 100 3
      2965.81. Single-sided prismatic guide, Bronze with solid lubricant
      subject to alterations
      Single-sided prismatic sliding block, Steel
      Holes for pins pre-drilled
      15
      60
      20
      e e 1 e 1 e
      60
      Holes ø14
      Holes ø14
      Holes for pins pre-drilled
      15
      45°
      ø14
      ø11,8
      25
      15
      47
      Holes for pins pre-drilled
      60
      Holes ø14
      20
      2965.83.
      A
      B C
      l
      e e e
      l
      1
      e 1
      l
      e e
      Material:
      Steel, sliding faces surface hardened
      Note:
      Matching single-sided prismatic guides
      2965.81.
      Screws and pins are not included.
      Fixing:
      Use socket cap screws DIN EN ISO 4762 M12.
      D245
      Order No Shape l e e 1
      Number of
      screw holes
      2965.83.060.047.0150 B 150 30 60 2
      2965.83.060.047.0200 C 200 25 110 3
      2965.83.060.047.0250 A 250 25 80 3
      2965.83.060.047.0300 A 300 30 100 3
      2965.83. Single-sided prismatic sliding block, Steel
      subject to alterations
      Single-sided prismatic guide, Bronze with solid lubricant, CNOMO
      Material:
      Bronze with solid lubricant, oilless lubricating
      Note:
      Matching single-sided prismatic sliding blocks
      2965.82.45.
      Screws and pins are not included.
      Fixing:
      Use socket cap screws DIN EN ISO 4762 M10.
      12
      3x45°
      A
      45°
      135
      25
      25
      225
      125
      l
      l
      g
      l
      h
      p
      13
      25
      ø18
      ø11
      B
      2965.80.45.
      D246
      Order No Shape l g h l p
      Number of
      screw holes
      2965.80.45.060.045.160 A 60 45 160 50 2
      2965.80.45.060.045.250 B 60 45 250 50 3
      2965.80.45.080.060.160 A 80 60 160 80 2
      2965.80.45.080.060.250 B 80 60 250 80 3
      2965.80.45. Single-sided prismatic guide, Bronze with solid lubricant, CNOMO
      subject to alterations
      Single-sided prismatic sliding block, Steel, CNOMO
      12
      3x45°
      A
      45°
      135
      25
      25
      225
      125
      l
      l
      g
      l
      h
      p
      13
      25
      ø18
      ø11
      B
      2965.82.45.
      Material:
      Steel, sliding faces surface hardened
      Note:
      Matching single-sided prismatic guides
      2965.80.45.
      Screws and pins are not included.
      Fixing:
      Use socket cap screws DIN EN ISO 4762 M10.
      D247
      Order No Shape l g h l p
      Number of
      screw holes
      2965.82.45.060.045.160 A 60 45 160 50 2
      2965.82.45.060.045.250 B 60 45 250 50 3
      2965.82.45.080.060.160 A 80 60 160 80 2
      2965.82.45.080.060.250 B 80 60 250 80 3
      2965.82.45. Single-sided prismatic sliding block, Steel, CNOMO
      subject to alterations
      Single-sided prismatic guide, Bronze with solid lubricant
      Material:
      Bronze with solid lubricant, oilless lubricating
      Note:
      Matching single-sided prismatic sliding blocks
      2965.82.
      Screws and pins are not included.
      Fixing:
      Use socket cap screws DIN EN ISO 4762 M12.
      20
      13
      Holes for pins pre-drilled
      45°
      57
      9
      88
      20
      e
      1
      e e 25
      ø14
      ø11,8
      ø22
      ø14
      20
      Socket cap screws
      15
      88
      Holes for pins pre-drilled
      88
      Holes for pins pre-drilled
      Socket cap screws
      Socket cap screws
      l
      1 1
      e
      2965.80.
      A
      B C
      e e e
      l
      e e e
      l
      1 1
      D248
      Order No Shape l e e 1
      Number of
      screw holes
      2965.80.088.057.0150 B 150 30 60 2
      2965.80.088.057.0200 C 200 25 110 3
      2965.80.088.057.0250 A 250 25 80 3
      2965.80.088.057.0300 A 300 30 100 3
      2965.80. Single-sided prismatic guide, Bronze with solid lubricant
      subject to alterations
      Single-sided prismatic sliding block, Steel
      20
      Holes for pins pre-drilled
      88
      15
      20
      e
      1 1
      e
      88
      Holes for pins pre-drilled
      20
      13
      45°
      57
      9
      25
      ø14
      ø11,8
      ø22
      ø14
      88
      Holes for pins pre-drilled
      Socket cap screws Socket cap screws
      Socket cap screws
      e e
      l
      2965.82.
      A
      B C
      e e
      l
      e e e
      1
      e 1
      l
      Material:
      Steel, sliding faces surface hardened
      Note:
      Matching single-sided prismatic guides
      2965.80.
      Screws and pins are not included.
      Fixing:
      Use socket cap screws DIN EN ISO 4762 M12.
      D249
      Order No Shape l e e 1
      Number of
      screw holes
      2965.82.088.057.0150 B 150 30 60 2
      2965.82.088.057.0200 C 200 25 110 3
      2965.82.088.057.0250 A 250 25 80 3
      2965.82.088.057.0300 A 300 30 100 3
      2965.82. Single-sided prismatic sliding block, Steel
      2960.79.
      1
      1
      2960.72.
      2960.71.
      2960.70.
      2960.72.
      2960.71.
      2960.70.
      2960.74.
      2960.76.
      2960.79.
      2960.74.
      2960.76.
      2
      2960.72.
      2960.71.
      2960.70.
      1
      2960.73.
      2960.74.
      2960.76.
      2960.79.
      2960.87.
      2960.72.
      2960.71.
      2960.70.
      1
      1
      2960.72.
      2960.71.
      2960.70.
      2
      2052.70.
      2960.74.
      2960.76.
      2960.79.
      2960.74.
      2960.76.
      2960.79.
      2102.70.
      3
      2073.45.
      4
      2960.87.
      subject to alterations
      Mounting Examples
      Oilless Guide Elements
      Pos. 1
      2960.70. Sliding Pad ISO
      2960.71. Sliding Pad VDI
      2960.72. Sliding Pad, small dimensions
      2960.74. Sliding Pad AFNOR
      2960.76. Sliding Pad
      2960.79. Sliding Pad to NAAMS
      Pos. 1
      2960.70. Sliding Pad ISO
      2960.71. Sliding Pad VDI
      2960.72. Sliding Pad, small dimensions
      2960.74. Sliding Pad AFNOR
      2960.76. Sliding Pad
      2960.79. Sliding Pad to NAAMS
      2960.87. Sliding Pad VDI
      Pos. 2
      2960.73. Guide Bracket VDI
      Pos. 1
      2960.70. Sliding Pad ISO
      2960.71. Sliding Pad VDI
      2960.72. Sliding Pad,
       small dimensions
      2960.74. Sliding Pad AFNOR
      2960.76. Sliding Pad
      2960.79. Sliding Pad to NAAMS
      2960.87. Sliding Pad VDI
      Pos. 2
      2052.70. Oilless Guide Bushes
      Pos. 3
      2102.70. Guide Bushes with collar AFNOR
      Pos. 4
      2073.45. Securing Flange
      D250
      5
      2073.45.
      6
      2960.72.
      2960.71.
      2960.70.
      2960.74.
      2961.70.
      3
      2960.90.
      4
      2102.70.
      7
      2960.72.
      2961.70.
      2960.92.
      2
      2960.91.
      1
      2960.70.
      2960.72.
      2960.72.
      1
      2962.70.
      2962.73.
      1
      2962.70.
      2962.73.
      2
      2961.70.
      2
      2961.70.
      3
      2961.79.
      3
      2961.74.
      4 4
      2960.72.
      2961.70.
      2960.72.
      2961.70.
      2961.81.
      2961.78.
      2961.74.
      2961.79.
      2961.81.
      2961.75.
      subject to alterations
      Mounting Examples
      Oilless Guide Elements
      Pos. 1
      2960.70. Sliding Pad ISO
      Pos. 2
      2960.91. Overrun Cam to VDI
      Pos. 3
      2960.90. Overrun cam to VDI
      2960.92. Overrun cam to VDI
      Pos. 4
      2102.70. Guide Bushe with collar
       AFNOR
      Pos. 5
      2073.45. Securing Flange
      Pos. 6
      2960.70. Sliding Pad ISO
      2960.71. Sliding Pad VDI
      2960.72. Sliding Pad,
       small dimensions
      2960.74. Sliding Pad AFNOR
      2961.70. Flat Guide Bar
      Pos. 7
      2960.72. Sliding Pad, small dimensions
      2961.70. Flat Guide Bar
      Pos. 1
      2962.70. Angled Guide Gib
      2962.73. Angled Guide Gib
      Pos. 2
      2960.72. Sliding Pad, small dimensions
      2961.70. Flat Guide Bar
      2961.75.
      Pos. 3
      2961.74. Retaining Plate to VDI
      2961.79.
      2961.81.
      Pos. 4
      2960.72. Sliding Pad, small dimensions
      2961.70. Flat Guide Bar
      2960.79.
      1
      1
      2960.72.
      2960.71.
      2960.70.
      2960.72.
      2960.71.
      2960.70.
      2960.74.
      2960.76.
      2960.79.
      2960.74.
      2960.76.
      2
      2960.72.
      2960.71.
      2960.70.
      1
      2960.73.
      2960.74.
      2960.76.
      2960.79.
      2960.87.
      2960.72.
      2960.71.
      2960.70.
      1
      1
      2960.72.
      2960.71.
      2960.70.
      2
      2052.70.
      2960.74.
      2960.76.
      2960.79.
      2960.74.
      2960.76.
      2960.79.
      2102.70.
      3
      2073.45.
      4
      2960.87.
      subject to alterations
      Mounting Examples
      Oilless Guide Elements
      Pos. 1
      2960.70. Sliding Pad ISO
      2960.71. Sliding Pad VDI
      2960.72. Sliding Pad, small dimensions
      2960.74. Sliding Pad AFNOR
      2960.76. Sliding Pad
      2960.79. Sliding Pad to NAAMS
      Pos. 1
      2960.70. Sliding Pad ISO
      2960.71. Sliding Pad VDI
      2960.72. Sliding Pad, small dimensions
      2960.74. Sliding Pad AFNOR
      2960.76. Sliding Pad
      2960.79. Sliding Pad to NAAMS
      2960.87. Sliding Pad VDI
      Pos. 2
      2960.73. Guide Bracket VDI
      Pos. 1
      2960.70. Sliding Pad ISO
      2960.71. Sliding Pad VDI
      2960.72. Sliding Pad,
       small dimensions
      2960.74. Sliding Pad AFNOR
      2960.76. Sliding Pad
      2960.79. Sliding Pad to NAAMS
      2960.87. Sliding Pad VDI
      Pos. 2
      2052.70. Oilless Guide Bushes
      Pos. 3
      2102.70. Guide Bushes with collar AFNOR
      Pos. 4
      2073.45. Securing Flange
      5
      2073.45.
      6
      2960.72.
      2960.71.
      2960.70.
      2960.74.
      2961.70.
      3
      2960.90.
      4
      2102.70.
      7
      2960.72.
      2961.70.
      2960.92.
      2
      2960.91.
      1
      2960.70.
      2960.72.
      2960.72.
      1
      2962.70.
      2962.73.
      1
      2962.70.
      2962.73.
      2
      2961.70.
      2
      2961.70.
      3
      2961.79.
      3
      2961.74.
      4 4
      2960.72.
      2961.70.
      2960.72.
      2961.70.
      2961.81.
      2961.78.
      2961.74.
      2961.79.
      2961.81.
      2961.75.
      subject to alterations
      Mounting Examples
      Oilless Guide Elements
      Pos. 1
      2960.70. Sliding Pad ISO
      Pos. 2
      2960.91. Overrun Cam to VDI
      Pos. 3
      2960.90. Overrun cam to VDI
      2960.92. Overrun cam to VDI
      Pos. 4
      2102.70. Guide Bushe with collar
       AFNOR
      Pos. 5
      2073.45. Securing Flange
      Pos. 6
      2960.70. Sliding Pad ISO
      2960.71. Sliding Pad VDI
      2960.72. Sliding Pad,
       small dimensions
      2960.74. Sliding Pad AFNOR
      2961.70. Flat Guide Bar
      Pos. 7
      2960.72. Sliding Pad, small dimensions
      2961.70. Flat Guide Bar
      Pos. 1
      2962.70. Angled Guide Gib
      2962.73. Angled Guide Gib
      Pos. 2
      2960.72. Sliding Pad, small dimensions
      2961.70. Flat Guide Bar
      2961.75.
      Pos. 3
      2961.74. Retaining Plate to VDI
      2961.79.
      2961.81.
      Pos. 4
      2960.72. Sliding Pad, small dimensions
      2961.70. Flat Guide Bar
      D251
      2960.72.
      2
      2961.74.
      2961.75.
      2961.78.
      2961.81.
      1
      2961.70.
      1
      2960.72.
      1
      2962.73.
      2
      2962.70.
      2
      4 5
      2
      2961.70.
      1
      2962.76.
      3
      2965.81. 2965.83.
      2960.74.
      subject to alterations
      Mounting Examples
      Oilless Guide Elements
      Pos. 1
      2961.74. Retaining Plate to VDI
      Pos. 2
      2960.72. Sliding Pad, small dimensions
      Pos. 1
      2961.70. Flat Guide Bar
      2960.72. Sliding Pad, small dimensions
      Pos. 2
      2962.70. Angled Guide Gib
      2962.73. Angled Guide Gib
      Pos. 1
      2961.70. Guide Bar
      Pos. 2
      2960.74. Sliding Pad AFNOR
      Pos. 3
      2962.76. Guide Bar with three sliding surfaces
      Pos. 4
      2965.81. Single-sided prismatic Guide (Bronze)
      Pos. 5
      2965.83. Single-sided Prismatic Sliding Block
       (Steel)
      D252
      2960.71.
      2960.87.
      2
      2960.70.
      1
      4 5
      2962.75.
      3
      2963.81. 2963.80.
      subject to alterations
      Mounting Examples
      Oilless Guide Elements
      Pos. 1
      2960.70. Sliding Pad ISO
      Pos. 2
      2960.71. Sliding Pad VDI
      2960.87.
      Pos. 3
      2962.75. Guide Bar with two sliding surfaces
      Pos. 4
      2963.81. Prismatic Guide
      Pos. 5
      2963.80. Sliding Block
      2960.72.
      2
      2961.74.
      2961.75.
      2961.78.
      2961.81.
      1
      2961.70.
      1
      2960.72.
      1
      2962.73.
      2
      2962.70.
      2
      4 5
      2
      2961.70.
      1
      2962.76.
      3
      2965.81. 2965.83.
      2960.74.
      subject to alterations
      Mounting Examples
      Oilless Guide Elements
      Pos. 1
      2961.74. Retaining Plate to VDI
      Pos. 2
      2960.72. Sliding Pad, small dimensions
      Pos. 1
      2961.70. Flat Guide Bar
      2960.72. Sliding Pad, small dimensions
      Pos. 2
      2962.70. Angled Guide Gib
      2962.73. Angled Guide Gib
      Pos. 1
      2961.70. Guide Bar
      Pos. 2
      2960.74. Sliding Pad AFNOR
      Pos. 3
      2962.76. Guide Bar with three sliding surfaces
      Pos. 4
      2965.81. Single-sided prismatic Guide (Bronze)
      Pos. 5
      2965.83. Single-sided Prismatic Sliding Block
       (Steel)
      2960.71.
      2960.87.
      2
      2960.70.
      1
      4 5
      2962.75.
      3
      2963.81. 2963.80.
      subject to alterations
      Mounting Examples
      Oilless Guide Elements
      Pos. 1
      2960.70. Sliding Pad ISO
      Pos. 2
      2960.71. Sliding Pad VDI
      2960.87.
      Pos. 3
      2962.75. Guide Bar with two sliding surfaces
      Pos. 4
      2963.81. Prismatic Guide
      Pos. 5
      2963.80. Sliding Block
      D253
      subject to alterations
      Centering unit with adjusting washer
      Material:
      Centring Units: 16MnCr5, heat treated
      Conical surfaces induction hardened
      Surface hardness: 60 + 4 HRC, Hardness penetration 1,0 + 0,5 mm
      Adjusting washer: C45 or similar
      Note:
      Centring unit complete with adjusting washer.
      Screws are included.
      2441.11.0.□□□
      Centring unit with adjusting washer
      2441.11.0.□□□.1
      Centring unit with one flat side with adjusting washer
      2441.11.0.□□□.2
      Centring unit with two flat sides with adjusting washer
      ø16
      ø25
      20
      l 2
      ±0,05
      l
      11 16
      M5
      l 1
      15 15
      H7
      H7
      ø16
      ø11
      M12
      ø11
      d 3
      d 1
      d 2
      d 5
      k*/2
      k*
      k* = d3
      k*/2 = d3/2
      2441.11.0.
      D254
      Order No d 1 d 2 d 3 l l 1 l 2 d 5
      2441.11.0.100 100 76 58 80 40 55 40.5
      2441.11.0.100.1 100 76 58 80 40 55 40.5
      2441.11.0.100.2 100 76 58 80 40 55 40.5
      2441.11.0.120 120 96 78 90 50 65 50.5
      2441.11.0.120.1 120 96 78 90 50 65 50.5
      2441.11.0.120.2 120 96 78 90 50 65 50.5
      2441.11.0. Centering unit with adjusting washer
      subject to alterations
      Centering unit
      15 15
      20
      M5
      11 16
      H7
      ø16
      ø11
      H7
      ø16
      ø25
      k*/2
      k*
      k* = d3
      k*/2 = d3/2
      ø11
      M12
      d 3
      d 1
      d 2
      d 5
      l 2
      ±0,05
      l
      l 1
      2441.11.
      Material:
      16MnCr5, heat treated
      Conical surfaces induction hardened
      Surface hardness: 60 + 4 HRC, Hardness penetration 1,0 + 0,5 mm
      Note:
      Adjusting washer 2441.11.3. to be ordered separately.
      Screws are not included.
      2441.11.□□□
      Centring unit
      2441.11.□□□.1
      Centring unit with one flat side
      2441.11.□□□.2
      Centring unit with two flat sides
      D255
      Order No d 1 d 2 d 3 l l 1 l 2 d 5
      2441.11.100 100 76 58 80 40 55 40.5
      2441.11.100.1 100 76 58 80 40 55 40.5
      2441.11.100.2 100 76 58 80 40 55 40.5
      2441.11.120 120 96 78 90 50 65 50.5
      2441.11.120.1 120 96 78 90 50 65 50.5
      2441.11.120.2 120 96 78 90 50 65 50.5
      2441.11. Centering unit
      subject to alterations
      Adjusting washer
      Material:
      C45 or similar
      Note:
      2441.11.3.□□□
      Adjusting washer
      2441.11.3.□□□.1
      Adjusting washer with one flat side
      2441.11.3.□□□.2
      Adjusting washer with two flat sides
      d 5
      d 1
      d 2
      +0.1
      d
      ø11
      k*/2 k*
      k* = d3
      k*/2 = d3/2
      c
      2441.11.3.
      D256
      Order No d 1 d 2 d 4 c d 5 k
      2441.11.3.100 100 76 17 9.8 40.5 58
      2441.11.3.100.1 100 76 17 9.8 40.5 58
      2441.11.3.100.2 100 76 17 9.8 40.5 58
      2441.11.3.105 105 76 18 5.5 40.5 58
      2441.11.3.120 120 96 17 9.8 50.5 78
      2441.11.3.120.1 120 96 17 9.8 50.5 78
      2441.11.3.120.2 120 96 17 9.8 50.5 78
      2441.11.3.125 125 96 18 5.5 50.5 78
      2441.11.3. Adjusting washer
      subject to alterations
      Centring unit, CNOMO
      ø18,5
      120°(3x)
      3
      d
      2
      d
      d 5
      M10
      ø10 G6 (2x)
      H13
      ø13 (3x)
      d 2
      d 6
      d 5
      0,5
      h 1 h 3
      0,5
      d 1
      ø11
      ø18
      H13
      ø13 ø10
      (2x) (3x)
      G6
      h 2
      22 22
      4
      d
      ±0,25
      l ( )
      15
      2441.13.45.
      Material:
      X153CrMoV12 (1.2379), hardened 58 ± 2 HRC
      Note:
      Order No for centring unit to CNOMO with adjusting washer:
      2441.13.0.45.
      Screws and pins are not included.
      D257
      Order No d 1 d 2 d 3 d 4 d 5 d 6 h 1 h 2 h 3 l
      2441.13.45.040 40 90 69 45 50 67 36 61 61 (86)
      2441.13.45.060 60 110 89 65 70 89 46 61 61 (86)
      2441.13.45. Centring unit, CNOMO
      subject to alterations
      Adjusting washer, CNOMO
      Material:
      Cf 70 (1.1249)
      Note:
      Adjusting washer for centring unit 2441.13.45.
      5
      120°(3x)
      d 1
      d 2
      d 3
      ø14(3x) ø12(2x)
      2441.13.3.45.
      D258
      Order No d 1 d 2 d 3
      2441.13.3.45.040 40 90 67
      2441.13.3.45.060 60 110 89
      2441.13.3.45. Adjusting washer, CNOMO
      subject to alterations
      Centring unit, CNOMO
      G8
      ø10
      (2x)
      22 22
      15
      ø19
      M10
      d 2
      d 3
      d 4
      d 6
      d 5
      ø11
      h 3 h 1
      h 2
      ±0,25
      l ( )
      d
      18
      H13
      ø13
      (3x)
      1
      2441.13.
      Material:
      16MnCr5, heat treated
      Conical surfaces induction hardened
      Surface hardness: 60 + 4 HRC, Hardness penetration 1,0 + 0,5 mm
      Note:
      Order No for centring unit to CNOMO with adjusting washer: 2441.13.0.
      Screws and pins are not included.
      D259
      Order No d 1 d 2 d 3 d 4 d 5 d 6 h 1 h 2 h 3 (l)
      2441.13.040 40 100 79 50 90 67 36 61 28 (86)
      2441.13.060 60 125 104 70 110 89 46 61 18 (86)
      2441.13. Centring unit, CNOMO
      subject to alterations
      Adjusting washer, CNOMO
      Material:
      100 Cr 6
      Note:
      Adjusting washer for centring unit 2441.13.
      3x120°
      d 2
      d 3
      5
      ø12 (2x) ø15 (3x)
      d 1
      2441.13.3.
      D260
      Order No d 1 d 2 d 3
      2441.13.3.040 40 90 67
      2441.13.3.060 60 110 89
      2441.13.3. Adjusting washer, CNOMO
      subject to alterations
      Centring pin
      3
      R3
      2445.10.
      Description:
      Using locating holes components, assemblies and tools can be repea-
      tedly centred with high precision on processing machines, measuring
      equipment and tool components.
      Material:
      Steel, hardened
      Note:
      Screws are not included.
      1) to BMW standard
      2) to VW standard
      Fixing:
      Use socket cap screws DIN EN ISO 4762 M6/M8.
      20
      +min.1
      1
      d
      H7
      1
      d
      25
      Mounting example Mounting example
      D261
      Order No d 1 d 2 d 3 l 1 l 2 l 3 r 1
      2445.10.022.045 1), 2) 22 21.95 M8 45 16 35 15
      2445.10.022.055 2) 22 21.95 M8 55 16 45 15
      2445.10.032.050 1) 32 31.95 M10 50 20 35 20
      2445.10.040.055 1), 2) 40 39.95 M10 55 20 35 25
      2445.10.040.065 2) 40 39.95 M10 65 20 45 25
      2445.10.050.055 1) 50 49.95 M10 55 20 35 25
      2445.10.056.080 1) 56 55.95 M10 80 20 60 30
      2445.10. Centring pin
      subject to alterations
      Centring pin to Mercedes-Benz standard
      Description:
      Using locating holes components, assemblies and tools can be repea-
      tedly centred with high precision on processing machines, measuring
      equipment and tool components.
      Material:
      Steel, hardened
      Note:
      Screws are not included.
      Fixing:
      Use socket cap screws DIN EN ISO 4762 M6/M8.
      H7
      d
      25
      50
      15°
      3
      d
      4
      d
      1
      d
      j6
      d
      2
      d
      5
      1
      t
      t
      2x45°
      8
      2445.11.
      Mounting example Mounting example
      D262
      Order No d d 1 d 2 d 3 d 4 t t 1
      2445.11.022 22 11 M8 9 16 13 16
      2445.11.025 25 11 M8 9 18 13 16
      2445.11.032 32 11 M8 9 25 13 16
      2445.11.040 40 15 M10 11 32 16 20
      2445.11.050 50 15 M10 11 42 16 20
      2445.11. Centring pin to Mercedes-Benz
      standard
      subject to alterations
      Pressure bolt with base, according to VW
      32,5 65
      R20
      20
      12
      20
      65
      ø13
      ø36
      +2
      ø16 -0,1
      -0,3
      ø90 ±1
      65
      20
      ø20
      1x45°
      ±0,05
      *l
      1x45°
      5
      0
      -2
      40
      R8 +2
      20
      R8 +2
      R8 +2
      2446.10.55.03.
      2446.10.55.02.
      2446.10.55.04.
      2446.10.55.05.
      Description:
      Pressure bolts with base are used to transfer force from the pressure
      cushion of the press to the tool.
      Material:
      C45 (1.0503), heat-treated 800 - 1000 N/mm 2
      Execution:
      drop-forged
      Note:
      Screws are not included.
      D263
      Order No l*
      Gradation
      l
      2446.10.55.02. 150 - 360 1
      2446.10.55.03. 150 - 360 1
      2446.10.55.04. 150 - 360 1
      2446.10.55.05. 150 - 360 1
      *to customer’s specifications!
      Ordering Code (example):
      Pressure bolt with base, according to VW =2446.10.55.
      Execution Shape 2 = 02.
      Length l 150 mm = 150
      Order No =2446.10.55. 02. 150
      2446.10.55. Pressure bolt with base, according to VW
      subject to alterations
      Air pin, according to VW standard
      Description:
      Air pins are used to transfer force from the pressure cushion of the press
      to the tool.
      Material:
      C45 (1.0503), heat-treated 800 - 1000 N/mm 2
      Execution:
      drop-forged
      Note:
      Screws are not included.
      20
      12
      ø60
      +2
      ø110
      ±1
      ø20
      ø13
      ø16
      -0,1
      -0,3
      ±0,1
      *l
      2x45°
      1x45°
      5
      R3
      35
      3x120°
      ø85
      3x120°
      ø85
      2446.11.55.01.
      2446.11.55.02.
      D264
      Order No l*
      Gradation
      l
      2446.11.55.01. 150 - 440 1
      2446.11.55.02. 150 - 440 1
      *to customer’s specifications!
      Ordering Code (example):
      Air pin, according to VW standard =2446.11.55.
      Execution Shape 1 = 01.
      Length l 150 mm = 150
      Order No =2446.11.55. 01.150
      2446.11.55. Air pin, according to VW standard
      subject to alterations
      Concertina shroud with spacer bush
      1
      l
      max.
      a
      1
      a
      i
      3
      d
      a
      D
      D
      2
      d
      1
      d
      l
      min.
      l
      206.91.
      Note:
      Concertina Shrouds are supplied complete with spacer bush and two
      hose clamps.
      Special sizes on request.
      Mounting example
      D265
      for guide bushes 2051. 2061. 2051. 2061. 2051. 2061. 2051. 2061. 2051. 2061. 2051. 2061. 2051. 2061. 2081. 2081. 2081. 2081. 2081. 2081. 2081.
      Pillar-ø d 1 19 20 24 25 30 32 38 40 48 50 60 63 19 20 24 25 30 32 38 40 48 50 60 63
      d* 20 25 32 40 50 60 63 20 25 32 40 50 60 63
      d 2 25 30 40 50 60 70 70 25 30 40 50 60 70 70
      d 3 32 38 46 55 64 76 76 39 45 54 63 74 94 94
      d 4 ** 32 38 48 58 58 79 79 40 45 54 66 80 95 95
      D i 30 30 46 55 62 75 75 32 32 45 52 62 75 75
      D a 51 56 72 87 86 100 100 54 56 63 96 84 104 104
      a 13 13 20 12 12 12 12 10 10 10 12 12 10 10
      a 1 16 13 20 12 12 10 10 10 10 10 12 12 10 10
      l 1 20 30 30 40 40 40 40 20 30 30 40 40 40 40
      l min 30 25 20 44 25 30 30 37 35 35 25 45 35 35
      l max 170 130 100 119 110 130 130 145 110 110 225 165 185 185
      *d = Nominal diameter, **d 4 = Nominal ordering diameter for flange diameter
      Ordering Code (example):
      Concertina shroud with spacer bush =206.91.
      Nominal diameter d 20 mm = 020.
      Nominal ordering diameter for flange diameter d 4 32 mm = 032
      Order No =206.91. 020. 032
      206.91. Concertina shroud with spacer bush
      subject to alterations
      Spacer bush
      Spacer tube
      Material:
      PMMA, PLEXIGLAS®
      Material:
      PMMA, PLEXIGLAS®
      1 l
      1
      d
      2
      d
      206.93.
      100
      1
      d
      2
      d
      206.94.
      D266
      Ordering Code (example):
      Spacer bush =206.93.
      Nominal diameter d 16 mm= 016
      Order No =206.93. 016
      Ordering Code (example):
      Spacer tube =206.94.
      Nominal diameter d 16 mm= 016
      Order No =206.94. 016
      Pillar-ø d 1 15 16 19 20 24 25 30 32 38 40 48 50 60 63
      d* 16 20 25 32 40 50 60 63
      d 2 20 25 30 40 50 60 70 70
      l 1 20 20 30 30 40 40 40 40
      *d = Nominal diameter
      Pillar-ø d 1 15 16 19 20 24 25 30 32 38 40 48 50 60 63
      d* 16 20 25 32 40 50 60 63
      d 2 20 25 30 40 50 60 70 70
      l 1 100 100 100 100 100 100 100 100
      *d = Nominal diameter
      206.93.
      206.94.
      Spacer bush
      Spacer tube
      subject to alterations
      Concertina shroud with spacer tube
      D
      100
      d
      1
      d
      a
      3
      d
      D
      2
      a
      1
      a
      max.
      l
      min.
      l
      i
      206.92.
      Note:
      Concertina Shrouds are supplied complete with spacer tube and two
      hose clamps.
      Special sizes on request.
      Mounting example
      D267
      for guide bushes 2051. 2061. 2051. 2061. 2051. 2061. 2051. 2061. 2051. 2061. 2051. 2061. 2051. 2061. 2081. 2081. 2081. 2081. 2081. 2081. 2081.
      Pillar-ø d 1 19 20 24 25 30 32 38 40 48 50 60 63 19 20 24 25 30 32 38 40 48 50 60 63
      d* 20 25 32 40 50 60 63 20 25 32 40 50 60 63
      d 2 25 30 40 50 60 70 70 25 30 40 50 60 70 70
      d 3 32 38 46 55 64 76 76 39 45 54 63 74 94 94
      d 4 ** 32 38 48 58 58 79 79 40 45 54 66 80 95 95
      D i 30 30 46 55 62 75 75 32 32 45 52 62 75 75
      D a 51 56 72 87 86 100 100 54 56 63 96 84 104 104
      a 13 13 20 12 12 12 12 10 10 10 12 12 10 10
      a 1 16 13 20 12 12 10 10 10 10 10 12 12 10 10
      l 1 100 100 100 100 100 100 100 100 100 100 100 100 100 100
      l min 30 25 20 44 25 30 30 37 35 35 25 45 35 35
      l max 170 130 100 119 110 130 130 145 110 110 225 165 185 185
      *d = Nominal diameter, **d 4 = Nominal ordering diameter for flange diameter
      Ordering Code (example):
      Concertina shroud with spacer tube =206.92.
      Nominal diameter d 20 mm = 020.
      Nominal ordering diameter for flange diameter d 4 32 mm = 032
      Order No =206.92. 020. 032
      206.92. Concertina shroud with spacer tube
      subject to alterations
      Helical spring for ball cage retention
      Calculation:
      Formula for selecting spring 241.18.:
      F L = [l - (l 2 + (l 1 - l 3 ))] x 1,1
      Formula for calculating the block length L BL of the selected spring:
      L BL = ( l 0 x d : s) + 2 x d
      F L = Length of compressed spring
      l = Length of guide pillar (Customer specified)
      l 1 = Cage length (Customer specified)
      l 2 = Compression length of guide pillar (Customer specified)
      l 3 = Ball cage retainer size (Customer specified)
      1.1 = Safety factor
      l 0 = Length of uncompressed spring
      d = Spring wire diameter
      s = Pitch
      Without ball cage
      retainer
      With ball cage
      retainer
      202.91.
      With ball cage
      retainer
      202.91.
      3
      l
      1
      l
      2
      l
      l
      L
      F
      Without ball cage
      retainer
      With ball cage
      retainer
      202.92.1.
      With ball cage
      retainer
      202.92.1.
      ø pillar d?
      d
      s
      0 l
      2 d
      3 d
      241.18.
      Mounting example Mounting example
      D268
      d 1 d 2 d 3 s d l 0 Gradation l 0
      19/20 20.5 22.5 14 1 40 - 140 10
      24/25 25.5 27.9 14 1.2 40 - 160 10
      30/32 32.5 35.7 16 1.6 50 - 230 10
      38 38.5 42.5 18 2 60 - 230 10
      40 40.5 45.1 20 2.3 60 - 230 10
      48/50 50.5 55.7 20 2.6 70 - 280 10
      60 60.5 66.9 20 3.2 80 - 250 10
      63 63.5 69.9 20 3.2 80 - 250 10
      Ordering Code (example):
      Helical spring for ball cage retention =241.18.
      Inside diameter d 2 20.5 mm = 205.
      Length l 0 40 mm = 040
      Order No =241.18. 205.040
      241.18. Helical spring for ball cage retention
      subject to alterations
      Cage retainer
      2
      d
      M6
      DIN EN ISO
      4762
      202.91.
      Note:
      The following guide pillars can be equipped with this cage retainer.
      Guide pillars without cage retainer - become guide pillars with cage
      retainer:
      202.19. - 202.17.
      202.21. - 202.55.
      2021.46. - 2021.44.
      2021.50. - 2021.58.
      2
      d
      4 l
      min.
      20
      1
      l
      15
      ø10
      +0,1
      ø17
      M6
      1
      d
      Mounting example
      D269
      d 1 38 40 48 50 60 63
      d 2 42 44 52 54 64 67
      KG (l / l 1 )
      1 (31 / 46) ● ● ● ● ● ●
      2 (41 / 56) ● ● ● ● ● ●
      3 (51 / 66) ● ● ● ● ● ●
      4 (61 / 76) ● ● ● ● ● ●
      5 (73 / 89) ● ● ● ● ● ●
      Ordering Code (example):
      Cage retainer =202.91.
      Guide diameter d 1 38 mm = 038.
      Cage retainer size KG 1 = 1
      Order No =202.91. 038. 1
      202.91. Cage retainer
      subject to alterations
      Cage retainer
      Note:
      The following guide pillars can be equipped with this cage retainer:
      202.22.
      202.24.
      2021.46.
      2021.50.
      3
      l
      l 2
      cage travel
      = stroke/2 2
      202.92.1
      1
      d
      1
      l
      order separately:
      206.75. Ball Cage
      2060.65. Ball Cage
      202.92.1.
      8
      2
      d
      M8
      2
      f
      Mounting example
      D270
      d 1 19 20 24 25 30 32 38 40 48 50 60 63
      d 2 18 19 23 24 29 31 37 39 47 49 59 62
      f 22 23 27 28 34 36 42 44 52 54 64 67
      Ordering Code (example):
      Cage retainer =202.92.1.
      Guide diameter d 1 19 mm = 019
      Order No =202.92.1. 019
      202.92.1. Cage retainer
      subject to alterations
      Cage retainer
      9
      3
      d
      2
      d
      ø9
      ø15
      1
      l
      2
      l
      cage travel
      = stroke/2
      202.93.
      Note:
      The following guide pillars can be equipped with this cage retainer:
      202.22.
      202.24.
      2021.46.
      2021.50.
      Screws are not included.
      Fixing:
      Use socket cap screws DIN EN ISO 4762 for ordering size:
      03. - 2192.12.08.035
      04. - 2192.12.08.045
      05. - 2192.12.08.055
      06. - 2192.12.08.070
      08. - 2192.12.08.090
      cage travel = stroke 1/2
      2 l
      3
      1
      d
      2
      d
      d
      M8
      1 l
      202.93.
      Mounting example
      D271
      Order No d 1 d 2 d 3 l 1 l 2
      202.93.03.030 30 32 36 23 30 6
      202.93.04.040 38 40 44 31 40 6
      202.93.05.050 48 50 54 39 50 8
      202.93.06.060 60 63 66 51 60 8
      202.93.08.080 80 89 71 80 8
      202.93. Cage retainer
      subject to alterations
      Pillar wiper
      Description:
      FIBRO Pillar Wipers protect against premature wear caused by the
      ingress of dirt into the die set guides.
      Outside diameters match boss dias. on FIBRO Die Sets (Cast Iron). They
      can be fitted onto the bolster, or into a counterbore – flush with the
      bolster surface.
      Note:
      Pillar Wipers will be delivered with 3 screws M 4 × 16 DIN 963.
      8,5
      3
      d
      1
      d
      2
      d
      206.95.
      2061.95.
      Mounting example
      D272
      Order No d 1 d 2 d 3
      206.95.024 24 45 55
      206.95.025 25 45 55
      206.95.030 30 55 65
      206.95.032 32 55 65
      206.95.038 38 65 75
      206.95.040 40 65 75
      206.95.042 42 65 75
      206.95.048 48 78 94
      206.95.050 50 78 94
      206.95.052 52 78 94
      206.95.060 60 92 110
      206.95.063 63 92 110
      2061.95.024 24 50 60
      2061.95.025 25 50 60
      206.95./2061.95. Pillar wiper
      subject to alterations
      Lifter pin for press tool strips
      10 3
      8
      h6 1
      d
      3
      d
      2
      d
      4
      d
      h
      D
      3
      1
      l
      244.00.2.
      Description:
      Combination progression dies with certain forming stages can be
      equipped advantageously with springloaded lifter pins. FIBRO Lifter Pins
      244.00.2., available in four sizes, can be used to assume the double
      function of lifting and guiding the strip. The amount of lift is a function
      of the counterbore-depth.
      Material:
      No 1.7131, case-hardened
      Execution:
      ground
      Note:
      For ordering code of screw plug 241.00.1. and helical spring see spring
      range on pages chapter F.
      Mounting example
      D273
      d 1 8 10 13 16
      d 2 5 6 7 8
      d 3 10 12 16 20
      D h 10.5 12.5 16.5 20.5
      d 4 M12x1.5 M14x1.5 M18x1.5 M22x1.5
      l 1
      20 ●
      25 ● ● ●
      32 ● ● ● ●
      40 ● ● ● ●
      50 ● ● ●
      Ordering Code (example):
      Lifter pin for press tool strips =244.00.2.
      Guide diameter d 1 8 mm = 08.
      Guide length l 1 20 mm = 020
      Order No =244.00.2. 08. 020
      244.00.2. Lifter pin for press tool strips
      subject to alterations
      Screw clamp with screw
      15
      8,7
      6
      8,5
      13
      207.45
      7
      19,5
      11
      5,8 +0,1
      ø7
      ø16
      ø11
      ø23
      2071.45
      7,5
      11
      32
      5
      10
      10
      32
      3
      6,3
      20
      5
      20
      10
      16
      2072.45.10 2072.45.16
      Screw clamp
      incl. screw
      – steel punched bent component
      – clamping height 6-6,3 mm
      – M6 screw
      Screw clamp
      incl. screw
      – clamping height 6 mm
      – M6 screw
      Screw clamp
      incl. screw
      2072.45.10
      – steel, milled
      – clamping height 6-6,3 mm
      – M6 screw
      2072.45.16
      – steel, milled
      – clamping height 10 mm
      – M10 screw
      D274
      subject to alterations
      Screw clamp with screw
      Screw clamp with screw, GM Standard
      Screw clamp with screw, NAAMS
      Screw clamp
      incl. screw
      – steel, milled
      – clamping height 6-6,3 mm
      – M10 screw
      Screw clamp
      according to GM, incl. screw
      2072.46.30.12
      – steel, milled
      – clamping height 6 mm
      – M8 screw
      2072.46.30.16
      – steel, milled
      – clamping height 6 mm
      – M10 screw
      Screw clamp
      according to NAAMS, incl. screw
      – steel punched bent component
      – clamping height 6-6,3 mm
      – M8 screw
      6
      11
      32
      5
      10
      32
      16
      2072.46
      ø11,5
      ø9
      11,5
      8,5
      10
      5
      21
      25 32
      15
      20
      25
      ø15 ø18
      12
      16
      6 -0,3
      0,5 +0,5
      6 -0,3
      0,5 +0,5
      2072.46.30.12 2072.46.30.16
      13,5
      18,9
      24,6
      5
      6
      13
      2072.47
      D275
      subject to alterations
      Securing flange with screws, CNOMO
      Screw clamp with screw, CNOMO
      Securing flange
      according to CNOMO, incl. screws
      – steel, turned
      – clamping height 4, 5, 6, 8, 10, 12, 16, 20 mm
      – M6, M8, M10, M12 screws
      Screw clamp
      according to CNOMO, incl. screw
      – steel, milled
      – clamping height 8, 10, 12, 16, 20 mm
      – M6, M8, M10 screw
      e 1
      4
      d
      e 2
      e 3
      5
      3
      l
      h
      3
      d
      5
      d
      6
      d
      d 1 G7
      d 2
      M6
      m6
      M
      A A
      „ A “
      2073.45.
      m
      p
      m
      k
      t
      e
      n
      3
      d
      2
      d
      A A
      „ A “
      2072.48.45.
      D276
      Order No d 1 d 2 d 3 d 4 d 6 h l 3 e 1 e 2 e 3 M
      2073.45.020 20 28 32 63 25 10 4 16 18 - 6x16
      2073.45.025 25 35 40 72 32 10 5 20 20 - 6x16
      2073.45.032 32 44 50 80 40 12 6 25 21 - 6x16
      2073.45.040 40 52 60 100 50 12 8 38.5 14 41 6x16
      2073.45.050 50 63 71 125 63 16 10 46 17 49 8x20
      2073.45.063 63 80 90 140 80 20 12 55 17 57.5 10x25
      2073.45.080 80 100 112 180 100 25 16 70 20 72 12x30
      2073.45.100 100 125 140 200 125 32 20 81 25 85 12x30
      Order No k e d 2 d 3 t m p n d 1 M
      2072.48.45.12 12 8 11 6.6 6.8 18 9.5 15.5 40 6x16
      2072.48.45.16 16 10 15 9 9 22 12 19 50 8x20
      2072.48.45.20 20 12 18 11 11 26 15 21 63 10x25
      2072.48.45.25 25 16 18 11 11 26 15 21 80 10x30
      2072.48.45.32 32 20 18 11 11 26 15 21 100 10x35
      2073.45.
      2072.48.45.
      Securing flange with screws,
      CNOMO
      Screw clamp with screw,
      CNOMO
      subject to alterations D277
      subject to alterations
      Spacer plate toothed, with adjusting plate
      Material:
      Spacer plates: X 210 Cr 12 (1.2080), hardened 58 + 2 HRC
      Adjusting plate: X 153 CrMoV 12 (1.2379)
      Description:
      For spacing out sheet metal retainers in tools for external skin parts.
      Note:
      Screws are not included.
      '0'= basic setting in the middle (grinding-in)
      '+'= adjustment to the right - plus
      '-' = adjustment to the left - minus
      NB: Hole pattern
      The bolsters are reversible.
      Adjustment range:
      2444.12
      12 increments each of 0.02 mm means an adjusting range of 0.24 mm
      with a minimum support area of 80 x 60 mm.
      2444.13
      14 increments each of 0.02 mm means an adjusting range of 0.28 mm
      with a minimum support area of 100 x 80 mm.
      11
      M10
      20
      11
      5
      0°14'13"
      l 2
      l 3
      H
      H 1
      35
      0
      0
      l 1
      21
      4
      35
      ø18
      ø11
      M10x20 DIN EN ISO 4762
      M10x20
      DIN EN ISO 4762
      A - A
      l 4
      l 5
      l 6
      l 7
      18
      b 1
      b
      A A
      11
      21
      ø18
      ø11
      Basis: 0.02 mm per tooth
      M10x20
      DIN EN ISO 4762
      2444.12 / 2444.13
      D278
      Order No l 1 l 2 l 3 l 4 l 5 l 6 l 7 b b 1 H H 1
      2444.12 130 90 130 61 72 79 90 60 30 15.5 16.04
      2444.13 160 110 160 71 82 89 120 80 40 15.5 16.16
      2444.12 / 2444.13 Spacer plate toothed, with adjusting plate
      subject to alterations
      Guide
      ø8 +0,1
      13,5
      1,5
      8
      min.ø40
      ø30
      20°
      13
      R20
      107
      M12
      20
      l
      30
      26 26
      R10
      Rounded transition R5
      2443.10.
      Material:
      Ck 60, hardened 58 + 2 HRC
      Execution:
      forged
      D279
      Order No l
      2443.10.065 65
      2443.10.090 90
      2443.10.120 120
      2443.10.150 150
      2443.10.180 180
      2443.10.250 250
      2443.10.300 300
      2443.10.350 350
      2443.10. Guide
      subject to alterations
      Guide to Mercedes-Benz Standard - unhardened
      Material:
      Ck 60
      Execution:
      forged
      Note:
      Guides are preferably used in confined spaces in sequential compound
      dies.
      54,5
      63
      73
      20
      15
      l 9
      1,5
      10
      min.ø30
      M8
      R10
      R20
      ø20
      20°
      ø6,1
      27,5
      15
      Rounded transition R5
      2443.10.20.
      D280
      Order No l
      2443.10.20.065 65
      2443.10.20.090 90
      2443.10.20. Guide to Mercedes-Benz Standard - unhardened
      subject to alterations
      Guide to Mercedes-Benz Standard - hardened
      54,5
      63
      73
      20
      15
      l 9
      1,5
      10
      min.ø30
      M8
      R10
      R20
      ø20
      20°
      ø6,1
      27,5
      15
      Rounded transition R5
      2443.10.20. .1
      Material:
      Ck 60, hardened 58 + 2 HRC
      Execution:
      forged
      Note:
      Guides are preferably used in confined spaces in sequential compound
      dies.
      D281
      Order No l
      2443.10.20.065.1 65
      2443.10.20.090.1 90
      2443.10.20. .1 Guide to Mercedes-Benz Standard - hardened
      subject to alterations
      Guide with part position control and spring
      2018.00.60.08.030
      Mounting example
      Material:
      Guide: Ck 60, hardened 50 + 5 HRC
      Flap: St 37
      Spring: Spring steel wire
      Execution:
      forged
      Note:
      See following pages for accessories.
      Rounded
      transition R5
      30
      20
      107
      l
      l 1
      l 2
      8
      ø6,5
      40
      10
      58
      R4,5
      Thickness
      8mm
      Version with short flap:
      l = 120, 150 mm
      1)
      15°
      40
      10
      ø6,5
      8
      108
      32
      rounded
      Thickness
      8mm
      Version with long flap:
      l = 180, 250 mm
      2)
      M12
      R10
      13
      20°
      R20
      ø8 +0,1
      13,5
      8
      26 26
      min.ø40
      ø30
      2443.12.
      D282
      Order No l l 1 l 2
      2443.12.120 120 55 70
      2443.12.150 150 55 70
      2443.12.180 180 105 120
      2443.12.250 250 105 120
      2443.12. Guide with part position control and spring
      subject to alterations
      Guide with part position control, VDI
      M8x1
      ø30
      80°
      40
      10
      ø6,5
      10
      5x45°
      10
      61
      30
      ø6,2
      27
      16,5
      l
      18
      36
      26
      35,5
      108
      Version with short flap:
      l = 120, 150 mm
      1)
      Version with long flap:
      l = 180, 250 mm
      2)
      100
      20
      7
      28
      M12
      13
      20°
      R20
      l 1
      l 2
      R10
      103
      Rounded
      transition R5
      ø6,2
      5x45°
      30x30°
      R4
      R4
      min.ø40
      ø8 +0,1
      13,5
      1,5
      8
      30
      26 26
      2443.13.
      Material:
      Guide: Ck 60, hardened 50 + 5 HRC
      Flap: St 37, hardened 58 + 2 HRC
      Execution:
      forged
      Note:
      See following pages for accessories.
      2018.00.60.08.030
      Mounting example
      D283
      Order No l l 1 l 2
      2443.13.120 120 55 70
      2443.13.150 150 55 70
      2443.13.180 180 105 120
      2443.13.250 250 105 120
      2443.13. Guide with part position control, VDI
      subject to alterations
      Inductive proximity switch
      Technical data:
      Rated operating voltage Ue: 24 V DC
      Operating Voltage Us: 10-30 V DC
      No load current I 0 damped/undamped: ≤ 8 mA/≤ 1 mA
      Repeat accuracy R: ≤ 5%
      Ambient temperature Ta: -40 to +85 °C
      Switching frequency f: 3000 Hz
      Degree of protection to IEC 529: IP 67
      Casing material: Stainless steel
      Connection: plug connector
      Approvals: UL
      2018.00.60.08.030
      M8x1
      LED
      19,5
      30
      A/F 13
      D284
      2018.00.60.08.030 Inductive proximity
      switch
      subject to alterations
      Cable - straight
      Cable , 90° connector
      2018.00.60.23.01.5
      M8x1
      X
      ø10
      30
      22,5
      40
      X
      2018.00.60.23.02.5
      ø10
      M8x1
      X
      17
      8
      26
      X
      Technical data:
      Cable type: 3 pole, M8, oil resistant
      Standard length: 5 m
      Other lengths on request
      Technical data:
      Cable type: 3 pole, M8, oil resistant
      Standard length: 5 m
      Other lengths on request
      D285
      2018.00.60.23.01.5
      2018.00.60.23.02.5
      Cable - straight
      Cable , 90° connector
      subject to alterations D286
      subject to alterations
      Position monitor for boards
      110
      70
      ø19
      110
      12
      21
      105
      9
      15
      70 l
      39
      54
      80
      54,5
      21
      14,5
      l
      ø19
      54
      39
      80
      12
      105
      21 54,5
      14,5
      21
      9
      15
      Shape A Shape B
      2443.14.55.
      Material:
      Steel
      Note:
      See following pages for accessories.
      Attention:
      At least two position monitors must be installed crosswise. In case of
      large parts, such as the side part, a third position monitor should be
      placed. The position monitors should be placed in such a way that a
      perfect querying of the sheet metal part is guaranteed. Position moni-
      tors should be arranged a minimum of 5 mm away from the pulling or
      locking bards and not within the range of strong sheet movement.
      2443.14.00.60.23.02.5
      2443.14.00.60.23.01.5
      2443.14.00.60.18.044
      Mounting example
      D287
      Order No l Shape
      2443.14.55.01 145 A
      2443.14.55.02 145 B
      2443.14.55.03 185 A
      2443.14.55.04 185 B
      2443.14.55.25 225 A
      2443.14.55.26 225 B
      2443.14.55. Position monitor for boards
      subject to alterations
      Inductive proximity switch
      Technical data:
      Rated operating voltage Ue: 24 V DC
      Operating Voltage Us: 10-30 V DC
      No load current I 0 damped/undamped: ≤ 10 mA/≤ 3 mA
      Repeat accuracy R: max. (% v. Sr) 5%
      Ambient temperature Ta: -25 to +70°C
      Switching frequency f: max. 1000 Hz
      Degree of protection to IEC 60529: IP 67
      Casing material: CuZn
      Connection: plug connector
      Approvals: UL
      15
      11
      44,5
      29,5
      M18x1
      M12x1
      25 Nm 35 Nm
      LED SW24
      2443.14.00.60.18.044
      D288
      2443.14.00.60.18.0 44 Inductive proximity
      switch
      subject to alterations
      Cable - straight
      Cable, 90° connector
      M12x1
      ø14,5
      ø4,5
      ±0,15
      44
      X
      „X”
      2443.14.00.60.23.01.5
      38,2
      ø14,5
      M12x1
      27
      ø4,5
      ±0,15
      2443.14.00.60.23.02.5
      Technical data:
      Cable type: 3 pole, M12x1
      Standard length: 5m
      Other lengths on request
      Technical data:
      Cable type: 3 pole, M12x1
      Standard length: 5m
      Other lengths on request
      D289
      2443.14.00.60.23.01 .5
      2443.14.00.60.23.0 2.5 Cable, 90° connector
      Cable - straight
      subject to alterations
      Loading Diagram for Ball Bearing Guides
      27 21 15 12 9 6 3
      30 24 18 2 . H nf = v
      .
      [m . min ]
      -1
      0 20 40 60 80 100 120 140
      1
      10
      4
      10
      2
      10
      3
      10
      [h]
      [% of C]
      bearing life L h
      Max loading Q
      Formula for calculation of
      nominal bearing life
      f s
      50
      nf = strokes per minute [H . min -1 ]
      C = dynamic load [N]
      f = impact factor 1
      F = radial load acting on guide [N]
      2 . H nf
      .
      [m . min ]
      -1
      v =
      s
      L =
      h
      000 m
      2 . H nf
      .
      .
      C
      . F
      3
      H = stroke length [mm]
      [h]
      1000
      F
      Q =
      C
      . 100 [% von C]
      Bearing Life versus Loading:
      Values shown are based on the Impact Factor of f s = 1
      Application to normal conditions in respect of Press and die set,
      with a maximum bearing temperature of 100 °C
      D290
      8 40 450
      10 40 1630
      10 56 2210
      11 40 1660
      11 56 2250
      12 40 1680
      12 56 2280
      15 45 3300
      15 56 4050
      15 63 4550
      15 71 4950
      16 24 1910
      16 28 2230
      16 45 3350
      16 56 4100
      16 63 4600
      16 71 5000
      19 31 3050
      19 45 4050
      19 56 4950
      19 71 6100
      19 80 6600
      19 95 7600
      20 24 2320
      20 28 2700
      20 31 3100
      20 45 4100
      20 56 5000
      20 71 6100
      20 80 6600
      20 95 7600
      24 31 3150
      24 40 3850
      24 45 4200
      24 56 5100
      24 71 6300
      24 80 6800
      24 95 7800
      24 120 9300
      25 31 3200
      25 40 3900
      25 45 4200
      25 56 5200
      25 71 6300
      25 80 6900
      25 95 7900
      25 120 9300
      30 40 5700
      30 45 6400
      30 50 7000
      30 56 7600
      30 71 9300
      30 75 9800
      30 80 10400
      30 95 11900
      30 105 12800
      30 120 14200
      30 140 16000
      30 160 17700
      32 40 5800
      32 45 6400
      32 50 7100
      32 56 7700
      32 71 9400
      32 75 9900
      32 80 10500
      32 95 12000
      32 105 12900
      32 120 14300
      32 140 16100
      32 160 17800
      38 45 7500
      38 50 8200
      38 56 8900
      38 63 10300
      38 80 12100
      38 95 13900
      38 105 15000
      38 120 16700
      38 140 18700
      38 160 20700
      38 180 22600
      38 200 24400
      38 240 28000
      40 45 7500
      40 50 8200
      40 56 9000
      40 63 10300
      40 80 12200
      40 95 14000
      40 105 15100
      40 120 16700
      40 140 18800
      40 160 20800
      40 180 22700
      40 200 24600
      40 240 28000
      48 50 9400
      48 63 11700
      48 80 13800
      48 95 15900
      48 105 17100
      48 120 19000
      48 140 21400
      48 160 23600
      48 180 26000
      48 200 28000
      48 240 32000
      50 50 9400
      50 63 11700
      50 80 13900
      50 95 15900
      50 105 17200
      50 120 19100
      50 140 21400
      50 160 23700
      50 180 26000
      50 200 28000
      50 240 32000
      60 95 17700
      60 105 19200
      60 120 21300
      60 140 23900
      60 160 26500
      60 180 29000
      60 200 31000
      60 240 35500
      63 95 17800
      63 105 19300
      63 120 21300
      63 140 24000
      63 160 26500
      63 180 29000
      63 200 31500
      63 240 35500
      80 120 41000
      80 140 46500
      80 160 52000
      80 180 57000
      80 200 62000
      80 240 70000
      subject to alterations
      Safe Loads for FIBRO Ball Bearing Guides
      Tables of Dynamic Load Indexes
      Definition:
      The dynamic load index C constitutes a constant loading that will allow the respective sizes of ball bearing guides to reach + 10 5 m without any discernible
      bearing damage. The load index is shown in N and results from tests executed with batches of sufficient size, subjected to linear travel oscillations and
      radially imposed loads of constant magnitude and unchanging direction.
      Pillar [ d 1 Cage length l 1
      Dynamic Load Index C
      for whole cage (N)
      Pillar [ d 1 Cage length l 1
      Dynamic Load Index C
      for whole cage (N)
      subject to alterations
      Loading Diagram for Ball Bearing Guides
      27 21 15 12 9 6 3
      30 24 18 2 . H nf = v
      .
      [m . min ]
      -1
      0 20 40 60 80 100 120 140
      1
      10
      4
      10
      2
      10
      3
      10
      [h]
      [% of C]
      bearing life L h
      Max loading Q
      Formula for calculation of
      nominal bearing life
      f s
      50
      nf = strokes per minute [H . min -1 ]
      C = dynamic load [N]
      f = impact factor 1
      F = radial load acting on guide [N]
      2 . H nf
      .
      [m . min ]
      -1
      v =
      s
      L =
      h
      000 m
      2 . H nf
      .
      .
      C
      . F
      3
      H = stroke length [mm]
      [h]
      1000
      F
      Q =
      C
      . 100 [% von C]
      Bearing Life versus Loading:
      Values shown are based on the Impact Factor of f s = 1
      Application to normal conditions in respect of Press and die set,
      with a maximum bearing temperature of 100 °C
      8 40 450
      10 40 1630
      10 56 2210
      11 40 1660
      11 56 2250
      12 40 1680
      12 56 2280
      15 45 3300
      15 56 4050
      15 63 4550
      15 71 4950
      16 24 1910
      16 28 2230
      16 45 3350
      16 56 4100
      16 63 4600
      16 71 5000
      19 31 3050
      19 45 4050
      19 56 4950
      19 71 6100
      19 80 6600
      19 95 7600
      20 24 2320
      20 28 2700
      20 31 3100
      20 45 4100
      20 56 5000
      20 71 6100
      20 80 6600
      20 95 7600
      24 31 3150
      24 40 3850
      24 45 4200
      24 56 5100
      24 71 6300
      24 80 6800
      24 95 7800
      24 120 9300
      25 31 3200
      25 40 3900
      25 45 4200
      25 56 5200
      25 71 6300
      25 80 6900
      25 95 7900
      25 120 9300
      30 40 5700
      30 45 6400
      30 50 7000
      30 56 7600
      30 71 9300
      30 75 9800
      30 80 10400
      30 95 11900
      30 105 12800
      30 120 14200
      30 140 16000
      30 160 17700
      32 40 5800
      32 45 6400
      32 50 7100
      32 56 7700
      32 71 9400
      32 75 9900
      32 80 10500
      32 95 12000
      32 105 12900
      32 120 14300
      32 140 16100
      32 160 17800
      38 45 7500
      38 50 8200
      38 56 8900
      38 63 10300
      38 80 12100
      38 95 13900
      38 105 15000
      38 120 16700
      38 140 18700
      38 160 20700
      38 180 22600
      38 200 24400
      38 240 28000
      40 45 7500
      40 50 8200
      40 56 9000
      40 63 10300
      40 80 12200
      40 95 14000
      40 105 15100
      40 120 16700
      40 140 18800
      40 160 20800
      40 180 22700
      40 200 24600
      40 240 28000
      48 50 9400
      48 63 11700
      48 80 13800
      48 95 15900
      48 105 17100
      48 120 19000
      48 140 21400
      48 160 23600
      48 180 26000
      48 200 28000
      48 240 32000
      50 50 9400
      50 63 11700
      50 80 13900
      50 95 15900
      50 105 17200
      50 120 19100
      50 140 21400
      50 160 23700
      50 180 26000
      50 200 28000
      50 240 32000
      60 95 17700
      60 105 19200
      60 120 21300
      60 140 23900
      60 160 26500
      60 180 29000
      60 200 31000
      60 240 35500
      63 95 17800
      63 105 19300
      63 120 21300
      63 140 24000
      63 160 26500
      63 180 29000
      63 200 31500
      63 240 35500
      80 120 41000
      80 140 46500
      80 160 52000
      80 180 57000
      80 200 62000
      80 240 70000
      subject to alterations
      Safe Loads for FIBRO Ball Bearing Guides
      Tables of Dynamic Load Indexes
      Definition:
      The dynamic load index C constitutes a constant loading that will allow the respective sizes of ball bearing guides to reach + 10 5 m without any discernible
      bearing damage. The load index is shown in N and results from tests executed with batches of sufficient size, subjected to linear travel oscillations and
      radially imposed loads of constant magnitude and unchanging direction.
      Pillar [ d 1 Cage length l 1
      Dynamic Load Index C
      for whole cage (N)
      Pillar [ d 1 Cage length l 1
      Dynamic Load Index C
      for whole cage (N)
      D291
      1
      d
      R 10
      Z
      min.
      2
      l
      H5
      js4 2
      d
      1
      d
      5
      d
      min.
      5
      t
      R 10
      Z
      +1
      2021.43.
      1
      d
      H5
      js4 3
      d
      R 10
      Z
      min.
      2
      l
      H6
      j6 2
      d
      1
      d
      8
      d
      min.
      5
      t
      R 10
      Z
      +1
      2021.43.
      202.17. / 202.19. / 202.22. / 202.23. / 202.24. /
      202.29.
      3-80
      –0,025
      –0,035
      –0,015
      –0,025
      2021.46. / 2021.44.
      d 5 +1 l 2 t 5
      15/16 15/16 +0,008 24 20,5 6,5
      19/20 19/20 +0,009 27 23,5 6,5
      24/25 24/25 +0,009 34 30,5 6,5
      30/32 30/32 +0,011 42 37,5 6,5
      38/40 38/40 +0,011 52 37,5 6,5
      48/50 48/50 +0,013 62 47,5 6,5
      60/63 60/63 +0,013 72 47,5 6,5
      80 80 +0,013 95 60,5 12,5
      2021.39.
      d 1 d 3 H5
      19/20 32 +0,011
      24/25 40 +0,011
      30/32 48 +0,011
      38/40 58 +0,013
      48/50 70 +0,013
      60/63 85 +0,015
      2021.29.
      d 8 +1 l 2 t 5
      15/16 15/16 +0,011 24 20,5 6,5
      19/20 19/20 +0,013 27 23,5 6,5
      24/25 24/25 +0,013 34 30,5 6,5
      30/32 30/32 +0,016 42 37,5 6,5
      38/40 38/40 +0,016 52 37,5 6,5
      48/50 48/50 +0,019 62 47,5 6,5
      60/63 60/63 +0,019 72 47,5 6,5
      80 80 +0,019 95 60,5 12,5
      subject to alterations
      Assembly of Guide Elements –
      Dimensional Requirements and Tolerances
      202.17. / 202.19. /
      202.22. / 202.23. /
      202.24. / 202.29.
      Guide pillar-
      DIN 9825/ISO 9182-2
      ~DIN 9825/
      ~ISO 9182-2
      (press fit)
      2021.46. / 2021.44.
      Demountable guide
      pillar with collar
      DIN 9825/
      ~ISO 9182-5
      (transition fit)
      2021.39.
      Liner bush
      DIN 9825/ISO 9182-4
      (transition fit)
      2021.29.
      Guide pillar with
      collar
      (transition fit)
      Pillar x d 1 *
      Retaining bore d 1
      (recommended values based on experiences)
      in grey cast iron: d 1
      in steel: d 1
      * Pillars of d 1 = 50 mm and over should be frozen in dry ice before fitting
      Pillar x d 1 Retaining bore d 2 H5
      Pillar x Retaining bore
      Pillar x d 1 Retaining bore d 2 H6
      12.2016
      1
      d
      R 10
      Z
      min.
      2
      l
      H5
      js4 2
      d
      1
      d
      5
      d
      min.
      5
      t
      R 10
      Z
      +1
      1
      d
      H5
      js4 3
      d
      R 10
      Z
      min.
      2
      l
      H5
      j6 2
      d
      1
      d
      8
      d
      min.
      5
      t
      R 10
      Z
      +1
      202.17. / 202.19. / 202.22. / 202.23. / 202.24. /
      202.29.
      3-80
      –0,025
      –0,035
      –0,015
      –0,025
      2021.46. / 2021.44.
      d 5 +1 l 2 t 5
      15/16 15/16 +0,008 24 20,5 6,5
      19/20 19/20 +0,009 27 23,5 6,5
      24/25 24/25 +0,009 34 30,5 6,5
      30/32 30/32 +0,011 42 37,5 6,5
      38/40 38/40 +0,011 52 37,5 6,5
      48/50 48/50 +0,013 62 47,5 6,5
      60/63 60/63 +0,013 72 47,5 6,5
      80 80 +0,013 95 60,5 12,5
      2021.39.
      d 1 d 3 H5
      19/20 32 +0,011
      24/25 40 +0,011
      30/32 48 +0,011
      38/40 58 +0,013
      48/50 70 +0,013
      60/63 85 +0,015
      2021.29.
      d 8 +1 l 2 t 5
      15/16 15/16 +0,008 24 20,5 6,5
      19/20 19/20 +0,009 27 23,5 6,5
      24/25 24/25 +0,009 34 30,5 6,5
      30/32 30/32 +0,011 42 37,5 6,5
      38/40 38/40 +0,011 52 37,5 6,5
      48/50 48/50 +0,013 62 47,5 6,5
      60/63 60/63 +0,013 72 47,5 6,5
      80 80 +0,013 95 60,5 12,5
      subject to alterations
      Assembly of Guide Elements –
      Dimensional Requirements and Tolerances
      202.17. / 202.19. /
      202.22. / 202.23. /
      202.24. / 202.29.
      Guide pillar-
      DIN 9825/ISO 9182-2
      ~DIN 9825/
      ~ISO 9182-2
      (press fit)
      2021.46. / 2021.44.
      Demountable guide
      pillar with collar
      DIN 9825/
      ~ISO 9182-5
      (transition fit)
      2021.39.
      Liner bush
      DIN 9825/ISO 9182-4
      (transition fit)
      2021.29.
      Guide pillar with
      collar
      (transition fit)
      Pillar x d 1 *
      Retaining bore d 1
      (recommended values based on experiences)
      in grey cast iron: d 1
      in steel: d 1
      * Pillars of d 1 = 50 mm and over should be frozen in dry ice before fitting
      Pillar x d 1 Retaining bore d 2 H5
      Pillar x Retaining bore
      Pillar x d 1 Retaining bore d 2 H5
      1
      d
      H5
      m5 3
      d
      R 10
      Z
      d 1
      3
      c
      1
      d
      3
      d
      H5
      js4
      R 10
      Z
      10
      Z
      R
      1
      d
      H5
      js4 3
      d
      3
      d
      10
      Z
      R
      1
      d
      210.39.
      16 28 +0,009
      20 32 +0,011
      25 40 +0,011
      32 50 +0,011
      40 63 +0,013
      50 80 +0,013
      63 90 +0,015
      202.60.
      19 25 +0,009 33
      25 30 +0,009 33
      32 36 +0,011 38
      40 46 +0,011 38
      2051.32.
      8 13,7 +0,008
      11/12 22 +0,009
      15/16 28 +0,009
      19/20 32 +0,011
      24/25 40 +0,011
      30/32 48 +0,011
      38/40 58 +0,013
      48/50 70 +0,013
      60/63 85 +0,015
      80 95,7 +0,015
      206.54. 2061.44. / 2061.47.
      3 7 +0,009 8 18 +0,008
      4 8 +0,009 10 22 +0,009
      5 10 +0,009 11/12 22 +0,009
      6 11 +0,011 15/16 28 +0,009
      8 14 +0,011 19/20 32 +0,011
      24/25 40 +0,011
      30/32 48 +0,011
      38/40 58 +0,013
      48/50 70 +0,013
      60/63 85 +0,015
      80 105 +0,015
      subject to alterations
      Assembly of Guide Elements –
      Dimensional Requirements and Tolerances
      210.39.
      Liner bushes,
      similar AFNOR
      (transition fit)
      Pillar x d 1
      Retaining bore
      d 3 H5
      202.60.
      Demountable guide
      pillars with centre
      collar
      (transition fit)
      Pillar x d 1
      Retaining bore
      d 3 H5
      Plattendicke
      c 3 –1
      2051.32.
      Sintered ferrite guide
      bushes
      DIN 9831 /
      ISO 9448-2
      slip-fit bonding*
      Pillar x d 1
      Retaining bore
      d 3 H5
      206.54.
      2061.44./2061.47.
      Ball bearing guide
      bushes
      DIN 9831 /
      ISO 9448-3
      slip-fit bonding*
      Pillar x d 1
      Retaining bore
      d
      3 H6
      Pillar x d 1
      Retaining bore
      d
      3 H5
      *Slip-Fit Bonding:
      The glue-line gap must not be smaller than 0,005 mm, or the adhesive will
      be wiped off the contact surfaces upon fitment.
      This would result in an unreliable bond.
      The available component tolerances do not always result in the minimum
      glue-line gap.
      This fact has to be born in mind when machining receiving bores,
      or alternatively corrections can be made on the assembly bench.
      D293
      1
      d
      H5
      js4 3
      d
      10
      Z
      R
      js4
      1
      d
      H5
      3
      d
      10
      Z
      R
      3 m5
      H6
      d
      10
      Z
      R
      1
      d
      1
      d
      H6
      j6 3
      d
      10
      Z
      R
      2081.3x. / 2081.4x. / 2081.8x.
      19/20 32 +0,011
      24/25 40 +0,011
      30/32 48 +0,011
      38/40 58 +0,013
      48/50 70 +0,013
      60/63 85 +0,015
      80 105 +0,015
      2091.3x. / 2091.4x.
      12 26 +0,009
      15/16 28 +0,009
      19/20 32 +0,011
      24/25 40 +0,011
      30/32 48 +0,011
      38/40 58 +0,013
      48/50 70 +0,013
      60/63 85 +0,015
      80 105 +0,015
      206.49.
      16 28 +0,013
      20 32 +0,016
      25 40 +0,016
      32 50 +0,016
      40 63 +0,019
      50 80 +0,019
      2081.7x. / 2081.9x.
      19/20 32 +0,016
      24/25 40 +0,016
      30/32 48 +0,016
      38/40 58 +0,019
      48/50 70 +0,019
      60/63 85 +0,022
      80 105 +0,022
      subject to alterations
      2081.3x. / 2081.4x. /
      2081.8x.
      Headed guide bushes,
      carbonitrided, bron-
      ze-coated sintered
      types or ball bearing
      types
      DIN 9831 / ISO 9448-6
      DIN 9831 / ISO 9448-7
      ISO 9448
      (transition fit)
      Pillar x d 1 Retaining bore d 3 H5
      2091.3x. / 2091.4x.
      Flanged guide
      bushes, carbonitrided
      sintered types or ball
      bearing types
      DIN 9831 / ISO 9448-4
      DIN 9831 / ISO 9448-5
      (transition fit)
      Pillar x d 1 Retaining bore d 3 H5
      206.49.
      Ball bearing guide
      bushes similar AFNOR
      slip-fit bonding*
      Pillar x d 1 Retaining bore d 3 H6
      2081.7x. / 2081.9x.
      Headed guide bushes,
      bronze, with solid lu-
      bricant rings, bronze
      plated
      (transition fit)
      Pillar x d 1 Retaining bore d 3 H6
      *Slip-Fit Bonding:
      The glue-line gap must not be smaller than 0,005 mm, or the adhesive will
      be wiped off the contact surfaces upon fitment.
      This would result in an unreliable bond.
      The available component tolerances do not always result in the minimum
      glue-line gap.
      This fact has to be born in mind when machining receiving bores,
      or alternatively corrections can be made on the assembly bench.
      Assembly of Guide Elements –
      Dimensional Requirements and Tolerances
      D294
      1
      d
      3
      d
      10
      Z
      R
      j6
      H6
      10
      Z
      R
      M6
      h5 1
      d
      H7
      r6 1
      d
      H6
      r6 1
      d
      2091.7x.
      19/20 32 +0,016
      24/25 40 +0,016
      30/32 48 +0,016
      38/40 58 +0,019
      48/50 70 +0,019
      60/63 85 +0,022
      80 105 +0,022
      2022.25.
      25
      -0,004
      -0,017
      32
      -0,004
      -0,020
      40
      50
      63 -0,005
      -0,024 80
      100
      -0,006
      -0,028
      2022.12. / 2022.15. / 2022.16. / 2022.17. /
      2022.19. / 2022.29.
      25
      +0,021
      0
      32
      +0,025
      0
      40
      50
      63 +0,030
      0 80
      100
      +0,035
      0
      125 +0,040
      0 160
      2022.13.
      40 +0,016
      0 50
      63 +0,019
      0 80
      subject to alterations
      2091.7x.
      Guide bush with
      solid lubrication
      rings DIN 9831 /
      ISO 9448-4
      (transition fit)
      Pillar x d 1 Retaining bore d 3 H6
      2022.25.
      Guide pillar AFNOR
      (transition fit)
      Pillar x d 1 Retaining bore d 1 M6
      2022.12. / 2022.15. /
      2022.16. / 2022.17. /
      2022.19. / 2022.29.
      Guide pillar
      DIN 9833/ISO 9182-3
      Mercedes-Benz /
      VDI / VW / WDX
      (press fit)
      Pillar x d 1 Retaining bore d 1 H7
      Pillars of d 1 = 50 mm and over should be frozen in dry ice before fitting
      2022.13.
      Guide pillar VW
      (press fit)
      Pillar x d 1 Bohrung d 1 H6
      Pillars of d 1 = 50 mm and over should be frozen in dry ice before fitting
      Assembly of Guide Elements –
      Dimensional Requirements and Tolerances
      1
      d
      H5
      js4 3
      d
      10
      Z
      R
      js4
      1
      d
      H5
      3
      d
      10
      Z
      R
      3 m5
      H6
      d
      10
      Z
      R
      1
      d
      1
      d
      H6
      j6 3
      d
      10
      Z
      R
      2081.3x. / 2081.4x. / 2081.8x.
      19/20 32 +0,011
      24/25 40 +0,011
      30/32 48 +0,011
      38/40 58 +0,013
      48/50 70 +0,013
      60/63 85 +0,015
      80 105 +0,015
      2091.3x. / 2091.4x.
      12 26 +0,009
      15/16 28 +0,009
      19/20 32 +0,011
      24/25 40 +0,011
      30/32 48 +0,011
      38/40 58 +0,013
      48/50 70 +0,013
      60/63 85 +0,015
      80 105 +0,015
      206.49.
      16 28 +0,013
      20 32 +0,016
      25 40 +0,016
      32 50 +0,016
      40 63 +0,019
      50 80 +0,019
      2081.7x. / 2081.9x.
      19/20 32 +0,016
      24/25 40 +0,016
      30/32 48 +0,016
      38/40 58 +0,019
      48/50 70 +0,019
      60/63 85 +0,022
      80 105 +0,022
      subject to alterations
      2081.3x. / 2081.4x. /
      2081.8x.
      Headed guide bushes,
      carbonitrided, bron-
      ze-coated sintered
      types or ball bearing
      types
      DIN 9831 / ISO 9448-6
      DIN 9831 / ISO 9448-7
      ISO 9448
      (transition fit)
      Pillar x d 1 Retaining bore d 3 H5
      2091.3x. / 2091.4x.
      Flanged guide
      bushes, carbonitrided
      sintered types or ball
      bearing types
      DIN 9831 / ISO 9448-4
      DIN 9831 / ISO 9448-5
      (transition fit)
      Pillar x d 1 Retaining bore d 3 H5
      206.49.
      Ball bearing guide
      bushes similar AFNOR
      slip-fit bonding*
      Pillar x d 1 Retaining bore d 3 H6
      2081.7x. / 2081.9x.
      Headed guide bushes,
      bronze, with solid lu-
      bricant rings, bronze
      plated
      (transition fit)
      Pillar x d 1 Retaining bore d 3 H6
      *Slip-Fit Bonding:
      The glue-line gap must not be smaller than 0,005 mm, or the adhesive will
      be wiped off the contact surfaces upon fitment.
      This would result in an unreliable bond.
      The available component tolerances do not always result in the minimum
      glue-line gap.
      This fact has to be born in mind when machining receiving bores,
      or alternatively corrections can be made on the assembly bench.
      Assembly of Guide Elements –
      Dimensional Requirements and Tolerances
      1
      d
      3
      d
      10
      Z
      R
      j6
      H6
      10
      Z
      R
      M6
      h5 1
      d
      H7
      r6 1
      d
      H6
      r6 1
      d
      2091.7x.
      19/20 32 +0,016
      24/25 40 +0,016
      30/32 48 +0,016
      38/40 58 +0,019
      48/50 70 +0,019
      60/63 85 +0,022
      80 105 +0,022
      2022.25.
      25
      -0,004
      -0,017
      32
      -0,004
      -0,020
      40
      50
      63 -0,005
      -0,024 80
      100
      -0,006
      -0,028
      2022.12. / 2022.15. / 2022.16. / 2022.17. /
      2022.19. / 2022.29.
      25
      +0,021
      0
      32
      +0,025
      0
      40
      50
      63 +0,030
      0 80
      100
      +0,035
      0
      125 +0,040
      0 160
      2022.13.
      40 +0,016
      0 50
      63 +0,019
      0 80
      subject to alterations
      2091.7x.
      Guide bush with
      solid lubrication
      rings DIN 9831 /
      ISO 9448-4
      (transition fit)
      Pillar x d 1 Retaining bore d 3 H6
      2022.25.
      Guide pillar AFNOR
      (transition fit)
      Pillar x d 1 Retaining bore d 1 M6
      2022.12. / 2022.15. /
      2022.16. / 2022.17. /
      2022.19. / 2022.29.
      Guide pillar
      DIN 9833/ISO 9182-3
      Mercedes-Benz /
      VDI / VW / WDX
      (press fit)
      Pillar x d 1 Retaining bore d 1 H7
      Pillars of d 1 = 50 mm and over should be frozen in dry ice before fitting
      2022.13.
      Guide pillar VW
      (press fit)
      Pillar x d 1 Bohrung d 1 H6
      Pillars of d 1 = 50 mm and over should be frozen in dry ice before fitting
      Assembly of Guide Elements –
      Dimensional Requirements and Tolerances
      D295
      1
      d
      m6 2
      d
      1
      d
      H7
      r6 2
      d
      1
      d
      G7
      k6 2
      d
      10 14 +0,018
      0 12 18
      13 19
      +0,021
      0
      14 20
      15 21
      16 22
      20 30
      25 35
      +0,025
      0
      30 40
      31,5 40
      35 45
      40 50
      45 55
      +0,030
      0
      50 60
      55 65
      60 75
      63 75
      70 85
      +0,035
      0
      75 90
      80 100
      90 110
      100 120
      120 140
      +0,040
      0
      2052.70. 1) / 2086.70. / 2085.72.
      8 12
      +0,024
      +0,006
      +0,018
      0
      10 14/15
      12 18
      13 19
      +0,028
      +0,007
      +0,021
      0
      14 20
      15 21
      16 22
      18/19 24/25
      20 26/28/30
      25 32/33/35
      +0,034
      +0,009
      +0,025
      0
      28 38
      30 38/40/42
      31,5 40
      32 42
      35 44/45
      38 48
      40 50
      40 55
      +0,040
      +0,010
      +0,030
      0
      45 55/56/60
      50 60/62/65
      55 70
      60 74/75
      63 75
      65 80
      70 85/90
      +0,047
      +0,012
      +0,035
      0
      75 90/95
      80 96/100
      85 100
      90 110
      100 120
      110 130
      +0,054
      +0,014
      +0,040
      0
      120 140
      125 145
      130 150
      140 160
      150 170
      160 180
      2085.70.
      12 16
      +0,024
      +0,006
      16 20
      +0,028
      +0,007
      20 26
      24 30
      2085.71.
      subject to alterations
      Pillar x d 1
      Retaining
      bore d 2
      limits d 2 H7 Pillar x d 1
      Retaining
      bore d 2
      limits d 2 H7
      Pillar x d 1
      Retaining bore
      d 2
      bonding limitsd 2 G7
      Transition fit limits
      d 2 H7
      2052.70. 1) / 2086.70. /
      2085.72.
      Guide Bushes/
      Guide Bushes with
      collar, Bronze with
      non-liquid lubricant
      slip-fit bonding*:
      Retaining bore d 2 = G7
      transition fit:
      Retaining bore d 2 = H7
      1) if required secure with set screw
      2085.71.
      Guide Bushes with
      collar, Bronze with
      non-liquid lubricant
      (press fit)
      Pillar x d 1 Retaining bore d 2 G7 limits d 2 G7
      2085.70.
      Guide Bushes with
      collar, Bronze with
      non-liquid lubricant
      (transition fit)
      *Slip-Fit Bonding:
      The glue-line gap must not be smaller than 0,005 mm, or the adhesive will
      be wiped off the contact surfaces upon fitment.
      This would result in an unreliable bond.
      The available component tolerances do not always result in the minimum
      glue-line gap.
      This fact has to be born in mind when machining receiving bores,
      or alternatively corrections can be made on the assembly bench.
      Assembly of Guide Elements –
      Dimensional Requirements and Tolerances
      D296
      1
      d
      H7
      g6 2
      d
      1
      d
      H6
      m6 2
      d
      1
      d
      H7
      h6 2
      d
      2102.70. / 2102.71.
      25 35 +0,016
      0 32 44
      40 52
      +0,019
      0
      50 63
      63 80
      80 100
      +0,022
      0
      100 125
      +0,025
      0
      2082.70.
      24/25 32/35
      +0,025
      0
      30/32 40/42
      38/40 50
      48/50 63 +0,030
      0 60/63 80
      80 100
      +0,035
      0
      100 125 +0,040
      0 125 160
      160 200
      +0,046
      0
      2082.71. / 2086.71.
      25/32/40 32/40/50
      +0,025
      0
      50/63 63/80
      +0,030
      0
      80 100
      +0,035
      0
      100/125 125/160
      +0,040
      0
      subject to alterations
      2082.71. / 2086.71.
      Guide Bush with
      collar to NAAMS,
      bronze with non-
      liquid lubricant
      (slip fit)
      2102.70. / 2102.71.
      Guide Bushes with
      collar, bronze with
      non-liquid lubricant/
      bronze, CNOMO
      (transition fit)
      Pillar [ d 1 Retaining bore d 2 H6 limits d 2 H6
      2082.70.
      Guide Bushes with
      collar, bronze with
      non-liquid lubricant
      DIN 9834/ISO 9448
      (slip fit)
      Pillar [ d 1 Retaining bore d 2 H7 limits d 2 H7
      Pillar [ d 1 Retaining bore d 2 H7 limits d 2 H7
      Assembly of Guide Elements –
      Dimensional Requirements and Tolerances
      1
      d
      m6 2
      d
      1
      d
      H7
      r6 2
      d
      1
      d
      G7
      k6 2
      d
      10 14 +0,018
      0 12 18
      13 19
      +0,021
      0
      14 20
      15 21
      16 22
      20 30
      25 35
      +0,025
      0
      30 40
      31,5 40
      35 45
      40 50
      45 55
      +0,030
      0
      50 60
      55 65
      60 75
      63 75
      70 85
      +0,035
      0
      75 90
      80 100
      90 110
      100 120
      120 140
      +0,040
      0
      2052.70. 1) / 2086.70. / 2085.72.
      8 12
      +0,024
      +0,006
      +0,018
      0
      10 14/15
      12 18
      13 19
      +0,028
      +0,007
      +0,021
      0
      14 20
      15 21
      16 22
      18/19 24/25
      20 26/28/30
      25 32/33/35
      +0,034
      +0,009
      +0,025
      0
      28 38
      30 38/40/42
      31,5 40
      32 42
      35 44/45
      38 48
      40 50
      40 55
      +0,040
      +0,010
      +0,030
      0
      45 55/56/60
      50 60/62/65
      55 70
      60 74/75
      63 75
      65 80
      70 85/90
      +0,047
      +0,012
      +0,035
      0
      75 90/95
      80 96/100
      85 100
      90 110
      100 120
      110 130
      +0,054
      +0,014
      +0,040
      0
      120 140
      125 145
      130 150
      140 160
      150 170
      160 180
      2085.70.
      12 16
      +0,024
      +0,006
      16 20
      +0,028
      +0,007
      20 26
      24 30
      2085.71.
      subject to alterations
      Pillar x d 1
      Retaining
      bore d 2
      limits d 2 H7 Pillar x d 1
      Retaining
      bore d 2
      limits d 2 H7
      Pillar x d 1
      Retaining bore
      d 2
      bonding limitsd 2 G7
      Transition fit limits
      d 2 H7
      2052.70. 1) / 2086.70. /
      2085.72.
      Guide Bushes/
      Guide Bushes with
      collar, Bronze with
      non-liquid lubricant
      slip-fit bonding*:
      Retaining bore d 2 = G7
      transition fit:
      Retaining bore d 2 = H7
      1) if required secure with set screw
      2085.71.
      Guide Bushes with
      collar, Bronze with
      non-liquid lubricant
      (press fit)
      Pillar x d 1 Retaining bore d 2 G7 limits d 2 G7
      2085.70.
      Guide Bushes with
      collar, Bronze with
      non-liquid lubricant
      (transition fit)
      *Slip-Fit Bonding:
      The glue-line gap must not be smaller than 0,005 mm, or the adhesive will
      be wiped off the contact surfaces upon fitment.
      This would result in an unreliable bond.
      The available component tolerances do not always result in the minimum
      glue-line gap.
      This fact has to be born in mind when machining receiving bores,
      or alternatively corrections can be made on the assembly bench.
      Assembly of Guide Elements –
      Dimensional Requirements and Tolerances
      1
      d
      H7
      g6 2
      d
      1
      d
      H6
      m6 2
      d
      1
      d
      H7
      h6 2
      d
      2102.70. / 2102.71.
      25 35 +0,016
      0 32 44
      40 52
      +0,019
      0
      50 63
      63 80
      80 100
      +0,022
      0
      100 125
      +0,025
      0
      2082.70.
      24/25 32/35
      +0,025
      0
      30/32 40/42
      38/40 50
      48/50 63 +0,030
      0 60/63 80
      80 100
      +0,035
      0
      100 125 +0,040
      0 125 160
      160 200
      +0,046
      0
      2082.71. / 2086.71.
      25/32/40 32/40/50
      +0,025
      0
      50/63 63/80
      +0,030
      0
      80 100
      +0,035
      0
      100/125 125/160
      +0,040
      0
      subject to alterations
      2082.71. / 2086.71.
      Guide Bush with
      collar to NAAMS,
      bronze with non-
      liquid lubricant
      (slip fit)
      2102.70. / 2102.71.
      Guide Bushes with
      collar, bronze with
      non-liquid lubricant/
      bronze, CNOMO
      (transition fit)
      Pillar [ d 1 Retaining bore d 2 H6 limits d 2 H6
      2082.70.
      Guide Bushes with
      collar, bronze with
      non-liquid lubricant
      DIN 9834/ISO 9448
      (slip fit)
      Pillar [ d 1 Retaining bore d 2 H7 limits d 2 H7
      Pillar [ d 1 Retaining bore d 2 H7 limits d 2 H7
      Assembly of Guide Elements –
      Dimensional Requirements and Tolerances
      D297
      1
      d
      H7
      e7, f7 2
      d
      H7
      h6, k6 2
      d
      1
      d
      e7 2
      d
      H7
      k6 2
      d
      1
      d
      H7
      g6 2
      d
      3120.70. / 3120.71.
      8 12
      +0,018
      0
      10 14/15
      12 18
      13 19
      +0,021
      0
      14 20
      15 21
      16 22
      18/19 24/25
      20 26/28/30
      25 32/33/35
      +0,025
      0
      28 38
      30 38/40/42
      31,5 40
      32 42
      35 44/45
      38 48
      40 50
      40 55
      +0,030
      0
      45 55/56/60
      50 60/62/65
      55 70
      60 74/75
      63 75
      65 80
      70 85/90
      +0,035
      0
      75 90/95
      80 96/100
      85 100
      90 110
      100 120
      110 130
      +0,040
      0
      120 140
      125 145
      130 150
      140 160
      150 170
      160 180
      2087.72.
      9/10 14 +0,018
      0 12 18
      14/15 20
      +0,021
      0
      16 22
      18/20 26
      22/24 30
      25 32 +0,025
      0 30/32 42
      40/42 54
      +0,030
      0
      50 66
      60 80
      2087.70. / 2087.71. / 2087.73.
      9/10 14
      +0,018
      0
      14/15 20
      +0,021
      0
      18/20 26
      22/24 30
      25 35
      +0,025
      0
      30/32 42
      40 50
      40/42 54
      +0,030
      0
      50 63
      60 80
      63 80
      subject to alterations
      Pillar [ d 1 Retaining bore d 2 H7 limits d 2 H7
      2087.70. / 2087.71. /
      2087.73.
      Guide Bushes with
      centre collar/ with
      collar, bronze with
      non-liquid lubricant
      e7 = slip fit
      f7 = slip fit
      h6 = slip fit
      k6 = transition fit
      2087.72.
      Guide Bushes with
      collar, bronze with
      non-liquid lubricant
      e7 = slip fit
      k6 = transition fit
      Pillar [ d 1 Retaining bore d 2 H7 limits d 2 H7
      Pillar [ d 1 Retaining bore d 2 H7 limits d 2 H7
      3120.70. / 3120.71.
      Guide Bushes, bronze
      with non-liquid
      lubricant
      slip fit
      bond in or if required secure with
      set screw or flat mushroom head
      screw 2192.61.
      Assembly of Guide Elements –
      Dimensional Requirements and Tolerances
      D298
      1
      d
      H7
      e7, f7 2
      d
      H7
      h6, k6 2
      d
      1
      d
      e7 2
      d
      H7
      k6 2
      d
      1
      d
      H7
      g6 2
      d
      3120.70. / 3120.71.
      8 12
      +0,018
      0
      10 14/15
      12 18
      13 19
      +0,021
      0
      14 20
      15 21
      16 22
      18/19 24/25
      20 26/28/30
      25 32/33/35
      +0,025
      0
      28 38
      30 38/40/42
      31,5 40
      32 42
      35 44/45
      38 48
      40 50
      40 55
      +0,030
      0
      45 55/56/60
      50 60/62/65
      55 70
      60 74/75
      63 75
      65 80
      70 85/90
      +0,035
      0
      75 90/95
      80 96/100
      85 100
      90 110
      100 120
      110 130
      +0,040
      0
      120 140
      125 145
      130 150
      140 160
      150 170
      160 180
      2087.72.
      9/10 14 +0,018
      0 12 18
      14/15 20
      +0,021
      0
      16 22
      18/20 26
      22/24 30
      25 32 +0,025
      0 30/32 42
      40/42 54
      +0,030
      0
      50 66
      60 80
      2087.70. / 2087.71. / 2087.73.
      9/10 14
      +0,018
      0
      14/15 20
      +0,021
      0
      18/20 26
      22/24 30
      25 35
      +0,025
      0
      30/32 42
      40 50
      40/42 54
      +0,030
      0
      50 63
      60 80
      63 80
      subject to alterations
      Pillar [ d 1 Retaining bore d 2 H7 limits d 2 H7
      2087.70. / 2087.71. /
      2087.73.
      Guide Bushes with
      centre collar/ with
      collar, bronze with
      non-liquid lubricant
      e7 = slip fit
      f7 = slip fit
      h6 = slip fit
      k6 = transition fit
      2087.72.
      Guide Bushes with
      collar, bronze with
      non-liquid lubricant
      e7 = slip fit
      k6 = transition fit
      Pillar [ d 1 Retaining bore d 2 H7 limits d 2 H7
      Pillar [ d 1 Retaining bore d 2 H7 limits d 2 H7
      3120.70. / 3120.71.
      Guide Bushes, bronze
      with non-liquid
      lubricant
      slip fit
      bond in or if required secure with
      set screw or flat mushroom head
      screw 2192.61.
      Assembly of Guide Elements –
      Dimensional Requirements and Tolerances
      A
      B
      C
      D
      E
      F
      G
      H
      J
      K
      L
      Die Sets
      Precision Ground Plates and Flat Bars
      Lifting and Clamping Devices
      Guide elements
      Ground Precision Components
      Springs
      Elastomer-Bars, -Sheets, -Sections
      FIBRO Chemical Tooling Aids
      Peripheral Equipment
      Cam Units
      Standard Parts for Mould Making
      Ground Precision Components
      Punches and matrixes, Pins, gauge pins
      Ground
      Precision
      Components
      E2 subject to alterations
      Ground Precision Components
      FIBRO Precision Components cover a very wide
      range of materials, shapes and sizes and thus
      permit virtually unrestricted selection even to
      highly individual requirements.
      At Hassmersheim and also abroad, stock
      levels of Precision Components reach seven-
      digit figures. It is therefore quite likely that
      your particular choice will be available for
      immediate delivery. Should this not be the case
      then our flexible batch production schedules
      will ensure that delays are kept to a minimum.
      Batch production in our interpretation not only
      spells prompt delivery but also exceptional
      quality. Starting with the arrival inspection
      of raw materials, every single manufacturing
      operation on FIBRO Precision Components
      is followed by a quality check. Lastly, an
      uncompromising final inspection of each and
      every part guarantees that the trade mark
      FIBRO is and remains synonymous with Quality.
      In view of the fact that a large portion of the
      Precision Components programme consists
      of punches and matrices, the importance
      of alignment in the operational die must be
      emphasized. Unless this requirement can be
      met to a high degree of accuracy, even the
      finest efforts in design and in the toolroom
      must fail! Die alignment ultimately depends
      on the guides – FIBRO Die Sets and Guide
      Elements were developed and are made with
      this postulate in mind.
      Tool life, production cost and work quality are
      to a large extent a function of tooling material
      selection versus strip stock characteristics
      and ancillary process conditions. A judicious
      choice from the wide range of materials for
      our punches and matrices will be facilitated by
      the orientation guide in this catalogue. Listing
      the principal characteristics of each material
      together with selection criteria, it is intended
      to help customers make the right choice.
      Our experienced tooling specialists will assist
      you with further detailed information.
      In keeping with the basic tenet of our firm,
      every effort is made to ensure that design,
      performance potential and quality of FIBRO
      Precision Components keep well abreast with
      latest technological developments.
      Ground
      Precision
      Components
      subject to alterations
      Ground Precision Components
      FIBRO Precision Components cover a very wide
      range of materials, shapes and sizes and thus
      permit virtually unrestricted selection even to
      highly individual requirements.
      At Hassmersheim and also abroad, stock
      levels of Precision Components reach seven-
      digit figures. It is therefore quite likely that
      your particular choice will be available for
      immediate delivery. Should this not be the case
      then our flexible batch production schedules
      will ensure that delays are kept to a minimum.
      Batch production in our interpretation not only
      spells prompt delivery but also exceptional
      quality. Starting with the arrival inspection
      of raw materials, every single manufacturing
      operation on FIBRO Precision Components
      is followed by a quality check. Lastly, an
      uncompromising final inspection of each and
      every part guarantees that the trade mark
      FIBRO is and remains synonymous with Quality.
      In view of the fact that a large portion of the
      Precision Components programme consists
      of punches and matrices, the importance
      of alignment in the operational die must be
      emphasized. Unless this requirement can be
      met to a high degree of accuracy, even the
      finest efforts in design and in the toolroom
      must fail! Die alignment ultimately depends
      on the guides – FIBRO Die Sets and Guide
      Elements were developed and are made with
      this postulate in mind.
      Tool life, production cost and work quality are
      to a large extent a function of tooling material
      selection versus strip stock characteristics
      and ancillary process conditions. A judicious
      choice from the wide range of materials for
      our punches and matrices will be facilitated by
      the orientation guide in this catalogue. Listing
      the principal characteristics of each material
      together with selection criteria, it is int